**** BEGIN LOGGING AT Tue Nov 10 02:59:57 2009
Nov 10 05:12:24 <monkey_>  hello?
Nov 10 05:22:06 <nullpuppy> yo.
Nov 10 05:23:58 <monkey_> hey
Nov 10 05:24:19 <monkey_> got a maybe a quick question... 
Nov 10 05:24:20 <monkey_> Error:   jtag.c:1351 jtag_examine_chain(): JTAG communication failure, check connection, JTAG interface, target power etc.
Nov 10 05:24:23 <monkey_> Error:   jtag.c:1556 jtag_init_inner(): trying to validate configured JTAG chain anyway...
Nov 10 05:24:26 <monkey_> Error:   jtag.c:1444 jtag_validate_chain(): Error validating JTAG scan chain, IR mismatch, scan returned 0x3f
Nov 10 05:24:52 <monkey_> it's an olimex lpc2378 board and and an arm-usb-ocd from olimex too
Nov 10 05:29:21 <monkey_> here is my config http://pastebin.ca/1663448
Nov 10 06:25:17 <monkey_> i g/g to bed, but if anyone has any ideas please let me know
Nov 10 07:18:43 <Spida> roxfan: thx
Nov 10 09:13:20 <roxfan> monkey_: most likely bad connection or misconfigured interface
Nov 10 11:16:08 <poine_> hello world
Nov 10 12:09:09 <poine_> I'm trying to run openocd with a FT2232H and I'm almost bald by now
Nov 10 12:16:37 <poine_> do I need to build with ft2xx in oirder to be able to use a ft2232h ?
Nov 10 14:46:59 <poine42> i found a bug!!!!
Nov 10 14:48:07 <poine42> scripts/interface/openocd-usb.cfg
Nov 10 14:48:16 <poine42> this file suggest a schematics
Nov 10 14:48:23 <poine42> http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html
Nov 10 14:48:55 <poine42> and a layout that are not the same
Nov 10 14:48:57 <poine42> ft2232_layout "oocdlink"
Nov 10 14:49:04 <poine42> the layout should be
Nov 10 14:49:14 <poine42> ft2232_layout "usbjtag"
Nov 10 14:49:37 <poine42> anybody who is both alive and has write access ?
Nov 10 14:55:40 <poine42> is there anybody out there ?
**** BEGIN LOGGING AT Tue Nov 10 19:53:47 2009
Nov 10 19:54:38 <poine42> good evening world
Nov 10 19:54:52 <poine42> I'm calling to notify a bug and its solution
Nov 10 19:54:57 <poine42> scripts/interface/openocd-usb.cfg suggest a schematics : http://www.hs-augsburg.de/~hhoegl/proj/usbjtag/usbjtag.html and a layout (  ft2232_layout "oocdlink" ) which are not compatible. the correct layout isft2232_layout "usbjtag" 
Nov 10 19:55:12 <poine42> can anyby with write access fix it ?
**** ENDING LOGGING AT Wed Nov 11 02:59:56 2009