**** BEGIN LOGGING AT Mon Aug 29 02:59:57 2011 Aug 29 07:19:31 hi all Aug 29 07:21:37 hash anyone here has already used the GoodFet hardware with OpenOCD? (I'm trying to connect to an xscale target with a goodfet 31) Aug 29 07:22:11 and thanks in advance for your help Aug 29 08:12:25 i don't think openocd supports goodfet Aug 29 08:13:48 hi roxfan, and thanks for your answer Aug 29 08:15:07 I'm asking because we can see traces of OpenOCD with GoodFet here : http://pastebin.com/PAFLqzXX Aug 29 08:17:15 it seems to be a private fork Aug 29 08:17:24 http://sourceforge.net/mailarchive/forum.php?thread_name=1297411808.3072.20.camel%40mycroft&forum_name=goodfet-devel Aug 29 08:18:26 thank you very much ! I'll try to get it and try Aug 29 08:19:33 by the way, what hardware would you recommend with OpenOCD? I was thinking to get the Amontec JTAGKey or the Bus Pirate Aug 29 08:19:56 any other ideas/recommendations? Aug 29 08:34:38 the Olimex one Aug 29 08:34:48 it has more voltages support, and a nice serial port Aug 29 08:34:57 but it is 4x the price Aug 29 08:38:34 thanks for the advice zoobab :-) Aug 29 12:50:26 hello Aug 29 12:50:58 is it possible to stop a running target from gdb and examine its state, without it hitting a breakpoint? Aug 29 12:58:12 Thorn: did you try ctrl+c? Aug 29 13:00:46 seems to work, thank you Aug 29 13:01:25 is there a command though? it would be nice to be able to send one from a logic analyzer client on t rigger Aug 29 13:02:24 mh, in this case you might want to connect to telnet port and use stop there. iirc gdb should detect that targets has stopped (from external event) Aug 29 13:05:00 yes, it prints Program received signal SIGINT, Interrupt. and PC value Aug 29 13:05:13 thank you, that's useful Aug 29 13:05:23 np **** ENDING LOGGING AT Tue Aug 30 02:15:47 2011 **** BEGIN LOGGING AT Tue Aug 30 02:16:14 2011 **** ENDING LOGGING AT Tue Aug 30 02:18:15 2011 **** BEGIN LOGGING AT Tue Aug 30 02:20:16 2011 **** ENDING LOGGING AT Tue Aug 30 02:59:57 2011