**** BEGIN LOGGING AT Mon Jan 18 02:59:56 2010 Jan 18 06:46:25 moin Jan 18 06:53:03 hi, want to update mplayer source code and build SHR testing image Jan 18 06:53:27 any one has idea, what needs to be update in openembedded/recipes folder ? Jan 18 06:53:55 ls openembedded/recipes/mplayer/ Jan 18 06:54:18 files mplayer-0.0+1.0rc1 mplayer-0.0+1.0rc2 mplayer-common mplayer_git.bb mplayer-maemo_svn.bb svn.known git.known mplayer_0.0+1.0rc1.bb mplayer_0.0+1.0rc2.bb mplayer-common.bb mplayer-maemo mplayer_svn.bb Jan 18 06:55:48 any clue ? Jan 18 06:57:02 satish: you want to find some config file used by shr-testing that specifies the version to use, then you change it to use AUTOREV. Wait for those who knows OE better than me :) Jan 18 06:57:26 ok.. Jan 18 06:57:49 bitbake files are picking source from net ... Jan 18 06:59:04 do we need to build this mplayer source code as part of SHR testing image and load on to freerunner ? Jan 18 06:59:42 or is it possible to install as module on freerunner after SHR image is loaded ? Jan 18 07:01:14 i don't want to build mplayer as part of SHR image......if possible i want to build it later and install/update as module on SHR image Jan 18 07:02:16 the later is convinient for my development and experiments....otherwise everytime i update i need to re-flash the device again Jan 18 07:03:47 any suggestions on how to proceed ? Jan 18 07:10:14 satish: sure.. no reason to reflash because of mplayer.. I'll explain later from work.. now I have to go Jan 18 07:15:36 DocScrutinizer: I noticed that there is a fault flag pin on the power switch between the battery and the modem. the fault flag pin is connected to a gpio on the s3c2442. I'm wondering if anything should be done(like poweroff) if that flag is ever going to be asserted. Jan 18 07:16:17 moin lars_ :) Jan 18 07:17:17 good morning josch Jan 18 07:18:08 JaMa : Thanks, when can i expect you online ...i mean after few hours ? Jan 18 07:57:01 PaulFertser: hm... I need an good idea how to solve the flow_controlled problem Jan 18 07:59:02 lars_: can you tell exactly what is the problem? Do not you like userspace forcing flow-controlled? Jan 18 07:59:35 i want to get rid of it, yes Jan 18 08:03:33 lars_: it seems that userspace should exlicitly make a statement that all bytes received after some point should either prevent suspend altogether or wake the device immediately after suspending. Jan 18 08:04:30 lars_: do you agree with this? If yes, then your question becomes "what is the most sane way to make that statement?", right? Jan 18 08:04:35 satish: still here? Jan 18 08:05:06 PaulFertser: yes Jan 18 08:05:34 satish: IIRC I already told you to use mplayer_git.bb Jan 18 08:05:49 i'm wondering if it would be legal to put the serial pins in "flow-controlled" mode if the console is not opened Jan 18 08:05:59 satish: and create patches against git://repo.or.cz/mplayer/glamo.git;protocol=git;branch=master Jan 18 08:06:40 satish: only thing needed to use your mplayer instead of the one in SHR feeds is to update revision_count in persistence db Jan 18 08:10:13 lars_: if using something like old gsm0710muxd it would be unfun, would require additional communication between framework and the daemon. Jan 18 08:11:38 lars_: also while the modem is powered off every pin connected to it must be low. Jan 18 08:12:51 satish: how to set persistent db is written here http://pastebin.ca/1755751 Jan 18 08:28:20 PaulFertser: hm Jan 18 08:35:29 PaulFertser: what's you opinion about the "fault flag" of the modems power switch? Jan 18 08:44:55 morning... Jan 18 08:45:03 moin Jan 18 08:45:25 hi Jan 18 08:57:41 lars_: i do not remember the details, need to see the datasheet and schematics. Jan 18 09:01:18 I can't find a fix in E source code history for the recent keyboard bug :( Jan 18 09:02:30 PaulFertser: http://www.digchip.com/datasheets/parts/datasheet/403/RT9702A-pdf.php Jan 18 09:03:56 JaMa, shall I make a temporary patch? :P Jan 18 09:06:55 lars_: i'm at work currently, can't exactly do it fast. Jan 18 09:11:29 PaulFertser: np Jan 18 09:13:37 i'm just wondering. if that pin triggers, something bad probably has already happend and we can't do anything anyway. Except maybe displaying a warning on the screen to throw the phone as far as possible away ;) Jan 18 09:14:39 lars_: that's roundabout the most useless gpio we ever wasted.kernel *might* print GPIOxyactive. oop. should never happen Jan 18 09:15:17 DocScrutinizer: thanks for confirming my assumtions Jan 18 09:16:25 lars_: we got same shit on USB switch once more Jan 18 09:18:26 daniele_athome: for what? Jan 18 09:18:49 JaMa: http://www.shr-project.org/trac/ticket/873 Jan 18 09:19:31 lars_: the usb one though may actually become meaningfull when we swap the switch chip for one with OVP - on gta02core Jan 18 09:19:51 OVP? Jan 18 09:19:53 hey lars_ :) Jan 18 09:20:05 hi teythoon Jan 18 09:20:06 overvoltage prot Jan 18 09:20:20 ok Jan 18 09:20:40 daniele_athome: I'm testing rev 45268 and I won't have time for any SHR work this week during work hours.. Jan 18 09:20:45 for now its overcurent and never can happen Jan 18 09:22:42 that's how tpe EE worked. 'a signal! lets route it to a GPIO' Jan 18 09:23:10 JaMa, I read every revision until yesterday and I don't see any fix for that... anyway I might be wrong Jan 18 09:25:54 DocScrutinizer: :) Jan 18 09:28:23 lars_: I suugest "GPIOxy: your baseband chips just emitted magic smoke" and "GPIOyz: something very odd with USB" Jan 18 09:29:40 or simply forget about it Jan 18 09:31:55 daniele_athome: maybe we will switch to illume2 instead :) Jan 18 09:32:15 DocScrutinizer: well, i'll choose later. but since the gpios which aren't claimed by kernel drivers are available in userspace FSO can step in :) Jan 18 09:32:38 JaMa, the issue is actually on elementary, but illume2 switch too is very good ;) Jan 18 09:32:41 lol Jan 18 09:33:28 daniele_athome: Someone said that the patch with onfocus and button in the commit message should fix the problem Jan 18 09:35:14 if there is someone willing to test 45268 i can provide images.. Jan 18 09:35:34 but at least shr-settings segfaults.. Jan 18 09:36:37 Heinervdm, do you remember if it's in the evas or in the elementary directory tree? Jan 18 09:37:02 daniele_athome: no, but i think the rev was with 27 at the end Jan 18 09:38:46 no wasn't one of those two Jan 18 09:39:43 I see Heinervdm Jan 18 09:41:19 45034 was the commit, but thats already in... Jan 18 09:41:26 Heinervdm, JaMa: this is the changeset http://trac.enlightenment.org/e/changeset/45034 Jan 18 09:41:31 that introduces the bug Jan 18 09:41:31 so perhaps that broke the thing Jan 18 09:41:43 :) Jan 18 10:06:41 raster: /join #maemo ? Jan 18 10:44:13 Heinervdm, I really can't find a fix in both elementary and evas trees Jan 18 10:44:16 :( Jan 18 10:49:12 my head's spinning from trying to compile a program for shr. is there a relatively straightforward guide out there? Jan 18 10:52:59 Heinervdm, I really can't find a fix in both elementary and evas trees Jan 18 10:53:12 badcloud, hi, use a bitbake recipe, it's the shortest way :) Jan 18 10:53:56 daniele_athome: i think it was the commit that introduced that bug Jan 18 10:54:18 Heinervdm, of course, but I can't understand what's that code for Jan 18 10:54:27 I will comment it for now... and recompile Jan 18 10:56:07 daniele_athome: thanks, but I think I'm missing a bit of know-how. I installed bitbake, but what format is a bb recipe and how do I know what "ingredients" to include? Jan 18 10:56:26 it depends on the source, I assume Jan 18 10:56:35 but I'm quite lost on the details Jan 18 10:57:42 ~seen raster Jan 18 10:57:43 raster is currently on #openmoko-cdevel #openmoko, last said: 'no :)'. Jan 18 10:59:21 raster: about that commit http://trac.enlightenment.org/e/changeset/45034 shouldn't the keyboad only popup if the widget is one you can write sth in? Jan 18 11:01:18 badcloud, it took several hours for me to understand how they work :D Jan 18 11:01:26 and still I don't have a fully understanding Jan 18 11:04:11 crudcrap Jan 18 11:04:18 ~seen onen|openBmap Jan 18 11:04:19 onen|openbmap was last seen on IRC in channel #openmoko-cdevel, 4d 15h 31m 14s ago, saying: 'misc: your link works for me too. firefox...'. Jan 18 11:04:35 thanks though Jan 18 11:27:13 badcloud: IIRC I send you OE docs link already.. Jan 18 11:27:38 badcloud: it's best doc I've read to get know-how.. maybe not shortest.. but still the best Jan 18 11:41:55 [2010-01-18 12:34:03] [Notice] -christel- [Global Notice] Hi all, we're noticing that a lot of clients are flooding off due to autoresponding to repeated version requests, you may wish to set your client NOT to send replies as these replies are not rate limited. As an example; '/set -clear ctcp_version_response or /ignore *!*@* CTCPS' should work in Irssi. For any assistance please visit us in #freenode. Thanks [2010-01-18 12:36:32] [ Jan 18 11:41:57 Notice] -christel- [Global Notice] Duh! Apologies, that should be /set -clear ctcp_reply or /ignore *!*@* CTCPS for Irssi. -- These notices will continue during the attacks, as they are our only way of communicating with the user base, we understand its annoying to some and if you are bothered by them, feel free to '/ignore *!*@freenode/staff/* notice' Jan 18 11:46:48 does anyone know where I can get the patches needed to compile glibc for armv4tl? Jan 18 11:50:33 Rakhun: do you need more patches then armv4t has? Jan 18 11:52:10 I have no idea, what/who is armv4t? Jan 18 11:52:21 Rakhun: as I expect just march=armv4t, then check http://git.openembedded.org/cgit.cgi/openembedded/tree/recipes/glibc Jan 18 11:52:45 ok, thank you Jan 18 11:58:30 thanks Jan 18 11:59:52 i have some external "usb batteries". any idea what's the easiest way to put them to the recommended storage capacity of 40-50%? i use these quite rarely and would like to keep them in the fridge most of the time Jan 18 12:00:34 charge for one hour Jan 18 12:00:49 and hope that's roundabout ok Jan 18 12:01:22 i'm thinking about charging them fully and then discharging them using openmoko so that it can stop the discharge at the right time :) Jan 18 12:01:28 lindi-: please have an eye on spam, and shoot a /mode +R in case. Will you? Jan 18 12:01:44 CTCP spam that is Jan 18 12:01:44 DocScrutinizer: i probably don't have much time for that :( Jan 18 12:02:06 everybody has few time for that. just in case you notice Jan 18 12:02:16 sure Jan 18 12:02:24 DocScrutinizer: hm, if one used /ignore on CTCP spam, he wouldn't see it. Jan 18 12:02:38 ouch right Jan 18 12:03:08 lemme think about THAT nasty catch now a little Jan 18 12:03:22 DocScrutinizer: and somehow my irssi doesn't have ctcp_reply option Jan 18 12:05:08 hi all Jan 18 12:05:15 s/all/everybody/ Jan 18 12:05:15 daniele_athome meant: hi everybody Jan 18 12:06:10 PaulFertser: xchat has a nice option to fire aribtrary msgs on match of any regex Jan 18 12:06:11 sorry just a test :D Jan 18 12:06:32 PaulFertser: alas no xchat on any reliable box here Jan 18 12:06:59 DocScrutinizer: irssi can do the same, but one needs to match them on particular channel. Jan 18 12:07:58 shit. chanserv should learn to cpe with that Jan 18 12:08:05 cope even Jan 18 12:08:50 DocScrutinizer: freenode should just learn to ignore "POST" requests. And they probably will with their new daemon they'll migrate to soon. Jan 18 12:09:08 POST? Jan 18 12:09:20 http post Jan 18 12:09:23 aah that nonsense Jan 18 12:09:53 the spam is caused by javascript sending HTTP POST + body of a real irc connexion to the irc port Jan 18 12:10:38 so ircd do nothing after seeing POST, and then process the irc part ( nick, user, join, privmsg -> spam ) Jan 18 12:12:19 PaulFertser: [2010-01-18 13:03:19] btw, my irssi has neither /set -clear ctcp_reply nor /set -clear ctcp_version_response. But it does have /set -clear ctcp_version_reply :) Jan 18 12:13:26 DocScrutinizer: i guess that only clears the version but probably will send ctcp reply anyway. Jan 18 12:14:14 well in konversation I've set a matchall ignore for CTCP only Jan 18 12:14:35 VERSION Jan 18 12:14:50 DocScrutinizer: it's me testing /trigger Jan 18 12:15:19 aah Jan 18 12:15:41 ignore works great on kontact :-) Jan 18 12:18:38 VERSION Jan 18 12:34:23 PaulFertser: you need to change your nick to HGFHZHFRTG otherwise it won't look authentic Jan 18 12:34:26 VERSION Jan 18 12:35:14 VERSION Jan 18 12:35:27 * Weiss did a couple of pattern-based ignores, and hasn't had any spam problems since saturday :) Jan 18 12:35:46 DocScrutinizer51: saw that? Jan 18 12:35:54 DocScrutinizer51: not exactly what i wanted but near :) Jan 18 12:37:31 you EVIL HAXOR Jan 18 12:38:04 /trigger add -pubctcps -debug -command '/mode $C +R' Jan 18 12:38:11 With trigger.pl /loaded Jan 18 12:38:51 Channel match didn't work for unknown reason but no much harm in trying to change channel i'm not op in. Jan 18 12:39:09 sure Jan 18 12:39:22 what's that other crap you did? Jan 18 12:39:33 133615 * PaulFertser removes user limit Jan 18 12:39:42 133624 * PaulFertser sets mode -c #openmoko-cdevel Jan 18 12:39:49 * JaMa|Off haven't seen any spam at all :) Jan 18 12:40:53 DocScrutinizer51: ah, color filter. It was wrong ordering of arguments, channel name should have come first but was intepreted as parameters. Jan 18 12:41:08 PaulFertser: consider a '; timer 60; /mode $C -R' Jan 18 12:41:22 DocScrutinizer51: trigger matched JaMa|Off's message as pubctcp :( Jan 18 12:42:04 needs some more love Jan 18 12:42:18 Yeah.. I need lots of love :) Jan 18 12:46:43 DocScrutinizer51: sleep/timer doesn't work Jan 18 12:47:25 shit. works great in xchat scripts Jan 18 12:47:44 DocScrutinizer51: in scripts, but trigger.pl works another way Jan 18 12:48:17 DocScrutinizer51: well, it's better than nothing, now when anyone sends VERSION ctcp, the channel mode'll be switched. Manual intervention required, but not a big deal. Jan 18 12:48:52 better than nuttin Jan 18 12:56:04 /trigger add -pubctcps -debug -regexp '^VERSION' -command '/mode $C +R; /wait 60; /mode $C -R' Jan 18 12:57:02 PaulFertser: sounds good yeah Jan 18 12:58:13 now press the red button, for test ;-D Jan 18 13:08:18 VERSION Jan 18 13:19:14 I commented the keyboard toogle from elm_button.c Jan 18 13:19:26 temporarly of course, until a fix will come Jan 18 13:33:31 time to start some RL activity Jan 18 13:36:18 DocScrutinizer, RL = ? Jan 18 13:36:29 where the pizzaman comes from! Jan 18 13:37:22 *wtf RL Jan 18 13:37:31 ~wtf RL Jan 18 13:37:32 RL: real life Jan 18 13:37:44 oh... Jan 18 15:20:33 mmm phone is working now but not with fso-abyss Jan 18 15:20:40 and wifi still not work Jan 18 15:21:00 It's not a problem for me that shr-unstable sometimes break Jan 18 15:21:10 but what is a problem is that it's not fixed rapidely Jan 18 15:22:07 or maybe it's fixed for everybody else and not me because I did somehing wrong? Jan 18 15:22:10 GNUtoo, not with fso-abyss? what do you use for gsm channels muxing? Jan 18 15:22:18 I did opkg update && opkg upgrade today Jan 18 15:22:29 daniele_athome, the older one Jan 18 15:23:08 GNUtoo, you mean gsm0710muxd or something like that Jan 18 15:23:08 ? Jan 18 15:23:17 yes Jan 18 15:23:23 anyway, there is a fix if I remember correctly Jan 18 15:23:34 it didn't segfault for me Jan 18 15:23:35 look in december 2009/january 2010 shr-user ML Jan 18 15:23:38 ok Jan 18 15:23:46 sorry don't have time now to search ;) Jan 18 15:23:47 ah there is a manual fix Jan 18 15:23:49 np Jan 18 15:23:55 I'm suscribed to that ml Jan 18 15:23:57 yes there is Jan 18 15:26:27 ok thanks a lot...sorry to have missed it Jan 18 15:27:23 :) Jan 18 15:41:54 last was "# [Shr-User] Modem unable to register after latest updates Al Johnson " Jan 18 15:41:58 and still no fix? Jan 18 15:43:16 GNUtoo: did you remove fsogsmd? Jan 18 15:43:25 I do not have it Jan 18 15:43:55 opkg list_installed | grep fsogsmd returns nothing Jan 18 15:44:09 and $ fsogsmd => -sh: fsogsmd: not found Jan 18 15:45:42 and update-alternatives? Jan 18 15:47:51 I have it Jan 18 15:47:53 update-alternatives: at least one of --install or --remove must appear Jan 18 15:48:08 but what package? Jan 18 15:48:24 ? Jan 18 15:48:30 I'll look Jan 18 15:48:41 update-alternatives-cworth is bad Jan 18 15:48:55 update-alternatives-cworth - 0.99.154-r4.0.4 Jan 18 15:48:58 ok Jan 18 15:49:11 I saw something on the oe ml Jan 18 15:49:18 but I forgot the details Jan 18 15:49:34 that uses the wrong directory Jan 18 15:49:49 ok Jan 18 15:49:52 and now your alternatives are probably wrong Jan 18 15:50:06 I'll try to find the mail for upgrading Jan 18 15:51:15 [Shr-Devel] HeadsUp! Read this before opkg upgrade Jan 18 15:52:33 ok I'm doing that: opkg install -force-reinstall busybox Jan 18 15:54:01 ah I should have removed cwoth before Jan 18 15:54:05 anyway I'll fix it Jan 18 15:54:07 thanks a lot Jan 18 15:54:50 :) Jan 18 16:45:14 is there already a fix to bug #873 Jan 18 16:46:32 bumbl: where? Jan 18 16:47:46 bumbl: ups misread your question ;) Jan 18 16:48:44 bumbl: the cause it this commit http://trac.enlightenment.org/e/changeset/45034 and was introduced by raster Jan 18 16:50:20 Heinervdm, what should I do after that :opkg remove update-alternatives-cworth && opkg reinstall busybox because I've still 2010.01.18 17:46:52.640 ogsmd.modems.ti_calypso INFO Requesting new channel from 'fso-abyss' Jan 18 16:50:58 GNUtoo: if that would be missing, it would be bad Jan 18 16:51:19 ? Jan 18 16:51:20 GNUtoo: the problem was, that fsogsmd and ogsmd were installed Jan 18 16:51:28 ok Jan 18 16:51:33 but fsogsmd is missing Jan 18 16:52:00 it's still not working? Jan 18 16:52:16 no Jan 18 16:52:28 definitely still not working with fso-abyss Jan 18 16:52:40 i read on the ML that the current update of framwork-config-shr solves the problem Jan 18 16:54:22 ok Jan 18 16:55:47 <\marco> hi to all Jan 18 16:56:13 <\marco> anyone know where I can find python-elementary API documentation? Jan 18 16:56:23 frameworkd-config-shr - 0.9.5.9+gitr1738+76f0b01a6dbd2c517b23792575cea10f3a954999-242+d55005605dc6e86c66b600ddd2b00bf7f313500d-r7.4 is what I have Jan 18 16:56:36 \marco, good question Jan 18 16:56:38 <\marco> or python-efl API doc is enough? Jan 18 16:56:49 <\marco> GNUtoo: :) Jan 18 16:56:58 GNUtoo: but did you let it upgrade your configs when opkg asked you? Jan 18 16:57:10 Heinervdm, it didn't asked me Jan 18 16:57:22 because I had an unmodified config when it upgraded it Jan 18 16:57:40 <\marco> ok.. I suppose there's no doc :D Jan 18 16:58:05 <\marco> but.. python-efl it is automatically generated using epydoc.. why not python-elementary? Jan 18 16:58:07 \marco: you have to look at the source Jan 18 16:58:27 <\marco> (* documentation about python-efl ... blabla ) Jan 18 16:58:42 never expect documentation from E projects ;)( Jan 18 16:58:44 I'm reinstalling the config Jan 18 16:58:47 <\marco> Heinervdm: :D Jan 18 16:59:05 <\marco> Heinervdm: I'll look at the source :).. thanks however :) Jan 18 16:59:16 btw e doesn't support 2 screen yet...I would have to add it Jan 18 16:59:23 if I've the time to do that Jan 18 16:59:23 Heinervdm: so we need rater to fix it? Jan 18 16:59:45 bumbl: that would be the easiest thing, i think Jan 18 17:00:10 I rm /etc/frameworkd.conf and reinstall Jan 18 17:00:17 the config Jan 18 17:05:27 strnage...2010.01.18 18:03:37.354 ogsmd INFO : responding OK Jan 18 17:05:52 GNUtoo: have you looked at phonefsod log? Jan 18 17:06:06 perhaps restarting it helps Jan 18 17:06:30 I've already restarted the phone Jan 18 17:07:17 btw I suspect a bad CPU,the splash screen say pi is 4,that may be the root of all problems(joke obviously) Jan 18 17:07:35 I'll increase logging Jan 18 17:07:39 perhaps it's a timing problem Jan 18 17:08:08 yes I've a non-debug kernel...I wanted to try it and I didn't revert yet Jan 18 17:08:40 that may change timings Jan 18 17:10:01 ATE0 => no response Jan 18 17:10:05 that's what I have in the logs Jan 18 17:10:10 I'll check which port is open Jan 18 17:11:01 http://pastebin.com/m194ad3be Jan 18 17:13:13 JaMa|Off: ping Jan 18 17:13:24 JaMa|Off: is it safe to add your server to opkg to get new e? Jan 18 17:13:58 mmm I've strange things Jan 18 17:14:00 wesnoth: error while loading shared libraries: libbz2.so.1.0: cannot open shared object file: No such file or directory Jan 18 17:14:16 and libbz2-1 was installed Jan 18 17:15:03 reinstalling libbz2-1 fix wesnoth Jan 18 17:42:56 Can someone say me the easiest way for cross compiling a program for SHR? Jan 18 17:45:09 zeusone, using shr bitbake system Jan 18 17:45:48 can you give me a link where I can understand the system? Jan 18 17:46:25 because in the openmoko website I only saw the description of the bitbake recipe Jan 18 17:46:45 but not how to use it Jan 18 17:48:15 http://shr-project.org/trac/wiki/Howto%20get%20my%20application%20in%20the%20SHR%20feed Jan 18 17:51:10 Heinervdm: thanks, I will try Jan 18 17:55:10 lars_: hi, am trying 2.6.32 and so far i found only one problem - i cant make wifi working. Is there anything special to be done to make it working, pls? Jan 18 18:15:31 Heinervdm, so how can I debug it? Jan 18 18:16:36 GNUtoo: does the log say sth? Jan 18 18:30:39 Heinervdm, I'll look Jan 18 18:33:06 Heinervdm, http://pastebin.com/m327881c6 Jan 18 18:35:12 GNUtoo: /var/log/phonefsod.log and /var/log/phoneuid.log too please Jan 18 18:35:27 ok thanks Jan 18 18:36:34 http://pastebin.com/d183db983 Jan 18 18:36:59 http://pastebin.com/d6f9eb585 Jan 18 18:37:00 that's the problem... Jan 18 18:37:20 phonefsod doesn't start correctly Jan 18 18:37:26 sth isn't ready Jan 18 18:37:48 restrting phonefsod should help Jan 18 18:38:24 ok Jan 18 18:38:25 thanks Jan 18 18:38:58 am i the only one with sound problem ? ( vagalume do not play anything, mplayer neither, on shr-u ) Jan 18 18:39:01 mrmoku: do you know what can be the cause of that ^ problem? Jan 18 18:40:07 misc: i'm having no problems with vagalume Jan 18 18:40:38 mmm...2010.01.18 19:38:45.466 ogsmd.modems.ti_calypso DEBUG got 'ATE0\r\r\nOK\r\n' Jan 18 18:40:51 I'll pastebin the end of log Jan 18 18:41:27 Heinervdm: well, that seem to be a alsa problem, i will reboot to see if this help Jan 18 18:42:11 here's the diff : http://pastebin.com/d2a3725bb Jan 18 18:42:16 (what was added) Jan 18 18:43:24 since http://projects.openmoko.org/ ..where else can i get the neon package for SHR Jan 18 18:43:36 http://projects.openmoko.org/ is down Jan 18 18:43:40 on the ml ? Jan 18 18:43:59 UberNeo: with opkg install om-neon? Jan 18 18:44:36 Heinervdm, thanx that worked Jan 18 18:44:36 neon is in the shr feed since half a year or so Jan 18 18:44:56 Heinervdm: hmm Jan 18 18:46:09 misc: what kernel are you using? Jan 18 18:46:23 mrmoku: i meant GNUtoo's problem Jan 18 18:46:26 :) Jan 18 18:46:28 ahh :) Jan 18 18:46:53 phonefsod seems to have problem Jan 18 18:47:02 it looks like a timeing problem Jan 18 18:47:40 hi again! Jan 18 18:47:45 any clue on elementary button-keyboard issue? Jan 18 18:48:33 GNUtoo: without DEBUG phonefsod log is not of much use... are you using fso-abyss? Jan 18 18:48:41 daniele_athome: no, no response from raster Jan 18 18:48:48 mrmoku: latest of shr-u, but i have some trouble to connect to get more information Jan 18 18:49:06 if you want I have a recompiled version with keyboard toggle function call commented Jan 18 18:49:11 as a temporary fix... Jan 18 18:49:25 (I am the temporary fix man :D lol) Jan 18 18:53:59 for A7 does ti_calypso_dsp_mode = aec+nr is required or shall i use ti_calypso_dsp_mode = none Jan 18 18:56:55 UberNeo: is it required for A5? Jan 18 18:57:34 i think so .if it is not buzz fixed Jan 18 19:02:39 ~test Jan 18 19:02:40 Failed! Jan 18 19:02:40 freesmartphone.org: 03morphis 07msmcomm * r68f73b8a3150 10/libmsmcomm/ (6 files in 2 dirs): libmsmcomm: some more initial work Jan 18 19:02:50 mickeyl, test for what? :D Jan 18 19:02:53 (hi mickeyl ;) Jan 18 19:03:27 looks like my new adsl2+ modem works Jan 18 19:03:38 my old one broke on saturday Jan 18 19:03:41 oh :) Jan 18 19:04:00 mrmoku: you mean my feeds? Jan 18 19:04:23 mrmoku: well there is also 2.6.32 in feeds (will remove your std kernel modules) etc Jan 18 19:04:53 mrmoku: and because of SRCPV the feeds are not mergeable at all (correctly) Jan 18 19:05:26 ~praise netgear Jan 18 19:05:27 All hail netgear! Jan 18 19:07:11 mrmoku: and there is partially upgraded svnr45286-r10 Jan 18 19:07:36 mrmoku: but all python based -e failed to build Jan 18 19:07:47 JaMa|Off: hehe too late :P Jan 18 19:07:58 already added and upgraded from your feed Jan 18 19:08:43 mrmoku: you're doomed now :) Jan 18 19:09:01 mrmoku: I guess no git recipe was upgraded.. Jan 18 19:09:17 mrmoku: but I had GIT_CLONE enabled for some time with bitbake-1.10 :) Jan 18 19:09:35 I got e and a kernel I think Jan 18 19:09:43 though not .32 Jan 18 19:09:56 no? strange .32.3 should be there and newest Jan 18 19:10:24 ohh yes Jan 18 19:10:28 root@om-gta02 ~/.e/e/config $ opkg list_installed kernel Jan 18 19:10:28 kernel - 2.6.32.3-oe1+gitr169176+5827b20d022fb47ce9c9731d0fb894d361e16ffe-r4.4 Jan 18 19:10:31 hmm Jan 18 19:10:33 ERROR: '/home/projects/OE/dev/recipes/python/python-evas_svn.bb' failed Jan 18 19:10:34 ERROR: '/home/projects/OE/dev/recipes/python/python-elementary_svn.bb' failed Jan 18 19:10:36 root@om-gta02 ~/.e/e/config $ cat /proc/version Jan 18 19:10:36 Linux version 2.6.29-rc3 (shr@opmbuild) (gcc version 4.4.2 (GCC) ) #1 PREEMPT Sat Jan 9 21:09:08 CET 2010 Jan 18 19:10:37 ERROR: '/home/projects/OE/dev/recipes/python/python-edbus_svn.bb' failed Jan 18 19:10:39 straange Jan 18 19:11:32 U BINDINGS/python/python-evas/include/evas/c_evas.pxd Jan 18 19:11:32 U BINDINGS/python/python-evas/evas/evas.c_evas_object_callbacks.pxi Jan 18 19:13:00 Match Evas callbacks, still pending implement the multi-touch ones Jan 18 19:13:44 JaMa|Off: sounds like a candidate to fix python-evas? Jan 18 19:14:07 I have only one commit to python-evas.. mmt Jan 18 19:14:22 r45286 Jan 18 19:14:25 and I haven't checked the error yet.. you can check it on tinderbox.. Jan 18 19:14:50 I'm at gf house.. so I won't be late near computer :) Jan 18 19:15:39 and angstrom si building here from scratch (testing newer xserver/xorg-macros/libx11).. so even cpu power is not that big :) Jan 18 19:15:44 JaMa|Off: You need Cython -- http://cython.org/ Jan 18 19:16:10 do we have cython-native? Jan 18 19:16:49 recipes/python/python-cython-native_0.10.3.bb Jan 18 19:17:03 and I need also some at least bit better graphics card then S3 ProSavageDDR :) Jan 18 19:17:41 even putty looks bad on brand new LCD connected to this s*i*y card.. Jan 18 19:17:51 heh Jan 18 19:17:58 JaMa|Off: python-elementary is the same error Jan 18 19:18:03 python-edbus is different Jan 18 19:18:17 ImportError: /usr/lib64/python2.6/lib-dynload/operator.so: undefined symbol: _PyUnicodeUCS4_AsDefaultEncodedString Jan 18 19:18:44 ok building cython now Jan 18 19:18:57 JaMa|Off: btw. with the new e from your host I have the top bar always on top Jan 18 19:19:02 even when our idle screen is active :| Jan 18 19:19:04 hmm cython-native was already build Jan 18 19:19:29 mrmoku: illume1, right? Jan 18 19:19:33 no illume2 Jan 18 19:19:44 that tiny top bar? Jan 18 19:19:47 yep Jan 18 19:19:58 that should be always on top, no? Jan 18 19:20:11 or like on top, covering app bellow? Jan 18 19:20:16 not when the idle screen is active... as then the important top part is missing ;) Jan 18 19:21:10 hmm built both cython-native and cython and still the same message from python-eas Jan 18 19:21:13 evas Jan 18 19:22:16 /usr/lib64/python2.6/lib-dynload/operator.so: Jan 18 19:22:24 JaMa|Off: why is it looking at /usr/lib64 ? Jan 18 19:29:40 ~seen ptitjes Jan 18 19:29:45 ptitjes was last seen on IRC in channel #openmoko-cdevel, 26d 21h 19m 20s ago, saying: 'or advocating that'. Jan 18 19:33:26 http://scap.linuxtogo.org/files/cf45ae4ee48f88d6f74504253f905843.png Jan 18 19:33:31 mrmoku, this is illume2? Jan 18 19:34:38 TAsn: yup Jan 18 19:34:47 looks slick Jan 18 19:35:19 freesmartphone.org: 03mickey 07cornucopia * r27d802bd6a42 10/fsodeviced/src/plugins/ (4 files in 4 dirs): fsodeviced: fix WANT_FSO_RESOURCE in Makefiles Jan 18 19:39:50 TAsn: already playing with it :-) Jan 18 19:40:04 mrmoku, yeah, read the backlog :P Jan 18 19:40:20 looks like you are having fun. Jan 18 19:41:02 even without surfing :P Jan 18 19:41:14 haha :P Jan 18 19:41:23 I have a problem :\ Jan 18 19:41:42 I have to double the dose Jan 18 19:41:56 overdose of surfing? ;) Jan 18 19:42:05 My body got used to the adrenaline, and I need more :P Jan 18 19:42:12 mrmoku, underdose Jan 18 19:42:19 I need more to satisfy myself Jan 18 19:42:27 :) Jan 18 19:43:43 mrmoku, yes I'll put debug on Jan 18 19:48:45 mrmoku, restarting phonefsod worked this time Jan 18 19:49:40 I'll restart the phone,with loggin on it should tell what is the problem Jan 18 19:49:54 good Jan 18 19:50:23 and wifi is not working but I bet there is an easy workarround with the atheros tool Jan 18 19:50:44 mrmoku, btw I've some changed things on the phone: Jan 18 19:50:50 *wesnoth+boost 1.41 Jan 18 19:51:01 *kernel without debuging build from oe Jan 18 19:51:07 *built Jan 18 19:51:28 the kernel without debuging was for trying it Jan 18 19:51:38 heyho Jan 18 19:51:50 I had issues with wesnoth beeing slower than before and wanted to find out if it was the kenrel's fault Jan 18 19:53:22 morphis: hey :) Jan 18 19:53:23 ouch...it works now Jan 18 19:53:31 should I remove the debug and retry? Jan 18 19:53:38 GNUtoo: hmm... Jan 18 19:53:42 GNUtoo: yes please do that Jan 18 19:53:51 ok Jan 18 19:54:42 JaMa|Off: trying to build 45300 now Jan 18 19:55:55 everything fine here? no further CTCP storms? Jan 18 19:58:00 mrmoku,mmm the DEBUG->INFO made it not work again Jan 18 19:58:25 great :( Jan 18 19:58:27 I did that on both frameworkd.conf and phonefsod.conf Jan 18 19:58:43 great??? that's a big problem...without debug what could we do? Jan 18 19:59:00 GNUtoo: that was an ironic great... see the :( :P Jan 18 19:59:08 ok Jan 18 19:59:22 you don't have the intonation via irc... Jan 18 20:00:08 GNUtoo: probably that is the same thing people have with the non-DEBUG kernels... some nasty timing thing Jan 18 20:00:18 ok Jan 18 20:00:35 mrmoku, I have non-debug kenrel built with oe... Jan 18 20:00:50 I wanted to try for wesnoth Jan 18 20:00:59 to see if it was the cause of the poor speed Jan 18 20:01:01 but I kept it Jan 18 20:01:15 so now I've 2 solutions: Jan 18 20:01:20 *increase debugging Jan 18 20:01:45 *go back to a non-debug kenrel and wait for a semi-debug kernel Jan 18 20:02:57 http://pastebin.com/d53994568 Jan 18 20:03:14 when debug is seet only to phonefsod I have this log and it still doesn't work Jan 18 20:04:01 here's frameworkd.conf: http://pastebin.com/d3280ac26 Jan 18 20:04:06 s/.conf/.log Jan 18 20:05:33 GNUtoo, final slash :P Jan 18 20:06:28 GNUtoo: hmm... what comes afterwards? Jan 18 20:06:59 mmm interresting Jan 18 20:07:07 GNUtoo: I'm missing the callback for requesting GSM... Jan 18 20:07:24 ok I've new infos in the logs Jan 18 20:07:30 I'll paste them 1 sec Jan 18 20:08:26 http://pastebin.com/d66ea0b00 Jan 18 20:09:29 http://pastebin.com/d4e7a4f84 Jan 18 20:10:21 GNUtoo: looks like dbus timeout Jan 18 20:10:40 ok Jan 18 20:11:09 or a problem with fso-abyss... is it started? Jan 18 20:12:34 I'll look Jan 18 20:12:45 no Jan 18 20:12:48 not started Jan 18 20:13:22 ahh, so probably it segfaults Jan 18 20:14:01 JaMa|Off: python-evas as of 45300 build just fine for me Jan 18 20:14:05 s/build/built/ Jan 18 20:14:05 mrmoku meant: JaMa|Off: python-evas as of 45300 built just fine for me Jan 18 20:14:09 so it segfaults only in certain cases? Jan 18 20:14:34 hmm... no idea Jan 18 20:14:40 maybe mickeyl has some ideas :) Jan 18 20:17:27 maybe I should catchsegv fso-abyss? Jan 18 20:33:20 no soundcards found Jan 18 20:33:29 whoops, forgot the first line Jan 18 20:33:40 which is that I'm getting weird kernel errors Jan 18 20:33:47 all sort of module magic errors Jan 18 20:33:56 even after flashing fresh qi, kernel and image Jan 18 20:35:58 does any module loaded? Jan 18 20:37:32 seems like gsm loads Jan 18 20:37:41 but wifi is off Jan 18 20:37:53 usb networking is off Jan 18 20:38:55 module errors are "invalid magic. xyz 2.9.x rc3 should be xyz 2.9.x rc3" Jan 18 20:39:15 (don't have a debug board so I can only try to commit some to memory) Jan 18 20:41:35 so, your modules not from your kernel Jan 18 20:46:19 ? Jan 18 20:46:24 what do you mean? Jan 18 20:46:38 exactly what I said Jan 18 20:46:47 your modules not from your kernel Jan 18 20:47:23 badcloud, even if kernel version is the same, they could have compiled with a different kernel Jan 18 20:47:28 if you change some kernel options you should compile new kernel and new modules and insall them Jan 18 20:47:28 (I mean kernel and modules) Jan 18 20:47:45 haven't changed any kernel options Jan 18 20:47:48 badcloud, read max_posedon ;) Jan 18 20:48:06 your modules *are* not from your kernel? Jan 18 20:48:17 yep Jan 18 20:48:19 max_posedon: is ^ what you meant? Jan 18 20:48:22 (on your neo) Jan 18 20:48:28 ok, so where from? Jan 18 20:48:32 rootfs? Jan 18 20:48:38 I don't know Jan 18 20:48:46 but defenetly not from one config Jan 18 20:48:59 and not from same compiler Jan 18 20:49:40 compiler? I used dfu-util to upload a regular image on the phone Jan 18 20:49:54 badcloud: do you boot from SD or from flash? Jan 18 20:50:00 f Jan 18 20:50:12 badcloud, you know, sometimes your kernel and modules was compiled Jan 18 20:50:22 right Jan 18 20:50:24 they don't come from chaos Jan 18 20:50:36 but the same image worked ~month Jan 18 20:50:55 so, modules and kernel was compiles with different config Jan 18 20:51:05 and you didn't upgrade anything? Jan 18 20:51:11 what would cause the same bootloader, kernel and rootfs to cause all this? Jan 18 20:51:14 nope Jan 18 20:51:20 no 'opkg upgrade' Jan 18 20:51:28 so, just after some reboot all stopped working? Jan 18 20:51:36 yup Jan 18 20:52:02 two options 1. you lie 2. fs corrupted Jan 18 20:52:13 I'll go w/2 Jan 18 20:52:23 I'm no liar Jan 18 20:53:39 I'll try ul-ing again Jan 18 20:53:50 I think I know what it is Jan 18 20:54:10 I used quotation marks in the dfu-util command Jan 18 20:54:22 it didn't upload the fresh image correctly Jan 18 20:55:15 and I got "unknown command at+gcap" on the u-boot display Jan 18 20:55:55 now I get dfu_download error -84 Jan 18 20:57:35 anyone know what that means? Jan 18 20:58:00 hi, will 3d be well suported on future embedded devices? because wesnoth is thinking about switching to opengl Jan 18 20:58:21 GNUtoo: what kind of question is that? ;) Jan 18 20:59:26 lindi-, basically if wesnoth switch to opengl we would loose wesnoth on embedded devices because of the lack of 3d drivers... Jan 18 20:59:35 s/3d/free 3d Jan 18 20:59:55 they think that the powervr driver works well Jan 18 21:03:40 GNUtoo: i'd concentrate on getting phone calls work first ;-) Jan 18 21:04:03 :( Jan 18 21:07:41 How do i configure my FR to be discoverable over bluetooth... Jan 18 21:08:21 /etc/bluethooth/main.cfg has DiscoverableTimer = 0 so it should be discoverable for ever Jan 18 21:08:35 Heinervdm: is "just like your laptop" a valid reply? ;) Jan 18 21:08:55 lindi-: in never tried with my laptop ;) Jan 18 21:08:56 Heinervdm: (sorry, i've spent hours struggling with bluetooth) Jan 18 21:09:10 Heinervdm: my advice is to make it work first on your laptop using external usb dongle Jan 18 21:09:17 Heinervdm: then move the external usb dongle to fr Jan 18 21:09:26 Heinervdm: if that works, then use the internal usb dongle of fr Jan 18 21:09:42 Heinervdm: that 3-step plan will make things lot easier Jan 18 21:10:17 hmm, i think my PC is discoverable out of the box... Jan 18 21:10:56 and the config looks the same.. Jan 18 21:14:21 hi. anyone having a quick fix for http://shr-project.org/trac/ticket/874? Strange, that I'm the only one affected. Jan 18 21:21:38 * Weiss says Hi from his new laptop : Jan 18 21:21:39 :) Jan 18 21:23:17 Weiss: have you run flashrom yet? ;-) Jan 18 21:23:26 hehe Jan 18 21:23:27 or cpuburn? Jan 18 21:23:47 nope, but I defenstrated it straight away (in fact, the shop was kind enough to do that for me, with a screwdriver) Jan 18 21:26:02 If you have a laptop with windows you have to either throw the laptop out of a window or through windows out of the laptop -- rms Jan 18 21:26:15 hehe Jan 18 21:26:26 I got a Thinkpad. It's probably survive.. Jan 18 21:27:58 Weiss: so did the laptop come with windows preinstalled? What about refund? Jan 18 21:28:40 PaulFertser: well.. it came preinstalled, but I paid for an upgrade to the HDD. the upgrade consisted of just sending me the higher-spec HDD though, so Vista is on an HDD in a plastic bag next to me, never used Jan 18 21:28:58 refund of the Microsoft Tax would be good... Jan 18 21:29:59 Weiss: what's the benefit of upgrading through official channel rather than simply buying a new HDD? Jan 18 21:30:20 all I did *was* to buy a new HDD... Jan 18 21:30:30 it just happened, from the same people as I bought the laptop Jan 18 21:30:49 Ah Jan 18 21:30:50 :) Jan 18 21:31:30 I'm sorry to have that crown all the time but it's my irssi that should set +R when/if spam happens again. Jan 18 21:31:54 pattern-based ignores in Irssi are niiice.. Jan 18 21:32:09 switched it on back when this started on Saturday, and haven't had any disturbance since Jan 18 21:32:24 Weiss: you didn't. But think about the others ;) Jan 18 21:32:30 indeed Jan 18 21:45:50 lindi-, flashrom? someone is running coreboot? Jan 18 22:44:25 hehe, cornucopia is a 3d food printer: Jan 18 22:44:41 (german) http://www.golem.de/1001/72456.html Jan 18 22:44:59 mickey sue them... :) Jan 18 22:46:10 too bad i didn't trademark it then ;) Jan 18 22:47:43 heh Jan 18 22:50:19 I'd love to have my phone print food for me. Jan 18 22:55:50 who has deleted http://build.shr-project.org/shr-unstable/ipk//armv4/Packages.gz ? ;) Jan 18 22:56:46 Hakisho, it was empty since long ago Jan 18 22:57:25 http://www.shr-project.org/trac/ticket/454 and http://www.shr-project.org/trac/ticket/276 Jan 18 22:58:12 <\marco> mhm.. I've some problem with mouse events on elementary Jan 18 22:58:26 <\marco> I'm using mouse_move to perform an action Jan 18 22:58:48 <\marco> and mouse_up to start a timer ( in theory when the movement ends ) Jan 18 22:59:23 maybe comment out in the armv4-feed.conf in the images, so a normal user doesn't get distracted. Jan 18 22:59:25 <\marco> but, sometimes, if you move mouse ( or finger ) fast the signal mouse_up wasn't received Jan 18 22:59:33 <\marco> *isn't Jan 18 23:00:30 <\marco> any hint? Jan 18 23:00:34 should I reopen the bugreport? Jan 18 23:00:45 spaetz: (food printer) amazing. but they got it all wrong. the printer should syntesize DNA for bacteria that produce the desired flavours and such, then fast-breed them Jan 18 23:07:12 replicator, make me a hot soup. Jan 18 23:07:30 I bet this was inspired by Startrek too Jan 18 23:07:40 wpwrak: hehe Jan 18 23:08:10 was probably already patented, although this way you can sell more expensive cartridges Jan 18 23:09:18 what a firm can earn with inkjet cartridges is nothing compared to spahetti-bolognese-cartridges. :) Jan 18 23:19:54 UsageController [ERROR] <8 resources>: Resource GSM can't be enabled: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.. Trying to disable instead Jan 18 23:19:54 Ah, maybe thats the reason, why theres no SIM auth dialog.. Jan 18 23:22:06 outch Jan 18 23:22:51 I've to manually restart the phonefsod to get the SIM auth dialog. Jan 18 23:22:58 wpwrak: making people crazy again? Jan 18 23:24:52 DocScrutinizer: always :) Jan 18 23:27:08 wpwrak: you got that brilliant hack that kills freenode atm? has a sick humor but it actually has humor Jan 18 23:27:57 and the website is hosted @ hetzner Nuernberg ;-P Jan 18 23:44:26 I think http://build.shr-project.org/ is offline Jan 18 23:45:33 seemslike Jan 19 00:02:23 http://laserdiy.com/lasercutter.aspx Jan 19 00:03:13 and http://www.youtube.com/watch?v=5erjj6aS5Ws&feature=youtube_gdata :-))) Jan 19 00:03:39 wpwrak: ^^ Jan 19 01:03:04 Hi, i heard TAsn has two phones that ring the same time on the same mobile operator account ... Jan 19 01:03:21 Hey tasn if you could share the info how you did this... Jan 19 01:03:58 I don't know, maybe it is a specific sim from some operator, i have not so much knowledge regarding this... **** ENDING LOGGING AT Tue Jan 19 02:59:57 2010