**** BEGIN LOGGING AT Sat Aug 28 02:59:57 2010 Aug 28 06:21:06 i run into whatever i could yesterday :) now i get md5sum mismatch for locally built package, is there a cure for this? Aug 28 06:22:45 change PR in recipe Aug 28 06:23:23 huh, jam is up :) Aug 28 06:23:28 I guess you're using official feed and want to install own package with same version Aug 28 06:23:30 JaMa :) Aug 28 06:23:35 yes Aug 28 06:23:39 2hours already :/ Aug 28 06:23:43 well, i looked it Aug 28 06:24:51 vanous: and also please read http://www.shr-project.org/trac/wiki/Howto%20get%20my%20application%20in%20the%20SHR%20feed Aug 28 06:25:15 so the bl...dy xserver says PR = "${INC_PR}.3" but package shows 1.9.0-r18.3.5 which is 3.5 Aug 28 06:25:48 18 is INC_PR Aug 28 06:25:52 .3 is from recipe Aug 28 06:25:57 and .5 is DISTRO_PR Aug 28 06:26:14 ok Aug 28 06:26:23 will try now Aug 28 06:26:42 JaMa|GoNe: working? Aug 28 06:26:57 and DISTRO_PR is used to force upgrade of _all_ packages on target as you've seen with switch to .32 or gcc-4.5 Aug 28 06:27:17 not really.. should leave before 9.. but I'm not sure I'll :) Aug 28 06:28:14 i see Aug 28 06:28:37 you have gray sky over there? Aug 28 06:29:29 yup, looks interesting.. like doomsday Aug 28 06:30:00 hmm, so no chance for change here, as it comes from your direction... :/ Aug 28 06:30:19 expecting Lrrr from Omicron Persei 8 conquering fleet now Aug 28 06:30:34 hehe Aug 28 06:32:12 will you send omnewrotate change again? :) Aug 28 06:34:16 yes, but Aug 28 06:34:57 do you mean this part: Fourth Step: Send Recipe To SHR Aug 28 06:35:28 yes Aug 28 06:36:10 if you send your commit, diff will be cleary shown in that patch and it will be easier to apply (with credits to you) and even easier for you when you get used to this workflow with patches Aug 28 06:36:58 yes Aug 28 06:37:09 do i have to have local mtu set up for this? Aug 28 06:37:23 or mta or whatever... sendmail? Aug 28 06:37:25 working sendmail is enought Aug 28 06:37:50 * vanous avoiding local exim on this machine will do this now :) Aug 28 06:38:18 check smaller solutions like msmtp,ssmtp or whatever :) Aug 28 06:38:51 it has to support smarthost Aug 28 06:38:53 will look Aug 28 06:39:13 * vanous appreciates all the help Aug 28 06:39:21 I'm sending with msmtp directly to gmail Aug 28 06:39:47 JaMa|GoNe: how do i know what package i changed with my small patch? as xserver has many packages... rather install all? Aug 28 06:41:19 I guess your change is only in xserver-xorg but I'm not 100% sure Aug 28 06:42:04 good i haven't chosen anything bigger :))))))) Aug 28 06:42:09 hehehe Aug 28 06:46:07 no magic here :( Aug 28 06:46:18 JaMa|GoNe: i was always using sendmail for my e-mail needs :) Aug 28 06:47:59 PaulF: before I was using whole postfix, but msmtp knows everything I need now Aug 28 07:00:21 JaMa|GoNe: you have msmtp system wide or were you able tot tell to git to use different MTA agent? Aug 28 07:02:18 ok, found it Aug 28 07:13:41 JaMa|GoNe: ehm Aug 28 07:13:49 will try it now, hopefully nobody kills me Aug 28 07:18:11 JaMa|GoNe: i have a feeling it will have wrong paths... can you please look? http://pastebin.com/NANW7YDQ Aug 28 07:33:34 vanous: wrong paths? looks ok Aug 28 07:33:53 vanous: but commit message is wrong Aug 28 07:34:04 and there is now Signed-off Aug 28 07:34:07 -by Aug 28 07:34:25 hmm, looking now it seems i created it in openembeded instead of shr-unstable/openembeded Aug 28 07:35:27 i am trying again Aug 28 07:37:39 Signed-off ? Aug 28 07:37:50 something i have to configure in git? Aug 28 07:38:10 git commit --amend -s Aug 28 07:38:46 -s adds SOB line as described in http://wiki.openembedded.net/index.php/Commit_Policy Aug 28 07:40:03 * JaMa|GoNe trying honey as energy source but seems like not working :/ Aug 28 07:40:34 honey + coffee? :) Aug 28 07:40:47 honey + kofola :) Aug 28 07:41:14 git: 'send-email' is not a git command. See 'git --help'. Aug 28 07:41:54 strange what version do you have? Aug 28 07:42:07 git version 1.7.1 Aug 28 07:42:09 JaMa|GoNe: http://en.wikipedia.org/wiki/Energy_bar ? Aug 28 07:42:37 JaMa|GoNe: the latest in my debian unstable... Aug 28 07:42:43 vanous: should be ok Aug 28 07:42:49 i can see it now Aug 28 07:42:53 vanous: maybe you have it as aditional git package Aug 28 07:42:53 has dependencies Aug 28 07:42:56 you Aug 28 07:42:59 yup Aug 28 07:43:35 PaulF: It's not luck of "nutrition" energy here :/ just energy to do something (like motivation) Aug 28 07:43:59 moo Aug 28 07:44:01 PaulF: so energy bar won't probably help Aug 28 07:44:18 JaMa|GoNe: oh, i know what you're talking about. I sometimes try sweetened condensed milk for that. Aug 28 07:44:30 JaMa|GoNe: somewhat works (even for me!) Aug 28 07:44:41 DocScrutinizer51: boo :) Aug 28 07:44:50 PaulF: I'll try 3 weeks holiday, that should work :) Aug 28 07:45:07 JaMa|GoNe: provided they'll be filled by events, yes :D Aug 28 07:45:32 :) Aug 28 07:47:15 PaulF: your chat with ryan was of any help? Aug 28 07:47:34 vanous: arrived but still with wrong commit message, I'll fix it for this time.. but next.. :) Aug 28 07:47:34 JaMa|GoNe: what are your particular plans wrt your USA stay? Do they include cycling? ;) Aug 28 07:47:56 yes, i can see it now :) Aug 28 07:48:28 well, fortunately the oe development is not dependent on people like me :) Aug 28 07:48:29 PaulF: no cycling.. we're planning about 7K km drive.. and we're not staying for more thant 1,5 day in one place.. Aug 28 07:48:48 * vanous loves riding trips Aug 28 07:48:50 DocScrutinizer51: pm'd Aug 28 07:49:56 JaMa|GoNe: take pictures, but stop and consciously take memory imprints of "this is the memories i am making now" Aug 28 07:50:33 JaMa|GoNe: thank you for all the help Aug 28 07:50:40 yw Aug 28 07:50:49 my patch for xserver doesn't work but i will look at it later Aug 28 07:50:52 looking forward for more patches from you :) Aug 28 07:51:17 well, unfortunately the chances i can learn to code are small, tough i would like to help Aug 28 07:51:48 two kids, organic farm and tech job to do... Aug 28 08:57:55 * trs80 sighs Aug 28 08:58:15 I can never seem to get shr to not hang or otherwise suck Aug 28 10:07:48 anarsoul: hi, i am ready for next testing round :) Aug 28 11:07:04 radekp: hi Aug 28 11:07:42 radekp: here's patch to decrease card clock: http://downloads.tuxfamily.org/linuxrx1950/patches/random/s3cmci_decrease_clock.patch Aug 28 11:08:34 radekp: and restore original S3CMCI_MIN_DMA_LEN value (32) Aug 28 11:09:04 anarsoul: oki, i'll finish up something and will try Aug 28 11:15:34 dos1: ping Aug 28 11:15:52 dos1: is 2.6.34 works as phone ? Aug 28 11:15:53 =) Aug 28 11:16:18 alexxy: if you have good alsa scenarios, then it should :P Aug 28 11:16:33 dos1: can you share one? Aug 28 11:17:09 alexxy: i don't have them :P Aug 28 11:17:26 ahh Aug 28 13:01:07 anarsoul: tested with all your 4 patches, but still the same - no wifi Aug 28 15:33:15 hi mickey|zzZZzz Aug 28 15:39:41 TAsn: hello, who may fix this ? http://shr-project.org/trac/ticket/1200 Aug 28 16:28:03 *grumble* Aug 28 16:28:34 shr $veryold running since 1h40min, zhone eating 35% RAM Aug 28 16:29:42 any way to look into this running zhone and see what's using the memory? Aug 28 16:31:15 Wonka, zhone? what phone do you have? Aug 28 16:31:23 GNUtoo|laptop: Freerunner Aug 28 16:31:24 is something else than zhone supported? Aug 28 16:31:29 like zhone2 Aug 28 16:31:30 or SHR Aug 28 16:31:45 as I said, it is a quite old SHR Aug 28 16:31:48 ok Aug 28 16:31:59 ah I thought I was in oe,sorry Aug 28 16:32:03 debian? Aug 28 16:32:04 :) Aug 28 16:32:10 debian still uses zhone Aug 28 16:32:14 but you said you use SHR Aug 28 16:32:20 maybe ask debian people Aug 28 16:32:23 it's "my" "known working" SHR in NAND Aug 28 16:32:28 ok Aug 28 16:32:58 I'd like to replace it with a newer SHR if it was working reliably Aug 28 16:33:11 ok Aug 28 16:33:17 so you need 2 sdcards Aug 28 16:33:21 and to test the newer shr Aug 28 16:33:27 this one just works - got a terminal, got GPRS, got GPS (tangogps and zhone) Aug 28 16:33:37 zhone seem so old Aug 28 16:33:43 maybe shr-testing would be better Aug 28 16:33:48 it's a tested-shr Aug 28 16:33:57 but since no one tested and reported recent version Aug 28 16:33:59 I have cards and do test newer versions, but they're not usable yet Aug 28 16:34:00 it's still very old Aug 28 16:34:06 indeed Aug 28 16:34:10 try shr-testing then Aug 28 16:34:15 i will Aug 28 16:34:28 does zhone2 do everything zhone does? Aug 28 16:34:29 ok Aug 28 16:34:35 I think so Aug 28 16:34:43 zhone doesn't do a lot tough Aug 28 16:34:44 the things I like about zhone are the GPS displays Aug 28 16:34:58 SNR and stuff. also the satellite sky map. Aug 28 16:35:01 try shr-testing with shr's phoneuid Aug 28 16:35:15 what's SNR? Aug 28 16:35:23 Signal to Noise Ratio Aug 28 16:35:30 ah I don't think there is that in zhone2 Aug 28 16:35:57 http://chaos.in-kiel.de/~w/openmoko/zhone-modwonka-left.png Aug 28 16:36:04 http://chaos.in-kiel.de/~w/openmoko/zhone-modwonka.png Aug 28 16:36:34 second one looks slightly different now, I unified ALM und EPH to one column Aug 28 16:37:25 there'S something similar for GSM, showing the GSM cells around Aug 28 16:38:33 and those two parts are what I want to keep Aug 28 16:38:44 they are my reason for keeping zhone around ;) Aug 28 16:40:20 and I don't think zhone should eat 35% RAM... Aug 28 16:40:37 ok Aug 28 16:40:42 neither do I Aug 28 16:40:47 maybe try to debug it Aug 28 16:40:56 wow nice Aug 28 17:00:24 radekp: sad :( Aug 28 17:07:59 radekp: so, fr kernel hackers have another puzzle to solve :) Aug 28 17:09:54 anarsoul: hehe. Aug 28 17:10:17 anarsoul: thank again for 100hz patch btw. using it. Aug 28 17:10:35 gena2x: no pb, are there any benifits? :) Aug 28 17:13:01 my 2% Aug 28 17:13:06 :) Aug 28 17:13:27 like top for free :) Aug 28 17:13:52 (top eats ~2% here) Aug 28 17:14:51 I see Aug 28 17:52:00 TAsn: hello, i fixed the #1200 Makefile problem, i a few minutes (ill test the patch) ill attach the patch to the ticket #1200 can you apply it then to the Makefile and commit the change ? Aug 28 18:05:44 nschle85: I'll apply Aug 28 18:06:10 nschle85: give me your e-mail&realname for --author Aug 28 18:06:11 JaMa|GoNe: i added the patch to the ticket Aug 28 18:06:45 I know I have it.. Aug 28 18:06:47 NormanSchleicher@gmx.de Norman Schleicher Aug 28 18:07:36 SHR: 03NormanSchleicher 07shr-makefile * rc4679e932c3d 10/Makefile: Makefile fix local-builds.inc path in shr-testing Aug 28 18:07:36 pushed Aug 28 18:09:01 JaMa|GoNe: i ll use it now :-) Aug 28 18:13:42 JaMa|GoNe: ahat do i do with the patch files in my tree now? will they get erased or i do it? Aug 28 18:13:52 s/ahat/what/ Aug 28 18:13:53 vanous|around meant: JaMa|GoNe: what do i do with the patch files in my tree now? will they get erased or i do it? Aug 28 18:16:32 vanous|around: they will be gone after make update Aug 28 18:16:55 and one more question please: how do i pull just some parts of the openembedded tree? i.e. i want to put back the recipes and local patches to what is in oe Aug 28 18:17:07 make update will update all... is this the way? Aug 28 18:17:12 vanous|around: to store them you can use git format-patch and after make update; git am 00*; or just use git pull --rebase in openembedded dir instead of make update Aug 28 18:18:00 and ofc you have to keep everything commited locally before git pull Aug 28 18:18:55 this is if i have changes to keep :) but if i just wonna roll back one dir? git pull dir didn't seem to do it, so the --rebase is it? Aug 28 18:19:19 what do you mena by roll back? Aug 28 18:19:43 you can drop every local commit you did with git rebase -i origin/org.openembedded.dev Aug 28 18:20:09 but be carefull with that command.. you can easily lost some commits you did if you don't read carefully what it does Aug 28 18:20:10 i haven't even commited yet Aug 28 18:20:14 JaMa|GoNe: i'd prefer git reset --hard to drop commits Aug 28 18:20:35 but i did some changes Aug 28 18:20:41 PaulF: reset only resets local changes, not commits, afaik Aug 28 18:20:47 and i thought git pull would fix that Aug 28 18:21:06 i see Aug 28 18:21:07 vanous|around: if you want to have some paths exactly as they are in some particular commit, use "git checkout" Aug 28 18:21:24 JaMa|GoNe: if you use --hard, it moves HEAD to the commit you mention. Aug 28 18:21:47 PaulF: ah I usually use it without commit param (to reset to last HEAD) Aug 28 18:21:48 vanous|around: you probably have some misunderstanding about git. Aug 28 18:22:07 vanous|around: git pull is just git fetch + git merge. Aug 28 18:22:10 checkout, that was it, i thought pull would do the same... i better read on more Aug 28 18:22:46 PaulF: yup Aug 28 18:54:53 GNUtoo|laptop: it's pushed to get. I added a working config structure Aug 28 18:55:01 GNUtoo|laptop: thanks again ! Aug 28 18:55:25 GNUtoo|laptop: btw in SHR you run the X session as root ? Aug 28 18:55:55 dcordes, yes but that can be changed Aug 28 18:56:00 on my eee701 Aug 28 18:56:03 I did that: Aug 28 18:56:13 chmod +s /usr/bin/Xorg Aug 28 18:56:19 GNUtoo|laptop: ok in ubuntu I use root login too Aug 28 18:56:19 and I was able to run it as user Aug 28 18:56:22 ok Aug 28 18:56:26 GNUtoo|laptop: but only because I have very weird problem Aug 28 18:56:31 ah ok Aug 28 18:56:33 GNUtoo|laptop: networking only works for root Aug 28 18:56:42 GNUtoo|laptop: I think it's kernel problem Aug 28 18:56:43 ok Aug 28 18:56:50 but still can't find out which Aug 28 18:56:52 mrmoku|away: can you bump omhacks rev to a278146b56b51a8590650702fc08c25aa54a3d32 Aug 28 18:56:53 ppp or rmnet or wifi or usbnet? Aug 28 19:00:15 * radekp just fixed not working volume on his bluetooth headset by washing hands in water ;-) Aug 28 19:01:11 they must use controls like in capacitative screen, with wet hands it works better Aug 28 19:02:22 i was going to start debugging it, then came from bathroom and it worked... Aug 28 19:03:00 GNUtoo|laptop: any net Aug 28 19:03:07 ah Aug 28 19:03:07 GNUtoo|laptop: tried ppp wifi usbethernet Aug 28 19:03:10 I don't know then Aug 28 19:03:22 maybe look at kernel bugs for your version Aug 28 19:03:42 that's a good idea Aug 28 19:03:57 how is screen/key locking realized in SHR ? Aug 28 19:04:10 by fso Aug 28 19:04:24 apm -s go into fake or real suspend mode Aug 28 19:04:35 and fsousaged has an android plugin Aug 28 19:04:44 that looks at devices nodes for resume Aug 28 19:04:58 and look at input nodes Aug 28 19:05:07 I'll read the code Aug 28 19:05:16 ok so basically it is realized on kernel level Aug 28 19:05:21 so you don't lock X or so Aug 28 19:05:29 no Aug 28 19:05:33 userland level Aug 28 19:05:46 and kernel too obviously Aug 28 19:05:54 let me look Aug 28 19:06:50 it gab theses devices nodes: Aug 28 19:06:50 /proc/wakelocks_suspend_resume Aug 28 19:07:01 /proc/wakelocks_resume_reason Aug 28 19:07:11 which needs patching kernel Aug 28 19:07:20 else it works Aug 28 19:07:24 but you miss calls and sms Aug 28 19:07:30 I only have one file: /proc/wakelocks Aug 28 19:07:38 and how do you activate suspend ? Aug 28 19:07:40 then if you press on power key Aug 28 19:07:42 it fully resume Aug 28 19:07:44 apm -s Aug 28 19:07:50 with apm beeing fso-apm Aug 28 19:08:04 and where does fso-apm write then ? Aug 28 19:08:11 a dbus call Aug 28 19:08:19 and what does dbus do ? Aug 28 19:09:23 mdbus2 -s org.freesmartphone.ousaged /org/freesmartphone/Usage org.freesmartphone.Usage.Suspend Aug 28 19:09:38 it calls fsousaged Aug 28 19:09:41 I'll look Aug 28 19:09:46 I think it does that Aug 28 19:09:51 echo mem > /sys/power/state Aug 28 19:09:56 ah thx Aug 28 19:10:03 I'm not sure Aug 28 19:10:08 lindi-, mrmoku|away: omhacks bump done Aug 28 19:10:15 but I know echo mem > /sys/power/state can suspend the phone Aug 28 19:10:39 var sysfs_root = config.stringValue( "cornucopia", "sysfs_root", "/sys" ); Aug 28 19:10:39 sys_power_state = Path.build_filename( sysfs_root, "power", "state" ); Aug 28 19:10:46 that's in the android plugin Aug 28 19:11:08 FsoFramework.FileHandling.write( "on\n", sys_power_state ); //for resuming do echo on > /sys/power/state Aug 28 19:11:30 wen I do 'echo mem > /sys/power/state' on htcleo, the screen will blank (backlight stays ons) Aug 28 19:11:31 FsoFramework.FileHandling.write( "mem\n", sys_power_state ); //for going to standby do echo mem > /sys/power/state Aug 28 19:11:36 ah? Aug 28 19:11:37 and it will stay like that Aug 28 19:11:42 blank means? Aug 28 19:11:46 black Aug 28 19:11:48 ah ok Aug 28 19:11:53 that's what I expected Aug 28 19:11:57 you need a very small patch Aug 28 19:11:58 why Aug 28 19:12:08 because it's an androidianism Aug 28 19:12:13 :9 Aug 28 19:12:18 the patch is one line Aug 28 19:12:29 where is your framebuffer driver source code? Aug 28 19:12:38 man those google whackos should start fixing their userspace instead ! Aug 28 19:13:19 they should do that: Aug 28 19:13:23 push things upstream Aug 28 19:13:30 and adapt userspace to upstream Aug 28 19:13:32 now it's possible Aug 28 19:13:39 there are things that replaces wakelocks Aug 28 19:13:42 like pm_qos Aug 28 19:13:58 http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=blob;f=drivers/video/msm/msm_fb.c;h=c6be38c6e1f3ce83cc85cf741ca5cce3b4e6dbb2;hb=refs/heads/htc-msm-2.6.32 Aug 28 19:15:59 the line is panel->unblank(panel); Aug 28 19:16:05 we have the same driver Aug 28 19:16:48 see the 428 static void msmfb_resume(struct early_suspend *h) function Aug 28 19:16:54 add that line at the end of it Aug 28 19:16:56 before the } Aug 28 19:17:01 hi, I'm getting lots of fetch errors while building shr-unstable: http://pastebin.ca/1927893 Aug 28 19:17:05 GNUtoo|laptop: ok Aug 28 19:17:07 like that: Aug 28 19:17:12 anyone has an idea on what to do? Aug 28 19:18:31 http://pastebin.com/pnB5g8ry Aug 28 19:18:37 and also very important Aug 28 19:18:41 there is a endif Aug 28 19:18:43 so... Aug 28 19:19:13 that corresponds to: Aug 28 19:19:17 #ifdef CONFIG_HAS_EARLYSUSPEND Aug 28 19:19:23 be sure to add that in xconfig Aug 28 19:19:36 (make ARCH=arm xconfig) Aug 28 19:19:42 add earlysuspend support Aug 28 19:19:45 and wakelocks Aug 28 19:19:46 etc... Aug 28 19:20:01 you will have suspend-resume Aug 28 19:20:02 but.... Aug 28 19:20:07 you will miss calls Aug 28 19:20:13 because you won't have the devices nodes Aug 28 19:20:37 maybe we should talk on how far you need to support this device Aug 28 19:20:50 because the rebase are easy Aug 28 19:20:57 1s bbs Aug 28 19:21:43 GNUtoo|laptop: ok I use menuconfig (oldskool) Aug 28 19:22:31 GNUtoo|laptop: http://pastebin.com/h1VNgH16 Aug 28 19:22:38 ok Aug 28 19:22:42 I always use xconfig Aug 28 19:22:44 looks good ? Aug 28 19:22:47 beacuse of help Aug 28 19:22:48 etc... Aug 28 19:22:53 looking Aug 28 19:23:06 yes looking good Aug 28 19:23:11 build Aug 28 19:23:12 I'll check against my config Aug 28 19:23:49 GNUtoo|laptop: by the way. some guys working on touch pro 2 (rhodium) got ALSA working Aug 28 19:23:56 GNUtoo|laptop: potential SHR device :) Aug 28 19:24:08 wow Aug 28 19:24:11 how good is it? Aug 28 19:24:14 GNUtoo|laptop: I suggested jonpry to download latest shr dream build Aug 28 19:24:14 what SOC? Aug 28 19:24:19 ah ok Aug 28 19:24:21 msm7201A ;) Aug 28 19:24:22 this person Aug 28 19:24:24 vga Aug 28 19:24:28 they used our work then Aug 28 19:24:41 that's nice but that also means that they didn't made any improvement yet Aug 28 19:24:42 why are you so sure Aug 28 19:24:57 not sure Aug 28 19:25:00 ah no Aug 28 19:25:07 that's a windows ce work Aug 28 19:25:21 exactly Aug 28 19:25:22 that doesn't work with our kenrel Aug 28 19:25:23 different dsp Aug 28 19:25:26 I must talk to him Aug 28 19:25:32 go ahead :) Aug 28 19:25:32 thanks a lot for the infos Aug 28 19:25:41 1s I finish your power management Aug 28 19:25:43 ok it compiled Aug 28 19:25:51 try it Aug 28 19:25:56 and push Aug 28 19:26:10 btw for the commit message Aug 28 19:26:15 the best is to commit as your name Aug 28 19:26:20 and to tell I helped you Aug 28 19:26:22 with my name Aug 28 19:26:29 and to tell which commit it comes from Aug 28 19:26:39 I think I am holding the world record title of # replaced microsd card from phones :) Aug 28 19:26:40 I think it was mickey|zzZZzz who told me what to do with resume Aug 28 19:26:46 lol Aug 28 19:26:54 I've a lot of microsd too Aug 28 19:26:59 because I've a lot of devices Aug 28 19:27:02 let me check Aug 28 19:27:08 GNUtoo|laptop: you provided the patch so it's all good Aug 28 19:27:16 9 microsd Aug 28 19:27:20 http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=commit;h=b725a03e918bdf61d558b9801b3e7da207117eb7 Aug 28 19:27:36 ok Aug 28 19:27:36 haha yea I remember and you use tipewriter paste to number them Aug 28 19:28:00 yes Aug 28 19:28:07 basically there are 2 parts Aug 28 19:28:16 the typex for the numbers on the cards Aug 28 19:28:29 and a file named sd on the desktop of the computer I use the most Aug 28 19:28:32 http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=commitdiff;h=5e2869d7a8c55cfdec18f09ccae27a6a7fd40d54 Aug 28 19:28:35 this how I added it Aug 28 19:28:43 for instance: Aug 28 19:28:45 1:stock bug image + navit Aug 28 19:28:45 2:angstrom sato x11 image for bug Aug 28 19:28:54 etc... Aug 28 19:29:14 nice Aug 28 19:29:16 booting testing .. Aug 28 19:29:23 btw what's your goal with hd2? Aug 28 19:29:26 for SHR Aug 28 19:29:33 until where do you want to go? Aug 28 19:29:36 fully usable? Aug 28 19:29:49 do you have a roadmap? Aug 28 19:42:47 JaMa|GoNe: thanks Aug 28 19:46:50 GNUtoo|laptop: no nothing yet Aug 28 19:47:01 GNUtoo|laptop: first need alsa before I think about refined userspace things Aug 28 19:47:25 ok but suspend resume is important Aug 28 19:47:30 else the battery life isn't good Aug 28 19:47:34 try basic suspend resume Aug 28 19:47:50