**** BEGIN LOGGING AT Wed Jan 12 02:59:58 2011 Jan 12 06:48:49 playya: you can turn the softkbd completely off... I have the same problem with n900... I would like it to default to the hw keyboard, but have the softkbd still enableable Jan 12 08:48:17 anyone there to help me Jan 12 08:48:19 ? Jan 12 08:49:00 trying hard to use voip on SHR but no success :( Jan 12 09:16:33 EsEhAr: what is exactly the problem? Jan 12 10:25:36 Hi all Jan 12 10:26:09 Hi Jan 12 10:29:09 JaMa: I am bored because yesterday night I launch a pre2 build image befor going to bed ('cause of a poor connection ) and this morning when I cam back it has stop just right after Ii was away... :/ :) Jan 12 10:29:12 http://tinderbox.openembedded.org/public/logs/task/18930361.txt Jan 12 10:29:56 something to do with a typo about perl do you think ? Jan 12 10:31:11 GarthPS: looks like it.. I've noticed few perl related patches on ML but didn't hit this one yet Jan 12 10:33:10 GarthPS: what's returned by "/usr/bin/env perl" ? Jan 12 10:33:19 JaMa: hmm I just did a make update hopping that the personne who did the typo (if it is a typo error) corrected it but no still the same Jan 12 10:34:00 JaMa: does your command take time ? Jan 12 10:34:46 no Jan 12 10:35:08 I have white cursor standing here , ok ctrl+C was hanging Jan 12 10:35:14 ah, yes Jan 12 10:35:28 change it to "env perl -v' Jan 12 10:37:58 only related change I've found is http://git.openembedded.org/cgit.cgi/openembedded/commit/?id=1550b65731472dab6b9cc7e3488a1aa1ab0906e3 but don't see typo there Jan 12 10:38:30 JaMa: http://pastebin.com/uyDGbW9K Jan 12 10:40:46 can you retry after "bitbake -c clean gettext-native" ? Jan 12 10:46:44 JaMa: trying. other info I am building for MACHINE=palmpre2 . perhaps morphis did a typo when creating this machine ? Jan 12 10:49:07 seems not likely as perl is quite far from machine config Jan 12 10:52:52 JaMa: ok . so gettext_0.18.bb' failed now :). I bitbake -c clean gettext and retry and tell you after that Jan 12 11:02:18 JaMa: still the same http://tinderbox.openembedded.org/public/logs/task/18953738.txt Jan 12 11:02:43 I am here http://tinderbox.openembedded.org/builders/GarthPS/ Jan 12 11:11:04 morning!!!! Jan 12 11:11:12 it's nice to be here again :) Jan 12 11:11:40 mornig! Jan 12 11:28:02 GarthPS: seems like you're alone.. http://tinderbox.openembedded.org/packages/gettext-native/ try #oe, maybe someone there seen it.. Jan 12 11:28:23 GarthPS: and try to debug where you got that "per".. ie by grep -R in tmpdir Jan 12 11:28:34 /gettext-native ;) Jan 12 11:29:07 JaMa: hmm I did not understannd your last sentence Jan 12 11:30:17 GarthPS: I don't see "per" typo in OE metadata.. then it's probably autodetected somehow in buildtime.. try to find where and how and why it fails for you Jan 12 11:30:45 * JaMa rebuilding gettext-native too Jan 12 11:30:51 JaMa: I understood this :) Jan 12 11:31:45 hmm http://www.qualcomm.com/news/releases/2011/01/05/qualcomm-acquire-atheros-leader-connectivity-networking-solutions Jan 12 11:31:57 I have to finish a paper for my job research , I will track down this issue after Jan 12 11:32:21 hope seen that... we will see.. Jan 12 11:33:11 how good is qualcomm wrt open source drivers/firmware? :) Jan 12 11:35:06 hi lindi- Jan 12 11:36:51 GarthPS: gettext-native configured fine here Jan 12 11:37:05 JaMa: enven for palmpre2 ? Jan 12 11:37:09 even Jan 12 11:37:13 GarthPS: also check run.do_configure.* script, maybe it's in this file Jan 12 11:37:25 GarthPS: -native are native so exactly the same for all machines Jan 12 11:37:36 JaMa: oh yeah right :) Jan 12 11:37:56 JaMa, I keep having this: gettext-native Jan 12 11:37:58 oops Jan 12 11:38:08 s/gettext-native/http://pastebin.com/55uLD9dP Jan 12 11:38:11 JaMa: already check and there is no ../usr/bin/per occurence Jan 12 11:38:39 I cleaned task-shr-minimal Jan 12 11:38:41 and rebuilt it Jan 12 11:38:44 and no luck Jan 12 11:38:45 strange Jan 12 11:38:57 GNUtoo|laptop: something RDEPENDed by task-shr-minimal needs rebuild Jan 12 11:39:00 I already looked into that task(task-shr-minimal) in the past Jan 12 11:39:05 GNUtoo|laptop: cd tmp/deploy/ipk Jan 12 11:39:09 and no luck either Jan 12 11:39:10 ok Jan 12 11:39:22 find . -name Packages -exec grep -B 6 libnl1 {} \; Jan 12 11:40:10 ahhh iw Jan 12 11:40:12 thanks a lot Jan 12 11:40:12 and I had to purge even libnl1 shlibs to force some packages to link against libnl2 Jan 12 11:40:32 so I'll clean and rebuild iw Jan 12 11:41:09 iw needs to be updated Jan 12 11:41:15 not to depend on libnl Jan 12 11:41:16 I think Jan 12 11:41:39 how should I do that? Jan 12 11:41:52 else can you do it? Jan 12 11:41:56 when you can Jan 12 11:42:10 I don't use iw at all afaik Jan 12 11:42:17 ok Jan 12 11:42:21 I'll -b clean it Jan 12 11:42:22 then Jan 12 11:42:30 but how to fix? Jan 12 11:42:35 other distro may use libnl1 Jan 12 11:42:44 and have it blacklisted locally Jan 12 11:42:46 and they need the depend Jan 12 11:43:29 if there is newer version you can add it with D_P -1 and add D_P_shr 1 Jan 12 11:43:47 it's not about newer version Jan 12 11:43:52 iw works fine with libnl2 only Jan 12 11:44:08 it doesn't need libnl1 to work Jan 12 11:44:23 I mean to resolve "other distro may use libnl1" Jan 12 11:44:41 ??? Jan 12 11:44:49 what DP has to do with deps? Jan 12 11:45:02 but I can put deps to libnl2 for shr Jan 12 11:45:19 and keep the previous deps for other distros Jan 12 11:45:21 if you add 0.9.21 with libnl2 depend and D_P -1 and D_P_shr 1 then nobody will blame you :) Jan 12 11:45:47 ah you want me to add 0.9.21 Jan 12 11:45:53 and add comment about libnl2 above D_P Jan 12 11:45:59 I was thinking of fixing the existing one Jan 12 11:50:08 heyho Jan 12 11:51:08 GNUtoo|laptop: guess what... I'm stupid :P Jan 12 11:51:18 ah? Jan 12 11:51:19 GNUtoo|laptop: on my laptop I use Fn-F1 to suspend Jan 12 11:51:28 and Fn-F2 turns charging off Jan 12 11:51:34 lol Jan 12 11:51:51 the best thing is... that happened to me before and I forgot :P Jan 12 11:51:59 you are not stupid, the people who make the laptop are Jan 12 11:52:18 why do they create a button that stop charging Jan 12 11:52:21 dunno... maybe there is a uscase for that Jan 12 11:52:25 that's insane Jan 12 11:52:28 anyway... my memory sucks Jan 12 11:52:34 for some things at least Jan 12 11:52:34 mine too Jan 12 12:09:13 JaMa, do you have an idea for that: http://pastebin.com/8WsiDTMs Jan 12 12:09:24 trying to get a new linphone Jan 12 12:09:58 normally aclocal is recreated automatically during do_configure no? Jan 12 12:10:08 because autoreconf is run Jan 12 12:10:13 or something like that Jan 12 12:10:56 GNUtoo|laptop: yes but sometimes you need to remove .m4 files from source dir Jan 12 12:11:04 ah ok Jan 12 12:11:05 GNUtoo|laptop: to force it use OE version Jan 12 12:11:07 no force etc... Jan 12 12:11:08 ok Jan 12 12:11:22 and linphone used old staging Jan 12 12:11:24 I must fix that Jan 12 12:22:04 radekp: hi, what exactly is this about? https://github.com/radekp/linux-2.6/commit/84af470fc07070fd5a129bfdcbd7c25978f8e778 Jan 12 12:22:12 radekp: tslib + xf86-input-tslib? Jan 12 12:25:36 JaMa: hi, it's for tslib Jan 12 12:26:18 so only tslib package needs to be rebuilt? Jan 12 12:26:24 JaMa: tslib checks version and if it's newer it refuses to work, if you have very recent tslib it should not be needed Jan 12 12:27:00 JaMa: maybe also other packages, i had problems with input-utils, but havent checked if that commit fixed it Jan 12 12:27:26 ok thanks.. all I know is that xf86-input-tslib didn't work after booting .37 Jan 12 12:27:54 so maybe it the reason and tslib was rebuilt to latest version yesterday.. but cannot test .37 now to confirm it's enough Jan 12 12:34:42 bbl Jan 12 13:07:45 JaMa: want me to test? Jan 12 13:08:16 mrmoku: w8 a bit for newer efl/mesa/etc Jan 12 13:08:26 NOTE: Running task 6434 of 11119 Jan 12 13:08:31 ok :) Jan 12 13:11:06 mrmoku: or if you really want, you can start now with s/tslib/evdev/g /etc/X11/xorg.conf Jan 12 13:26:51 JaMa: ok, will do that Jan 12 13:32:14 mrmoku: index is ready for you :) Jan 12 13:32:23 mrmoku: but see #oe Jan 12 13:33:06 ericben said he had to rebuild agains newer linux-libc-headers, which is easy, but it's not sure if resulting tslib will still work ie with 2.6.34 Jan 12 13:40:24 mrmoku, we should add a wiki page to "standardize" some of the keys/switches in fsodeviced Jan 12 13:40:50 playya: that would be a good thing, yes Jan 12 13:40:56 i already wrote sth about it. but can't remember where Jan 12 13:41:24 JaMa: so, I update too? Or just try s/tslib/evdev/ first? Jan 12 13:41:26 ah: http://wiki.freesmartphone.org/index.php/Brainstorm/fsodeviced#Input Jan 12 13:42:12 playya: hehe, there's missing the keyboard slide though Jan 12 13:42:39 and the camera slide Jan 12 13:43:07 yes Jan 12 13:43:29 iirc i never had a mobile with a camera slide :) Jan 12 13:43:59 dunno how you call it when you open the lense of the camera... Jan 12 13:44:22 but if you take a look at the media keys, i had a nokia n95 as an example Jan 12 13:45:11 :) Jan 12 13:45:15 mrmoku: you can upgrade, then it won't probably work (but ssh should), so then s/tslib/evdev/ and then tslib from my repo Jan 12 13:45:43 JaMa: without upgrade just doing the s/tslib/evdev/ makes it work Jan 12 13:45:43 mrmoku: this should help http://gitorious.org/~jama/angstrom/jama-shr-experimental/commit/0cd35ab344729cf9143f98798216d4ca282afe41 Jan 12 13:46:29 good so in worst case we can switch back to evdev, which will make [Rui] sad a bit Jan 12 13:47:03 :) Jan 12 13:47:05 upgrading now Jan 12 13:48:18 * mickey|office votes for CAMERA_COVER Jan 12 13:48:21 or CAMERA_LID Jan 12 13:49:21 we should also revisit the LED purpose interface Jan 12 13:49:38 i.e. a way to map LED functions to physical leds Jan 12 13:50:15 * mrmoku wants the n900 kbd leds to work like in maemo :) Jan 12 13:50:38 hmmm Jan 12 13:50:42 illume-keyobard crash Jan 12 13:50:58 * mrmoku prefers CAMERA_LID Jan 12 13:51:41 * mrmoku irb Jan 12 13:52:04 mrmoku: http://jama.homelinux.org/org.openembedded.shr/armv4t/libts-1.0-0_1.0+gitr1+860d69cadedef0dec8ba6259ab5850691d3402e7-r28.5.6_armv4t.ipk is tslib with that patch Jan 12 13:57:24 JaMa: have to change back to tslib in xorg.conf? Jan 12 13:57:38 yes to test it Jan 12 13:57:52 root@om-gta02 ~ # opkg install libts-1.0-0_1.0\+gitr1\+860d69cadedef0dec8ba6259ab5850691d3402e7-r28.5.6_armv4t.ipk Jan 12 13:57:55 Collected errors: * deb_extract: libts-1.0-0_1.0+gitr1+860d69cadedef0dec8ba6259ab5850691d3402e7-r28.5.6_armv4t.ipk: invalid magic * pkg_init_from_file: Failed to extract control file from libts-1.0-0_1.0+gitr1+860d69cadedef0dec8ba6259ab5850691d3402e7-r28.5.6_armv4t.ipk. Jan 12 13:57:58 mickey|office, you still have a patch to group LEDs Jan 12 13:58:21 mrmoku: ah sorry wrong domain again :/ Jan 12 13:58:24 playya: yeah, i know. I'll revisit that Jan 12 13:58:37 mrmoku: http://jama.dyndns-home.com/org.openembedded.shr/armv4t/libts-1.0-0_1.0+gitr1+860d69cadedef0dec8ba6259ab5850691d3402e7-r28.5.6_armv4t.ipk Jan 12 14:00:31 note that illume-keyboard segfault and I had to disable it Jan 12 14:01:49 with current efl srcrev in tests/shr-u? Jan 12 14:02:12 or did it start segfaulting for you yesterday? Jan 12 14:02:37 * JaMa tested efl this time only on n900 Jan 12 14:04:28 today Jan 12 14:04:32 I did git pull Jan 12 14:04:35 bitbake shr-image Jan 12 14:04:40 opkg update;opkg upgrade Jan 12 14:04:45 and it segfaulted on htcdream Jan 12 14:18:06 JaMa: e segfaults indeed now :P Jan 12 14:18:29 JaMa: but touchscreen seems to work... I can press Exit ;) Jan 12 14:18:55 ohh Jan 12 14:18:56 phoneuid: error while loading shared libraries: libfsoframework.so.0: cannot open shared object file: No such file or directory Jan 12 14:20:34 #0 0x40b52788 in poll () from /lib/libc.so.6 Jan 12 14:20:34 #1 0x40980e34 in _xcb_conn_wait () from /usr/lib/libxcb.so.1 Jan 12 14:29:23 that backtrace is from e segfault or phoneuild? Jan 12 14:30:02 mrmoku: and it segfaults on gta02 for you, right? Jan 12 14:32:18 JaMa, how do I distclean a source dir? Jan 12 14:32:24 I do that: Jan 12 14:32:40 cd ${S}/oRTP/ Jan 12 14:32:48 oe_runmake distclean Jan 12 14:32:48 autotools_do_configure Jan 12 14:32:49 maybe we should add a FSO_UTILITIES_PALMPRE_SRCREV and FSO_UTILITIES_ANDROID_SRCREV to keep the revisisions synced Jan 12 14:32:55 in do_configure_append Jan 12 14:32:58 and it says: Jan 12 14:33:06 | configure: error: source directory already configured; run "make distclean" there first Jan 12 14:33:11 dunring do_configure Jan 12 14:33:22 basically there are nested configure Jan 12 14:33:28 or something like that Jan 12 14:33:59 sigh Jan 12 14:35:17 does it really support distclean target for make? Jan 12 14:35:23 I'll look Jan 12 14:36:33 ahhh there is an autogen.sh there Jan 12 14:36:36 in oRTP Jan 12 14:37:05 does e segfault with not-shr e profile? Jan 12 14:37:55 n900 here doesn't segfault sofar and gta02 remotely maybe does, because enlightenment_start.oe hangs after ESTART: 1.88376 [0.00404] - load modules Jan 12 14:40:17 JaMa: e segfault, and yes gta02 Jan 12 14:40:50 what segfault? keyboard? Jan 12 14:40:52 * mrmoku does rm -rf .e and tries Jan 12 14:41:25 JaMa: btw. load modules is the last thing for me too Jan 12 14:41:30 I really wonder what to do with newer linphone Jan 12 14:41:35 they have a main dir Jan 12 14:41:42 where there is a ./configure Jan 12 14:41:52 and no Makefiles Jan 12 14:41:59 but there are subdirs Jan 12 14:42:03 like oRTP Jan 12 14:42:05 and mediastreamer Jan 12 14:42:10 which got the same thing Jan 12 14:42:16 and ortp fails with libtool mismatch Jan 12 14:42:20 mrmoku: I guess it's from 56042 or 56045 but don't see the problem in it Jan 12 14:42:25 so I must regeerate configure Jan 12 14:42:57 JaMa: the wizard starts fine... can select the language and the profile... then it segs Jan 12 14:44:44 just offers me the shr profile though... can't select the plain illume2 one Jan 12 14:45:10 mrmoku, I did that: Jan 12 14:45:14 click on restart Jan 12 14:45:17 several times Jan 12 14:45:24 after it load Jan 12 14:45:26 mrmoku: opkg install e-wm-config-illume2 Jan 12 14:45:31 and says the cause of the segfault Jan 12 14:45:41 mrmoku: then it will offer illume2 upstream profile Jan 12 14:45:41 like illume-keyboard in my case Jan 12 14:46:46 btw. anyone in here is interested in running osmocom-bb with fso on the gta-02? Jan 12 14:46:53 JaMa, should I ask in oe? Jan 12 14:47:08 GNUtoo|laptop: about linphone? yes Jan 12 14:47:09 GNUtoo|laptop: I tried to recover more than ten times now... no success Jan 12 14:47:10 for linphone Jan 12 14:47:11 ok Jan 12 14:47:59 JaMa: Illume-Home segfaults too Jan 12 14:48:34 GNUtoo|laptop: this is what I did for similar issue in python.. autoreconf -Wcross --verbose --install --force --exclude=autopoint Modules/_ctypes/libffi || oenote "_ctypes failed to autoreconf" Jan 12 14:48:39 GNUtoo|laptop: in do_configure_prepend Jan 12 14:48:56 ok Jan 12 14:48:57 thanks a lot Jan 12 14:53:22 JaMa, still the same error Jan 12 14:53:35 do_configure_prepend() { Jan 12 14:53:36 autoreconf -Wcross --verbose --install --force --exclude=autopoint oRTP/ Jan 12 14:53:39 I'll check the logs Jan 12 14:55:09 you still has to remove old libtool m4 from oRTP dir Jan 12 14:56:17 ah ok Jan 12 14:56:25 the force is not enough then Jan 12 14:56:57 mrmoku: maybe also install default theme e-wm-theme-illume Jan 12 14:57:08 got installed automatically Jan 12 14:57:14 ahh... theme Jan 12 14:57:55 ohhh was not that Jan 12 14:58:03 e-wm-theme-illume - 0.16.999.060+svnr56055-r18.6 Jan 12 14:58:04 autoreconf -Wcross --verbose --install --force --exclude=autopoint Jan 12 14:58:05 worked Jan 12 14:58:13 but still it hangs on load modules :/ Jan 12 14:58:14 adding that worked Jan 12 14:58:30 http://pastebin.com/hTwZX1r6 Jan 12 14:59:30 mrmoku, could you grant me commit rights for xkeyboard-config? Jan 12 15:00:28 playya, you plan to modify that, note that I used it only as a temporary way to publish my sources, the newer sources are upstream Jan 12 15:00:48 i only need the palmpre branch Jan 12 15:01:22 * JaMa has to finish something at work, then I'll retry to reproduce segfault on n900 (only way for me to fix it as remotly I cannot pass 1st time wizard..0 Jan 12 15:01:47 ok but I wanted to point out that the palm-pre and the htcdream branch are not ready for upstream Jan 12 15:01:51 they're not done correctly Jan 12 15:01:54 but they work Jan 12 15:02:12 the correct way is what I did with the dream and that is upstream Jan 12 15:02:25 i have a fully working palmpre keyboard Jan 12 15:02:32 ok nice Jan 12 15:02:33 at least US Jan 12 15:02:37 so commit Jan 12 15:04:15 i think i have to send my pub key first Jan 12 15:07:18 mrmoku: did you opkg upgrade yesterday? just to confirm that e segfault is caused from http://git.openembedded.org/cgit.cgi/openembedded/commit/?h=org.openembedded.dev&id=e7e75a2d19514b5b29e2572ab7f8de36d64a8ec4 Jan 12 15:07:31 that would be only 31 revisions to check Jan 12 15:11:16 playya: interested? depends on what you mean exactly :-) Jan 12 15:11:47 run a complete open source stack down to the baseband on the freerunner Jan 12 15:12:29 I'm sure pretty much all FR users would like that... Jan 12 15:12:45 i already thought about encryption, but the network seems to reencode the voice stream in some cases Jan 12 15:13:31 there is at least one commercial system that implements strong end-to-end encryption on top of GSM; but I have no idea how that works Jan 12 15:13:50 you mean cryptphone? Jan 12 15:14:39 afaik they are using a data channel. Jan 12 15:15:45 sylvain manaut told me that there's a spec for direct transmission, but it's unknown if the networks support it Jan 12 15:16:31 maybe it works if you're within the same network but not between 2 providers Jan 12 15:16:54 JaMa: hmm... I upgraded before... don't remember if I upgraded yesterday, but I think yes Jan 12 15:17:08 any revision I could check for? Jan 12 15:17:49 mrmoku: I'm building http://trac.enlightenment.org/e/changeset/56050 -1 Jan 12 15:20:38 mrmoku: can you join #edevelop with backtrace? Jan 12 15:22:57 JaMa: yup, though it's not very usefull Jan 12 15:32:21 mrmoku: 55049 seems to work :) can you check visually? http://jama.dyndns-home.com/org.openembedded.shr/armv4t/e-wm_0.16.999.060+svnr56049-r18.6_armv4t.ipk Jan 12 15:34:16 JaMa: yup, moment Jan 12 15:40:26 lindi-, ping Jan 12 15:40:33 I tried again with a more recent version Jan 12 15:40:35 still no go Jan 12 15:40:45 still some rrrr as sound Jan 12 15:40:58 and still no way to configure the sound card access Jan 12 15:41:02 such as 44100 stereo Jan 12 15:41:04 etc... Jan 12 15:42:29 mrmoku: newer e-wm now in OE, rebuilding images again :) Jan 12 15:48:47 JaMa: great :) Jan 12 16:17:04 GNUtoo|laptop: pong Jan 12 16:26:56 lindi-, hi Jan 12 16:27:14 lindi-, do you remember how to do it and if we really talk about the same thing? Jan 12 16:27:52 I can't choose the freq like 44100 48000, the format like S16_LE, mono/stereo etc... Jan 12 16:30:55 mrmoku, btw telephony still doesn't work at boot Jan 12 16:31:01 * GNUtoo|laptop will rebuild Jan 12 16:31:13 GNUtoo|laptop: on gta02 ? Jan 12 16:31:23 mrmoku, on htcdream Jan 12 16:31:33 basically phonefsod issue Jan 12 16:31:35 hmm Jan 12 16:31:35 it's not started Jan 12 16:31:44 and when you start it manually everything goes fine Jan 12 16:31:47 ahh, right... almost forgot about that Jan 12 16:38:41 is there any solution to 2nd rfkill intf from btusb? Jan 12 16:39:16 I mean to apply in OE.. locally I just rmmod btusb :) Jan 12 16:49:46 JaMa|Off: yup, mickeyl finally has fixed that last night Jan 12 16:49:52 needs bumping of fso Jan 12 16:50:02 * mrmoku forgot that too :/ Jan 12 16:54:46 GNUtoo|laptop: how to do what? Jan 12 16:56:04 basically we got a bad sound driver on htcdream Jan 12 16:56:18 i would like to play with sound settings Jan 12 16:56:26 mrmoku: ah great, I'll restart build if you bump it ;) Jan 12 16:56:32 to see how to workwarround it Jan 12 16:57:12 but the only setting i get is the soundcard setting Jan 12 16:57:29 which can select which soundcard to use Jan 12 16:57:33 not more Jan 12 17:00:08 JaMa|Off: bumped Jan 12 17:03:13 mrmoku: thanks Jan 12 17:03:20 yw Jan 12 17:03:26 and thanks for building :) Jan 12 17:04:19 * mrmoku off for dinner Jan 12 17:26:46 guys, is there a less heavy than rm -rf tmp/ to flush shr-u build ? Jan 12 17:31:49 mv it Jan 12 17:31:56 and then rm it Jan 12 17:58:02 GNUtoo|dream|shr: which difference does it make ? Jan 12 18:02:06 Probably that you can start building a new image while rm is still ongoing. Jan 12 18:07:11 what's the easiest way to bring an elementary button into an edje layout via code? Jan 12 18:07:37 can i just put it into a swallow? Jan 12 18:09:34 GarthPS, did you test if the token is set to unlocked? Jan 12 18:10:52 playya_: yop, I have this found new token (key = 'SimLockDef', value = '1075FR-SFR') Jan 12 18:10:53 SimLockDef=1075FR-SFR Jan 12 18:10:53 position 00005388 Jan 12 18:11:44 playya_: I asked on a frnahc furom if a guy having an unlock device could help me to get his value Jan 12 18:13:22 do you have a complete backup of your phone? Jan 12 18:18:08 playya_: hmm what do you mean ? Jan 12 18:18:29 it's possible to create a backup with webosDoctor Jan 12 18:20:36 playya_: how? and why this question ? Jan 12 18:21:02 you can recover everything if sth goes wrong Jan 12 18:23:06 mickeyl: into swallow is what we do, yes Jan 12 18:23:19 ok, now i just have to make it appear... Jan 12 18:23:26 it doesn't want to show :) Jan 12 18:23:28 hehe Jan 12 18:24:28 hmm Jan 12 18:24:41 perhaps i need to set the size Jan 12 18:24:50 although a swallow should resize its child iirc Jan 12 18:24:55 yup Jan 12 18:25:06 you have to evas_object_show it Jan 12 18:25:27 playya_: how do I do that ? Jan 12 18:27:02 GarthPS, http://www.precentral.net/how-to-back-your-palm-profile-information Jan 12 18:28:05 playya_: thx! :) Jan 12 18:31:32 hmm Jan 12 18:31:36 it should be ok: Jan 12 18:31:38 _tmp0_ = elm_button_add ((Evas_Object*) self); Jan 12 18:31:45 evas_object_show ((Evas_Object*) b); Jan 12 18:31:54 edje_object_part_swallow (((Page*) self)->edje, "swallow", (Evas_Object*) b); Jan 12 18:32:00 hmm, wit Jan 12 18:32:01 wait Jan 12 18:32:22 _tmp0_ != b ? Jan 12 18:34:21 sorry, missed Jan 12 18:34:23 b = _tmp0_; Jan 12 18:34:30 but here is: Jan 12 18:34:36 _evas_object_del0 (b); Jan 12 18:34:53 ~lart missing memory management rules for parent-child-relationsships in E Jan 12 18:34:53 * apt takes large quantities of Krispy Kream donuts and stuffs them one after another down missing memory management rules's throat until missing memory management rules puts on 150lbs for parent-child-relationsships in E Jan 12 18:35:14 a parent should capture its childs and keep them alive *sigh* Jan 12 18:35:56 hmm, removing it doesn't change the situation Jan 12 18:35:59 still invisible Jan 12 18:36:54 ah! Jan 12 18:36:58 i see my button Jan 12 18:37:01 :) Jan 12 18:37:40 ok, excellent. i will now embed a map widget and link this to the context location stuff Jan 12 18:38:13 ahh, now I see :) Jan 12 18:38:23 * mrmoku already wanted to ask what mickeyl is doing :P Jan 12 18:39:07 i need some real world code to see whether the API is good and works Jan 12 18:39:20 so i figured i demo it with a map view Jan 12 18:39:31 hello everyone Jan 12 18:39:40 but since zhone2 is completely in edje, i have to add some elm stuff Jan 12 18:39:49 otherwise i'd have to rewrite zhone2 in elm Jan 12 18:39:52 which i don't have time for atm. Jan 12 18:39:59 hi EsEhAr Jan 12 18:40:08 bbl, sports time Jan 12 18:40:29 how are you mickeyl ? Jan 12 18:40:30 freesmartphone.org: 03mickey 07aurora * r25b701534aa5 10/zhone2/src/ (Makefile.am locationpage.vala main.vala): zhone2: start w/ location page Jan 12 18:40:51 good, thanks. on my way to sports, will be back later Jan 12 18:40:58 mickeyl: have fun :) Jan 12 18:41:04 hmm ,good Jan 12 18:41:23 EsEhAr: just read your ticket Jan 12 18:41:33 ahan Jan 12 18:41:36 elm_shr_softkey & Jan 12 18:41:42 any idea ? Jan 12 18:41:48 to manually get the button back Jan 12 18:42:15 which flavour of SHR do you use btw. ? Jan 12 18:42:24 unstable Jan 12 18:43:01 it should be fixed the next time we sync shr-unstable to the public Jan 12 18:43:19 due to switching from dbus-glib to gdbus that might still take some time though Jan 12 18:43:19 elm_shr_softkey & this is a command ? Jan 12 18:43:23 yup Jan 12 18:43:32 open the terminal and enter it there Jan 12 18:43:40 not working Jan 12 18:43:42 can't find Jan 12 18:43:50 ouch Jan 12 18:43:51 sorry Jan 12 18:43:56