**** BEGIN LOGGING AT Thu Jan 27 02:59:57 2011 Jan 27 06:04:41 meh, who'd been that? Jan 27 06:04:45 ban? Jan 27 06:28:48 GNUtoo|laptop: late pong :) Jan 27 07:46:14 Guys, sorry for offtopic, but can anyone tell me what should I do to use my BT headset in debian? Jan 27 07:54:44 Q-Master: for music? Jan 27 07:55:34 PaulFertser: not exactly. my powermac has no mic input so i need this headset mostly as a micro Jan 27 07:57:06 Q-Master: try bluez-alsa Jan 27 07:58:10 PaulFertser: already. It sees my headset but there's no any alsa mixer pin for that headset, so I can't route sound there. also I don't want to use pulseaudio Jan 27 07:58:56 Q-Master: pcm.bluetooth { type bluetooth; device $MAC; profile "voice" } or something like that should be in your asoundrc Jan 27 08:00:11 (disclaimer: i haven't actually tried using SCO with bluetooth alsa plugin) Jan 27 08:00:37 that's the problem... nobody seems did Jan 27 08:01:24 Q-Master: but did you actually add that bluetooth device? Jan 27 08:01:47 Q-Master: if yes, it should be available for e.g. aplay -D bluetooth Jan 27 08:02:06 PaulFertser: yep. letme check Jan 27 08:03:04 PaulFertser: aplay -l shows only card 0: SoundByLayout [SoundByLayout], device 0: Master [] Jan 27 08:03:50 Q-Master: then i guess your pcm section is getting ignored or something. Jan 27 08:04:14 PaulFertser: seems so. I've edited the ~/.asoundrc Jan 27 08:41:50 Q-Master: any luck? Jan 27 08:42:02 not yet Jan 27 08:42:09 trying pulseaudio Jan 27 08:42:09 Q-Master: i think you can basically follow the A2DP instructions from our wiki. Jan 27 08:42:44 A2DP instructions are known to work, and the only difference should be ``profile "voice"'' in the alsa config. Jan 27 08:44:54 PaulFertser: gimme url plz Jan 27 08:45:35 Q-Master: http://wiki.openmoko.org/wiki/Manually_using_Bluetooth#Advanced_Audio_Distribution_Profile_.28A2DP.29 Jan 27 08:46:33 PaulFertser: hm... "Jan 27 11:33:44 Deb-G5-QM pulseaudio[2681]: module-bluetooth-device.c: Received error condition: Ошибка ввода/вывода" Jan 27 08:46:48 Q-Master: i wouldn't try using PA... Jan 27 08:47:09 I'd try following bluez4 from http://wiki.openmoko.org/wiki/A2DP Jan 27 08:47:13 PaulFertser: this was just a try Jan 27 08:47:35 :) Jan 27 08:48:36 removing it Jan 27 08:50:03 rebooting Jan 27 08:54:06 <[Rui]> what to do about EFL... Jan 27 08:55:49 <[Rui]> 1.0 is coming right up, but I'm not sure it would be good for us to depend on it Jan 27 08:58:46 why not? Jan 27 09:02:08 * JaMa|wrk wants 1.0 and stop bumping SRCREV :) Jan 27 09:03:51 :) Jan 27 09:05:03 <[Rui]> we don't just bump because of bugs, right? Jan 27 09:17:13 * JaMa|wrk bumps EFL_SRCREV every day after reading svn log, just to spot issues as soon as possible for shorter bisect if needed Jan 27 09:18:10 but after 1.0 I would like to selectively upgrade only changed components, like if ecore-1.0.1 has important bug fixed then everything will stay 1.0 and ecore will be upgraded Jan 27 09:18:51 now with EFL_SRCREV bump we had to rebuild really everything e* related and we _should_ test everything Jan 27 09:51:13 <[Rui]> we'll see. most of what affects us is also E17 and Elementary, those are not going 1.0 Jan 27 09:51:17 <[Rui]> not yet, at least. Jan 27 10:18:12 hi mrmoku Jan 27 10:24:51 [Rui]: yes but the same applies there.. no need to change ecore when we want new elementary snapshot Jan 27 10:25:55 <[Rui]> yes. but I thought all were on EFL_SRCREV :) Jan 27 10:26:08 <[Rui]> are they not? Jan 27 10:38:22 yes now they are.. but later I plan to put D_P = -1 to all _svn based recipes with proper release Jan 27 10:38:30 and use releases where possible Jan 27 10:47:57 hi GNUtoo|laptop Jan 27 10:48:23 this evening I might well need a new kernel :-) Jan 27 10:48:31 mrmoku, I've a somewhat working 2.6.37 DVFS nearly fully rebased Jan 27 10:48:45 the only minor thing that has issues is alsa Jan 27 10:48:46 great thing Jan 27 10:48:54 so I reverted some patches Jan 27 10:48:57 and it works fine Jan 27 10:49:00 but is incomplete Jan 27 10:49:31 http://git.freesmartphone.org/?p=linux-2.6.git;a=shortlog;h=refs/heads/nokia900/dvfs_rebase_wip%2Bsound_revert Jan 27 10:49:46 (nokia900/dvfs_rebase_wip+sound_revert) Jan 27 10:50:13 alsa works but has no headphones support for instance Jan 27 10:50:15 no fmtx Jan 27 10:50:19 and similar stuff Jan 27 10:50:28 some controls are just lacking Jan 27 10:51:11 ok Jan 27 10:59:56 tv-out is supposed to work in alsa Jan 27 11:00:12 but I didn't succeed with alsamixer to make it output something Jan 27 11:00:17 (sound) Jan 27 11:00:27 speaker works well tough Jan 27 11:09:08 ok, will try-out tonight Jan 27 11:31:12 mrmoku, also note that PM needs some sysfs activation Jan 27 11:31:27 for automatic voltage scalling Jan 27 11:40:03 GNUtoo|laptop: isn't that done via CPUFreq? Jan 27 11:40:12 that's what I understood Jan 27 11:40:18 at least the default DVFS Jan 27 11:40:25 sure it is tweakable more Jan 27 11:46:21 morning Jan 27 11:50:58 mrmoku, there is not only DVFS Jan 27 11:51:05 there is OOP.SRF etc.... Jan 27 11:51:08 lots of things Jan 27 11:51:15 hi Jan 27 11:51:29 ok Jan 27 12:46:02 https://wiki.linaro.org/Ofono/n900 Jan 27 12:46:05 interesting Jan 27 12:46:39 for instance http://wiki.meego.com/ARM/N900/Features/CallAudio Jan 27 12:47:41 * mrmoku off to a client and hopefully back with some time Jan 27 12:49:45 ok Jan 27 12:49:49 * GNUtoo|laptop will go too Jan 27 13:13:54 Need some hints on do_install error of unifdef-native-2.4 ... http://pastebin.com/xbE56EGu Jan 27 13:14:23 why is the build broken? Jan 27 13:54:48 It seems that shr-unstable/openembedded has a new bin/install script that is miss functioning Jan 27 13:54:59 what should be done to rectify or work it out? Jan 27 15:39:46 hi Jan 27 16:33:35 heyho Jan 27 16:48:07 hi Jan 27 16:48:17 morphis_, I think I'll get a 50E palm pre Jan 27 16:48:27 GNUtoo|laptop: yeah! Jan 27 16:48:31 from ebay? Jan 27 16:48:32 second hand Jan 27 16:48:33 yes Jan 27 16:48:35 ok Jan 27 16:48:39 with any damages? Jan 27 16:48:46 I don't know Jan 27 16:48:52 already bought? Jan 27 16:48:54 I didn't order it yet Jan 27 16:48:54 no Jan 27 16:49:03 I discussed with mickeyl about that Jan 27 16:49:08 ok Jan 27 16:49:12 he told me there were some availables at 50E Jan 27 16:49:23 so I still have to arrange the details Jan 27 16:49:28 that's the best I think Jan 27 16:49:49 hm ... yes, to have to quick start for you it is the best Jan 27 16:50:18 spending more has some issues: Jan 27 16:50:30 *what if I can't pay mickeyl, the cheapest is the better Jan 27 16:50:38 *wifi doesn't work well Jan 27 16:50:51 so paying a brand new pre-plus isn't worth at this stage Jan 27 16:50:58 s/paying/paying for/ Jan 27 16:50:58 GNUtoo|laptop meant: so paying for a brand new pre-plus isn't worth at this stage Jan 27 16:51:05 ok Jan 27 16:51:12 sounds reasonable Jan 27 16:51:28 yes Jan 27 16:51:33 btw. I had wifi running for about 2 hours yesterday (until I rebooted the device) Jan 27 16:51:37 also I think mickey won't make it for fosdem Jan 27 16:51:39 ok Jan 27 16:51:45 just luck? Jan 27 16:51:48 or code changes Jan 27 16:51:48 ? Jan 27 16:51:51 it highly depends on the load you pack on network Jan 27 16:51:52 no Jan 27 16:52:09 I tried it again and I got it a second time running for about 2 hours Jan 27 16:52:24 ok, so luck Jan 27 16:52:27 with one or two opkg upgrade within Jan 27 16:52:31 maybe Jan 27 16:52:49 but if I start to download some huge files it crashes after some minutes Jan 27 16:52:56 ah ok Jan 27 16:53:05 maybe we should learn tc? Jan 27 16:53:06 I tried with a big movie (around 1,6GB) Jan 27 16:53:10 tc? Jan 27 16:53:17 a command Jan 27 16:53:20 trafic control Jan 27 16:53:26 to limite rates etc... Jan 27 16:53:34 I've the same problem with my laptop Jan 27 16:53:43 an rsync kill the connection Jan 27 16:53:50 rsync trough ssh Jan 27 16:53:56 of a feed for instance Jan 27 16:53:59 to my router Jan 27 16:54:02 so very high load Jan 27 16:54:20 ah ok, that could be an option Jan 27 16:54:27 we should try that Jan 27 16:54:32 ok Jan 27 16:54:36 so you will get your device at fosdem, right? Jan 27 16:54:41 no Jan 27 16:54:44 before or after Jan 27 16:54:50 ah ok Jan 27 16:55:03 mickey won't be able to make it to fosdem Jan 27 16:55:10 btw. first SMS messages are now implemented in libmsmcomm Jan 27 16:55:13 ok Jan 27 16:55:15 yes I saw that Jan 27 16:55:49 ok Jan 27 16:55:54 we need xrandr -o 1 in xf86-video-omapfb Jan 27 16:56:01 and we need it more for the palm-pre Jan 27 16:56:12 -o 1 does what? Jan 27 16:56:16 rotation? Jan 27 16:56:17 because 320x480 isn't great for gaming Jan 27 16:56:19 yes Jan 27 16:56:34 it's in the TODO list in the driver README Jan 27 16:57:23 but there are more important things todo for now Jan 27 16:57:31 ok Jan 27 16:57:40 we can work on this after the basic bits are running Jan 27 16:57:42 I bet Jan 27 16:57:46 yes Jan 27 16:57:48 currently I have to get e17 to work again Jan 27 16:57:54 because I've no idea on what's the state of the palm pre Jan 27 16:57:55 is it crashing on the n900 too? Jan 27 16:57:55 ok Jan 27 16:58:00 no idea Jan 27 16:58:03 ok Jan 27 16:58:08 I've an old rootfs Jan 27 16:58:08 from some days ago Jan 27 16:58:25 should be the case for more than one or two weeks now Jan 27 16:58:38 it crash at starting? Jan 27 16:58:45 jepp Jan 27 16:58:49 some memory fault Jan 27 16:58:50 ouch Jan 27 16:58:58 do you know how to debug it? Jan 27 16:59:05 then you get the first start screen with some black box on it Jan 27 16:59:06 jepp Jan 27 16:59:12 but I need the time for it Jan 27 16:59:13 or have time to dig into it? Jan 27 16:59:17 if you want Jan 27 16:59:19 ok Jan 27 16:59:26 I need a pre for that Jan 27 16:59:31 as I am moving again this weekend and have one exam tomorrow Jan 27 16:59:34 and on monday Jan 27 16:59:34 I'll try to get one as soon as possible Jan 27 16:59:37 ok Jan 27 16:59:49 as then HeinervdmOff is currently trying to get bluetooth working Jan 27 16:59:59 ok nice Jan 27 17:00:05 I implement the relevant bits from hciattach in a fsodeviced plugin Jan 27 17:00:16 he needs bt coex Jan 27 17:00:35 ok Jan 27 17:00:49 coex? Jan 27 17:01:00 bluetooth + wifi coexistance Jan 27 17:01:05 ah ok Jan 27 17:01:09 I bet they share the same antenna Jan 27 17:01:25 could be the case Jan 27 17:01:38 but webos is able to use both at the same time I think Jan 27 17:02:17 jepp I was right Jan 27 17:03:14 yes it just need some code written Jan 27 17:03:28 basically the mac level can handle that Jan 27 17:03:32 to have both at the same time Jan 27 17:05:03 hm why gets fsoeviced started twice Jan 27 17:06:26 hm the init scripts seems buggy Jan 27 17:06:29 starts the daemon twice Jan 27 17:10:38 GNUtoo|laptop: this is what I get when e17 starts: Jan 27 17:10:38 [ 43.930000] Alignment trap: enlightenment (1644) PC=0x359804a4 Instr=0xe5914000 Address=0x002e9175 FSR 0x001 Jan 27 17:10:49 ok Jan 27 17:10:51 and some more of this messages in kernel log Jan 27 17:11:04 that's all? Jan 27 17:11:06 *** glibc detected *** /usr/bin/enlightenment: munmap_chunk(): invalid pointer: 0x002e1148 ** Jan 27 17:11:12 this I get when starting xserver-nodm Jan 27 17:11:12 ah ok Jan 27 17:19:41 hm starting a process without async which loads a kernel module in fsodeviced and it is waiting for fsodeviced's firmwareloader to load the firmware is not good ... Jan 27 17:19:52 :) Jan 27 17:21:48 ok, we need async module loading in fso Jan 27 17:22:29 but now I have to take care about my certification as software tester tomorrow ... Jan 27 17:24:14 ok Jan 27 17:24:31 hmmm Jan 27 17:24:44 xfce46 is nice but hard to use Jan 27 17:24:54 maybe a better gtkrc... Jan 27 17:26:29 i must push a building patch tough Jan 27 17:53:58 hi for all Jan 27 17:54:12 i haved one q Jan 27 17:54:39 im traying to Installation shr in n900 Jan 27 17:54:50 from this link http://wiki.freesmartphone.org/index.php/Hardware/N900/Installation Jan 27 17:55:03 whene i but this comnd Jan 27 17:55:10 chroot /media/mmc1 Jan 27 17:55:19 i haved one error !! Jan 27 17:55:29 chroot: cannot execute /bin/sh: Permission denied Jan 27 17:55:41 whate shoud i do ? Jan 27 17:56:16 any idia ? Jan 27 17:58:52 ok solved Jan 27 18:43:35 JaMa|wrk: hello, ffmpeg does not compile, but on bearstech a build package can be found, how did you do that ? Jan 27 19:04:50 nschle85: I've sent you an e-mail this morning Jan 27 19:05:02 to gmx.de Jan 27 19:05:24 nschle85: in short http://www.mail-archive.com/openembedded-devel@lists.openembedded.org/msg14782.html Jan 27 19:16:18 GNUtoo|laptop: hi, did you push the kernel already? Jan 27 19:16:49 ahh, yes Jan 27 19:16:50 hmm Jan 27 19:19:52 mrmoku, do you want my defconfig? Jan 27 19:20:01 it's not a production defconfig Jan 27 19:20:05 it has debugging Jan 27 19:20:10 it's monolithic Jan 27 19:20:11 no modules Jan 27 19:20:17 or few modules rather Jan 27 19:21:46 GNUtoo|laptop: yup, defconfig would be fine :) Jan 27 19:22:13 and a monolithic debugging monster config is exactly what I want Jan 27 19:24:56 http://pastebin.com/Ajh0vvEP Jan 27 19:24:59 thx Jan 27 19:27:12 hmmm in the alsa mailing list there are patches for headphones Jan 27 19:27:18 so maybe we just wait for that Jan 27 19:27:28 anyway Jan 27 19:27:33 don't forgett to add modem Jan 27 19:27:42 if it's not already there Jan 27 19:27:46 usbnet wifi are there Jan 27 19:27:52 touchscreen and screen are there Jan 27 19:43:37 intones UI doesnt work well in my SHR-U . is there a gui alternative? I tried brightplayer but opkg wont downloaded from opkg.org Jan 27 19:45:25 same for me !! Jan 27 19:45:37 :-/ Jan 27 19:45:57 downloading ..... but nothing !! Jan 27 19:46:32 any idia to do it menual ? Jan 27 19:47:26 i tried "opkg install http://www.opkg.org/packages//brightplayer_0.4_all.ipk" Jan 27 19:47:42 but with no lack. i get an error Jan 27 19:48:42 aha i have error download timed out Jan 27 19:49:00 can you download it with wget? Jan 27 19:49:13 can you ping www.opkg.org? Jan 27 19:50:20 the site work good : http://build.shr-project.org/shr-unstable/ipk/ Jan 27 19:50:45 but from shr not !! Jan 27 19:51:53 ping wont work Jan 27 19:52:01 :( Jan 27 19:52:15 can you ping google.com? Jan 27 19:53:09 neither... Jan 27 19:53:34 but you downloading from http://build.shr-project.org/shr-unstable/ipk/ works? Jan 27 19:53:51 no for me !! Jan 27 19:54:15 then you have a gerneral problem with you network connection Jan 27 19:54:24 are the routes correct? Jan 27 19:54:32 yes Jan 27 19:54:47 i can open site but from shr not Jan 27 19:55:11 i meant the routes on your FR Jan 27 19:55:42 just type "route" in vala-terminal and check the default route Jan 27 19:55:52 or ``ip r'' Jan 27 19:55:59 But anyway that won't work... Jan 27 19:56:33 ping 192.168.1.1 Jan 27 19:56:38 sorry Jan 27 19:59:24 echo 1 > /proc/sys/net/ipv4/ip_forward fixed it Jan 27 20:07:03 chomwitt, hi Jan 27 20:07:12 there are other players Jan 27 20:07:17 such as enjoy Jan 27 20:07:24 Osama, hi Jan 27 20:09:56 GNUtoo|laptop: i'll try it too. intones gives me a headache one hour now.. Jan 27 20:10:08 so at what point are you Jan 27 20:10:17 do you both have networking on SHR? Jan 27 20:10:21 you could try wifi Jan 27 20:10:26 it's simplier than usbnet Jan 27 20:11:07 same for me !! Jan 27 20:11:48 i put this comand : opkg update Jan 27 20:12:19 and stell downloading .... around one houre Jan 27 20:13:05 GNUtoo|laptop: i managed in the past to set up wifi but with trouble and from command line(in SHR-T). no in SHR-U still GUI wifi default tool wont connect me Jan 27 20:13:08 opkg update should take less than one minute Jan 27 20:13:30 i did opkg update ok Jan 27 20:13:39 iliwi doesn't work? Jan 27 20:13:58 because the wifi GUI changed a long time ago Jan 27 20:14:03 chomwitt, give "enjoy" player a try :) Jan 27 20:14:07 and it's now more reliable Jan 27 20:14:07 mmmm it is normal for you ! Jan 27 20:14:17 and also...it had bugfixes recently Jan 27 20:16:20 GNUtoo|laptop, could you add "--enable-fso" in OE_EXTRACONF in enjoy recipe when you have some time please? Jan 27 20:16:20 it is first time for me to boot shr Jan 27 20:16:31 pespin, is the recipe in oe? Jan 27 20:16:39 GNUtoo|laptop, enjoy? sure Jan 27 20:16:45 pespin, oops I mean is it bumped Jan 27 20:16:46 im stell wating to finsh : opkg update Jan 27 20:17:04 Osama, stop waiting Jan 27 20:17:08 GNUtoo|laptop, it's same rev than EFL generic one, so I think nop Jan 27 20:17:14 Osama, try iliwi Jan 27 20:17:28 pespin, so I can't add it, because it won't work Jan 27 20:17:38 do you have a strategy for adding it? Jan 27 20:17:47 i well try Jan 27 20:17:51 we wait for srcrev bump? Jan 27 20:17:55 Osama, ok Jan 27 20:18:01 GNUtoo|laptop, I think it won't fail, just output a warning saying that "--enable-fso is not recognized option. Jan 27 20:18:32 Osama, btw are you involved in libreplanet/fsf ? because there is an user with a nickname similar to yours that is Jan 27 20:18:50 pespin, why not waiting? Jan 27 20:19:05 no Jan 27 20:19:09 if I add it now in the worse case it fails, and in the best one it does nothing Jan 27 20:19:12 Osama, ok Jan 27 20:19:35 GNUtoo|laptop, because then will have to wait even next rev bump so it gets rebuilt. Jan 27 20:19:58 well, we can bump rev, build, send OE patch, clean & build enjoy too Jan 27 20:20:10 pespin, we could do that: Jan 27 20:20:15 1)bump rev Jan 27 20:20:17 but I owuld say it's easier to just send OE patch + rebuild when it's needed Jan 27 20:20:21 2)add --enable-fso Jan 27 20:20:45 what does JaMa|wrk think about that? Jan 27 20:20:54 ah ok, and then rebuild in buildhost Jan 27 20:21:20 JaMa|wrk, have you tried newer EFL revisions? Jan 27 20:22:34 pespin: GNUtoo|laptop: http://gitorious.com/~jama/angstrom/jama-shr-experimental/commit/ca62620b357e294a80c54244f67225625f67cae0 Jan 27 20:23:31 ok Jan 27 20:23:53 I can push it if you need it Jan 27 20:23:54 pespin, is there anything else you want in oe Jan 27 20:23:55 ? Jan 27 20:24:07 pespin, is the rev ok? Jan 27 20:25:40 enjoy wont start in SHR-U. Jan 27 20:26:33 chomwitt, run it from terminal and read the output, you'll se the instructions to create the music library ;) Jan 27 20:27:05 the app used to create the library is called test-lms afaik Jan 27 20:29:30 bbl Jan 27 20:33:35 so should I push and start build now before going zzzz? Jan 27 20:38:00 Lopi, hi Jan 27 20:38:48 hey GNUtoo|laptop Jan 27 20:40:22 i tried to create the database with test-lms (i got a ERROR: could not add conversion charset 'UTF-16BE': Invalid argument). But opening enjoy from its icon seems non-responsive at all.. Jan 27 20:41:17 chomwitt, I think the error is not an error Jan 27 20:41:25 did you follow what post-install said? Jan 27 20:41:30 let me find it Jan 27 20:41:59 you need to install 16BE support Jan 27 20:42:12 i have no knowledge of post-install Jan 27 20:42:13 ah? Jan 27 20:42:23 chomwitt, let me find it for you Jan 27 20:42:45 glibc-gconv-utf-16 glibc-gconv Jan 27 20:43:00 test-lms -m mono -p id3 -i 5000 -s /path/to/your/music/dir /home/root/.config/enjoy/media.db Jan 27 20:43:17 http://patchwork.openembedded.org/patch/3387/ has it in RDEPENDS but lms version someone pushed to OE doesn't Jan 27 20:43:53 that command with a message is printed with an explanation of what it is after running the opkg install command Jan 27 20:44:18 that's what I meant by post-install Jan 27 20:44:24 sorry for beeing cryptic Jan 27 20:46:04 GNUtoo|laptop: it seems very like the 'transfer big files over wifi' is the problem on the palm pre Jan 27 20:46:42 ok Jan 27 20:46:51 any sphil kernal for shr ? and from where i can get ? Jan 27 20:47:42 sphil ??? Jan 27 20:47:54 did I say that? Jan 27 20:48:28 specific* Jan 27 20:48:44 yes Jan 27 20:48:55 i gave the test-lms you gave with no result. Jan 27 20:48:56 it's in the same place where you downloaded the rootfs Jan 27 20:49:07 and it is maybe in your rootfs Jan 27 20:49:20 depending on if you use it on microsd or on flash(NAND) Jan 27 20:49:25 GNUtoo|laptop: unfortunately i dont remember the opkg post install text.. Jan 27 20:49:51 i used microsd Jan 27 20:50:33 Osama, remove the <> when talking to me, it make me think you are quoting me Jan 27 20:50:46 chomwitt, that's why I printed it to you Jan 27 20:51:27 GNUtoo|laptop: thanks. but unfortunately again enjoy is not responive and trying to slide the volume bar crashes. Jan 27 20:51:30 chomwitt, http://pastebin.com/sMArsftF <- here's the full text Jan 27 20:51:42 chomwitt, complain to pespin Jan 27 20:51:52 GNUtoo|laptop: aha sory Jan 27 20:51:54 chomwitt, I think you lack some dependencies Jan 27 20:52:02 Osama, np Jan 27 20:52:25 hm, and we have some problem with the display now: http://pastebin.com/xs5bREVG Jan 27 20:52:28 GNUtoo|laptop: i'll try to install the 16BE support JaMa talked about Jan 27 20:52:40 chomwitt, yes, also run the application in terminal Jan 27 20:52:46 I mean enjoy Jan 27 20:53:00 and check if you have gst-plugin-volume installed Jan 27 20:59:32 I forgott to paste that: "enjoy: Use test-lms -P to see available formats that can be scanned" Jan 27 21:05:53 GNUtoo|laptop: http://pastebin.com/L1asMPxn Jan 27 21:06:10 ok Jan 27 21:06:12 install that: Jan 27 21:06:24 gst-plugin-volume Jan 27 21:06:39 ah ouch Jan 27 21:06:46 I didn't saw the last part Jan 27 21:06:56 chomwitt, I don't know enough enjoy Jan 27 21:07:01 pespin does Jan 27 21:07:31 bbl Jan 27 21:07:37 he'll be back later..... Jan 27 21:08:30