**** BEGIN LOGGING AT Fri Mar 04 02:59:59 2011 Mar 04 06:45:20 moin Mar 04 06:51:09 moin Mar 04 06:52:40 NOTE: package linux-openmoko-2.6.37+2.6.38-rc7+gitr0+cbdbb4c1d22e26f9d5314fefe6f2c7e5ed7f6a0f-r0-oe0: task do_compile: Started Mar 04 06:52:43 :) Mar 04 06:52:53 :) Mar 04 06:53:08 and failed :) Mar 04 06:53:10 hehe Mar 04 06:54:01 * JaMa off to job Mar 04 08:02:53 * mrmoku off to office too Mar 04 08:44:40 morgen Mar 04 08:47:00 cargill: also from cz? there are quite some cz ppl then :) Mar 04 08:54:34 moin Mar 04 09:01:14 "setup-local does not exist, please update your conf/auto.conf and copy setup-local from common directory" Mar 04 09:01:20 what do I need to update ? Mar 04 09:06:58 setup-local from common directory :) Mar 04 09:07:14 and diff conf/auto.conf ../common/conf/auto.conf Mar 04 09:09:29 morning JaMa|Wrk Mar 04 09:09:40 vanous: dobre rano :) Mar 04 09:09:46 JaMa|Wrk: dobre! Mar 04 09:09:59 am just asking on #maemo about the uboot stuff Mar 04 09:10:06 it just doesn't boot maemo Mar 04 09:10:23 here it really does Mar 04 09:10:28 i gave in last night Mar 04 09:10:36 JaMa|Wrk: i do believe you :) Mar 04 09:17:18 someone crazy enough to try to boot 2.6.38-rc7 on gta? :) Mar 04 09:22:50 JaMa|Wrk: where does it grow? Mar 04 09:23:02 perhaps this will boot better then maemo for me :) Mar 04 09:23:21 http://build.shr-project.org/shr-kms/ Mar 04 09:39:02 JaMa|Wrk: hmm, lines scrolling fast across the display :)) Mar 04 09:39:53 but it doesn't boot Mar 04 09:39:56 and i cannot read it Mar 04 09:40:09 will give it another 5 minutes to scroll through Mar 04 09:40:49 JaMa|Wrk: i disabled splash and quiet, now enabled quiet but still lines... so it probably loops somewhere... Mar 04 09:42:41 scrolling stopped Mar 04 09:47:56 last error? Mar 04 09:51:50 actually not sure if error Mar 04 09:53:46 brb Mar 04 09:54:52 JaMa|Wrk: ping Mar 04 09:55:07 JaMa|Wrk: why not replace pyphonelog by ffphonelog by default? Mar 04 09:57:49 I'm not using them, so if ffphonelog is complete replacement without bugs I'll change it Mar 04 10:05:06 vanous: btw for 2.6.38-rc* this still holds I guess "To test 2.6.37 kernel you have to switch back to evdev driver 'sed -i "s/tslib/evdev/g" /etc/X11/xorg.conf'" Mar 04 10:05:21 vanous: that could be the reason why you don't see xserver running Mar 04 10:07:36 JaMa|Wrk: but i should get init etc, or? Mar 04 10:07:54 my last lines are Mar 04 10:08:41 vanous: yes Mar 04 10:08:48 numbers... (__irq_svc+0x24/0xa0)numbers Mar 04 10:08:52 SHR: 03Martin.Jansa 07shr-makefile * r689990704d4f 10/ (6 files in 2 dirs): shr-core: add own set of conf files Mar 04 10:08:53 SHR: 03Martin.Jansa 07shr-makefile * r1e7f66005598 10/Makefile: Makefile: fix typo Mar 04 10:08:53 SHR: 03Martin.Jansa 07shr-makefile * r6932fb317097 10/Makefile: shr-core Mar 04 10:08:54 SHR: 03Martin.Jansa 07shr-makefile * r509b22f1d4c1 10/Makefile: Makefile: initiall shr-core support Mar 04 10:08:55 SHR: 03Martin.Jansa 07shr-makefile * r5128018c9588 10/Makefile: Makefile: small fix Mar 04 10:08:56 default_idle Mar 04 10:09:02 cpu_idle Mar 04 10:09:18 start_kernel+0x26c/0x2c4 Mar 04 10:09:40 so only kernel stuff Mar 04 10:10:06 having full screen would be better Mar 04 10:10:59 ahh.. ok, so better to wait for 2.6.38 relase and new branches from larsc Mar 04 10:12:00 JaMa|Wrk: i tried 2.6.38 - i have even branch that compiles, but it does not boot for me :( Mar 04 10:12:47 JaMa|Wrk: didnt have time yet to look into it Mar 04 10:12:51 my branch also compiles (rebased larsc's patches to current master), but does not boot for vanous Mar 04 10:13:07 haven't tried to boot on my fr (because it's remote again) Mar 04 10:13:14 JaMa|Wrk: as for uboot on n900 Mar 04 10:13:26 radekp: http://gitorious.org/~jama/htc-msm-2-6-32/openmoko-kernel/commit/1df9b7a378b9e0a7600c1156d94c367f667a79bd Mar 04 10:13:38 radekp: was only change needed for me to build it properly Mar 04 10:13:42 last night, i took powerkernel package, extracted it and combined with uboot Mar 04 10:13:44 no luck Mar 04 10:14:03 but then i flashed just the same kernel and voila Mar 04 10:14:10 vanous: have you tried that kernel from me, after removing battery and booting with kbd closed? Mar 04 10:14:15 so it's uboot t Mar 04 10:14:18 ups Mar 04 10:14:20 yes Mar 04 10:14:37 and i will still try more Mar 04 10:14:44 as i am not happy not being able to boot Mar 04 10:14:54 i had the same some weeks ago so i gave it some time Mar 04 10:15:09 and modules now installed in maemo, right? Mar 04 10:15:25 actualy DocScrutinizer said that he needs only to install powerkernek+uboot and all runs for him Mar 04 10:15:37 for me this runs if i only have powerkernel without uboot Mar 04 10:15:44 then i don't see how same u-boot+kernel image binary works ok for me and not for you Mar 04 10:15:56 JaMa|Wrk: i am checking on the modules now Mar 04 10:16:14 but they must be there otherwise nothing would work i presume Mar 04 10:16:25 y Mar 04 10:16:26 JaMa|Wrk: exactly Mar 04 10:16:49 well I said I installed the package via Hildon App Manager, and I guess it cares about dependencies like PK46-modules Mar 04 10:17:08 * vanous checking on modules now Mar 04 10:17:47 * vanous previously installed via both fapman and apt Mar 04 10:18:00 yeah, which most likely broke it Mar 04 10:19:46 general advice: don't use fapman, doublecheck what you're doing before using apt-get Mar 04 10:20:23 2 days ago somebody complained about starhash-enabler not working after install via apt Mar 04 10:21:42 now *#-ena really is a brainless pkg consisting only of a 5liner postinstall, and that obviously didn't work when running via apt-get as it tries to pop up a notifier, same like powerkernel does Mar 04 10:24:07 X11 popup from postinstall? Mar 04 10:24:13 I gather running apt-get (or fapman for this topic) without run-standalone.sh will make dbus-session calls fail so any notifiers throw an error and postinstalls don't run correctly if they try to notify user Mar 04 10:25:42 powerkernel+uboot pkg has such notifier in preinstall script, *#-ena has same in postinstall. Both fail when installed via apt-get Mar 04 10:26:54 DocScrutinizer have modules installed OK Mar 04 10:27:14 DocScrutinizer will try to reinstall via ham Mar 04 10:28:07 vanous: I'm not interested in analyzing pl46-uboot pkg on WHY it fails with fapman/apt. I'm sure I got the root cause hit on the head with my explanaton above Mar 04 10:28:14 JaMa|Wrk: yep but I have no setup-local file in shr-u dir anymore. plus auto.conf overwrite setup-local or the other side ? Mar 04 10:29:01 reintall doesn't work, you need to completely uninstall prior to installing via HAM, otherwise HAM doesn't install sub-pkgs that allegedly already are Mar 04 10:29:06 afaik Mar 04 10:29:59 however nota bene uninstalling a kernel is a poor idea Mar 04 10:30:14 as it will break system afaik ;-D Mar 04 10:30:17 yup, thats what i am doing now Mar 04 10:30:41 not referring to breaking the system though :) Mar 04 10:36:05 GarthPS: ? you need to copy setup-local from common directory (there never was one) Mar 04 10:36:30 GarthPS: and you can replace your own auto.conf with version from common/auto.conf Mar 04 10:36:50 GarthPS: or just read http://wiki.shr-project.org/trac/wiki/Building%20SHR#Recreateconfigfiles Mar 04 10:40:21 JaMa|Wrk: ffphonelog is faster and i didnt see bugs with it Mar 04 10:43:39 alexxy: ok, changing it now Mar 04 10:44:01 JaMa|Wrk: btw i will add kde-4.6.1 today Mar 04 10:44:27 JaMa|Wrk: ok thx Mar 04 10:45:02 alexxy: great, I still don't have those tarballs, but now I'll be away from my desktop for 3 days, so enough time to get them and build it remotely :) Mar 04 10:45:23 JaMa|Wrk: they still dont available to regular users Mar 04 10:45:39 and i'm not sure if there will be last second changes Mar 04 10:45:40 I know (lftp still doesn't show them :)) Mar 04 10:48:54 last 83 errors to build shr-lite-image in shr-core ;) http://paste.pocoo.org/show/347906/ Mar 04 10:49:43 could be worse ;) Mar 04 10:54:08 lindi-: (X from postinst) yeah, odd. Have to check at least for *#-ena how to catch errors on that. It's not elementary for operation of the install, but it also shouldn't break things when it fails for whatever reason Mar 04 10:59:19 morphis: wrt. your patch: since handleInputEvent() is a time critical function, i'd prefer a global switch that triggers whether ignoringPerState will be honored or not. That way we don't have to consult the config _every_ time we handle an input event Mar 04 10:59:29 morphis, hi Mar 04 10:59:37 morphis: also, you should probably cache the information from the config Mar 04 11:00:07 (if SmartKeyFile is not being cached already, that should be checked) Mar 04 11:00:49 heyho Mar 04 11:00:53 mickey|office: ok Mar 04 11:01:18 mickey|office: the ignore_by_id information is already cached from the config in a hashmap stored within the class Mar 04 11:01:19 other than that, i'm ok with the patch going in. i still don't like it, but i see that you don't have any other option atm. Mar 04 11:01:25 morphis: (cached) ok, good Mar 04 11:02:15 mickey|office: ok, but it's only a workaround until some else has more time to solve the problem in a better way Mar 04 11:02:22 s/some/someone/ Mar 04 11:02:23 morphis meant: mickey|office: ok, but it's only a workaround until someone else has more time to solve the problem in a better way Mar 04 11:02:30 right Mar 04 11:02:49 but the ignorePerState thing I will do Mar 04 11:03:08 but then I will do it on top of the first patch and push them together Mar 04 11:03:14 ok Mar 04 11:06:08 boys listen: I am planing to release a first developer preview of an SHR image for the palmpre this weekend Mar 04 11:06:45 excellent Mar 04 11:07:01 what should be in: working suspend/resume, correct idle state handling (lock screen etc.), basic keyboard handling, basics telephony (no automatic audio routing!) Mar 04 11:07:27 but you can answer/release/hangup a incomming call and even make an outgoing call Mar 04 11:09:17 ok, no luck, uboot still not booting maemo Mar 04 11:09:42 steps i have done Mar 04 11:09:50 restore original kernel: apt-get install --reinstall -y kernel kernel-flasher Mar 04 11:10:03 remove pk46: apt-get remove -y kernel-power kernel-power-modules Mar 04 11:10:07 check and reboot Mar 04 11:10:17 maemo orig kernel boots ok Mar 04 11:10:27 via ham i install pk46 Mar 04 11:10:35 reboot, pk46 boots ok Mar 04 11:10:48 via ham installed uboot for pk46 Mar 04 11:10:50 reboot Mar 04 11:11:15 uboot starts, "Starting kernel..." and end Mar 04 11:11:47 so shile i can get maemo booting with pk46 and SHR with any kernel+uboot, i cannot get maemo to boot with uboot Mar 04 11:11:57 s/shile/while/ Mar 04 11:11:57 vanous meant: so while i can get maemo booting with pk46 and SHR with any kernel+uboot, i cannot get maemo to boot with uboot Mar 04 11:15:11 mrmoku, at what point are you with modem? Mar 04 11:15:53 morphis, should I expect a response from palm? no response is comming Mar 04 11:16:12 GNUtoo|laptop: I hope they will response Mar 04 11:16:18 but give them some days Mar 04 11:16:30 ok Mar 04 11:16:41 some day or 1 week? Mar 04 11:16:51 I can wait Mar 04 11:18:43 btw xrandr -o 1 is broken on om-gta02 Mar 04 11:18:50 should I open a track ticket? Mar 04 11:19:05 or is it well known? Mar 04 11:21:39 someone wrote it on ML at least twice, don't remember if filled ticket too Mar 04 11:21:54 but it's since we switched from KMS driver to normal Mar 04 11:21:57 lunch Mar 04 11:23:32 captainigloo: ping Mar 04 11:24:43 GNUtoo|laptop: are there some keys like a fn-key on the keyboard of the htc dream? Mar 04 11:27:05 mickey|office: why we are doing this "please always wrap logger.debug in assert(), so we can get rid of it completely" ? Mar 04 11:27:23 GNUtoo|laptop: accelges is probably not working because they use event2/3 which is now event3/4. i think we should report this upstream Mar 04 11:28:37 morphis: pong Mar 04 11:28:54 captainigloo: I have some great idea for elfe: https://wiki.ubuntu.com/Unity/LauncherAPI Mar 04 11:29:13 something like that would be really really nice to have Mar 04 11:29:51 captainigloo: and btw. I showed elfe yesterday to raster and I think he really likes it :) Mar 04 11:30:38 captainigloo: he has even written some launcher (quick and dirty) to show at cebit and it's is mostly the same as elfe Mar 04 11:32:19 captainigloo: I don't know how to integrate a dbus api for the launcher the right way into elfe but if you are fine with the idea I can try to implement some first bits Mar 04 11:33:55 morphis need to go be back later Mar 04 11:33:58 sorry Mar 04 11:34:04 captainigloo: no problem Mar 04 11:34:16 captainigloo: or send me a mail with your thoughts about it Mar 04 11:34:32 just need to know what you want to do with dbus ;) Mar 04 11:34:51 did you have some photo/video of raster launcher ? Mar 04 11:34:59 arg, i'm away Mar 04 11:35:04 bye :) Mar 04 11:35:05 captainigloo: no, it was only some quick and dirty thing Mar 04 11:35:09 captainigloo: bye Mar 04 11:35:56 morphis: every statement you wrap in assert, you can later remove completely from the code by specifying G_DISABLE_ASSERT. Once we release certain portions of our stack, we want to get rid of the debug statements (which are costing performance). Mar 04 11:36:36 mickey|office: ah great, didn't know G_DISABLE_ASSERT until now Mar 04 11:37:44 elisa42, upstream is working at microsoft now Mar 04 11:37:49 morphis, http://wiki.freesmartphone.org/index.php/Image:Htcdream.JPG Mar 04 11:37:58 so yes there is fn key Mar 04 11:38:07 ok Mar 04 11:38:49 GNUtoo|laptop: as on the palmpre we have the "orange" key Mar 04 11:39:02 which let's you insert :;-_ and so on Mar 04 11:39:16 I can specifiy key combinations in xkeyboard-config? Mar 04 11:41:42 GNUtoo|laptop: so the project is dead and no ones going to fix it? Mar 04 11:44:15 morphis, I'll tell you when I finish eating Mar 04 11:44:20 elisa42, it can be fix in oe Mar 04 11:45:31 GNUtoo|laptop: ok :) Mar 04 11:45:43 GNUtoo|laptop: ok Mar 04 11:49:49 mrmoku: do you have any problems with making shr's e-wm config machine specific? Mar 04 11:50:22 mrmoku: I would like to add a --with-machine configure option to enable machine specific configuration settings for e-wm Mar 04 11:50:35 or should we create another configuration for each machine? Mar 04 11:56:40 elisa42, do you have a patch? Mar 04 11:57:33 GNUtoo|laptop: at the moment i'm trying to build it with bitbake Mar 04 11:57:43 morphis, you can but only for "secondary" keys Mar 04 11:57:49 for instance Mar 04 11:57:56 Tab won't work with gtk Mar 04 11:58:03 but _ | : etc... will Mar 04 11:58:12 ctrl won't Mar 04 11:58:26 elisa42, it's in the feeds Mar 04 12:00:00 GNUtoo|laptop: i changed the input devices in the source code. maybe it works with this simple change Mar 04 12:00:11 DocScrutinizer i have tried what i could, last chance i see is to try rootfs reflash vith fiasco image Mar 04 12:00:17 ok Mar 04 12:00:22 I'm looking at the config Mar 04 12:00:35 GNUtoo|laptop: hm ok Mar 04 12:01:17 vanous: dpkg -i *kernel *modules *flasher Mar 04 12:01:19 I think that even nokia had the same problem Mar 04 12:01:23 with maemo Mar 04 12:01:32 for instance the italian keyboard Mar 04 12:01:40 is different for the n900 Mar 04 12:02:04 function+left = up Mar 04 12:02:12 function+right = down Mar 04 12:02:21 and that doesn't work well Mar 04 12:02:23 in games Mar 04 12:02:24 etc... Mar 04 12:10:02 hm ok Mar 04 12:10:28 DocScrutinizer that is working and booting, but upon installing uboot, no luck Mar 04 12:11:56 ask mohammad on #maemo, the PK46-ubbot pkg is maintained by him Mar 04 12:23:17 freesmartphone.org: 03morphis 07cornucopia * r91846a3ea440 10/fsogsmd/src/plugins/modem_qualcomm_palm/ (callhandler.vala unsolicited.vala): fsogsmd: modem_qualcomm_palm: be more verbose in callhandler and fix call status announcement Mar 04 12:23:19 freesmartphone.org: 03morphis 07cornucopia * r3c5d74167ab3 10/fsousaged/src/plugins/lowlevel_palmpre/plugin.vala: fsousaged: lowlevel_palmpre: parse wakeup events correctly Mar 04 12:23:20 freesmartphone.org: 03morphis 07cornucopia * rb8457fae053b 10/fsodeviced/conf/palm_pre/fsodeviced.conf: fsodeviced: palmpre config: update some settings Mar 04 12:23:21 freesmartphone.org: 03morphis 07cornucopia * rd3b53e30fafc 10/fsodeviced/src/plugins/kernel_idle/plugin.vala: fsodeviced: kernel_idle: add config option to ignore input events in specific idle states Mar 04 12:23:22 freesmartphone.org: 03morphis 07cornucopia * r900910500c8b 10/fsodeviced/src/plugins/kernel_idle/plugin.vala: fsodeviced: kernel_idle: check if ids to ignore exists before we do the real check Mar 04 12:26:26 morphis: back Mar 04 12:26:33 captainigloo: ok Mar 04 12:28:08 morphis: what you want to do with dbus ? Mar 04 12:28:36 captainigloo: look at this: https://wiki.ubuntu.com/Unity/LauncherAPI Mar 04 12:28:52 for example this picture: https://wiki.ubuntu.com/Unity/LauncherAPI?action=AttachFile&do=get&target=unityapi.png Mar 04 12:29:08 you see there is a number printed on the app icon Mar 04 12:29:10 yes Mar 04 12:29:16 indicating the number of unread messages Mar 04 12:29:18 yes ok i see Mar 04 12:29:26 and a bar indicates the process Mar 04 12:29:37 I would like to have something like this in elfe too Mar 04 12:30:06 and as ubuntu already proposed an dbus API for this we can adopt it an implement it it Mar 04 12:31:19 i think a bit about this, and for icons themself, i think that we could use e module for that, i mean a dedicated module with the icon of the app and text for unread messagesand progress Mar 04 12:31:47 if tehre is already a dbus api it's a good thing Mar 04 12:32:02 but : While the libunity is unstable, the DBus protocol underneath is even more so. We strongly discourage anyone from relying on it Mar 04 12:32:11 :) Mar 04 12:32:20 yeah :) Mar 04 12:32:27 but anyway elfe is unstable too :) Mar 04 12:32:34 yeah indeed :) Mar 04 12:32:50 is it much work to implement this? Mar 04 12:33:10 integarted dbus in efle is easy Mar 04 12:33:13 with e_dbus Mar 04 12:33:24 ok Mar 04 12:33:37 but i think that we could add a specifi cases of unity dbus protocol in e_dbus Mar 04 12:34:09 it's already the case forhal_dbus, ofono or other sevices relying on dbus Mar 04 12:34:43 ok Mar 04 12:34:52 this thing here https://wiki.ubuntu.com/Unity/LauncherAPI?action=AttachFile&do=get&target=quicklilst-static-entry.png Mar 04 12:34:56 is even interesting Mar 04 12:35:08 you have an app icon and press your finger for about 2s on it Mar 04 12:35:12 then a menu pops up Mar 04 12:35:33 with settings the app exposed (but the app have to be running the background for this) Mar 04 12:35:42 ok, with specific actions send on dbus Mar 04 12:38:22 jepp Mar 04 12:38:55 elisa42, ah it's in accelneo/src/accelneo.c Mar 04 12:39:27 it seem hardcoded Mar 04 12:39:36 which is bad for other devices Mar 04 12:39:40 like nokia900 Mar 04 12:41:31 morphis: (e-wm config) have no opinion yet Mar 04 12:41:55 guess we have to do different configs for different machines Mar 04 12:42:05 dunno what the most elegant way is Mar 04 12:42:18 there's probably a large portion of the config that is equal for all Mar 04 12:56:18 mrmoku: ok, I will have a look at current e-wm config for shr Mar 04 12:57:27 ok Mar 04 12:58:26 what's inside that config? Mar 04 13:08:29 GNUtoo|htcdream: http://git.shr-project.org/git/?p=shr-themes.git;a=tree;f=e-wm/e-wm-config-illume2-shr;h=4a1dfe8a09842f86ba8eca456a16290da0709348;hb=1564a06ebf8680a2824f5d0db0616279e72c5296 Mar 04 13:14:53 e-wm-config == shr-themes? Mar 04 13:17:58 shr-themes repo is shared by many things Mar 04 13:18:09 yes i saw Mar 04 13:18:25 there is even frameworkd.conf in it Mar 04 13:18:59 i'll look better Mar 04 13:21:02 ok it's the illume2 profile... Mar 04 13:39:38 elisa42, patching the code doesn't solve the problem Mar 04 13:39:49 with that command line: Mar 04 13:39:58 gesm --neo2 --config /etc/accelges/neo2/ --accel Mar 04 13:40:02 GNUtoo|laptop: ok Mar 04 13:40:07 it shows all zeros? Mar 04 13:40:11 it prints only the screen like that: Mar 04 13:40:12 yes Mar 04 13:40:16 +0.000000 +0.000000 +0.000000 Mar 04 13:40:19 altough: Mar 04 13:40:28 and hexdump works Mar 04 13:40:30 probably Mar 04 13:40:39 I use evtest Mar 04 13:40:45 gesm 365 root 3r CHR 13,67 0t0 151 /dev/input/event3 Mar 04 13:40:59 that's the proof that I modified the source correclty Mar 04 13:41:01 *correctly Mar 04 13:41:27 there is also the event1 as touchscreen: Mar 04 13:41:29 gesm 365 root 4r CHR 13,65 0t0 149 /dev/input/event1 Mar 04 13:41:37 yup. then theres another problem. maybe the format changed Mar 04 13:41:44 uhhh Mar 04 13:41:45 format? Mar 04 13:41:49 that's unlikely Mar 04 13:41:53 oke.. Mar 04 13:41:58 it's a kernel/userland interface Mar 04 13:42:03 it's /dev/input/ format Mar 04 13:42:08 so unlikely to change Mar 04 13:42:22 i know. but why does it then print out only zeros Mar 04 13:42:33 I'll try something Mar 04 13:43:18 disabling fso didn't work Mar 04 13:43:20 hmmm Mar 04 13:43:40 becuase there is no acceleration on touchscreen Mar 04 13:43:52 well that should not be a problem as hexdumping /dev/input/event3 works Mar 04 13:44:00 use evtest Mar 04 13:44:06 evtest is better than hexdump Mar 04 13:44:16 y? Mar 04 13:44:18 it event prints the name of the input Mar 04 13:45:33 ok i just looked them up in /sys but evtest is really better :) Mar 04 13:45:55 if (rel == 2) Mar 04 13:45:59 what is rel? Mar 04 13:48:39 no idea Mar 04 13:51:17 Who do I need to contact to suggest modifications to a git tree? Mar 04 13:51:23 (Hi all, btw ;-) ) Mar 04 13:51:35 it depend on the tree Mar 04 13:51:56 openembedded tree in SHR-U repo (I guess it's in that repo) Mar 04 13:52:55 maybe rel is relative Mar 04 13:53:02 and maybe the format indeed changed Mar 04 13:53:04 I'll look Mar 04 13:53:57 No, I want to suggest an addition. No need to check anything, I guess! Mar 04 13:54:56 See http://pastebin.com/akP0au0f Mar 04 13:56:31 ah it's the openembedded Makefile? Mar 04 13:56:38 if so talk to JaMa|Wrk Mar 04 13:57:36 JaMa|Wrk: Did you see the pastebin I just, uhm, pasted? It's a small addition to openembedded.mk. I added '-k' to bitbake, so that building an image would take it as far as it could get. Mar 04 14:10:25 GNUtoo|laptop: read http://wiki.openmoko.org/wiki/Accelerometer_data_retrieval#Data_structure to understand what rel means Mar 04 14:10:44 thanks Mar 04 14:10:45 JaMa|Wrk: Ah, I see, massive changes... I'll work it out :-) Mar 04 14:16:45 +0.648000 +0.702000 +0.702000 Mar 04 14:16:49 thanks Mar 04 14:16:53 thanks a lot Mar 04 14:17:11 yw Mar 04 14:18:21 now how do I use that software Mar 04 14:18:31 I trained the gesutre Mar 04 14:18:38 but how to associate actions with it Mar 04 14:18:55 did you read the wikipage about it? Mar 04 14:19:06 about accelges Mar 04 14:19:50 I'll reread it Mar 04 14:19:55 I read it long time ago Mar 04 14:20:54 ok i think you can listen to dbus signals Mar 04 14:24:48 it seem to work Mar 04 14:24:58 altough the notifications are ugly on illume Mar 04 14:25:20 basically code wise Mar 04 14:25:36 nano accelneo.c Mar 04 14:25:38 then Mar 04 14:25:55 change that line: Mar 04 14:26:00 if (rel == 2) Mar 04 14:26:01 to Mar 04 14:26:02 if (rel == 3) Mar 04 14:26:08 and also change the input nodes Mar 04 14:26:23 to event3 and event4 Mar 04 14:26:25 and it works Mar 04 14:27:16 http://scap.linuxtogo.org/ Mar 04 14:36:05 ??? Mar 04 14:36:11 now it seem to work even better Mar 04 14:36:15 altough I did nothing Mar 04 14:40:13 JaMa|Wrk, accelges is in feeds right? Mar 04 14:40:30 what happens if I mark it MACHINE_ARCH + COMPATIBLE_MACHINE=om-gta02? Mar 04 14:42:10 ah maybe for other devices we should add acceln900.c Mar 04 14:42:13 or similar? Mar 04 14:42:18 but that'll happend later Mar 04 14:43:19 ChristW_: openembedded.mk was removed few days ago Mar 04 14:43:49 GNUtoo|laptop: IIRC yes Mar 04 14:44:12 so can I mark it compatible machine om-gta02? Mar 04 14:45:03 GNUtoo|laptop: if it works only on gta02 then yes, and move it to machine-specific part of task-shr-feed.bb Mar 04 14:45:16 ok Mar 04 14:45:30 it has hardcoded devices nodes in code Mar 04 14:45:37 not even #define Mar 04 14:45:42 GNUtoo|laptop: tbh many OM/SHR apps works only on gta02 and even expects certain kernel/sysfs nodes Mar 04 14:45:55 GNUtoo|laptop: without being marked as gta ONLY Mar 04 14:45:55 ok Mar 04 14:46:00 ah ok Mar 04 14:46:09 so I'll fix now for newer kenrel Mar 04 14:46:18 ok, thanks Mar 04 14:46:26 and add compatible machine later Mar 04 14:48:05 btw accelges should be in openmoko-3rdparty Mar 04 14:48:12 I want to move it now Mar 04 14:48:16 git mv? Mar 04 14:53:13 git rm doesn't want to remove an empty directory Mar 04 14:53:18 how should I move it then Mar 04 14:53:24 JaMa|Wrk, piing I must go out Mar 04 14:53:27 I want to fix before Mar 04 14:54:55 ignore empty directory Mar 04 14:54:59 ok thanks Mar 04 14:55:08 wont be created during checkout if it's empty Mar 04 14:55:14 ok nice Mar 04 14:55:17 thanks a lot Mar 04 14:55:59 yw Mar 04 15:11:11 elisa42, commit pushed in oe Mar 04 15:11:17 thanks a lot!!!! Mar 04 15:11:31 it's been a while since I wanted to fix that program Mar 04 18:12:15 freesmartphone.org: 03morphis 07specs * rea353f32fa0a 10/ (6 files in 5 dirs): Introduce org.freesmartphone.Audio subsystem with initial API draft Mar 04 18:13:20 freesmartphone.org: 03morphis 07specs * r98d13f9f62c4 10/configure.ac: Bump version as new subsystem was introduced Mar 04 18:15:57 freesmartphone.org: 03morphis 07gdbus * r4cfdd060bc1f 10libfso-glib/ (configure.ac src/Makefile.am): Bump version and add new audio subsystem Mar 04 18:22:49 freesmartphone.org: 03morphis 07cornucopia * r02cd0fb0d781 10/libfsoframework/fsoframework/interfaces.vala: libfsoframework: add dbus names for new audio subsystem Mar 04 18:22:50 freesmartphone.org: 03morphis 07cornucopia * re93f908641aa 10/fsoaudiod/ (27 files in 10 dirs): fsoaudiod: initial version of new audio subsystem daemon Mar 04 18:27:48