**** BEGIN LOGGING AT Sun Mar 06 02:59:57 2011 Mar 06 05:31:17 [Rui]: why would it not be fixed on the stable branch, if it's a known bug? Mar 06 08:24:29 antrik: elementary does not even seem to be branched... Mar 06 08:40:42 <[Rui]> antrik: possibly because it would be too much work. Mar 06 08:41:02 <[Rui]> I know there has been a lot of work in TEXTBLOCKs making them a lot faster. Mar 06 09:54:09 <[Rui]> mickey|bbl: interesting challenge: zrrtp in fso, heh? :) Mar 06 09:54:21 <[Rui]> s/zrrtp/zrtp/ Mar 06 09:54:23 [Rui] meant: mickey|bbl: interesting challenge: zrtp in fso, heh? :) Mar 06 10:21:06 GNUtoo|laptop: yo got some good progress on the shr image on hd2 Mar 06 10:21:18 GNUtoo|laptop: I can now debug remotely and have internet Mar 06 10:21:26 GNUtoo|laptop: downloading shr feeds now Mar 06 10:21:28 dcordes_, we don't have the image Mar 06 10:21:37 it's not online anymore Mar 06 10:21:59 Cotulla and you do not have the shr hd2 image ? Mar 06 10:22:38 dcordes_, Cotulla is in #htc-linux Mar 06 10:22:39 and no Mar 06 10:22:42 no one got the image Mar 06 10:22:47 I pinged you many time Mar 06 10:22:50 wrote a mail Mar 06 10:22:58 looked for your phone number but didn't find it Mar 06 10:23:11 because we *need* theses images Mar 06 10:23:36 I will have to go to eat soon Mar 06 10:23:52 GNUtoo|laptop: I told cotulla I finish it first before I upload Mar 06 10:23:57 ok Mar 06 10:24:05 so ping me when you have an image Mar 06 10:24:07 to download Mar 06 10:24:18 check query for my phone # Mar 06 10:24:21 ok Mar 06 10:24:21 and keep the image online next time Mar 06 10:24:43 I need some help with modem debug Mar 06 10:26:32 ok Mar 06 10:26:35 1 sec Mar 06 10:27:28 dcordes_, modem doesn't work right? Mar 06 10:27:31 first Mar 06 10:27:43 did you modify the config files Mar 06 10:27:47 to point to your board Mar 06 10:28:00 for instance cat /proc/cpuinfo is trout for htcdream Mar 06 10:28:03 so you have Mar 06 10:28:13 /etc/freesmartphone/conf/trout Mar 06 10:28:46 modem works to an extent it seems: I see non-error log messages in fosgsmd logfile Mar 06 10:28:54 dialer directly quits when dialing Mar 06 10:29:11 # cat /proc/cpuinfo | grep Hardware Mar 06 10:29:15 Hardware : htcleo Mar 06 10:29:30 so cp -r some_machine htcleo Mar 06 10:29:33 and modify Mar 06 10:29:49 # ls /etc/freesmartphone/conf/ | grep leo Mar 06 10:29:49 htcleo Mar 06 10:29:49 try the qualcomm modem Mar 06 10:29:53 done Mar 06 10:29:55 already Mar 06 10:29:55 also try singleline Mar 06 10:30:02 I moved nexus I think Mar 06 10:30:05 ok Mar 06 10:30:20 is the modem singleline? Mar 06 10:30:30 or the same than dream? Mar 06 10:30:41 yes it's same qsd8250 as your nexus Mar 06 10:30:52 I know that Mar 06 10:30:53 only differences is way GPRS works Mar 06 10:31:09 but I'm not sure I selected the right plugin for nexus Mar 06 10:31:20 ok how to check ? Mar 06 10:31:39 /etc/freesmartphone/conf/htcleo # grep -ri singleline . Mar 06 10:31:39 ./fsogsmd.conf:modem_type = singleline Mar 06 10:31:39 ./fsogsmd.conf:[fsogsm.modem_singleline] Mar 06 10:31:50 sounds good right ? Mar 06 10:36:29 yes Mar 06 10:36:38 then if both modem doesn't work Mar 06 10:36:45 you may need to change the code Mar 06 10:37:30 ok I got the log Mar 06 10:37:35 what's the error? Mar 06 10:38:01 CLCC is calling number presentation? Mar 06 10:38:04 I'll check Mar 06 10:38:16 if so I've fixed it in our replicant ril Mar 06 10:42:21 what's the problem with CLCC ? Mar 06 10:42:32 * dcordes_ s looking for error line Mar 06 10:44:12 GNUtoo|laptop: can you see my call attempt in the log ? Mar 06 10:44:21 ah no I didn't look Mar 06 10:45:04 the call is not in Mar 06 10:45:11 it was made before the beginning of the log Mar 06 10:45:39 try to add that in the initialization: Mar 06 10:46:28 ;+GTKC=2;+CLIP=1 Mar 06 10:46:35 it's in fsogsmd.conf Mar 06 10:46:44 alright do you want to see the log from beginning ? Mar 06 10:46:51 or should I do the init first and restart ? Mar 06 10:47:28 init first Mar 06 10:47:30 do that Mar 06 10:47:33 add the init Mar 06 10:47:38 rm /var/log/fsogsmd Mar 06 10:47:50 pidof fsogsmd Mar 06 10:47:54 killall fsogsmd Mar 06 10:47:58 pidof fsogsmd Mar 06 10:48:07 and a clean log should be created Mar 06 10:49:25 modem_init = E0V1;+CMEE=1;+CRC=1;+CSCS="UCS2";@BRIC=0;+GTKC=2;+CLIP=1 Mar 06 10:50:10 yes Mar 06 10:52:22 I will reboot cause I had some filesystem corruption (fsck on every boot) Mar 06 10:53:44 ok Mar 06 11:01:10 GNUtoo|laptop: ok that is the fresh log with extra init Mar 06 11:01:24 ok Mar 06 11:01:27 looking Mar 06 11:03:06 dcordes_, where's the error Mar 06 11:03:11 I don't see errors Mar 06 11:03:22 you can't call or something like that? Mar 06 11:03:27 I didn't call Mar 06 11:03:30 in that log Mar 06 11:03:42 I get err 257 on call putting log now Mar 06 11:05:12 ok Mar 06 11:06:54 I think I should install the fso cli program Mar 06 11:07:07 is it expected that only dialer program will start but not phone program ? Mar 06 11:08:02 ? Mar 06 11:08:10 If I remember well it worked for me Mar 06 11:08:16 I can try if you want Mar 06 11:09:14 maybe only one of them works ? Mar 06 11:10:07 do you see the call in the new log ? Mar 06 11:11:50 I'll look Mar 06 11:12:08 what is the difference between the dialer and the phone? Mar 06 11:12:15 note that they're just dbus wrapper Mar 06 11:28:15 * dcordes_ pulls oe Mar 06 11:38:55 GNUtoo|laptop: I don't have access to freesmartphone gits Mar 06 11:38:58 GNUtoo|laptop: can you push it ? Mar 06 11:39:21 push waht? Mar 06 11:39:27 I do have access Mar 06 11:39:30 htcleo config with the init Mar 06 11:39:32 but I must go very soon Mar 06 11:39:39 send a patch to the mailing list Mar 06 11:39:44 and I'll try to push it Mar 06 11:39:45 ok Mar 06 11:39:54 if I fail maybe someone else will Mar 06 11:40:01 Or I could do it when I return Mar 06 11:41:41 GNUtoo|laptop: do you have the git url ? Mar 06 11:41:58 of the configs? Mar 06 11:42:00 cornucopia Mar 06 11:42:30 yes Mar 06 11:42:44 git://git.freesmartphone.org/cornucopia.git ? Mar 06 11:43:39 Login error Mar 06 11:43:40 Htc-linux uses cookies to log in users. You have cookies disabled. Please enable them and try again. Mar 06 11:43:45 I've cookies enabled Mar 06 11:43:50 yes Mar 06 11:44:55 GNUtoo|laptop: I had same problem. Will report to admin. can you try different browser ? Mar 06 11:45:06 http://gnutoo.homelinux.org/dcordes/audio_test_programs_qsd.tar.bz2 Mar 06 11:45:19 I've only firefox Mar 06 11:54:13 GNUtoo|nexusone: which mailing list to put it ? http://www.angstrom-distribution.org/~lgorris/htcleo.diff Mar 06 11:54:42 fso userland Mar 06 12:00:18 ok Mar 06 12:08:00 GNUtoo|nexusone: mail sent Mar 06 12:26:08 somebody got local.conf used to compile SHR for n900 ? Mar 06 14:15:19 dcordes_: here it is http://git.shr-project.org/git/?p=shr-makefile.git;a=summary (see what Makefile creates) Mar 06 14:39:38 JaMa: is it based on the old moko makefile from rwhitby ? Mar 06 14:41:52 ~seen rwhitby Mar 06 14:41:57 rwhitby is currently on #webos-internals. Has said a total of 106 messages. Is idling for 3h 34m 9s, last said: 'I think I rebuilt the kernel placeholders with the right metadata flag'. Mar 06 14:44:14 cp common/conf/local.conf shr-stable/conf/local.conf Mar 06 14:44:33 JaMa: it doesn't have much in it :( Mar 06 14:44:53 dcordes_: but that's used to compile SHR for n900 :) Mar 06 14:45:24 dcordes_: and openembedded.mk was droped, now Makefile is only used to setup environment and update git checkouts Mar 06 14:45:44 dcordes_: for the rest we're using just bitbake calls Mar 06 14:46:54 ok Mar 06 14:50:21 JaMa: http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/ Mar 06 15:10:13 JaMa: I was expecting loads of extra env vars and config settings needed for shr as opposed to other distros e.g. angstrom Mar 06 15:10:27 JaMa: last time I built it I remember adding some fso autorev Mar 06 16:01:20 dcordes_: you can add fso-autorev if you want, but currently only shr-u is using shr-autorev Mar 06 16:02:11 JaMa: ok Mar 06 16:02:41 GNUtoo gave me an n900 image that had a dialer and a phone app (with same icon). only one worked. is it expected ? Mar 06 16:03:28 with the program that started I could dial but no call was seen in fsogsmd.log . when using the dbus command line program calling worked Mar 06 16:27:19 hey guys, I'd like to play with modem myself Mar 06 16:27:32 how do I prevent fsogsmd from starting in shr-u? Mar 06 16:28:01 right now I put bogus value into it's config to make sure that it doesn't touch modem Mar 06 16:28:19 however smth constantly spawn new fsogsmd processes Mar 06 16:28:34 who's doing that and how to prevent it? Mar 06 16:29:52 plotr: thanks :) I was wondering same thing today Mar 06 16:30:39 dcordes_: also playing with osmocom? Mar 06 16:31:18 plotr: playing with shr on htc hd2 Mar 06 16:32:49 plotr: make sure that phonefsod and phoneuid don't get started Mar 06 16:32:57 they will dbus-activate fsogsmd Mar 06 16:33:17 freesmartphone, ofono, android ril, osmocom, what am I missing ? Mar 06 16:33:37 radio frameworks for linux Mar 06 16:33:44 plotr: phonefsod you can deactivate by adding exit 0 on top of /etc/init.d/phonefsod Mar 06 16:34:06 plotr: phoneuid get's started by /etc/X11/Xsession.d/80phoneuid Mar 06 16:34:08 just comment it out Mar 06 16:34:26 mrmoku: that's the reason why I didn't find it. the other fso services are named /etc/init.d/fso* Mar 06 16:34:32 not sure if that is all needed though to prevent fsogsmd from being started Mar 06 16:34:34 mrmoku: thanks! it would be nice to have this as config option somewhere in /etc/ Mar 06 16:35:11 plotr: ack Mar 06 16:35:12 plotr: not sure... if you don't want to use phonefsod/phoneuid you can just deinstall them Mar 06 16:36:28 mrmoku: that's the thing - I'd like to disable them for some time - reinstalling is overkill Mar 06 16:37:15 if I do not want asterisk to run by default in ubuntu - I just (un)comment one string in /etc/default/asterisk - I do not uninstall it :) Mar 06 16:40:02 plotr: hmm... good argument :-) Mar 06 16:41:09 something like disable = 1 in /etc/phonefsod.conf ? Mar 06 16:41:16 and if that is set phonefsod will just exit? Mar 06 16:41:28 mrmoku: precisely! Mar 06 16:41:53 note that phonefsod is also doing the screen blanking, locking and suspending Mar 06 16:41:58 that would be disabled then too Mar 06 16:43:14 mrmoku: that's the price I'm ready to pay... besides it's more question of granularity of control over functions - I mean "disable.fsogsmd = 1" might do the trick as well Mar 06 16:46:00 plotr: sure, but that's a lot more work ;) Mar 06 16:46:17 * mrmoku takes a look at the code Mar 06 16:46:39 mrmoku: I thought fsogsmd also read some config? Mar 06 16:47:56 the more I think about it - the more I have to fight desire to re-invent systemd in order to track all start-stop dependencies between various parts of fso :) Mar 06 16:48:58 plotr: sure fsogsmd has it's config... phonefsod will start it regardless though Mar 06 16:50:18 fsogsmd could kill itself upon reading disable=1 from it's own config, although this looks like ugly hack if it will be started every second anyway Mar 06 16:56:35 yup Mar 06 16:56:52 plotr: easiest way would be to disable fsogsmd in the dbus-activation config Mar 06 16:57:07 /usr/share/dbus-1/system-services/fsogsmd or something like that Mar 06 17:01:01 plotr: why are you using the other phone api ? Mar 06 17:01:18 plotr: osmocom vs freesmartphone Mar 06 17:05:35 dcordes_, I'm back Mar 06 17:05:44 dcordes_: it's not about API Mar 06 17:06:08 dcordes_: with osmocom I got complete control over gsm stack - to the very low level Mar 06 17:06:35 with fso - I just have abstraction on top of external modem which can speak gsm Mar 06 17:06:39 GNUtoo|laptop: ok 2 things: I sent fso patch to userland ml as desired and setup oe. compiling now but not sure if I have everything needed in the configs Mar 06 17:07:10 plotr: osmocom dosen't abstract the AT ? Mar 06 17:07:41 plotr: don't you have complete control with minicom, cat, echo & friends ? Mar 06 17:07:50 osmcom...lol Mar 06 17:08:08 GNUtoo|laptop: I sent the htcleo config patch to userland devel Mar 06 17:08:11 dcordes_, imagine that you could replace baseband firmware Mar 06 17:08:18 that's osmcombb Mar 06 17:08:24 but it only works with old modems Mar 06 17:08:29 like the ti calypso Mar 06 17:08:31 ah I get it :) Mar 06 17:08:34 or some motorolla phones Mar 06 17:08:43 yepp Mar 06 17:09:16 they could put AT abstraction on top - it's just nobody volonteered to do so yet Mar 06 17:09:31 no way in hell you can install this on some qualcomm qsd8250 device Mar 06 17:09:36 replacing the stock amss Mar 06 17:10:16 dcordes_, unless you do the work, no way Mar 06 17:10:23 plotr: it reminds me of gnuradio Mar 06 17:10:25 dcordes_: not yet - but if enough documentation would leek and some people would step in to write hardware drivers... ;-) Mar 06 17:10:26 or someone else does it Mar 06 17:10:28 plotr: AT is not that great really Mar 06 17:10:34 * GNUtoo|laptop would love to have an usrp Mar 06 17:11:17 GNUtoo|laptop: save some $$ on lunches and buy one... or try to obtain some university prof - that's the way I've used :-D Mar 06 17:11:38 I could work the summer Mar 06 17:11:44 but I bet even if I work 2 months Mar 06 17:11:51 I'm not sure it would be sufficent Mar 06 17:12:07 because it's like 2000$/E Mar 06 17:12:13 plotr: it's not a bad idea to have uni buy one Mar 06 17:12:17 for a recent one Mar 06 17:12:49 plotr: chances are my university even has one already Mar 06 17:13:22 is the usrp1 sufficent for GSM Mar 06 17:13:28 I know it's not sufficent for wifi Mar 06 17:13:31 hi morphis Mar 06 17:13:32 GNUtoo|laptop: definitely Mar 06 17:13:40 heyho Mar 06 17:13:44 I use usrp1 for gsm base station Mar 06 17:13:57 also, how much does the test license cost? Mar 06 17:14:00 and I use openmoko + osmocom for mobile terminal Mar 06 17:14:08 GNUtoo|laptop: we need to create an image with working phone GUI Mar 06 17:14:11 GNUtoo|laptop: I do not have license :-D Mar 06 17:14:13 GNUtoo|laptop: for cotulla Mar 06 17:14:18 dcordes_, yes Mar 06 17:14:21 sorry for beeing away Mar 06 17:14:33 GNUtoo|laptop: I setup OE but it will take a while. building from scratch you know Mar 06 17:14:46 plotr, you use osmcombb on freerunner, wow, I know where the tutorial is, but what's the status? Mar 06 17:14:50 can you make calls? Mar 06 17:15:03 cough...did you test carrier network? Mar 06 17:15:29 I bet you know the risks of testing carrier network(huge chance of crashing their network) Mar 06 17:15:44 GNUtoo|laptop: I use machine htcleo and distro shr Mar 06 17:15:48 dcordes_, for me the GUI worked Mar 06 17:15:52 some time ago Mar 06 17:16:06 mrmoku, can I push dcordes's patch? Mar 06 17:16:17 GNUtoo|laptop: well you seen in the logs that there was no call after I tried Mar 06 17:16:19 because obviously there are some stuff that is wrong Mar 06 17:16:25 like the alsa support Mar 06 17:16:30 because it has no alsa Mar 06 17:16:43 dcordes_, I'll try then Mar 06 17:16:44 GNUtoo|laptop: isn't it the plan to get alsa ? Mar 06 17:16:45 GNUtoo|laptop: I only did basic tests, but it looks like everything works Mar 06 17:16:55 dcordes_, should I add support for nexusone in oe? Mar 06 17:17:03 dcordes_, yes of course Mar 06 17:17:06 after gps is floss Mar 06 17:17:08 GNUtoo|laptop: ok. yes Mar 06 17:17:13 GSM+3g is known Mar 06 17:17:15 as for provider's network - as long as I only make voice calls it doesn't differ that much from any other phone out there Mar 06 17:17:22 wifi would be problematic Mar 06 17:17:33 maybe I should try to make brcm80211 work Mar 06 17:17:35 GNUtoo|laptop: I think it can't harm to add nexus.. as we will maintain both, nexus and leo Mar 06 17:17:43 ok Mar 06 17:17:48 I'll add nexus then Mar 06 17:17:54 since my usrp's gsm net is visible only in our lab (I do not use power amps) - nobody gives a crap if I work without license Mar 06 17:18:15 plotr: where's your lab? at uni ? Mar 06 17:18:21 * GNUtoo|laptop powers down replicant Mar 06 17:18:26 and will boot SHR Mar 06 17:18:44 GNUtoo|laptop: do I need to add any hacky stuff in local.conf to compile such image as you gave me ? Mar 06 17:18:50 plotr, I'm very interested by what you're doing Mar 06 17:19:02 dcordes_: yepp - if I had enough $$ I would setup one in dorm :) Mar 06 17:19:02 dcordes_, yes you need that: Mar 06 17:19:32 require conf/distro/include/fso-autorev.inc Mar 06 17:19:32 require conf/distro/include/shr-autorev.inc Mar 06 17:19:38 GNUtoo|laptop: http://bb.osmocom.org/trac/wiki/CalypsoRomloader - that would be good starting point :) Mar 06 17:19:45 I know that page Mar 06 17:19:55 it talks about pressing a button to reset the modem etc... Mar 06 17:19:57 but I wonder Mar 06 17:20:06 you don't need fluid right? Mar 06 17:20:14 * GNUtoo|laptop re-looks at the page Mar 06 17:20:20 GNUtoo|laptop: we can ask cotulla to make an osmocom on qsd8250 for leo :D Mar 06 17:20:37 dcordes_, lol but we must ask to make it FLOSS Mar 06 17:20:39 else..... Mar 06 17:20:42 GNUtoo|laptop: haha Mar 06 17:20:58 sorry wrong window for ctrl+w Mar 06 17:21:28 GNUtoo|laptop: he learned that breaking gpl is illegal Mar 06 17:21:40 ok Mar 06 17:21:42 GNUtoo|laptop: just like entire XDA forum Mar 06 17:22:16 it's good to setup OE after such long while Mar 06 17:22:16 plotr, btw what can you do with a 3310? Mar 06 17:23:23 GNUtoo|laptop: as far as I remember it's not supported by osmocom but I might be wrong Mar 06 17:23:43 plotr, yes but I eared that you could do stuff with it, I wonder what Mar 06 17:23:44 anyway Mar 06 17:23:49 there were project called mados for it but it become abandoned before anything working were produced Mar 06 17:23:53 can osmcombb be installed without flashing Mar 06 17:23:56 ah ok Mar 06 17:25:29 yepp, osmocom is "loaded" into baseband chip - after reboot we will get default software again Mar 06 17:25:39 dcordes_, could you clean a bit your config? Mar 06 17:25:39 although I think it could be flashed as well Mar 06 17:25:43 GNUtoo|laptop: again, brcm80211 only supports a few recent chipsets Mar 06 17:25:52 because I'm not sure I'm allowed to push as is Mar 06 17:26:07 antrik, yes but maybe with compat-wireless Mar 06 17:26:18 I saw some 4329 strings in it Mar 06 17:26:39 you told me the support may be incomplete Mar 06 17:27:14 util/hndpmu.c: case BCM4329_CHIP_ID: Mar 06 17:27:17 in linux-next Mar 06 17:27:36 well, perhaps it will be supported in next Linux then ;-) Mar 06 17:27:50 - Support for BCM4329(SDIO) Mar 06 17:27:52 in README Mar 06 17:28:00 :q Mar 06 17:28:02 oops Mar 06 17:28:16 drivers/staging/brcm80211/brcmfmac/README Mar 06 17:30:49 dcordes_, if you want I can comment your config Mar 06 17:30:57 so you address the comments Mar 06 17:30:59 and resend? Mar 06 17:32:32 GNUtoo|laptop: you can just strip the unneeded alsa stuff and commit it right away if you like... Mar 06 17:33:00 there is more to strip Mar 06 17:33:40 GNUtoo|laptop: ok.. actually it's only about the init Mar 06 17:33:59 dcordes_, I comment Mar 06 17:34:02 you address Mar 06 17:34:04 you resend Mar 06 17:34:06 I push Mar 06 17:34:10 if you like .. Mar 06 17:34:13 I've already started that Mar 06 17:34:16 good Mar 06 17:34:19 no problem Mar 06 17:34:41 are you sure there is no need for the alsa ? (=> cotulla experiments ? ) Mar 06 17:39:35 sent Mar 06 17:48:50 dcordes_, that's for routing etc... Mar 06 17:48:55 basically when you have a call Mar 06 17:48:58 it should route Mar 06 17:49:01 and play a sound Mar 06 17:49:16 and also other programs may require fso routing Mar 06 17:49:22 but for now we don't need it Mar 06 17:49:30 we could add later Mar 06 17:49:35 if we keep it Mar 06 17:49:38 it could crash fso Mar 06 17:49:52 for instance if the states files are wrong Mar 06 17:50:00 it can potentially crash fsodeviced Mar 06 17:50:24 which makes cpu usage 100% or makes the phone unusable, no idea which one it does in the case something goes wrong Mar 06 17:55:12 GNUtoo|laptop: leo has 7 keys Mar 06 17:55:17 wow Mar 06 17:55:18 vibrator works Mar 06 17:55:26 ok Mar 06 17:55:35 then keep them in the next patch Mar 06 17:55:42 you send ms to sysfs file Mar 06 17:55:52 ms? Mar 06 17:56:02 ah by works you didn't test wiht mdbus2? Mar 06 17:56:04 *with Mar 06 17:56:06 > +#modem_type = qualcomm_htc Mar 06 17:56:12 remove that Mar 06 17:56:13 why ? Mar 06 17:56:18 because it's a comment Mar 06 17:56:22 that's useless Mar 06 17:56:26 ok Mar 06 17:56:32 i didn't test with mdbus2 Mar 06 17:56:38 it might be different mechanism than on nexus Mar 06 17:57:19 on nexus I didn't test either Mar 06 17:57:29 I didn't even bother to clean and push nexus's files Mar 06 17:58:08 GNUtoo|laptop: http://htc-linux.org/wiki/index.php?title=Leo/Interfaces Mar 06 17:58:15 write vibration time in ms to Mar 06 17:58:15 /sys/devices/virtual/timed_output/vibrator/enable Mar 06 17:58:27 just test it with mdbus2 Mar 06 17:58:58 where is code that does that stuff ? Mar 06 17:59:09 what's the plugin already? Mar 06 17:59:10 I doubt it is correct mechanism Mar 06 18:00:08 ok finally mine booted Mar 06 18:00:10 nexusone Mar 06 18:01:12 let me know if the two dialer programs work for you Mar 06 18:01:45 I've an old image Mar 06 18:01:47 I should update Mar 06 18:01:54 you just built? Mar 06 18:04:07 it doesn't anymore Mar 06 18:04:40 altough it seem to call Mar 06 18:04:49 but nothing is displayed right after Mar 06 18:05:47 GNUtoo|laptop: here: either it timeout, close, or show error. in no case something is visible in log so something is fishy Mar 06 18:05:57 GNUtoo|laptop: since it worked with mdbus2 as you know Mar 06 18:06:36 yes Mar 06 18:06:45 maybe I'll try to opkg upgrade Mar 06 18:07:33 look at /var/log/phonefsod.log Mar 06 18:07:37 not promizing at all Mar 06 18:08:16 it segfaults Mar 06 18:08:21 (phoneuid Mar 06 18:08:22 ) Mar 06 18:09:36 http://www.pastie.org/1640054 Mar 06 18:10:00 <[Rui]> phoneuid segfaults with what? Mar 06 18:10:15 when you call Mar 06 18:10:18 on qsd devices Mar 06 18:10:29 basically I open dialer Mar 06 18:10:30 I do Mar 06 18:10:31 <[Rui]> oh :( Mar 06 18:10:32 4242 Mar 06 18:10:38 I press call Mar 06 18:10:46 and no call screen appear Mar 06 18:14:32 GNUtoo|laptop: ok glad you have same problem Mar 06 18:14:52 GNUtoo|laptop: I applied changes locally is it ok to do a second patch so it will be two commits ? Mar 06 18:14:55 I'll build a new n900 image Mar 06 18:15:01 and opkg update;opkg upgrade Mar 06 18:15:12 ? Mar 06 18:15:17 just resend the full patch Mar 06 18:15:29 how ? I commited the first one locally already Mar 06 18:15:35 git add ./ Mar 06 18:15:39 git commit --amend -s Mar 06 18:16:01