**** BEGIN LOGGING AT Mon Jun 20 02:59:57 2011 Jun 20 07:01:11 Good day all , how to set password for lock screen in SHR ? Jun 20 07:27:40 Moin all Jun 20 07:28:08 PaulFertser: I went to a GSM shop/repair shop. The man behind the counter physically drew back when I showed him the phone. Jun 20 07:28:17 ChristW: LOL Jun 20 07:28:25 ChristW: what did you try to ask him? Jun 20 07:28:28 "I've never opened one like that before". "I can do that for you..." "no, no!" Jun 20 07:28:51 I tried asking him to fix the earpiece (and AUX button while he was at it) Jun 20 07:29:06 ChristW: for educational purposes i've asked some local repairmen around here in moscow, showed an opened FR to them. They had no hesitations at all. Jun 20 07:29:33 ChristW: good idea, I should go and ask some repair shops about this just for fun : Jun 20 07:30:09 ChristW: i asked them how much would be to do change one 0402 R and to solder a cap (for the buzzfix), they said it depends on the client as the work is neglegtible ("you know it for yourself, that's not a real work, you can ask 30EUR for that or if the client is really nice, 15") Jun 20 07:30:40 In the end, I bought myself a base-line Nokia (for EUR40...) so that I am reachable at the moment. Now I need to wait for the GTA04. Jun 20 07:31:09 EUR40 is prbably close to the cost for fixing my FR, so... Jun 20 07:31:37 Btw, Nokia 1100 is just awesome. Sturdy as a brick and works for a week (probably more) from BL-6C. Jun 20 07:32:10 So, in Soviet Russia, opened phones don't scare a repair-man ;-) Jun 20 07:32:52 ChristW: they do BGA reballing regularly, sometimes with inappropriate heatguns even; it's hard to scare them. Jun 20 07:33:17 lindi-_: hey :) Jun 20 07:33:55 I got a Nokia 1280. They said that it wasn't even available in .nl yet. I wonder where they got it, then... Jun 20 07:47:02 PaulFertser: hi Jun 20 08:57:40 Good day all , how to set password for lock screen in SHR ? Jun 20 09:35:47 freesmartphone.org: 03morphis 07aurora * r8787e88b1972 10/aurora/systemmanager/controller.vala: aurora: don't set busy when power key is pressed as this is already done by fsodeviced Jun 20 09:35:47 freesmartphone.org: 03morphis 07aurora * r41e1a40e682a 10/aurora/components/common/ (BaseHub.qml Dialpad.qml): aurora: cancel tap on element when signal arrives and restore the correct state Jun 20 09:35:48 freesmartphone.org: 03morphis 07aurora * r18a77c1eab0b 10/aurora/components/common/BaseHub.qml: aurora: refactor base hub component to use states instead of property change signals Jun 20 09:51:50 wow, ding is weird: searching for neglectable it shows negligible, but not a single mentioning of neglectable in that record Jun 20 13:11:59 someone can help mùe to fix this ? http://pastebin.com/raw.php?i=ZB2AZtKE I don't want to remove my tmp directory Jun 20 13:14:27 GarthPS: does ``bitbake -c clean libphone-utils0'' help? Jun 20 13:14:38 PaulFertser: nope Jun 20 13:14:53 GarthPS: what version does it build then? Jun 20 13:15:07 PaulFertser: it rebuild the same package and as the dependencie definition does not change.. Jun 20 13:15:39 GarthPS: i remember struggling with similar messages. Jun 20 13:15:55 GarthPS: but what version does it build for you now? Jun 20 13:16:49 PaulFertser: waht is wierd is that it build libphone-utils0_0.0.2+gitr0+781d866bc12eec293007851fe3c300d0f5a301d3-r2.6_armv7a.ipk Jun 20 13:17:09 so I even don't understand that.. Jun 20 13:17:44 for the other dependencie it is different as it is below the git rev Jun 20 13:19:09 GarthPS: gitr0 and gitr0 are the same revisions, you can't sort it out by just git hash i guess. Jun 20 13:19:45 PaulFertser: but the dep is >= so ... Jun 20 13:20:18 so we have 0.0.2+gitr0 >= 0.0.2+gitr0 Jun 20 13:20:25 so this should be ok Jun 20 13:20:54 Sounds like it... I'd still try removing/altering the dep in task-shr-minimal-fso. Jun 20 13:21:24 Hm, last time i used OE was in Jan, looks like i've forgotten all of the needed magic by now :( Jun 20 13:29:48 GNUtoo, hi :) Jun 20 13:30:58 hi Jun 20 13:31:17 GNUtoo, it seems enjoy patch was acked but no one pushed it to OE. Jun 20 13:31:23 ok Jun 20 13:31:45 ping me later for it Jun 20 13:32:16 GNUtoo, and fyi you can now manage offline devices with emtooth (rev150) :) Jun 20 13:32:35 you can find screens at scap.linuxtogo Jun 20 13:33:25 ok nice Jun 20 13:34:30 PaulFertser: :) thx anyway. I hope to find how to modify this.. Jun 20 15:12:02 hmm do I need to do something specific if I wanna use a GPLv2 icon from someone else in my app? Jun 20 15:14:04 strange license for an icon Jun 20 15:15:13 hmmm Jun 20 15:15:26 I think you need to include a copy of the gplv2 in your app Jun 20 15:15:34 and also credit the author Jun 20 15:15:48 (== telling who the author is) Jun 20 16:50:30 http://scap.linuxtogo.org/files/126390dac225248c90ba0a9575389e03.png Jun 20 16:53:48 does someone know where depencies are defined ? like this Cannot satisfy the following dependencies for task-shr-minimal-fso: Jun 20 16:53:48 | * libphone-utils0 (>= 0.0.2+gitr0+d3f510d75f76d6d03c53b3376ce1aba1c88062e7) Jun 20 16:59:19 GarthPS, in corresponding recipe in OE Jun 20 17:01:35 pespin: yes but no, here it is "virtual" (don't know if it is the good calling) target like task-shr-minimal-fso. or at least I don't find it Jun 20 17:02:02 GarthPS, yeah, I was looking at it now and can't find it neither xD Jun 20 17:02:06 pespin: for me it is dynamicaly created Jun 20 17:02:25 pespin: task-shr-minimal-fso is define in shr-image.bb Jun 20 17:05:00 pespin: hmm I need to find where task-shr-minimal-fso is define becaus ein the shr-image recipe it is not defined in fact Jun 20 17:05:39 GarthPS, recipes $ grep -r task-shr-minimal-fso * Jun 20 17:05:46 didn't show anything apart from shr-image Jun 20 17:06:08 pespin: hmm in recipe/task Jun 20 17:06:12 pespin: hmm in recipe/tasks Jun 20 17:08:23 GarthPS, http://cgit.openembedded.org/cgit.cgi/openembedded/tree/recipes/tasks/task-shr-minimal.bb?id=a5678078ef4196a8b53c99c6e466553907f0378d Jun 20 17:10:42 pespin: yeah but it is not this one I think , we are missing the -fso part Jun 20 17:10:59 GarthPS, it's inside ;) Jun 20 17:11:49 RDEPENDS_${PN}-fso = "\ Jun 20 17:11:54 pespin: hmm yeah.. right.. but I don't understand completelly then Jun 20 17:12:43 GarthPS, that errors is from bitbake right? Jun 20 17:12:53 pespin: yes Jun 20 17:14:18 GarthPS, are you using old oe or meta-oe? Jun 20 17:14:26 oe-core Jun 20 17:14:55 pespin: old oe Jun 20 17:15:19 pespin: I hope I do'nt need to rm tmp/ dir again.. :) Jun 20 17:15:53 hmm then I don't understand because RDEPENDS doesn't seem to need libphone (afair this one is from shr apps) Jun 20 17:18:41 pespin: yeah me too... Jun 20 17:20:08 pespin: grrr I think I am good for a rm tmp dir.. Jun 20 17:20:31 yep :P Jun 20 17:41:00 pespin: I am wondering if I just remove my tmp dir or if I switch the shr chroot Jun 20 17:41:16 pespin: do you have arguments about this ? Jun 20 17:42:21 GarthPS, switch the shr chroot? Jun 20 17:43:05 pespin: s/switch the/switch to Jun 20 17:43:09 I'd say rm tmp; make setup-shr-unstable; make update Jun 20 17:43:16 FR accelerometers in 2.6.39 doesnt work... Jun 20 17:43:33 GarthPS, ah, yeah, I think shrchroot is nice, you should move to using it :) Jun 20 17:43:48 pespin: for you why ? Jun 20 17:50:54 GarthPS, because if ou have some OS specific problem, then other people have it too, and it's easier that someone else with more OE knowledge can fix it earlier Jun 20 17:51:23 you will have less OS specific problems Jun 20 17:52:02 apart from that, the makefile configures many things for you, so it's nice for lazy people like me :P Jun 20 17:54:02 pespin: ok anyway I could try it throw away my current dir later :) Jun 20 17:54:08 thx Jun 20 17:55:55 np :) Jun 20 17:58:15 is "echo lis3lv02d_spi > /sys/bus/spi/drivers/lis3lv02d_spi/bind" right way to power-on accels in .39? Jun 20 17:58:29 modules lis3lv02d lis3lv02d_spi are loaded Jun 20 17:59:00 but no /dev/input/event3 Jun 20 18:13:39 lindi-: please, can you help? Jun 20 18:26:25 Martix: does .39 work for you on FR? Jun 20 18:26:44 yes, it boots Jun 20 18:26:46 Martix: I couldn't get 2.6.37 to boot from SD Jun 20 18:26:55 I am testing my new Navigation board Jun 20 18:26:59 Martix: are you using SD? Jun 20 18:27:16 and boots from uSD with lower SD clock Jun 20 18:31:24 GNUtoo: Hi Jun 20 18:53:59 heyho Jun 20 18:54:10 hey morphis Jun 20 18:54:40 angelox, hi Jun 20 18:54:42 hi morphis Jun 20 18:56:06 GNUtoo: would you have time to help me to boot SHR on n900 ? i'm too curious about running it :) Jun 20 18:56:16 morphis, do you have 24/32bit in your palm pre Jun 20 18:56:17 yes Jun 20 18:56:53 GNUtoo: don't know, how do I check? Jun 20 18:56:53 angelox, what's the current state of your n900? Jun 20 18:57:04 morphis, try to enable compositing Jun 20 18:57:08 in enlightenement Jun 20 18:57:44 it's in Jun 20 18:57:58 wrench->extensions->modules Jun 20 18:58:07 GNUtoo: will try that Jun 20 18:58:10 and then look->composite Jun 20 18:58:15 that would give us compositing Jun 20 18:58:17 but currently I don't have e17 installed Jun 20 18:58:19 software compositing Jun 20 18:58:22 ok Jun 20 18:58:23 an never mind then Jun 20 18:58:26 sounds like a nice feature Jun 20 18:58:30 how is aurora? Jun 20 18:58:30 but GarthPS can try Jun 20 18:58:35 ok Jun 20 18:58:35 it proceeds Jun 20 18:58:41 I could also try on my bug20] Jun 20 18:58:45 s/]// Jun 20 18:58:45 GNUtoo meant: I could also try on my bug20 Jun 20 18:58:50 I am currently fighting against fsousaged Jun 20 18:58:57 I've a hard time making it work on the n900 Jun 20 18:58:59 ok Jun 20 18:59:01 it hangs when running the lowlevel suspend Jun 20 18:59:08 ah? Jun 20 18:59:13 do you have more details? Jun 20 18:59:27 it does write("/sys/power/state/", "mem") Jun 20 18:59:28 I know a bit the android plugin Jun 20 18:59:31 and there it hangs Jun 20 18:59:47 if I kill fsouaged the device suspend Jun 20 18:59:49 and when you resume it's hanged? Jun 20 18:59:52 ah ok Jun 20 19:00:02 and then it comes back as normal Jun 20 19:00:02 does it do the same on om-gta02? Jun 20 19:00:29 it's a palm specific problem I think as there is a own lowlevel implementation for it Jun 20 19:00:43 (sorry interrupt conversation between GNUtoo<->morphis) GNUtoo: My N900 it's without any secondary bootloader (u-boot,menuboot-n900). Jun 20 19:00:46 yes I know there is a palm low_level Jun 20 19:01:00 but I wondered if it was like a dbus problem or similar Jun 20 19:01:06 there were such issues in the past Jun 20 19:01:16 where you click on shut-down on gta02 Jun 20 19:01:20 and it didn't shut down Jun 20 19:01:23 but dbus timeout Jun 20 19:01:29 and then the second time it worked Jun 20 19:01:41 GNUtoo: it does not seem to be a dbus problem Jun 20 19:01:49 angelox, so you have uboot Jun 20 19:01:50 ok Jun 20 19:01:53 hmmmm Jun 20 19:01:53 GNUtoo: when I am doing now a simple "echo "mem" > /sys/power/state" it hangs too Jun 20 19:02:06 ouch Jun 20 19:02:16 how does palm suspend then? Jun 20 19:02:20 strace could help Jun 20 19:04:32 it work sometimes ago Jun 20 19:04:42 ah ok Jun 20 19:04:47 kernel issues? Jun 20 19:04:51 dmesg shows something Jun 20 19:04:53 add hang task Jun 20 19:05:00 in kernel hacking Jun 20 19:05:04 and look what is hanged Jun 20 19:05:45 basically you have to wait like some minutes by default Jun 20 19:05:50 but then there is a message Jun 20 19:05:54 with the trace Jun 20 19:05:55 ok Jun 20 19:05:56 will try Jun 20 19:06:06 and also with the sys node where you define the timeout Jun 20 19:07:50 hm Jun 20 19:07:56 there seems to be some kernel crash Jun 20 19:08:10 after doing the suspend manually the device comes back Jun 20 19:08:19 I am back on console then Jun 20 19:08:25 but after some seconds it crashes Jun 20 19:08:52 ok Jun 20 19:10:33 GNUtoo: ok,u-boot installed...what should i do now? Jun 20 19:11:05 try the command run shr Jun 20 19:11:08 if it doesn't work Jun 20 19:11:27 GNUtoo: on webOS it works without any problems Jun 20 19:11:28 try to look at what /dev/mmcblkNp1 it uses Jun 20 19:11:33 ok Jun 20 19:12:57 GNUtoo: i've installed it (again) right now,and i didn't make anything else :\ because i haven't found any tutorial or anything like Jun 20 19:13:54 what uboot did you run? Jun 20 19:14:01 *flash or boot Jun 20 19:14:25 http://www.shr-project.org/trac/wiki/Devices/NokiaN900/InstallGuide Jun 20 19:14:39 get a mmcblk0p1 version Jun 20 19:14:55 GNUtoo: you are using the devshell very too, right? Jun 20 19:15:03 s/very/very often/ Jun 20 19:15:03 morphis meant: GNUtoo: you are using the devshell very often too, right? Jun 20 19:15:24 morphis, yes very very often Jun 20 19:15:44 morphis, I've huge issues with oe-core btw Jun 20 19:15:48 I cannot compile it Jun 20 19:15:54 every time it fails with a new error Jun 20 19:16:20 GNUtoo: i'm using u-boot from maemo extras-devel (uboot-pr13). Checking Guide... Jun 20 19:16:59 angelox, use shr's uboot Jun 20 19:18:18 else I can do a video of SHR booting with the kexecboot but I must push it into oe Jun 20 19:18:57 GNUtoo: ok,using shr's uboot i'll can boot maemo? Jun 20 19:19:10 I think so Jun 20 19:19:16 if it doesn't work reflash maemo Jun 20 19:19:19 's kernel Jun 20 19:19:27 anyway to use uboot Jun 20 19:19:30 you must do that Jun 20 19:19:41 download the maemo kernel Jun 20 19:19:45 combine it with uboot Jun 20 19:19:49 and flash the combined image Jun 20 19:20:07 using that guide isn't ? Jun 20 19:20:47 yes Jun 20 19:20:52 but adapt it to your kernel Jun 20 19:21:00 what kernel do you use with maemo? Jun 20 19:21:04 the power kernel? Jun 20 19:21:35 default one Jun 20 19:21:42 ok Jun 20 19:21:52 then install the image of the default one Jun 20 19:21:58 with apt-get Jun 20 19:22:02 or wget it Jun 20 19:22:09 you are under PR 1.2 or 1.3? Jun 20 19:22:52 let me check Jun 20 19:23:48 i don't know :( It says to me (Version: 20.2010.36-2.210.2) Jun 20 19:24:11 * angelox just remembers,he's newbie in maemo and meego and n900 stuff Jun 20 19:24:13 GNUtoo: with a plain console-image no problems anymore ... Jun 20 19:24:23 hmmmm Jun 20 19:24:41 maybe omapfb kernel driver or something like that? Jun 20 19:24:44 what about that: Jun 20 19:24:46 chvt 1 Jun 20 19:24:53 //suspend Jun 20 19:25:06 chvt $(the_normal_one) Jun 20 19:25:48 angelox, in other words there is a maemo update Jun 20 19:25:52 named PR 1.3 Jun 20 19:26:03 you have to reflash everything to install it Jun 20 19:26:21 so maybe better doing it early Jun 20 19:26:28 not when you have tons of data on it Jun 20 19:27:15 so i use PR 1.2 ? Jun 20 19:27:47 no idea Jun 20 19:27:48 anyway Jun 20 19:27:52 get your kernel image Jun 20 19:28:02 try to apt-cache search it Jun 20 19:28:06 and apt-get install it Jun 20 19:31:07 apt-get install kernel ? i did it sometime ago Jun 20 19:31:40 let me boot in maemo Jun 20 19:31:53 I help you, but in exchange try to update the wiki Jun 20 19:31:56 GNUtoo: hm ok, installing fsouaged in console image and using it for the suspend works too Jun 20 19:32:15 let's try with a used fb Jun 20 19:32:17 morphis, can you chvt to a console? Jun 20 19:32:32 yes Jun 20 19:32:46 GNUtoo: ok Jun 20 19:32:55 morphis, ok good Jun 20 19:36:30 try to add it in the booting article if you can Jun 20 19:36:40 http://www.shr-project.org/trac/wiki/Devices/NokiaN900/Booting Jun 20 19:36:53 anyway my battery is low Jun 20 19:37:11 so I guess maemo is trying to charge it and prevent me to boot yet Jun 20 19:38:46 my howto with kexec is way easier Jun 20 19:38:52 but it add 1 minute to the boot time Jun 20 19:39:06 anyway booting on n900 isn't great at the moment Jun 20 19:39:13 everybody worked on other stuff Jun 20 19:39:22 so that's why I worked on kexecboot Jun 20 19:43:11 ok booted Jun 20 19:43:27 I put a microsd in and it booted Jun 20 19:43:29 strange Jun 20 19:43:30 anyway Jun 20 19:43:44 hmm Jun 20 19:44:21 I meant that it wasn't booting until maemo with kexecboot before without microsd Jun 20 19:46:06 let me ask a thing Jun 20 19:46:49 kexecboot adds a 1 minute of wait to boot shr..for that time,it drains my battery? Jun 20 19:47:59 i mean,like leaving phone in uboot Jun 20 19:48:18 s/leaving/if i leave/ Jun 20 19:48:19 angelox meant: i mean,like if i leave phone in uboot Jun 20 19:51:13 yes Jun 20 19:51:51 look in /boot Jun 20 19:51:56 you should have something like Jun 20 19:52:01 zImage-2.6.28-maemo19.fiasco Jun 20 19:52:04 extract it Jun 20 19:52:12 with 0xFFFF or flasher Jun 20 19:52:19 and you'll have a zImage Jun 20 19:52:32 transform it into an uImage Jun 20 19:53:04 strange.. Jun 20 19:53:20 nothing in /boot... Jun 20 19:53:21 combine it with uboot Jun 20 19:53:23 and flash it Jun 20 19:53:31 then install kernel-maemo Jun 20 19:53:36 apt-get install kernel-maemo Jun 20 19:53:40 and while you do things Jun 20 19:53:46 don't forget to update the wiki Jun 20 19:54:09 ok Jun 20 19:54:53 i added kexecboot procedure from http://www.shr-project.org/trac/wiki/Devices/NokiaN900/Booting into the wiki too,that's ok? Jun 20 19:56:22 add the thing we're doing together Jun 20 19:56:27 that is to say u-boot Jun 20 19:56:37 while you try stuff Jun 20 19:56:41 write it on the wiki Jun 20 19:56:45 s/try/do/ Jun 20 19:57:12 ok...added "If you don't have anything on /boot,run apt-get install kernel-maemo" Jun 20 19:57:18 yes Jun 20 19:58:27 or I could write it and you fill the commands inside Jun 20 19:58:30 *fill in Jun 20 19:59:25 to combine uboot to kernel i should have the kernel on pc? Jun 20 20:01:02 you should follow that howto: Jun 20 20:01:13 http://www.shr-project.org/trac/wiki/Devices/NokiaN900/InstallGuide#Installation Jun 20 20:02:36 GNUtoo: it seems to be a problem with the used omapfb Jun 20 20:03:35 ok Jun 20 20:03:40 GNUtoo: If I have aurora running (which uses the framebuffer) Jun 20 20:03:50 the "echo mem > ...." does not complete Jun 20 20:03:59 if I kill aurora then it works fine again Jun 20 20:05:05 http://www.shr-project.org/trac/wiki/Devices/NokiaN900/Booting?version=32#u-bootdual-bootinstallationforthestandardmaemokernel Jun 20 20:05:10 bbvs Jun 20 20:05:17 (be back very soon) Jun 20 20:10:33 angelox, yes Jun 20 20:10:41 angelox, http://www.shr-project.org/trac/wiki/Devices/NokiaN900/Booting?version=32#u-bootdual-bootinstallationforthestandardmaemokernel Jun 20 20:11:53 GNUtoo: i can't find how to extract zImage from Fiasco with 0xFFFF,only with Flasher,so i can't write on that guide... Jun 20 20:12:05 let me look Jun 20 20:12:24 -u [fiasco] unpack target fiasco image Jun 20 20:12:27 from: Jun 20 20:12:32 ./0xFFFF -h Jun 20 20:13:01 ok,let me download it Jun 20 20:13:38 s/it/0xFFFF/ Jun 20 20:13:38 angelox meant: ok,let me download 0xFFFF Jun 20 20:13:44 ok Jun 20 20:13:53 let me find the dowload hg repo Jun 20 20:14:38 found here: http://www.nopcode.org/0xFFFF/?p=down don't know if works fine,or if it's the same as you use Jun 20 20:15:09 hg clone http://hg.youterm.com/0xFFFF/ Jun 20 20:15:18 I use the lastest one Jun 20 20:15:22 you need the lastest one Jun 20 20:16:22 ouch...hg not installed..installing Jun 20 20:16:35 s/hg/mercurial/ Jun 20 20:16:35 angelox meant: ouch...mercurial not installed..installing Jun 20 20:18:06 http://www.shr-project.org/trac/wiki/Devices/NokiaN900/Booting?version=34#a0xFFFFinstallation Jun 20 20:21:16 http://www.shr-project.org/trac/wiki/Devices/NokiaN900/Booting?version=35 Jun 20 20:22:39 ok Jun 20 20:27:20 GNUtoo: 0xFFFF generated from my zImage a file named kernel-2.6.28-maemo22,it wouldn't be called zImage****** ? Jun 20 20:27:54 it's not an issue Jun 20 20:27:56 it's a zImage Jun 20 20:28:23 ok... Jun 20 20:31:07 GNUtoo: ok, it's definitly the way qt4e uses the framebuffer Jun 20 20:31:16 if I use the directfb backend Jun 20 20:31:18 it works fine Jun 20 20:32:40 so we will stay at the directfb backend for now Jun 20 20:34:34 GNUtoo: combined it,how should my phone be to test flash? turned off or turned on? Jun 20 20:36:32 reading Jun 20 20:36:54 morphis, directfb from stock oe, or from palm? Jun 20 20:37:16 angelox, turn the phone off Jun 20 20:37:17 GNUtoo: from stock oe Jun 20 20:37:25 and connect an usb cable from the phone to the computer Jun 20 20:37:32 and run 0xFFFF like this: Jun 20 20:37:41 sudo su Jun 20 20:37:54 ./0xFFFF -pkernel%/path/to/combined/image Jun 20 20:38:54 ./0xFFFF -p/my/path/combined.bin or ./0xFFFF -pkernel%/my/path/combined.bin ? Jun 20 20:40:26 * angelox says sorry,he didn't understand Jun 20 20:46:22 GNUtoo: and,that's suspect?on guide you put kernel-2.6.28-maemo42 but my one is kernel-2.6.28-maemo22 Jun 20 20:46:47 I put under that: Jun 20 20:46:52 u-boot dual-boot installation for the kernel power maemo kernel Jun 20 20:47:01 the important part is that one: Jun 20 20:47:07 "for the kernel power maemo kernel" Jun 20 20:47:21 the kernel power is a kernel that add a lot of features Jun 20 20:47:32 like for instance kexec capability Jun 20 20:47:58 or overclocking(don't do it, not enabled by default(the settings disables it) ) Jun 20 20:48:18 or ad-hoc that doesn't work well Jun 20 20:48:21 or usb host that is nice Jun 20 20:48:29 hmm Jun 20 20:48:37 and about my last question? Jun 20 20:48:55 sorry,i'm a bit confused,is ./0xFFFF -p/my/path/combined.bin or ./0xFFFF -pkernel%/my/path/combined.bin ? Jun 20 20:49:35 -pkernel%/my/path/combined.bin Jun 20 20:49:45 sorry I missed that question Jun 20 20:49:57 ok,thank you Jun 20 20:50:22 * angelox needs luck now :\ Jun 20 20:50:43 * GNUtoo is out of luck: Jun 20 20:50:49 $ python builder.py Jun 20 20:50:55 kernel is too big Jun 20 20:51:12 with that the line before: 0x2b74c 0x1c38d4 Jun 20 20:51:39 i got 0x2b754 0x1befc0 Jun 20 20:51:53 that's ok? Jun 20 20:52:33 GNUtoo: ah,another question: should i manage something about watchdogs? Jun 20 20:53:16 hm maybe we will get a kernel update for the Palm Pre .. Jun 20 20:53:21 to 2.6.29 ... Jun 20 20:54:03 angelox, yes Jun 20 20:54:12 ./0xFFFF -f 0x06 ? Jun 20 20:54:13 angelox, you should disable them for shr first boot Jun 20 20:54:15 yes Jun 20 20:54:22 then re-enable them if you want Jun 20 20:54:38 but for flash i need disable? Jun 20 20:55:30 just for booting shr at first boot Jun 20 20:55:43 or if the boot is too long(for instance with kexecboot) Jun 20 20:56:00 oh,i disabled by accident..there's a problem? Jun 20 20:56:10 no Jun 20 20:56:17 yeah Palm release the sources for webos 2.1.1 and 2.1.2! Jun 20 20:56:19 it can be re-enabled or re-disabled at will Jun 20 20:56:33 ok,flashing Jun 20 20:56:58 2.6.29....nice Jun 20 20:57:24 btw no news about our palm-pre-2? Jun 20 20:57:56 oh,that's a fast flash,i never thought Jun 20 20:59:44 for me it's slow since I've usb issue on my desktop Jun 20 20:59:49 *slower Jun 20 21:00:26 maemo not booting... Jun 20 21:01:16 what should i do GNUtoo? Jun 20 21:01:37 ok Jun 20 21:01:57 what do you get instead? how did you try to boot maemo? Jun 20 21:02:28 stopped auto boot..and typed: run maemo Jun 20 21:02:34 ok Jun 20 21:02:37 hmmm Jun 20 21:02:51 do you want to try kexecboot? Jun 20 21:02:52 i was with a meego image iirc on my mmc,it started to boot it... Jun 20 21:03:15 what options there was with uboot Jun 20 21:03:18 only boot maemo? Jun 20 21:03:38 sercon,usbcon,vgacon,shr,shr2,p2,maemo Jun 20 21:03:45 ok Jun 20 21:03:49 so maemo was the right thing Jun 20 21:03:59 should i wait? it boot? Jun 20 21:04:07 mrmoku|italy, is on hollidays and JaMa too Jun 20 21:04:15 if you want to try kexecboot I can help Jun 20 21:04:42 GNUtoo: if you want to take a look: http://git.freesmartphone.org/?p=linux-2.6.git;a=shortlog;h=refs/heads/palm/webos-2.1.2 Jun 20 21:04:53 GNUtoo: but it will drain all my battery on the 1 minute delay isn't ? Jun 20 21:05:09 msm??? Jun 20 21:05:15 it's the kenrel for the msm devices? Jun 20 21:05:58 yes Jun 20 21:06:06 ok GNUtoo: let's try kexecboot Jun 20 21:06:15 looks like one from codeaudora Jun 20 21:06:17 angelox, ok, yes it can drain your battery Jun 20 21:06:25 so pretty common msm source Jun 20 21:06:33 angelox, ok let me compile a kexecboot image Jun 20 21:07:23 GNUtoo: while that,could i flash my kernel (without uboot) again to boot maemo? should i use uImage generated or zImage got from /boot ? Jun 20 21:07:26 morphis, I'll look after helping anarsoul Jun 20 21:07:27 oops Jun 20 21:07:35 s/ anarsoul / angelox / Jun 20 21:07:50 angelox, do that: Jun 20 21:08:21 ./0xFFFF -F zImage-2.6.28-maemo**.fiasco Jun 20 21:09:14 ok Jun 20 21:09:15 morphis, any news from the palm pre 2? Jun 20 21:10:15 GNUtoo: no Jun 20 21:10:20 GNUtoo: no initfs \o/ Jun 20 21:10:32 angelox, ah? not an issue I guess Jun 20 21:10:40 it can't boot... Jun 20 21:10:50 hmmm Jun 20 21:10:52 go into a reboot loop after flashed Jun 20 21:10:58 showing that Jun 20 21:11:00 ok Jun 20 21:11:12 how did you flash it exactly? Jun 20 21:11:27 0xFFFF -F zImage-2.6.28-maemo22.fiasco Jun 20 21:11:33 ok Jun 20 21:11:49 wouldn't be -pkernel%/zImage***** ? Jun 20 21:11:55 no Jun 20 21:11:59 wait a sec Jun 20 21:12:08 let me think at the easiest way Jun 20 21:12:15 ok Jun 20 21:12:17 to prevent reflashing everything Jun 20 21:12:17 thanks Jun 20 21:12:26 oh ouch Jun 20 21:12:58 wget http://repository.maemo.org/extras/pool/fremantle/free/k/kernel-maemo/kernel-maemo_2.6.28-maemo19_armel.deb Jun 20 21:13:06 ar x kernel-maemo_2.6.28-maemo19_armel.deb Jun 20 21:13:39 tar -xvf data.tar.gz ? Jun 20 21:13:53 yes but add a z Jun 20 21:14:10 and flash that fiasco image Jun 20 21:14:17 xvf auto detects the extension on some versions Jun 20 21:14:22 ah ok Jun 20 21:14:30 0xFFFF -F boot/zImage-2.6.28-maemo19.fiasco ? Jun 20 21:14:33 yes Jun 20 21:14:35 try that Jun 20 21:14:39 ok Jun 20 21:14:42 but add a -R at the end Jun 20 21:14:46 else it flashes Jun 20 21:14:49 and does not reboot Jun 20 21:14:53 and you're stuck Jun 20 21:14:57 and before flashing Jun 20 21:15:00 try -R alone Jun 20 21:15:09 0xFFFF -R boot/zImage-2.6.28-maemo19.fiasco ? Jun 20 21:15:14 no Jun 20 21:15:18 ./0xFFFF -R Jun 20 21:15:19 alone Jun 20 21:15:25 hmm ok Jun 20 21:15:30 because maybe it's stuck in the booloader Jun 20 21:15:46 so I am off Jun 20 21:15:47 bye Jun 20 21:15:50 ok Jun 20 21:15:53 same Jun 20 21:15:55 bye morphis Jun 20 21:16:05 try flash? Jun 20 21:16:07 then flash that newer fiasco Jun 20 21:16:09 with Jun 20 21:16:19 ./0xFFFF -pkernel%boot/zImage-2.6.28-maemo19.fiasco -R Jun 20 21:16:26 ok Jun 20 21:17:44 hmm... Jun 20 21:18:03 remains on the nokia splash Jun 20 21:18:19 like it were in maintenance mode Jun 20 21:18:33 ok Jun 20 21:18:55 then maybe flash the PR 1.3 Jun 20 21:19:17 could i try flash my old kernel from /boot with -pkernel% parameter ? Jun 20 21:19:24 yes Jun 20 21:19:38 ok Jun 20 21:19:39 extract it from the fiasco image first tough Jun 20 21:19:47 ? Jun 20 21:20:06 use my zImage extracted from it? Jun 20 21:20:10 yes Jun 20 21:20:12 ok Jun 20 21:20:15 oops Jun 20 21:20:16 sorry Jun 20 21:20:18 wait a sec Jun 20 21:20:21 I did a mistake Jun 20 21:20:28 ./0xFFFF -pkernel%boot/zImage-2.6.28-maemo19.fiasco -R Jun 20 21:20:31 that was wrong Jun 20 21:20:42 I should have told that instead: Jun 20 21:20:56 ./0xFFFF -F boot/zImage-2.6.28-maemo19.fiasco -R Jun 20 21:20:59 retry that Jun 20 21:21:02 sorry Jun 20 21:21:06 ok Jun 20 21:21:07 np Jun 20 21:21:31 anyway http://tablets-dev.nokia.com/nokia_N900.php has PR 1.3 Jun 20 21:21:59 -F is for kernel fiasco images Jun 20 21:22:03 no initfs... Jun 20 21:22:07 and -pkernel is for zImages Jun 20 21:22:18 for flashing PR 1.3 you need to unpack the pieces Jun 20 21:22:19 hmm Jun 20 21:22:21 with: Jun 20 21:22:44 ./0xFFFF -u the_pr_1.3_image Jun 20 21:22:52 or to use flasher Jun 20 21:23:04 flasher is proprietary Jun 20 21:23:51 i got a lot of files on that page Jun 20 21:24:17 i'll use this: PR 1.3 version 20.2010.36-2 Latest Maemo 5 Global release for Nokia N900 OK? Jun 20 21:24:58 let me look Jun 20 21:25:29 yes Jun 20 21:25:38 download that Jun 20 21:25:47 but don't flash it yet Jun 20 21:25:57 how should i flash? Jun 20 21:26:13 oh no Jun 20 21:26:16 the safest way would be to use flasher Jun 20 21:26:17 ? Jun 20 21:26:33 45 kB/s download Jun 20 21:26:52 ouch Jun 20 21:29:05 UK one version is downloading more fast,can i use it? Jun 20 21:30:22 GNUtoo: Would you have any other idea to fix it without need reflash all? Jun 20 21:31:15 I'll be back very soon Jun 20 21:31:19 also ask #maemo Jun 20 21:52:25 bad internet Jun 20 21:52:40 GNUtoo: ping Jun 20 21:52:47 pong Jun 20 21:53:00 GNUtoo: downloaded UK version,how should i flash? Jun 20 21:53:09 http://wiki.maemo.org/Flashing Jun 20 21:53:21 but I don't know the difference with the US version Jun 20 21:53:34 so better waiting Jun 20 21:53:39 for the US version to download Jun 20 21:53:46 or ask in #maemo the difference Jun 20 21:53:52 maybe language? Jun 20 21:54:04 maybe hardware Jun 20 21:54:08 maybe bootloader Jun 20 21:54:10 and such things Jun 20 21:54:14 maybe radio firmware Jun 20 21:54:23 hmm Jun 20 21:54:26 maybe it'll make huge issues Jun 20 21:54:28 maybe not Jun 20 21:54:30 I cannot tell Jun 20 21:54:36 hmm Jun 20 21:55:48 I hope i didn't kill my phone Jun 20 21:56:13 I guess not, unless you already flashed UK Jun 20 21:57:05 Global one will work isn't ? Jun 20 21:57:25 I think so Jun 20 21:57:45 and can i flash with 0xFFFF ? Jun 20 21:57:53 flasher isn't working Jun 20 21:57:55 better flashing that with flasher Jun 20 21:57:56 ok Jun 20 21:58:05 then I'll try with 0xFFFF Jun 20 21:58:07 before Jun 20 22:04:32 GNUtoo: they said that there's no problem Jun 20 22:07:29 ok Jun 20 22:07:34 then you can do it Jun 20 22:08:21 but start downloading the global version just in case Jun 20 22:09:01 yes,downloading Jun 20 22:10:43 GNUtoo: should i run this: flasher-3.5 -F -f -R ? Jun 20 22:11:00 yes Jun 20 22:11:05 look here tough: Jun 20 22:11:10 http://wiki.maemo.org/Flashing Jun 20 22:11:28 ok,thanks.. Jun 20 22:11:30 yes that's what they say Jun 20 22:11:32 so do that Jun 20 22:11:40 * angelox needs a lot of luck now :( Jun 20 22:15:53 i'll reboot Jun 20 22:18:12 hmm... Unable to enumerate USB buses! Jun 20 22:18:47 angelox, then try 0xFFFF Jun 20 22:18:50 like that: Jun 20 22:19:46 ./0xFFFF -u RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin Jun 20 22:20:06 it'll extract a lot of pieces Jun 20 22:20:28 and flash the following: Jun 20 22:20:31 kernel Jun 20 22:20:33 rootfs Jun 20 22:20:35 that's all Jun 20 22:20:47 Cannot read 133273603 bytes Jun 20 22:20:51 ? Jun 20 22:21:06 that's a error? Jun 20 22:21:13 when i did the command Jun 20 22:21:19 ah? Jun 20 22:21:26 is it finished to download? Jun 20 22:21:42 for me it just worked on global version Jun 20 22:21:51 no,i still trying with UK Jun 20 22:24:11 retry then Jun 20 22:24:16 ok Jun 20 22:24:18 and make sure the UK: Jun 20 22:24:23 *has finished downloading Jun 20 22:24:29 *is intact Jun 20 22:24:44 because I've the global one and it works Jun 20 22:24:50 iirc it was a continued download... Jun 20 22:25:01 maybe that's the problem Jun 20 22:25:05 yes maybe Jun 20 22:25:11 md5sum it Jun 20 22:25:11 downloading global Jun 20 22:25:13 and compare Jun 20 22:25:18 ok Jun 20 22:25:44 b9f8690318a3be61767826d15b8c1784 RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin Jun 20 22:25:47 that is the global one Jun 20 22:26:25 hmm Jun 20 22:26:34 md5sum matches in uk Jun 20 22:27:09 GNUtoo: i will take a look to software compositing under palmpre2 but I think there will be issue as there are already some http://trac.shr-project.org/trac/ticket/1326 Jun 20 22:29:43 ok Jun 20 22:29:52 angelox, ? Jun 20 22:29:59 GNUtoo: downloading... Jun 20 22:30:05 ok Jun 20 22:30:22 My problem with Flasher is: Unable to enumerate USB buses! Jun 20 22:30:28 do you have some idea ? Jun 20 22:30:36 no, I don't have flasher installed Jun 20 22:30:46 when I need it I boot on a livecd Jun 20 22:30:59 not to contaminate my computer with proprietary softwaer Jun 20 22:31:05 I needed it only once Jun 20 22:31:08 to flash PR 1.3 Jun 20 22:31:14 :) Jun 20 22:32:13 there's somehow to disable rd mode via 0xFFFFFF Jun 20 22:32:14 ? Jun 20 22:32:33 yes Jun 20 22:32:40 with the flags I gave Jun 20 22:33:04 Sorry,i didn't see they.could you give me they again? Jun 20 22:34:06 ./0xFFFF -f 0x06 Jun 20 22:34:49 Ok,thanks Jun 20 22:36:08 0xFFFF will work fine or it's dangerous ? Jun 20 22:37:05 GNUtoo: Downloaded Global..let's flash Jun 20 22:37:14 * angelox needs a lot of luck Jun 20 22:38:11 it's dangerous if you use -F Jun 20 22:38:18 but not if you flash the pieces Jun 20 22:38:28 so flash kernel and rootfs only Jun 20 22:38:40 hmm Jun 20 22:38:50 got the error again Jun 20 22:39:50 GNUtoo: http://pastie.org/2098391 Jun 20 22:40:40 what error? Jun 20 22:40:51 at the finish of the log Jun 20 22:41:10 "Cannot read 133273603 bytes" Jun 20 22:41:11 ah Jun 20 22:41:14 I get it too Jun 20 22:41:16 anyway Jun 20 22:41:22 most of the stuff is extracted Jun 20 22:41:26 so flash rootfs and kernel Jun 20 22:41:33 how? Jun 20 22:42:11 flash the kernel as before: Jun 20 22:42:28 ./0xFFFF -pkernel%./kernel-2.6.28-20103103+0m5 Jun 20 22:42:35 then for the rootfs do: Jun 20 22:42:39 wait a minute Jun 20 22:42:44 don't flaws the rootfs Jun 20 22:42:47 just the kernel Jun 20 22:42:49 and reboot Jun 20 22:42:55 no wait Jun 20 22:43:04 sorry I'm very tired Jun 20 22:43:05 anyway Jun 20 22:43:12 for flashing the rootfs do: Jun 20 22:43:20 flashed the kernel...reboot? Jun 20 22:43:27 ./0xFFFF -prootfs%./rootfs-RX-51_2009SE_20.2010.36-2_PR_MR0 Jun 20 22:43:28 no Jun 20 22:43:35 since you got PR 1.2 before Jun 20 22:43:39 so flash rootfs now Jun 20 22:43:45 and that you have PR 1.3 kernel Jun 20 22:43:45 and after flash reboot? Jun 20 22:43:50 it needs the kernel 1.3 modules Jun 20 22:43:53 so yes Jun 20 22:43:56 flash rootfs Jun 20 22:43:58 and reboot Jun 20 22:44:25 ok Jun 20 22:44:41 flashing... Jun 20 22:44:54 flashed Jun 20 22:45:13 no Jun 20 22:45:14 :( Jun 20 22:46:03 hmmm... Jun 20 22:47:06 let's wait,there are the balls circling... Jun 20 22:47:06 what happened? Jun 20 22:47:12 ah then it works Jun 20 22:47:20 i don't know,i must wait Jun 20 22:47:29 anyway,thank you so much!!!!! Jun 20 22:47:44 ok Jun 20 22:47:51 Yes worked!!!! Thank you :) Jun 20 22:48:18 i will reboot it to check if everything is ok Jun 20 22:48:20 next time we try kexecboot Jun 20 22:48:39 because well....uboot failed here Jun 20 22:48:44 i don't want to try again too early :) Jun 20 22:48:52 yes,kexecboot the best choice now Jun 20 22:48:52 ok Jun 20 22:49:29 oj Jun 20 22:49:30 oh Jun 20 22:49:51 everytime i powerup the phone it shows me that screen when you'll flash something Jun 20 22:49:56 and then it boots... Jun 20 22:50:40 ok Jun 20 22:50:44 what can be that ? Jun 20 22:50:53 then remove the flags Jun 20 22:51:38 ./0xFFFF -f 0x06 ? Jun 20 22:52:03 try 0x0 Jun 20 22:52:12 ok Jun 20 22:52:20 and pastebin the output Jun 20 22:52:46 ok Jun 20 22:53:29 GNUtoo-N900: http://pastie.org/2098428 Jun 20 22:54:58 ok Jun 20 22:55:03 looks fine Jun 20 22:55:11 reboot? Jun 20 22:55:15 yes Jun 20 22:55:23 ok Jun 20 22:56:14 GNUtoo-N900: no effect Jun 20 22:56:35 if you want,i can ask tomorrow,to you sleep :) Jun 20 22:56:40 ok Jun 20 22:56:55 maybe close the screen Jun 20 22:57:07 and reboot Jun 20 22:57:28 i didn't understand Jun 20 22:57:31 anyway that screen is not so important Jun 20 22:57:35 yes Jun 20 22:57:41 you get a keyboard Jun 20 22:57:50 that slides Jun 20 22:58:08 close it when you reboot Jun 20 22:58:34 each time i rebooted it was closed... Jun 20 22:59:25 ok Jun 20 22:59:28 btw Jun 20 23:00:03 the things written right after boot is the kernel Jun 20 23:00:16 like some numbers etc Jun 20 23:00:36 i got them too when kecec-ing maemo Jun 20 23:00:49 hmm Jun 20 23:01:38 i'd like to say too,about that screen that i said,it shows too "no initfs" then the screen disappears and it boot maemo Jun 20 23:03:26 i'll sleep Jun 20 23:03:29 bye Jun 20 23:03:35 ok,goodnight and thanks again Jun 20 23:03:36 bye **** ENDING LOGGING AT Tue Jun 21 02:59:56 2011