**** BEGIN LOGGING AT Sun Aug 14 02:59:57 2011 Aug 14 06:24:25 ~ping Aug 14 06:24:25 ~pong Aug 14 06:26:52 DocScrutinizer51: hey, good morning Aug 14 06:27:20 morning :-D Aug 14 06:28:29 funny how dead a place with 4000 hackers is at 8:30 Aug 14 07:21:24 moin Aug 14 07:24:31 moin JaMa|Off Aug 14 07:24:57 gnutoo: hi, yes, tmpdir and sstate should be enough.. but to start really from scratch remove also pseudodone Aug 14 09:15:43 ~ping Aug 14 09:15:43 apt: ping Aug 14 09:15:44 ~pong Aug 14 09:45:17 PaulFertser: a pity you weren't here Aug 14 09:48:25 DocScrutinizer51: well, probably i'll manage to get to CCC in December. Aug 14 09:48:43 DocScrutinizer51: i hope you have fun there atm :) Aug 14 09:49:53 time to packtings right now Aug 14 09:51:39 but thanks, there've been nice moments during past 5 days Aug 14 10:40:05 DocScrutinizer: seen anyone using a Neo or a FreeRunner? Aug 14 10:40:25 nope Aug 14 10:40:31 ah, pity Aug 14 10:40:50 but one was going thru lost+found Aug 14 10:41:14 and a friend had one with him, but didn't use it Aug 14 10:41:37 even a debubo Aug 14 10:42:00 seen *lots* of N900 though Aug 14 10:43:37 ya, the n900 seems still pretty popula Aug 14 10:43:38 r Aug 14 10:47:00 any idea whether the N9 uses the same audio and modem subsystems as the n900? Aug 14 11:04:22 while trying to bitbake eglibc, I get the following: Aug 14 11:04:28 /OE/shr-unstable/tmp/sysroots/x86_64-linux/usr/armv6-novfp/lib/gcc/arm-oe-linux-gnueabi/4.5.3/../../../../arm-oe-linux-gnueabi/bin/ld: /OE/shr-unstable/tmp/sysroots/x86_64-linux/usr/armv6-novfp/bin/../../lib/libz.so.1: no version information available (required by /OE/shr-unstable/tmp/sysroots/x86_64-linux/usr/armv6-novfp/lib/gcc/arm-oe-linux-gnueabi/4.5.3/../../../../arm-oe-linux-gnueabi/bin/ld) Aug 14 11:05:16 I've rebuilt zlib, zlib-native and binutils-cross Aug 14 11:05:22 still the same error Aug 14 11:05:24 any ideas Aug 14 11:05:25 ? Aug 14 11:10:41 nm Aug 14 11:10:52 apparently, I need the compiler in that list as well Aug 14 12:23:59 hi, Aug 14 12:24:08 nice ath6kl hit mainline and leave staging.... Aug 14 12:26:33 GNUtoo|laptop: do you think it'll be of any use on gta02? Aug 14 12:27:32 I didn't look at source code yet but the staging driver supported the version of the gta02 Aug 14 12:28:04 isn't it ath9k on gta2 ? Aug 14 12:28:08 no Aug 14 12:28:15 ath6kl hard mac sdio version Aug 14 12:28:48 so that's great :) Aug 14 12:28:54 indeed Aug 14 12:29:07 * GNUtoo|laptop would have prefered glamo to be mainline tough Aug 14 12:30:04 GNUtoo|laptop: do you mean somebody's actually tried using ath6kl staging version on a gta02? Aug 14 12:30:17 I don't know if someone tried Aug 14 12:30:20 I can try if you want Aug 14 12:30:29 altough I want to try mainline Aug 14 12:30:35 since staging was deleted Aug 14 12:30:44 or is about to be deleted Aug 14 12:30:48 it got some ack for that Aug 14 12:32:28 glamo is a mfd(multi function device) Aug 14 12:45:29 I don't understand bitbake's concept of dependency Aug 14 12:46:51 I'm telling it to build a package, linux-libc-headers, that only depends on one other package, unifdef, according to its .bb recipe and yet bitbake is trying to compile eglibc as well Aug 14 12:47:30 I've printed a graphviz dependency tree and there are distinct graphs with no edges between them Aug 14 12:47:55 why would bitbake produce a graph of dependencies which have no relationship to each other? Aug 14 12:48:32 why would bitbake try to install eglibc when, according to the target package's recipe, it isn't a dependency? Aug 14 12:48:38 (unifdef has no dependencies) Aug 14 12:48:43 if you did update your tree,it will build any updated bb file Aug 14 12:48:54 ah Aug 14 12:49:05 can you tell it not to do that? Aug 14 12:49:26 i think no Aug 14 12:49:44 s/think no/ don't think so/ Aug 14 12:49:44 angelox|laptop meant: i don't think so Aug 14 12:50:02 :-/ Aug 14 12:50:04 but,maybe you can create 'fake stamps' for eglibc,so it'll skip eglibc Aug 14 12:50:33 I can use -I for that, I believe Aug 14 12:50:59 NOTE: package eglibc-2.12-r21.8+svnr13230: task do_compile: Started Aug 14 12:51:01 or not :-) Aug 14 12:51:04 it's too simple to create these stamps Aug 14 12:51:28 cd into your tmp/stamps/(yourarch) Aug 14 12:51:54 copy old eglibc stamps,renaming them to the new version (in this case,eglibc-2.12-r21.8+svnr13230) Aug 14 12:52:14 but i'm not sure if it will work,since it would always prefer news packages Aug 14 12:53:59 this is odd Aug 14 12:54:05 there aren't any old stamps Aug 14 12:56:54 is there any way to get bitbake to display the targets it wants to try and update? Aug 14 12:58:07 i don't know,sorry. Aug 14 12:58:12 maybe asking #openembedded Aug 14 12:59:07 nobody in that channel :-) Aug 14 12:59:16 ops Aug 14 12:59:17 sorry Aug 14 12:59:20 #oe :-) Aug 14 13:00:10 ah Aug 14 13:00:13 thank you Aug 14 13:00:33 np Aug 14 13:23:09 hi Aug 14 13:25:51 hmmm where's morphis? Aug 14 13:31:38 freesmartphone.org: 03angelo 07angelox/testing * r34090a433e17 10aurora/ (7 files in 5 dirs): aurora-webbrowser: update location of Aoura.html Aug 14 13:38:32 i haven't see he since Thursday.. Aug 14 13:38:43 JaMa|Off: | * opkg_install_cmd: Cannot install package locale-base-en-gb. Aug 14 13:38:57 JaMa|Off: locale-base-en-us is installed correctly, then it fails at en-gb :/ Aug 14 14:40:08 I started recompiling from scratch....it's kind of long Aug 14 14:40:44 hi pespin Aug 14 14:44:05 GNUtoo|laptop, hi :) Aug 14 14:45:01 hi Aug 14 14:48:07 gnutoo: in the Device porting guide, it says: Aug 14 14:48:12 "add g_ether(so you can ssh into your phone) compiled in the kernel(easier debugging)" Aug 14 14:48:19 GNUtoo|laptop: what is "g_ether" Aug 14 14:48:20 ? Aug 14 14:48:31 a module Aug 14 14:48:43 CONFIG_USB_ETH Aug 14 14:48:49 rah, the kernel module responsible of networking through usb afaik :) Aug 14 14:48:55 please improve the porting guide as you port Aug 14 14:49:01 yes Aug 14 14:49:05 ok Aug 14 14:49:12 the porting guide is rather minimal.... Aug 14 14:49:16 heh Aug 14 14:49:18 indeed :-) Aug 14 14:49:34 but it's better than nothing since there is the structure and can be improved Aug 14 14:51:38 aye Aug 14 14:52:02 I can't seem to find an option to turn off ANDROID_PARANOID_NETWORK Aug 14 14:52:18 in the menu Aug 14 14:57:59 nm, found it Aug 14 14:58:16 finally Aug 14 14:58:19 I have a kernel Aug 14 14:59:13 GNUtoo|laptop: can I put this kernel together with the rootfs from the HTC Dream images? Aug 14 14:59:26 no Aug 14 14:59:29 it would be too large Aug 14 14:59:37 and will fill up the whole ram Aug 14 15:03:48 I don't mean as an initramfs, I mean on an SD card? Aug 14 15:05:17 GNUtoo|laptop: eg, http://build.shr-project.org/shr-unstable/images/htcdream/shr-lite-eglibc-ipk--20110720-htcdream.rootfs.tar.gz Aug 14 15:06:16 won't work either Aug 14 15:06:24 you need to fastboot the kenrel image Aug 14 15:06:34 if you want it permanently you can flash it tough Aug 14 15:06:43 yes, I've done that Aug 14 15:07:13 gnutoo: but once I've got my fastboot kernel image, what do I do about a rootfs? Aug 14 15:07:27 gnutoo: can I stick the one from the HTC Dream images on an SD card and use that? Aug 14 15:08:45 GNUtoo|laptop? Aug 14 15:10:47 rah, you put it on a microsd Aug 14 15:10:49 like that Aug 14 15:11:00 connect the microsd to your computer trough a reader Aug 14 15:11:05 mount it etc... Aug 14 15:11:07 *facepalm* Aug 14 15:11:07 and do Aug 14 15:11:11 I know Aug 14 15:11:23 tar xvjpf _the_tarball.tar.bz2 Aug 14 15:11:24 ok Aug 14 15:11:37 most user do an error there Aug 14 15:11:42 and don't use a microsd reader Aug 14 15:11:46 but use android Aug 14 15:11:49 GNUtoo|laptop: what I'm asking is: where do I get _the_tarball.tar.bz2 ? Aug 14 15:11:51 and export the microsd Aug 14 15:11:57 you built it right? Aug 14 15:12:22 no, I haven't built it Aug 14 15:12:25 I've just built a kernel Aug 14 15:12:36 then you need a rootfs Aug 14 15:12:40 bitbake shr-lite-image Aug 14 15:12:56 so I can't just use http://build.shr-project.org/shr-unstable/images/htcdream/shr-lite-eglibc-ipk--20110720-htcdream.rootfs.tar.gz ? Aug 14 15:14:09 OE @ ~ $ bitbake shr-lite-image Aug 14 15:14:10 The BBPATH variable is not set Aug 14 15:14:14 this is getting tiresome Aug 14 15:14:45 nm Aug 14 15:14:47 my bad Aug 14 15:14:59 still getting tiresome though :-) Aug 14 15:15:29 yes Aug 14 15:15:41 you can use the htcdream image Aug 14 15:15:44 but most won't work Aug 14 15:16:02 for instance the fso configs Aug 14 15:16:23 else build Aug 14 15:16:28 shr-lite-image Aug 14 15:16:42 maybe you use the shr-chroot or something like that Aug 14 15:16:55 so it's not 'bitbake' but a wrapper to it Aug 14 15:17:33 it's working now; I didn't source setup-env Aug 14 15:17:36 GNUtoo|laptop: if the fso configs for HTC Dream image wouldn't work, why would "bitbake shr-lite-image" work? Aug 14 15:18:33 it wouldn't work the same Aug 14 15:18:35 but.... Aug 14 15:18:43 it will permit you to add xorg.conf and such Aug 14 15:18:50 but follow the porting guide Aug 14 15:18:56 first boot on whatever image Aug 14 15:18:58 and add fso configs Aug 14 15:19:09 whatever image means http://build.shr-project.org/shr-unstable/images/htcdream/shr-lite-eglibc-ipk--20110720-htcdream.rootfs.tar.gz Aug 14 15:20:48 the porting guide is impenetrable Aug 14 15:22:30 GNUtoo|laptop: the porting guide says "Then go in /etc/freesmartphone/conf/ and add a directory with the name of your machine(mahimahi in our case) and copy inside the configurations from a similar machine, and tweak the configurations." Aug 14 15:22:59 yes Aug 14 15:23:04 GNUtoo|laptop: on my host, I have no /etc/freesmartphone/conf/ directory Aug 14 15:23:05 what don't you understand Aug 14 15:23:08 rah@myrtle:~$ ls -l /etc/freesmartphone/conf/ Aug 14 15:23:08 ls: cannot access /etc/freesmartphone/conf/: No such file or directory Aug 14 15:23:15 that's on the device Aug 14 15:23:18 on the phone.... Aug 14 15:23:23 you should have that directory Aug 14 15:23:30 correct it please Aug 14 15:23:49 so the following porter won't share your pain with this draft of porting guide Aug 14 15:24:14 GNUtoo|laptop: I don't understand that either; how can I change it on the phone? Aug 14 15:24:26 ssh into the phone Aug 14 15:24:28 in SHR Aug 14 15:24:29 GNUtoo|laptop: are you talking about changing something under android? Aug 14 15:24:31 when it's booted Aug 14 15:24:34 no Aug 14 15:24:36 under SHR Aug 14 15:25:46 GNUtoo|laptop: how can I ssh into the machine? Aug 14 15:25:56 boot it Aug 14 15:25:58 s/the machine/the phone/ Aug 14 15:25:59 rah meant: GNUtoo|laptop: how can I ssh into the phone? Aug 14 15:26:01 and do that Aug 14 15:26:15 ifconfig usb0 192.168.0.200 #on your laptop Aug 14 15:26:25 ssh root@192.168.0.202 #on your laptop Aug 14 15:26:59 GNUtoo|laptop: I don't have a usb0 Aug 14 15:27:08 first boot the phone Aug 14 15:27:16 you must successfully boot the phone Aug 14 15:27:19 it's the first task Aug 14 15:27:27 then connect it to your laptop Aug 14 15:27:29 how will I know whether the phone is successfully booted? Aug 14 15:27:31 and usb0 will appear Aug 14 15:27:35 if it doesn't appear.... Aug 14 15:27:45 you'll see garbage of a logo on the screen Aug 14 15:28:03 garbage means like on the htcdream shr youtube video Aug 14 15:28:21 GNUtoo|laptop: I haven't seen any youtube video Aug 14 15:28:36 what's your phone already? Aug 14 15:28:41 motorolla something Aug 14 15:28:55 Motorola DEXT Aug 14 15:28:59 ok Aug 14 15:29:06 and it's similar to the htc dream Aug 14 15:29:10 yes Aug 14 15:29:35 ok Aug 14 15:30:06 extract the htcdream's rootfs Aug 14 15:30:19 I have Aug 14 15:30:23 and make a bootimg or boot directly your kernel Aug 14 15:30:27 I have Aug 14 15:30:29 and describe what you see Aug 14 15:30:33 nothing Aug 14 15:30:37 ah? Aug 14 15:30:38 the screen does not change Aug 14 15:30:40 ok Aug 14 15:30:49 it's blocked on the bootloader screen? Aug 14 15:30:54 like carrier logo? Aug 14 15:31:00 try without mkbootimg Aug 14 15:31:06 try to fastboot the kenrel directly Aug 14 15:31:06 it's the Motorola logo, but yes Aug 14 15:31:14 ok Aug 14 15:31:33 I can't use fastboot Aug 14 15:31:36 that means that the kenrel doesn't boot Aug 14 15:31:37 ah? Aug 14 15:31:44 signed bootloader? Aug 14 15:31:50 yes, my bootloader is locked Aug 14 15:31:54 ok Aug 14 15:32:01 I use the flash_image command under android Aug 14 15:32:05 ok Aug 14 15:32:16 then tripple check your kenrel options Aug 14 15:32:37 I guess you started with cyanogenmod's config Aug 14 15:32:45 yes Aug 14 15:32:57 ok Aug 14 15:33:08 what changes did you made to it? Aug 14 15:33:47 everything is says in the guide Aug 14 15:33:55 let's recap together Aug 14 15:34:04 you removed initramfs/initrd Aug 14 15:34:05 added g_ether, removed paranoid network and removed initramfs Aug 14 15:34:09 yes Aug 14 15:34:14 so it doesn't have initramfs suport at all right? Aug 14 15:34:16 hmmm Aug 14 15:34:35 right Aug 14 15:34:44 then try to add framebuffer console Aug 14 15:34:51 this is the kernel command line: "console=tty1 root=/dev/mmcblk0p1 rootdelay=8 fbcon=rotate:1 panic=30 mem=88M" Aug 14 15:35:03 ok Aug 14 15:35:22 maybe it failed to find the rootfs Aug 14 15:35:29 that can easily be found out Aug 14 15:35:37 rootdelay=8 Aug 14 15:35:39 see that Aug 14 15:35:57 take a watch capable of chronometring Aug 14 15:36:14 add rootdelay=60 Aug 14 15:36:17 boot Aug 14 15:36:21 mesure the boot time Aug 14 15:36:30 add rootdelay=10 Aug 14 15:36:34 mesure the boot time Aug 14 15:36:41 if there is 50s of difference Aug 14 15:36:48 it didn't find the rootfs Aug 14 15:36:59 wait a sec Aug 14 15:37:09 yes I'm right Aug 14 15:37:15 the framebuffer console is already enabled Aug 14 15:37:23 ok Aug 14 15:37:32 then it should not be the rootfsd Aug 14 15:37:35 hmmm Aug 14 15:37:53 look how android boots its kernel Aug 14 15:38:00 hmmm Aug 14 15:38:11 I suspect initramfs issues Aug 14 15:38:20 `no_console_suspend=1 console=null quiet' Aug 14 15:38:40 that's the command line for the android kernel Aug 14 15:38:43 ok Aug 14 15:38:48 did you add that: Aug 14 15:39:01 override cmdline Aug 14 15:39:06 what's your knerel version? Aug 14 15:39:22 did I add "override cmdline" to what? Aug 14 15:39:31 to that: Aug 14 15:39:32 the kernel version is 2.6.29.6 Aug 14 15:39:36 ok old Aug 14 15:39:56 this is the kernel command line: "console=tty1 root=/dev/mmcblk0p1 rootdelay=8 fbcon=rotate:1 panic=30 mem=88M" Aug 14 15:40:10 I guess you selected the option to override the cmdline Aug 14 15:40:13 so that's ok Aug 14 15:40:19 which option? Aug 14 15:40:28 remove that Aug 14 15:40:29 fbcon=rotate:1 Aug 14 15:40:49 I guess it should have no influence... Aug 14 15:41:06 let me look for the option Aug 14 15:42:08 CMDLINE + CMDLINE_FORCE Aug 14 15:42:23 you should set CMDLINE to what you said before Aug 14 15:42:29 and check CMDLINE_FORCE Aug 14 15:43:39 it's in boot options Aug 14 15:44:51 there's no CMDLINE_FORCE in my kernel's configuration Aug 14 15:45:01 ah Aug 14 15:45:04 I mean.. there's no option Aug 14 15:45:06 that's bad Aug 14 15:45:22 do you have a more recent kernel? Aug 14 15:45:46 no; this is the kernel from cyanogenmod Aug 14 15:45:47 29 is too old.... Aug 14 15:45:57 what's your machine name? Aug 14 15:46:06 kernel name Aug 14 15:46:19 like for instance mahimahi for nexus one Aug 14 15:47:04 morrison Aug 14 15:47:29 ok Aug 14 15:47:31 let me look Aug 14 15:51:59 hmmm Aug 14 15:53:13 do you know a more recent kernel for your device? Aug 14 15:53:27 no Aug 14 15:53:53 where are your kenrel sources? Aug 14 15:54:22 https://github.com/ngiordano/kernel_morrison.git Aug 14 15:54:29 there's a guide on github too Aug 14 15:54:36 I'll find it Aug 14 15:55:20 GNUtoo|laptop: https://github.com/adumont/cm4morrison_guide/wiki/Kernel-building-guide-for-Motorola-Cliq Aug 14 15:56:16 ok Aug 14 15:57:01 I'll fetch and look Aug 14 15:58:31 anyone knows how to properly rebuild locales? Aug 14 15:58:41 GNUtoo|laptop: it's booting Aug 14 15:58:58 GNUtoo|laptop: I recompiled the kernel with the command line built-in Aug 14 15:59:14 GNUtoo|laptop: now the display is showing console output Aug 14 15:59:27 very slowly :-) Aug 14 15:59:43 wow Aug 14 15:59:53 because I was out of ideas..... Aug 14 16:00:11 it seems to be oops'ing though Aug 14 16:00:51 ah? Aug 14 16:01:05 it oops on something usually Aug 14 16:01:09 what does it oops on? Aug 14 16:01:28 the framebuffer, it looks like Aug 14 16:01:45 ok Aug 14 16:01:47 it's difficult to tell though because it isn't rotated :-) Aug 14 16:01:49 remove framebuffer console then Aug 14 16:02:45 cleaning eglibc, eglibc-initial and eglibc-locale didn't work :/ Aug 14 16:03:16 I'm rebuilding from scratch.... Aug 14 16:17:05 I'll go bye Aug 14 18:12:58 dos1, having the "missing locale-base-en-gb" issue? Aug 14 18:12:59 :P Aug 14 18:13:06 pespin: yep Aug 14 18:13:16 dos1, same here >.< Aug 14 18:13:53 dos1, mrmoku told me to add it to the locales in local.conf, but still I need to rebuuild the recipe which provides it as far as I see Aug 14 18:18:08 pespin: initialy i had locale generation disabled at all, but later i decided to build image Aug 14 18:18:26 pespin: so looks like us locale got generated correctly Aug 14 18:18:39 but i have already added GB locale and tried to regenerate locales Aug 14 18:18:50 maybe i missed something, trying again atm... Aug 14 18:18:58 bb -c clean shr-lite-image eglibc eglibc-initial eglibc-locale Aug 14 18:25:08 dos1, please tell me if you success :) Aug 14 19:29:14 gnutoo: it's booted and I've plugged it in but I don't have a usb0 Aug 14 19:30:26 ok Aug 14 19:30:57 try that on your laptop: modprobe cdc_ether Aug 14 19:31:14 it's not a laptop btw, it's a desktop :-) Aug 14 19:31:24 regardless, it doesn't have cdc_ether Aug 14 19:32:14 gnutoo: that doesn't matter though as the only USB interface on the phone is for USB storage Aug 14 19:32:27 ok Aug 14 19:32:38 http://codepad.org/ogqIksCX Aug 14 19:32:45 that's the output of lsusb Aug 14 19:32:59 CONFIG_USB_NET_CDCETHER=m Aug 14 19:33:22 ? Aug 14 19:33:28 where Aug 14 19:33:28 ? Aug 14 19:33:40 desktoip kenrel Aug 14 19:33:45 err Aug 14 19:33:52 there are no CDC interfaces on the phone Aug 14 19:34:08 sorry it lags as hell on my connection... Aug 14 19:34:15 ok Aug 14 19:34:46 JaMa|Off: ping Aug 14 19:35:18 in 10min it'll stop laging when I'll finish downloading something(high resolution pictures of the nexus S ) Aug 14 19:38:38 hmm Aug 14 19:38:53 i remember times, when cleaning recipe in bitbake meant cleaning recipe :x Aug 14 19:39:00 what happened to those? :P Aug 14 19:39:47 -c cleanstate Aug 14 19:39:49 oops Aug 14 19:40:00 -c cleansstate Aug 14 19:43:38 gnutoo: thanks a lot! :) Aug 14 19:44:14 np, I finished my download... Aug 14 19:44:50 rah: what's your desktop's kernel config? Aug 14 19:45:12 gnutoo: at present, with no CDC support Aug 14 19:46:02 gnutoo: do you want to know about the kernel config? Aug 14 19:47:00 s/do you what/what do you want/ Aug 14 19:49:52 add cdc or compile cdc_ethernet for your desktop Aug 14 19:50:21 gnutoo: how will that make a difference if the phone has no CDC USB interfaces? Aug 14 19:51:43 the phone has USB_ETH Aug 14 19:51:58 and the desktop driver that talks to that is cdc_ether Aug 14 19:52:06 I say stuff Aug 14 19:52:17 but please update the porting guide as you learn Aug 14 19:52:49 gnutoo: if the phone had USB_ETH, wouldn't there be an interface listed in the device's USB configuration? Aug 14 19:53:50 yes it should Aug 14 19:53:59 it isn't Aug 14 19:54:04 let me look at your lsusb Aug 14 19:54:10 I couldn't before because of the lag Aug 14 19:55:10 what's your device config with usb gadget and USB_ETH? Aug 14 19:55:13 did you : Aug 14 19:55:22 *)configure that built in, not as module Aug 14 19:55:32 *)updated /etc/network/interfaces Aug 14 19:55:34 it is built in Aug 14 19:55:41 it is not a module Aug 14 19:56:22 I haven't touched /etc/network/interfaces Aug 14 20:11:04 you need to fix /etc/network/interfaces Aug 14 20:11:08