**** BEGIN LOGGING AT Thu Jan 19 02:59:57 2012 Jan 19 04:05:11 have set some enviroments in uboot that is on NAND: Jan 19 04:05:12 setenv mtdparts mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata) Jan 19 04:05:12 and this is result of mtdparts command > http://pastebin.com/2hgCwDgz Jan 19 04:05:12 but when want to sudo dfu-util -a userdata -R -D userdata.img Jan 19 04:05:12 dfu says No such Alternate Setting: "userdata" Jan 19 04:05:20 how to fix it ? Jan 19 09:36:29 moin Jan 19 09:56:19 SHR: 03Martin.Jansa 07shr-chroot * rfc22290f6afc 10/ (497 files in 22 dirs): system upgrade Jan 19 11:37:03 HI :-) Jan 19 12:24:28 dcordes: hi Jan 19 13:41:12 not much going on here Jan 19 13:41:16 shr dead ? Jan 19 13:43:01 dcordes: only shr-unstable and friends, work moved to shr-core: http://build.shr-project.org/shr-core/ Jan 19 13:57:22 SHR: 03Martin.Jansa 07meta-smartphone * rff85e1941ccb 10/meta-shr/ (conf/distro/shr.conf recipes-core/tasks/task-base.bbappend): meta-shr: add VIRTUAL-RUNTIME_alsa-state settings Jan 19 13:57:32 SHR: 03Martin.Jansa 07meta-smartphone * r08db6ac8f35a 10/meta-shr/conf/distro/shr.conf: meta-shr: add description to VIRTUAL-RUNTIME vars Jan 19 14:02:29 dcordes: alive and kicking :D Jan 19 14:22:48 dcordes: what's happening in the HTC anti-vendor-port department? :) Jan 19 14:26:02 dcordes, is online? Jan 19 14:30:30 basically the status I know is that it made it in shr-core Jan 19 14:30:38 but then no activity from dcordes Jan 19 14:30:59 that's why HD2 was "unsupported" at FSOSHRCON Jan 19 14:51:19 right Jan 19 16:01:36 SHR: 03Martin.Jansa 07buildhistory * r656c3798a46d 10/packages/armv4t-oe-linux-gnueabi/e2fsprogs/ (29 files in 29 dirs): Build 201201191523 of shr 20120119 for machine om-gta02 on shr-chroot Jan 19 16:01:40 SHR: 03Martin.Jansa 07buildhistory * r322b3331e45d 10/packages/armv4t-oe-linux-gnueabi/ (348 files in 348 dirs): Build 201201191659 of shr 20120119 for machine om-gta02 on shr-chroot Jan 19 16:02:30 mickey_office, note that I'm for dropping palm pre too Jan 19 16:02:36 it doesn't boot anymore Jan 19 16:02:43 and no one is fixing it Jan 19 16:02:47 so I tried to fix Jan 19 16:02:52 but without serial it's kind of hard Jan 19 16:03:05 I tried to make traces with klog but that failed Jan 19 16:03:23 serial is unknown on pre* but I suspect it's behind the USB Jan 19 16:04:50 GNUtoo: hi , if it does not disturb you , there is question Jan 19 16:11:46 then ask Jan 19 16:11:51 I'll see if I can respond Jan 19 16:11:59 but I'm working Jan 19 16:12:02 so I can't try Jan 19 16:15:26 this is uboot on nand that environments are set http://pastebin.com/2hgCwDgz in this we have 0-6 partition numbers , and this is default (0-5) structure of uboot on NOR http://wiki.openmoko.org/wiki/Manuals/Dfu-util#--list ... but now when fr is in nand uboot , dfu-util -l shows http://pastebin.com/59fLK4GC why there is no userdata ? GNUtoo Jan 19 16:16:12 because it's called rootfs! Jan 19 16:16:46 ah no, sorry for noise Jan 19 16:18:50 * JaMa doesn't have userdata mtdpart at all Jan 19 16:18:55 http://paste.pocoo.org/show/537315/ Jan 19 16:19:14 JaMa: you should setenv it Jan 19 16:19:45 I'm fine with working NAND :) Jan 19 16:22:38 maybe you should start your question by saying that you're trying to modify default mtdparts Jan 19 16:23:52 GNUtoo: any opinion about having system and not having userdata ? Jan 19 16:24:54 printenv and mtdparts to see Jan 19 16:27:34 GNUtoo: printenv http://pastebin.com/E08fHr2G mtdparts gave u above http://pastebin.com/2hgCwDgz Jan 19 16:34:32 I've no idea sorry Jan 19 16:35:32 http://www.google.com/url?sa=D&q=http://code.google.com/p/android-on-freerunner/wiki/FrequentlyAskedQuestions&usg=AFQjCNGwH3i3RbrJjvBg4Z1s_0d-YSifiw GNUtoo code.google is blocked for me ,isthere any usable info there? Jan 19 16:41:21 yes a lot Jan 19 16:41:24 let me read it Jan 19 16:41:46 dfu-util -a kernel -R -D kernel.img Jan 19 16:41:46 dfu-util -a rootfs -R -D system.img Jan 19 16:41:46 dfu-util -a u-boot -R -D qi.img Jan 19 16:41:52 that's what it says Jan 19 16:42:02 * GNUtoo got an idea Jan 19 16:42:11 you got system Jan 19 16:42:13 flash it now Jan 19 16:42:17 with system etc... Jan 19 16:42:27 but don't flash userdata Jan 19 16:42:39 instead boot in android and try to see if there are flashing uttilities there Jan 19 16:42:48 for flashing the remaining userdata Jan 19 16:44:11 yea my question is that how to create the userdata partition after installation , because of lacking userdata partition may not install any .apk GNUtoo Jan 19 16:44:42 try to see if you have flash uttilites Jan 19 16:44:47 in android already Jan 19 16:45:25 GNUtoo: of course could boot android without qi too Jan 19 16:46:20 but ok will boot it again wait Jan 19 16:47:42 GNUtoo: a question , if system be flashed with system env that is set in nand uboot when we remove that uboot will not that make a trouble ? Jan 19 16:51:59 hmmm Jan 19 16:52:12 if we're lucky it should not Jan 19 16:53:10 but we will see :P Jan 19 16:54:51 GNUtoo: seems Uboot DFU protocol implementation (or dfu-util) has a maximun of 7 (1 ram 6 nand) Jan 19 16:54:52 downlad/upload positions harcoded. ( Jan 19 16:57:51 GNUtoo: can we use one of factory/uboot_env partition for userdata image ? Jan 19 17:00:34 no Jan 19 17:00:37 we can't Jan 19 17:00:40 or they are used Jan 19 17:00:43 or they are too small Jan 19 17:00:52 which one are used ? Jan 19 17:00:58 and which one are free? Jan 19 17:01:33 u-boot is used Jan 19 17:01:45 u-boot_env should be free but it's really small Jan 19 17:01:54 0x00040000 / 1024 / 1024 ... Jan 19 17:02:12 less than 1M Jan 19 17:02:27 256k Jan 19 17:02:36 kernel is used Jan 19 17:02:45 splash is unused but again it's small Jan 19 17:02:46 how did you calculate its size Jan 19 17:02:56 0x00040000 / 1024 / 1024 Jan 19 17:03:01 type that in python Jan 19 17:03:18 hex to dec? Jan 19 17:03:24 done automatically Jan 19 17:03:35 factory ? Jan 19 17:03:45 ? Jan 19 17:04:01 there is factory partition Jan 19 17:04:05 splash is 640k Jan 19 17:04:07 ok Jan 19 17:04:13 I think it's used Jan 19 17:04:16 by bad blocks Jan 19 17:04:18 or something like that Jan 19 17:04:21 but again it's small Jan 19 17:04:34 ohum android is booted and now m in desktop Jan 19 17:04:37 256k Jan 19 17:04:43 adb shell in it Jan 19 17:04:44 ash Jan 19 17:04:48 then try that Jan 19 17:04:51 flash[tab] Jan 19 17:05:20 in dev tools? Jan 19 17:05:57 ./adb shell with the correct IP Jan 19 17:06:02 gives you a shell Jan 19 17:06:12 dev_tools won't help you because it's GUI tools Jan 19 17:06:21 the only thing that could work graphically is the console Jan 19 17:06:26 don't get what you mean of ./adb Jan 19 17:06:28 you should have a shell Jan 19 17:06:35 there is terminal Jan 19 17:06:41 it's like ssh Jan 19 17:06:43 remember? Jan 19 17:06:51 didn't used it Jan 19 17:07:00 here is terminal Jan 19 17:07:13 yes but you lack tab in the keyboard Jan 19 17:07:51 GNUtoo: correct ip ? Jan 19 17:08:09 http://ftp.osuosl.org/pub/replicant/images/replicant-2.3/preview/0002/tools/adb Jan 19 17:08:19 2f4fcf4b0ba201b7662130cfdd447656 adb Jan 19 17:08:39 SHR: 03Martin.Jansa 07buildhistory * r46c42237732f 10/packages/armv4t-oe-linux-gnueabi/systemd/ (10 files in 10 dirs): Build 201201191714 of shr 20120119 for machine om-gta02 on shr-chroot Jan 19 17:08:46 http://wiki.openmoko.org/wiki/Android_on_Freerunner Jan 19 17:09:09 ifconfig usb0 192.168.0.200 netmask 255.255.255.0 Jan 19 17:09:17 adb kill-server Jan 19 17:09:26 why this Jan 19 17:09:31 ADBHOST=192.168.0.202 adb shell Jan 19 17:09:34 can connect android to my home wifi Jan 19 17:09:36 to get a shell on the device Jan 19 17:09:44 yes but you need to execute shell commands Jan 19 17:09:59 if you can go into your freerunner from wifi it would be nice Jan 19 17:10:05 but currently you can't Jan 19 17:10:10 because you have no ssh Jan 19 17:10:26 ohum Jan 19 17:10:42 wait Jan 19 17:11:53 after getting shell ? Jan 19 17:11:57 ash Jan 19 17:11:58 then Jan 19 17:12:03 flash[tab] Jan 19 17:20:21 I'll make some backups of my freerunner NAND Jan 19 17:21:04 why :P Jan 19 17:21:30 hey Jan 19 17:21:35 hey Jan 19 17:21:46 dcordes, hi Jan 19 17:22:01 how's it going ? Jan 19 17:22:10 GNUtoo: do you still have the nexus ? Jan 19 17:22:15 dcordes, bad for you, see http://wiki.freesmartphone.org/index.php/Hardware Jan 19 17:22:44 your device became unmaintained (we decided at FSOSHRCON) Jan 19 17:22:49 my htc devices too Jan 19 17:23:10 dcordes, I lent it to my brother, but it's still mine so I can get back when I want Jan 19 17:23:21 but that's the nexus one Jan 19 17:23:25 I've also a nexus S Jan 19 17:23:51 dcordes, are you planning a comeback? Jan 19 17:25:33 dcordes, do you want to know the current status and more details on FSOSHRCON? Jan 19 17:27:08 GNUtoo: unfortunately ping 192.168.0.202 fails .. Jan 19 17:27:15 alabd, ah ouch Jan 19 17:27:25 alabd, what's your private ips? Jan 19 17:27:25 wait android was sleep Jan 19 17:27:30 ok Jan 19 17:28:44 :P which private , solved Jan 19 17:29:01 ah ok if it's solved no need anymore Jan 19 17:29:19 it was to check if you were already in the 192.168.0.* range Jan 19 17:29:22 ping is ok Jan 19 17:29:25 ok Jan 19 17:29:28 then adb in it Jan 19 17:29:28 but ADBHOST=192.168.0.202 adb shell Jan 19 17:29:28 error: device not found Jan 19 17:30:36 GNUtoo: what's the error for Jan 19 17:30:49 it says it cannot find your device Jan 19 17:30:55 why Jan 19 17:30:56 maybe gab the official android adb then Jan 19 17:31:09 note that all the adb commands should be run as root Jan 19 17:31:18 http://wiki.openmoko.org/wiki/Android_debug_bridge Jan 19 17:31:24 also enable adb shell in the GUI Jan 19 17:31:32 ok Jan 19 17:31:37 settings->applications->development->usb debuggong Jan 19 17:31:40 *debugging Jan 19 17:32:31 hmmm Jan 19 17:32:36 it's the second time that I've Jan 19 17:32:37 dfu_upload: usb_control_msg returned -110: error sending control message: Connection timed out Jan 19 17:32:47 I'll abandon the backup trough dfu Jan 19 17:33:57 alsodid them with sudo but the same error Jan 19 17:34:10 ok maybe their adb is modified then Jan 19 17:34:23 installed wiki adb Jan 19 17:34:27 ok Jan 19 17:34:41 ifconfig usb0 192.168.0.200 netmask 255.255.255.0 Jan 19 17:34:43 you did that? Jan 19 17:35:37 yes Jan 19 17:35:41 ok Jan 19 17:35:42 hmmm Jan 19 17:35:48 you enabled in the GUI I guess Jan 19 17:36:27 why ? did as what wiki said is it gui ? Jan 19 17:36:27 let me try something Jan 19 17:36:35 maybe unyaffs2 would work to see the files Jan 19 17:36:54 wiki says time should be valid Jan 19 17:37:15 seem it's valid Jan 19 17:37:54 GNUtoo: first tell where to change sleep timeout ? Jan 19 17:38:15 I don't know Jan 19 17:39:49 ahhh it's jffs2 Jan 19 17:39:52 wait a second Jan 19 17:39:59 GNUtoo: how to Make sure the date and timesettings are valid Jan 19 17:40:08 use ntpdate Jan 19 17:40:14 date is 1 jan 2000 Jan 19 17:40:17 so invalid ? Jan 19 17:40:18 not valid Jan 19 17:41:54 GNUtoo: 2012 :P ? Jan 19 17:42:43 SHR: 03Martin.Jansa 07buildhistory * r1be4413ef5b6 10/packages/ (162 files in 162 dirs): Build 201201191822 of shr 20120119 for machine om-gta02 on shr-chroot Jan 19 17:43:07 yes Jan 19 17:43:36 soon sleep is killing me :P Jan 19 17:48:18 at all it does not list devices Jan 19 17:48:20 ADBHOST=192.168.0.202 adb devices Jan 19 17:48:20 * daemon not running. starting it now * Jan 19 17:48:20 * daemon started successfully * Jan 19 17:48:20 List of devices attached Jan 19 17:48:32 adb kill-server Jan 19 17:48:34 and retry Jan 19 17:48:40 tried man Jan 19 17:49:04 then I don't know Jan 19 17:49:27 I tried jffs2dump but it doesn't seem capable of extracting from jffs2 Jan 19 17:50:29 after getting shell what should be done for partitioning ? Jan 19 17:51:47 I don't know Jan 19 17:51:57 the goal was to find a flashing uttility Jan 19 17:52:02 I don't know if there is one Jan 19 17:52:07 :P Jan 19 17:52:10 something like flash_image Jan 19 17:52:14 or mtd-utils Jan 19 17:52:42 and with qi flashed you would just to have to flash userdata Jan 19 17:52:46 and you would be done Jan 19 17:53:22 yes now android is booted with uboot is there any need to qi ? Jan 19 17:53:24 but that works only if you have a flashing uttility or if you can push one Jan 19 17:53:35 do that then: Jan 19 17:53:39 cat /proc/mtd Jan 19 17:53:41 and paste it Jan 19 17:53:46 or rather Jan 19 17:53:52 look if you have userdata partition Jan 19 17:54:44 ping dcordes Jan 19 17:55:18 GNUtoo: init.rc script responsible for this propose. Into this script /data Jan 19 17:55:18 directory created and mounted. Jan 19 17:55:18 You have to work with source code to change this script. Jan 19 17:56:11 ? Jan 19 17:56:14 cat /proc/mtd Jan 19 17:59:40 GNUtoo: how to do it ? that terminal emulator does not work properly Jan 19 17:59:49 ash Jan 19 17:59:54 cat /proc/mtd Jan 19 18:00:10 enter does not work there Jan 19 18:00:20 ah ok Jan 19 18:00:31 then wait for when you'll have adb working Jan 19 18:00:40 :P Jan 19 18:09:44 SHR: 03shr-devel 07buildhistory * r3a475de46749 10/packages/ (210 files in 210 dirs): Build 201201191617 of shr 20120119 for machine om-gta02 on shr-chroot Jan 19 18:15:51 GNUtoo: sorry have not enabled adb in gui Jan 19 18:15:55 now it's ok Jan 19 18:16:21 ok nice Jan 19 18:16:22 cat /proc/mtd Jan 19 18:16:22 run Jan 19 18:16:22 dev: size erasesize name Jan 19 18:16:22 mtd0: 00200000 00010000 "physmap-flash.0" Jan 19 18:16:22 mtd1: 00040000 00020000 "u-boot" Jan 19 18:16:22 mtd2: 00040000 00020000 "u-boot_env" Jan 19 18:16:23 mtd3: 00800000 00020000 "kernel" Jan 19 18:16:23 mtd4: 000a0000 00020000 "splash" Jan 19 18:16:24 mtd5: 00040000 00020000 "factory" Jan 19 18:16:24 mtd6: 04000000 00020000 "system" Jan 19 18:16:25 mtd7: 0b6a0000 00020000 "userdata" Jan 19 18:16:28 ok nice Jan 19 18:17:04 try to see if there is some tools for flashing Jan 19 18:17:09 ash will enable the tab Jan 19 18:17:12 what doe sit mean we need just mount ? Jan 19 18:17:13 *tab completion Jan 19 18:17:32 it means that the partitioning was ok Jan 19 18:17:36 ash ? Jan 19 18:17:44 ash is a shell Jan 19 18:17:48 the busybox shell Jan 19 18:18:00 no tab future now Jan 19 18:18:13 try flash_image Jan 19 18:18:28 try nandwrite Jan 19 18:18:44 both not found :P Jan 19 18:19:16 hmmm Jan 19 18:19:17 GNUtoo: don't we need mounting only ? Jan 19 18:19:33 I don't think so Jan 19 18:19:37 we need to flash that thing Jan 19 18:19:42 to make things work ok Jan 19 18:19:58 to do that you will need to search the web for a flasher Jan 19 18:20:00 /dev/block/mtdblock7 /data yaffs2 rw,nosuid,nodev 0 0 Jan 19 18:20:22 like a command line flasher for armv4 for android Jan 19 18:20:29 it can also be static Jan 19 18:20:32 that would work too Jan 19 18:20:39 (the static Jan 19 18:20:42 ) Jan 19 18:21:24 GNUtoo: it should be installed Jan 19 18:21:37 what should be installed? Jan 19 18:21:41 flasher Jan 19 18:21:43 if not Jan 19 18:21:46 we can not install Jan 19 18:21:50 because of lacking Jan 19 18:21:54 userdata Jan 19 18:21:57 space Jan 19 18:22:02 hum? Jan 19 18:22:47 no you can Jan 19 18:22:49 ./adb remount Jan 19 18:22:54 adb push Jan 19 18:22:57 there is another way to say android save data into /system Jan 19 18:23:06 yes I just wrote how Jan 19 18:23:14 but it's for arbitrary files Jan 19 18:23:19 not for the applications Jan 19 18:23:32 remount for what ? Jan 19 18:23:42 for pushing the flasher application Jan 19 18:23:51 that you have to find on the web Jan 19 18:24:23 is it possible to say android use /system instead of /data ? Jan 19 18:24:39 maybe if you recompile it and change its code Jan 19 18:24:53 :D Jan 19 18:25:09 and I think it's out of our reach Jan 19 18:25:12 GNUtoo: partition is made on nand ? Jan 19 18:25:20 if they did it that way there is a reason (android-on-freerunner) Jan 19 18:25:26 yes Jan 19 18:25:37 so we need kinda formatting ? Jan 19 18:25:45 flash is kinda formatting ? Jan 19 18:25:46 ? Jan 19 18:25:54 flashing is like: Jan 19 18:26:05 dd if=image of=/dev/mmcblk0p1 Jan 19 18:26:19 only that the interface is different Jan 19 18:26:24 so you need a flasher Jan 19 18:26:26 dd won't work Jan 19 18:26:41 because it's a flash chip and not a hard disk Jan 19 18:26:48 microsd have FLT inside them Jan 19 18:26:56 Flash translation layer Jan 19 18:27:00 *FTL Jan 19 18:27:02 what does *.img do exactly ? Jan 19 18:27:13 when goes on partition Jan 19 18:29:40 I don't understnad Jan 19 18:29:44 but do what I said Jan 19 18:29:46 find a flasher Jan 19 18:30:04 and flash the image on userdata Jan 19 18:30:10 the image beeing userdata.img Jan 19 18:31:40 but image isnot on android Jan 19 18:35:47 does not it make problem man ? should not .img file be on nand then ? Jan 19 18:36:35 ??? Jan 19 18:37:29 when we flash from pc our image is on pc , when we flash from android our image should be on android ? Jan 19 18:37:49 yes Jan 19 18:38:02 oh Jan 19 18:38:22 how to have image on android ? Jan 19 18:38:34 ./adb push Jan 19 18:38:57 dcordes, ping Jan 19 18:39:29 you mean in adb shell > #push Jan 19 18:39:37 no Jan 19 18:39:42 I mean: Jan 19 18:39:57 ./adb push ./local_file /remote/dir/to/put/the/file/in/ Jan 19 18:41:00 rmote dit like /system Jan 19 18:41:35 how to know free space at /system android Jan 19 18:43:11 you can't Jan 19 18:43:29 anyway userdata.img is quite small to flash Jan 19 18:43:31 it's 10k Jan 19 18:43:40 -rw-r--r-- 1 gnutoo gnutoo 10K 2011-01-20 10:12 userdata.img Jan 19 18:43:52 the partition is bigger tough Jan 19 18:51:02 biggest Jan 19 18:51:23 freesmartphone.org: 03morphis 07aurora * r81f40beafed5 10/aurora-daemon/applications/launcher/main.qml: Jan 19 18:51:23 freesmartphone.org: aurora-daemon: applications: launcher: correct using the wrong variable Jan 19 18:51:23 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:24 freesmartphone.org: 03morphis 07aurora * rea540c82acc9 10/aurora-daemon/components/ (Header.qml Makefile.am qmldir): Jan 19 18:51:24 freesmartphone.org: aurora-daemon: components: reintroduce header component Jan 19 18:51:25 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:25 freesmartphone.org: 03morphis 07aurora * r5295472993ee 10/aurora-daemon/components/PageStackWindow.qml: Jan 19 18:51:25 freesmartphone.org: aurora-daemon: components: add little top margin for system toolbar Jan 19 18:51:25 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:26 freesmartphone.org: 03morphis 07aurora * r5eb5c4e73215 10/aurora-daemon/applications/phone/Dialpad.qml: Jan 19 18:51:26 freesmartphone.org: aurora-daemon: applications: phone: style adjustments for dialpad component Jan 19 18:51:27 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:27 freesmartphone.org: 03morphis 07aurora * r860ebe609c34 10/aurora-daemon/components/AbstractButton.qml: Jan 19 18:51:39 # cat /proc/partitions Jan 19 18:51:39 major minor #blocks name Jan 19 18:51:39 31 0 2048 mtdblock0 Jan 19 18:51:39 31 1 256 mtdblock1 Jan 19 18:51:39 31 2 256 mtdblock2 Jan 19 18:51:39 31 3 8192 mtdblock3 Jan 19 18:51:40 31 4 640 mtdblock4 Jan 19 18:51:40 31 5 256 mtdblock5 Jan 19 18:51:41 31 6 65536 mtdblock6 Jan 19 18:51:41 31 7 187008 mtdblock7 Jan 19 18:51:50 freesmartphone.org: aurora-daemon: components: drop use of accessible settings Jan 19 18:51:50 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:50 freesmartphone.org: 03morphis 07aurora * rc89e0e744a1c 10/aurora-daemon/ (10 files in 3 dirs): Jan 19 18:51:50 freesmartphone.org: aurora-daemon: applications: reintegrate settings application Jan 19 18:51:50 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:50 freesmartphone.org: 03morphis 07aurora * r292504729fa0 10/aurora-daemon/ (5 files in 2 dirs): Jan 19 18:51:51 freesmartphone.org: aurora-daemon: components: make hub list from launcher app a common component Jan 19 18:51:51 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:51:52 freesmartphone.org: 03morphis 07aurora * r70f7bcca4bf0 10/aurora-daemon/ (13 files in 4 dirs): Jan 19 18:52:50 freesmartphone.org: aurora-daemon: components: import switch component from qt-components Jan 19 18:52:50 freesmartphone.org: Signed-off-by: Simon Busch Jan 19 18:52:50 freesmartphone.org: 03morphis 07aurora * rcc5b9ee75a05 10/aurora-daemon/components/VisualItemList.qml: Jan 19 18:52:50 freesmartphone.org: aurora-daemon: components: make height of visual item list items a configurable Jan 19 18:52:50 freesmartphone.org: Signed-off-by: Simon Busch