**** BEGIN LOGGING AT Sun Aug 19 03:00:01 2012 Aug 19 10:44:06 heyho Aug 19 10:51:46 Hi morphis, Aug 19 11:42:36 Hello, can you help me with this error: http://pastebin.com/89zCc4PS I've got it in SHR-chroot , but also in non chroot and for every machines . Thanks Aug 19 11:53:10 And I have a question... Can I port SHR to machine with kernel 2.6.32? Thanks Aug 19 11:54:57 usakc: about the error above, wait until JaMa is back Aug 19 11:55:25 usakc: and about porting to 2.6.32: it depends mainly on systemd and systemd is requiring a very new kernel Aug 19 11:56:37 What's the minimal kernel version? Aug 19 12:01:31 puuh Aug 19 12:01:50 the most important thing is devtmpfs Aug 19 12:02:01 There is 2.6.32 on Trac porting guide... Aug 19 12:02:06 it should be supported in 2.6.32 Aug 19 12:02:11 you mean SHR trac? Aug 19 12:02:17 Yes Aug 19 12:02:51 documentation of the wiki is maybe not consistent here Aug 19 12:03:00 which device are you thinking about? Aug 19 12:03:14 I know the htcdream has a 2.6.32 kernel Aug 19 12:03:26 Nokia N950/N9 Aug 19 12:03:29 ah Aug 19 12:03:45 some people have the N900 running with SHR Aug 19 12:03:53 is there much difference between both? Aug 19 12:05:06 I found only 2.6.32 kernel for N950 but N900 has 2.6.37 meego kernel Aug 19 12:05:52 it can be possible Aug 19 12:06:04 maybe with some workarounds Aug 19 12:06:18 should not that much work to try out Aug 19 12:06:32 maybe the mer project has a newer kernel for the n950? Aug 19 12:07:08 maybe DocScrutinizer05 knows Aug 19 12:09:09 Mer project has also 2.6.32 for N950 Aug 19 12:10:02 * pabs3 wonders if 3.5 works on N9XX Aug 19 12:13:08 hm Aug 19 12:44:11 GNUtoo, could you tell me which panel type your new phone is ? Aug 19 12:44:59 I've no idea Aug 19 12:45:00 hi morphis Aug 19 12:45:07 GNUtoo: hi ^_^. didn't notice you were here Aug 19 12:45:36 GNUtoo: I have uart on nexus btw Aug 19 12:45:39 morphis, Alex[sp3dev] with paulk we made the samsung-ril+libsamsung-ipc work under galaxy nexus: Aug 19 12:45:44 wow Aug 19 12:46:04 basically we just tried it, made some very small patches and remounted /factory rw Aug 19 12:46:05 and it worked Aug 19 12:46:22 basically without srs it works Aug 19 12:46:24 GNUtoo: I used the 523K (actually 540K) resistor. fiq debugger works, and if i reboot with uart connected, i can see xloader debug Aug 19 12:46:27 even with sound Aug 19 12:46:29 ok Aug 19 12:46:34 wow Aug 19 12:46:39 can you paste the logs? Aug 19 12:47:05 GNUtoo: srs actually works, if you use my branches. note that the a. library name and b. socket options differ from gingerbread Aug 19 12:47:13 GNUtoo: ok, there's nothing interesting though Aug 19 12:47:35 yes but the strange thing is that it works without Aug 19 12:47:58 GNUtoo: heyho Aug 19 12:47:58 let me find the mail Aug 19 12:48:14 morphis, we need to integrate maguro/tuna in fsogsmd Aug 19 12:48:25 yes Aug 19 12:48:35 GNUtoo, can you get some info from /sys/class/graphics/fb0/ Aug 19 12:48:40 should be not that much work Aug 19 12:49:02 because it's in libsamsung-ipc but according to paulk some stuff need to be overwritten for fsogsmd Aug 19 12:49:17 basically we need to do lowlevel_tuna Aug 19 12:49:19 GNUtoo: I'll do some work on samsung-ril next week. I want to A) make some fixes so that we can build and use it on both gb/ics/jb and B) clean up the code. Hope paulk can merge it. Too bad his recent gprs changes don't work on ics Aug 19 12:49:21 for the modem Aug 19 12:49:39 Alex[sp3dev], really? we tried gprs yesterday Aug 19 12:49:44 and it worked Aug 19 12:49:45 GNUtoo: here are the uart logs. sorry, no samsung bootloader log - I'm using uboot after xloader http://pastebin.com/bprsmehz Aug 19 12:49:56 under cyanogenmod + samsung-ril and libsamsung-ipc Aug 19 12:50:00 GNUtoo: if you use my branch, it works, but paulk's recent code doesn't Aug 19 12:50:12 I didn't use your branch I think Aug 19 12:50:14 let me look Aug 19 12:51:15 1628980f6a5aca6ed427cc7d56cb0d5b318a9c4e + 1 commit Aug 19 12:51:24 in libsamsung-ipc Aug 19 12:51:52 017755f3a71d25db103027c2a11c4d96d490bef5 for samsung-ril Aug 19 12:52:50 GNUtoo: ok. still there are some changes. I will prepare patches for our 'upstream' libsamsung-ipc but for my project I'll be using the older version because it works fine. Aug 19 12:53:05 for what device Aug 19 12:53:14 because I sent 2 patches to replicant ml Aug 19 12:53:20 btw, on jellybean the ril has changed a bit so we need to fake ril library version and change status codes Aug 19 12:53:23 and with that + the remount everything worked Aug 19 12:53:29 ok Aug 19 12:53:49 GNUtoo: I need to catch up with a lot of different things first before I can start to work Aug 19 12:53:54 ok Aug 19 12:53:55 got my galaxy nexus yesterday Aug 19 12:54:00 it works quite fine Aug 19 12:54:03 GNUtoo: ok, I'll just take the latest git revision and work from that. Don't like the idea of mailing list when all the developers talk here on irc every day Aug 19 12:54:03 can you merge 2 patches Aug 19 12:54:17 and the display is very,very nice Aug 19 12:54:22 yes Aug 19 12:54:27 morphis: I have quite the opposite opinion Aug 19 12:54:42 hate that checked pattern especially on small fonts Aug 19 12:54:43 it's better than my nexus s Aug 19 12:54:49 Alex[sp3dev], there is no git-send-irc Aug 19 12:55:02 http://lists.osuosl.org/pipermail/replicant/Week-of-Mon-20120813/subject.html Aug 19 12:55:33 morphis, we worked a bit on GPS too Aug 19 12:55:49 it's SIRF indeed, there is start frame and stop frames of SIRF Aug 19 12:55:58 GNUtoo: hmm. if I change build fingerprint in build.prop, do I need to wipe cache or it won't work either way? Aug 19 12:56:12 GNUtoo: it can work with gpsd? Aug 19 12:56:37 morphis, not yet Aug 19 12:56:47 we tried that and got that: Aug 19 12:57:04 http://pastie.org/private/7l1gshs6dzur8flly6u9q Aug 19 12:57:15 morphis, you're back? Aug 19 12:57:16 GNUtoo: you probably need to upload FW. I would recommend to consult the protocol specification Aug 19 12:57:39 Alex[sp3dev], yes we do, I tried an activator + chrooted gpsd Aug 19 12:58:09 GNUtoo: yes Aug 19 12:58:40 GNUtoo: http://www.mt-system.ru/sites/default/files/docs/documents/sim18%20module%20osp%20manual%20(cs-129291-dc-8)[1].pdf in case you haven't seen, here's the protocol datasheet Aug 19 12:59:07 I have SIRF manual too Aug 19 12:59:18 GNUtoo: gpsd has SIRF support? Aug 19 12:59:20 but I didn't read it all yet Aug 19 12:59:21 yes Aug 19 12:59:32 but like ubx it has an issue on galaxy nexus Aug 19 12:59:42 gpsd:UNK: 00000016: character '`' [60], new state: GROUND_STATE Aug 19 12:59:59 that means that the parser reset itself to another state Aug 19 13:00:06 and stop parsing SIRF Aug 19 13:00:27 it's a state machine obviously Aug 19 13:00:31 so it goes in a bad state Aug 19 13:00:38 I should look at the length Aug 19 13:00:48 altough SIRF works for gta04 Aug 19 13:00:55 and we have a problem with UBX on gta02 too Aug 19 13:01:01 so I'm deep into GPS right now Aug 19 13:01:34 for galaxy nexus [a0] [a2] [...] [b0] [b3] seem correct Aug 19 13:01:40 but I didn't look at the content yet Aug 19 13:02:33 GNUtoo: ok, so in the end we will have a patch for gpsd which implements the needed quirk for the galaxy nexus Aug 19 13:03:02 yes Aug 19 13:03:16 we will also need to reverse the bootup protocol Aug 19 13:03:28 basically the "send the firmware to the GPS chip bootloader" Aug 19 13:03:32 but it shouldn't be too hard Aug 19 13:03:40 with strace it's doable Aug 19 13:04:03 GNUtoo: even more, you have the datasheet and the so library which you can disassemble Aug 19 13:04:51 thanks for the documentation, I had an old one Aug 19 13:04:52 SiRF_Binary_Protocol.pdf Aug 19 13:05:00 yes Aug 19 13:05:04 but strace is better Aug 19 13:05:22 and we even have crespo-gps-utils Aug 19 13:05:26 written by paulk Aug 19 13:05:29 which is very similar Aug 19 13:05:34 not really. it's always nice to know what some magic value means Aug 19 13:05:39 ah ok Aug 19 13:05:43 for instance we have that: Aug 19 13:06:08 http://redmine.replicant.us/projects/replicant/wiki/GSD4t Aug 19 13:06:19 termios.c_cflag = 0x800018b2; Aug 19 13:06:26 I don't know what theses flags mean Aug 19 13:06:36 it's a mask obviously Aug 19 13:06:43 but what's 0x80000000 Aug 19 13:07:13 termios.h includes bits/termios.h Aug 19 13:07:15 or something like that Aug 19 13:07:32 GNUtoo: see PM Aug 19 13:07:36 and I didn't see such big numbers Aug 19 13:08:27 GNUtoo: baud rate? Aug 19 13:08:54 well, no Aug 19 13:08:58 # define CRTSCTS 020000000000 Aug 19 13:09:13 that's hardware flow control Aug 19 13:10:11 ok Aug 19 13:10:39 and what's 18b2? Aug 19 13:10:39 thanks a lot!!!! Aug 19 13:11:16 GNUtoo: hm. I thought strace can decode posix constants by itself Aug 19 13:11:42 with the -v key Aug 19 13:11:56 ah ok Aug 19 13:12:03 maybe not cm's strace then Aug 19 13:12:18 because I did -v Aug 19 13:16:56 GNUtoo: 18b2 is CS8 | CREAD | CLOCAL | B115200 Aug 19 13:17:14 thanks a lot Aug 19 13:17:24 115200? Aug 19 13:17:25 strange Aug 19 13:21:31 Hi GNUtoo, I still have ssh problem Aug 19 13:21:50 this is dmesg http://pastebin.com/SvwatJvn Aug 19 13:23:00 Waraqa, yes I fiixed a problem in SHR but it takes time to come to the images.... Aug 19 13:23:09 so try what I suggested: Aug 19 13:23:19 ifup -f usb0 in the end of the script that setup usbnet Aug 19 13:23:47 g_ether.sh Aug 19 13:24:00 if that doen't work check your usb cable and your setup Aug 19 13:24:00 GNUtoo: Where is this this file ? Aug 19 13:24:34 find / -name "g_ether.sh" Aug 19 13:24:49 Ok Aug 19 15:26:04 GNUtoo: Does the script launch while booting ? Aug 19 15:26:12 yes Aug 19 15:26:14 trough systemd Aug 19 15:28:45 This means I have different problem Aug 19 15:29:16 because I get the same result when I type: ifup usb0 Aug 19 15:35:41 GNUtoo: ssh is working in OM2007 so usb cable is fine Aug 19 15:36:16 Waraqa, is your usbnet setup ok? Aug 19 15:36:27 did it ever work in SHR for you? Aug 19 15:36:35 because the phone IP is 192.168.7.2 Aug 19 15:36:47 I'm aware Aug 19 15:36:48 and your usb0 ip on laptop should be 192.168.7.1 Aug 19 15:37:07 and you asked me to try to ping Aug 19 15:37:08 so if you setup network manager or /etc/network/interfaces for the other ip it may conflict somehow Aug 19 15:37:12 yes and it failed Aug 19 15:38:08 you mean the configuration on my pc Aug 19 15:38:16 yes Aug 19 15:38:25 Yes it is OK Aug 19 15:38:51 I put the new ip as you said Aug 19 15:39:05 Why everything is permession denied http://paste.ubuntu.com/1151143/ ? Aug 19 15:40:23 Do I need to set something in SHR ? Aug 19 15:40:35 that's on target? Aug 19 15:40:50 ah I remember now Aug 19 15:40:53 you gave me dmesg Aug 19 15:40:58 it contained no glamo issues Aug 19 15:41:24 What does this mean ? Aug 19 15:43:54 sometimes some microsd have some issues Aug 19 15:44:25 I suffered a lot to be able to boot from this microsd Aug 19 15:44:59 even now, sometimes it won't boot Aug 19 15:46:25 There are also some errors while booting like: (Failed to start LSB: GPS...) Aug 19 15:49:47 GNUtoo: All dialogs in settings doesn't open Aug 19 15:50:25 When I launch it from terminal I can see an error related to dbus Aug 19 15:52:45 Will SHR one day work perfectly on GTA02 ? Aug 19 15:58:08 Waraqa, can you paste dmesg again Aug 19 15:58:10 like from when it doesn't work Aug 19 15:58:17 the issue is not SHR Aug 19 15:58:29 it's the hardware and/or the kernel driver for the chip named glamo Aug 19 15:59:22 GNUtoo: If I buy a new microsd will the problem be solved Aug 19 16:00:00 Waraqa, did you try the default freerunner 512M microsd? Aug 19 16:00:14 because the problem with buying a new microsd is that you don't know if it will be supported Aug 19 16:00:34 else there is a workarround: using the NAND Aug 19 16:00:46 I did not get a microsd with freerunner ? Aug 19 16:00:47 and microsd for media storage Aug 19 16:01:04 I did, usually they came with 512M microsd Aug 19 16:01:55 and I don't want to overwrite nand because om2007 is working better than others Aug 19 16:02:21 What's the brand of your microsd ? Aug 19 16:04:06 You said that my dmesg didn't contained glamo issues. Aug 19 16:04:41 Can I conclude that it is not a glamo bug ? Aug 19 16:13:34 reformat your microsd Aug 19 16:13:37 and reinstall Aug 19 16:13:59 don't forget the --numeric-owner Aug 19 16:14:03 and then boot Aug 19 16:14:06 and give me dmesg Aug 19 16:14:24 and try the ifdown and ifup.... Aug 19 16:14:29 I formatted it last week Aug 19 16:14:47 What filesystem is preferred ? Aug 19 16:15:45 I used mkfs.ext3 Aug 19 16:15:55 yes Aug 19 16:15:58 ext3 is fine Aug 19 16:16:18 I'll do it now Aug 19 16:16:26 ok nice Aug 19 16:22:31 I'm using -c option to check for bad sectors :) Aug 19 16:57:32 Waraqa, ok Aug 19 17:09:39 GNUtoo: I downloaded shr 88 Aug 19 17:09:43 a lot of booting errors Aug 19 17:09:52 ok Aug 19 17:09:55 dmesg ? Aug 19 17:10:07 it doesn't boot Aug 19 17:10:27 it keeps repeating booting messages Aug 19 17:10:47 can I find dmesg in a files Aug 19 17:11:53 In linux I can find it in /var/boot/messages Aug 19 17:12:19 But in shr it's not available Aug 19 17:12:34 Where can I get it from ? Aug 19 17:13:14 oh sorry, in my pc it's in /var/log/messages Aug 19 17:14:00 GNUtoo: Is it available in a file ? Aug 19 17:14:31 I don't think so Aug 19 17:14:36 but maybe in /var/log Aug 19 17:14:50 otherwise, I will go back to 85 Aug 19 17:17:57 There is newer verison 90 Aug 19 17:20:03 nothing in /var/log Aug 19 17:21:05 GNUtoo: Do I go back to 85 or get the newest 90 ? Aug 19 17:21:34 hmmm try 90 but I don't think the issue is the image itself Aug 19 17:21:50 it's rather a microsd compatibility problem because of this glamo chip.... Aug 19 17:22:01 do you have differents microsd? Aug 19 17:22:07 I wonder why there is no md5sum info ? Aug 19 17:22:15 no, only one Aug 19 17:23:07 I will try to purchase a new microsd Aug 19 17:23:41 Can I get more than 2 gb ? Aug 19 17:24:31 GNUtoo: or there are still microsdhc compatibility issues ? Aug 19 17:25:00 Waraqa, it's luck based Aug 19 17:25:09 if you purchase a new one it may be the same Aug 19 17:25:13 or work better Aug 19 17:25:16 you can't know before Aug 19 17:25:42 I want to buy a tested brand and size Aug 19 17:25:50 ok then look at the wiki Aug 19 17:25:57 but the wiki page is old.... Aug 19 17:26:14 but if you can get a dmesg Aug 19 17:26:21 I can help you workarround the issue Aug 19 17:26:25 aha Aug 19 17:26:39 I'm downloading 90 now Aug 19 17:26:41 ok Aug 19 17:26:47 do you have the debug board? Aug 19 17:26:54 because if so it's easy to get dmesg Aug 19 17:27:00 no :( Aug 19 17:27:21 hmmm Aug 19 17:27:45 If I take a photo for booting messages will it be useful ? Aug 19 17:28:09 yes Aug 19 17:28:27 try to capture the early kernel messages Aug 19 17:28:35 Ok Aug 19 17:28:38 specially if there are microsd errors Aug 19 17:28:42 or similar stuff Aug 19 17:32:12 GNUtoo: I need to tell you that I'm using glamo_mci.sd_max_clk=5000000 in the bootloader Aug 19 17:32:22 ok Aug 19 17:32:27 so you uses uboot? Aug 19 17:32:32 yes Aug 19 17:32:36 ok Aug 19 17:32:39 did you try QI? Aug 19 17:32:53 not Aug 19 17:32:59 ok Aug 19 17:33:36 I'm using uboot, because I'm not sure how to configure QI if I install it Aug 19 17:33:41 personally I use 2M with hacked-QI for my freerunner and my 32G card Aug 19 17:34:04 you can't....unless you modify the source code and recompile it Aug 19 17:34:23 without 5M does it work Aug 19 17:34:23 ? Aug 19 17:34:26 oh, it's scaring Aug 19 17:34:44 without 5m option, it never boots Aug 19 17:35:24 ok Aug 19 17:35:29 did you try lower stuff Aug 19 17:35:31 I'm using gena2x uboot Aug 19 17:35:31 such as 2M Aug 19 17:35:35 or higher stuff? Aug 19 17:36:06 before I was using lower number Aug 19 17:36:11 can you try to save the content of your NAND? Aug 19 17:36:18 but sometime, it doesn't boot Aug 19 17:37:22 You want me to install SHR on Nand ? Aug 19 17:44:14 yes so you could get a dmesg Aug 19 17:44:14 of the microsd Aug 19 17:44:23 else you need an image that is on RAM Aug 19 17:44:41 *fits on RAM Aug 19 17:44:45 and we don't have one Aug 19 17:56:49 GNUtoo: This one is better Aug 19 17:56:56 ok Aug 19 17:56:57 Now I can ping freerunner Aug 19 17:57:07 try to ssh inside it Aug 19 17:57:22 after doing ifup -f usb0 Aug 19 17:57:26 on the freerunner Aug 19 18:03:03 error dialog: Enlightenment has had an error while wiriting its config file. The file is not writable. Perhaps the disk is ... of you lost permessionss to your file. The file where the error occured was /home/root/.e/e/config/illume2-shr/exehist.. The file has been deleted to avoid corruption Aug 19 18:03:14 Alex[sp3dev], hi Aug 19 18:03:29 the disk is probably ro Aug 19 18:03:42 that happens automatically with errors in the fileysstem Aug 19 18:04:00 How to fix it ? Aug 19 18:04:22 try to get a dmesg first Aug 19 18:04:48 Alex[sp3dev], how does the tuna camera works? Aug 19 18:04:50 ok Aug 19 18:05:02 Alex[sp3dev], I see no /dev/video* Aug 19 18:05:17 Waraqa, basically I think the best thing to do is to find the right glamo parameter Aug 19 18:05:25 the glamo_mci.sd_max_clk= Aug 19 18:05:45 GNUtoo: hi Aug 19 18:06:23 It seems that there is no xterm in this release Aug 19 18:06:25 GNUtoo: a proprietary fw (ducatti-m3.bin) is loaded to the DSP. then you can get camera data via the 'tiler' device which is basically an interface to the dsp. no v4l2 so far Aug 19 18:06:41 Why did they remove it ? Aug 19 18:08:13 I can't use terminal because of fonts problem and can't fix it because I don't have access to shell Aug 19 18:09:42 GNUtoo: How to determine the right glamo parameter ? Aug 19 18:10:10 earlier, I find this value is the best and always working Aug 19 18:10:41 ok Aug 19 18:10:52 bbs Aug 19 18:34:27 morphis: saw you're working on ofono. it's great but could you please avoid touching ipc and power from custom code and rely entirely on libsamsung-ipc like android ril? Aug 19 18:36:46 morphis: oh, modem manager is really cute :) Aug 19 18:40:00 GNUtoo: you should use this repository for samsung ril client. it has tuna_ics and tuna (jb) branches. that fixes SRS and adds dummy callbacks for NFC and GPS https://gitorious.org/~ast/replicant/asts-hardware_ril_samsung-ril-client Aug 19 18:42:18 ok Aug 19 18:42:31 Alex[sp3dev], is there something GNU/Linux that is able to use titler? Aug 19 18:42:50 like gstreamer plugin Aug 19 18:42:54 or something like that Aug 19 18:43:17 and is there a replacement firmware? Aug 19 18:43:22 GNUtoo: no and no Aug 19 18:43:46 ok ouch Aug 19 18:44:40 it should not be hard to write a gst plugin. dsp firmware is harder. like, it should be possible to build a custom image for both cortex m3 and c6000 dsp, but IVA, camera i2c, sensor drivers etc are a dark area Aug 19 18:46:01 GNUtoo: besides, I think it is not a good idea any way. we have an unknown code in the trustzone hypervisor, DSP can set up IOMMU. no security at all. omap4 is not a secure platform from the user's point of view. it's only secure for the OEM Aug 19 18:46:19 ok Aug 19 18:47:31 GNUtoo: I think it's better to develop the middleware (gsm stack, camera apps etc) with drivers relying on any closed firmware because reimplementing firmware will take long time and if we have the middleware, we can just switch to a more open platform later (exynos or something entirely new) Aug 19 18:47:50 ok Aug 19 18:47:59 there are stuff better than galaxy nexus? Aug 19 18:48:06 apart the sgs2 of course Aug 19 18:48:37 GNUtoo: huh. sgs2 is better (no pentile, proper v4l2). apart from it - i dunno. maybe sgs3. Aug 19 18:48:53 ok Aug 19 18:49:00 and not-signed stuff Aug 19 18:49:23 GNUtoo: right now I think we should concentrate on merging samsung ril and implementing gps for sirf4. and try porting meego camera, for example. or at least fixing v4l2 on sgs2 and nexus s Aug 19 18:49:33 ok Aug 19 18:49:51 about GPS I've tried stuff Aug 19 18:49:55 here's what I found: Aug 19 18:50:08 http://redmine.replicant.us/projects/replicant/wiki/GSD4t Aug 19 18:50:10 I have ubuntu working on sgs2. wifi just works out of the box with the dhd.ko and the module param for the firmware Aug 19 18:50:39 GNUtoo: so if you add fsogsmd support for gnex, I think adding sgs2 to fso is just a matter of alsa configs and kernel recipes Aug 19 18:52:46 ok Aug 19 18:54:34 Alex[sp3dev]: what do you mean by "avoid IPC and power from custom code"? Aug 19 18:56:34 GNUtoo: The disk is ro. How to change it ? Aug 19 18:56:57 Waraqa, mount -o remount,rw / Aug 19 18:57:26 morphis: I mean, not to open ipc sockets and do power ioctl from ofono/fsogsmd side, but rely on libsamsung-ipc so that all devices can be supported. I see that you're doing it right with modem manager. It would be also nice if ipc version could be detected at runtime Aug 19 18:58:06 Alex[sp3dev]: ah yes, I will do this Aug 19 18:58:20 GNUtoo: mount: special device rootfs does not exist Aug 19 18:58:43 morphis: thank you for your work on maintaining libsamsung-ipc Aug 19 18:58:47 Waraqa, hmmm, what is mounted at / Aug 19 18:59:49 GNUtoo: rootfs Aug 19 19:00:04 GNUtoo: rootfs on / type rootfs (rw) Aug 19 19:00:12 mount -o remount,rw /dev/mmcblk0p1 / Aug 19 19:01:03 GNUtoo: but in /dev/mmcblk0p1 there is only kernel. other folders are in /dev/mmcblk0p2 Aug 19 19:01:17 ah? Aug 19 19:01:21 ah you use uboot Aug 19 19:01:23 ok Aug 19 19:01:29 then /dev/mmcblk0p2 Aug 19 19:01:34 ok Aug 19 19:03:29 GNUtoo: mount: you must specify the filesystem type Aug 19 19:03:40 -t ext3 then Aug 19 19:05:10 mount: cannot remount block device /dev/mmcblk0p2 read-write, is write-protected Aug 19 19:05:19 Alex[sp3dev], what about that: http://omappedia.org/wiki/DistributedCodecEngine#Build_DCE Aug 19 19:06:39 Waraqa, maybe do that Aug 19 19:06:46 Waraqa, do you have ssh? Aug 19 19:06:50 if so try that: Aug 19 19:06:54 mount the NAND Aug 19 19:06:58 "/dev/mmcblk0p2 is mounted at /media/mmcblk0p2 (ro,relatime,errors-continue,barr)" Aug 19 19:06:59 and write the dmesg there Aug 19 19:07:27 GNUtoo: need to look at it, but guess it contains no camera stuff. as for codecs - neon should give you enough power. It might be interesting to investigate whether we can use hardware blitting (like, omapfb) Aug 19 19:07:44 ok Aug 19 19:07:55 What is nand name in /dev/ Aug 19 19:08:37 one thing I must definitely try is running meego with pandaboard opengl blobs. too bad there's no free opengl es driver for arm yet. even llvmpipe is broken (actually, arm jit). Aug 19 19:09:41 I heard freedreno is making huge progress with opengl for qualcomm. but qualcomm is a swear word around here Aug 19 19:10:24 http://omappedia.org/wiki/GST_build Aug 19 19:10:41 indeed Aug 19 19:11:01 GNUtoo: so it supports tiler? Aug 19 19:11:14 I'll try it Aug 19 19:11:15 GNUtoo: ssh connection could not be established because it needs to create some file and it's ro. but I will try to mount nand if you give its node name in /dev Aug 19 19:11:26 Waraqa, ok that's what I feared Aug 19 19:11:39 I feared that it remounted ro before the creation of ssh keys Aug 19 19:11:57 maybe Aug 19 19:12:01 Waraqa, cat /proc/mtd should give you the NAND layout Aug 19 19:12:26 when I try to access ssh from pc I get: ssh_exchange_identification: Connection closed by remote host Aug 19 19:13:28