**** BEGIN LOGGING AT Thu Dec 13 02:59:58 2012 Dec 14 01:03:53 hello. i'd like to give shr a try on my gta04. got the "stable" image booting but the initial config breaks and i'm stuck in an over-sized module-settings dialog.. and i can't seem to find a recent "testing" image.. Dec 14 01:04:11 is this a good time to try this at all? and if so, which image should i use? Dec 14 01:06:05 mhanne_, a lot of folks who work on this are sleeping right now...hang around. Dec 14 01:06:16 quite a few will start showing up in about 4hrs Dec 14 01:07:05 ok, will do, thanks :) **** ENDING LOGGING AT Fri Dec 14 02:59:35 2012 **** BEGIN LOGGING AT Fri Dec 14 03:00:19 2012 Dec 14 10:40:53 My friend has a problem, he want to change camera in android, the camera has had driver in linux and board file also contain it, but does he need to do some thing in android Dec 14 11:26:57 mhanne_ I have seen the 'oversized module-settings dialog' issue before. If you have installed on sd, access the SD card from a computer and rm -rf /home/root/.e, then put it back in the phone and boot again. Dec 14 11:28:37 what's 'oversized module-settings dialog'? Dec 14 11:36:13 jeepingben: cool, thanks :) Dec 14 11:37:14 JaMa: after first boot, something crashes and the module-settings dialog appears, only it is bigger than the screen so you can't close it or anything Dec 14 11:37:21 Jama, sometimes on a fresh install the e-setup wizard doesn't start/crashes (can't remember which). I thought it had been reported so I didn't bring it up. Dec 14 11:42:02 mhanne: and what do you mean by stable image? Dec 14 11:42:51 jeepingben: and it does show module-settings dialog? I think I haven't seen this bug Dec 14 11:43:30 http://trac.shr-project.org/trac/wiki/Devices/GTA04/InstallGuide "latest stable image" from here Dec 14 11:43:58 and the link to the "staging" image is broken Dec 14 11:44:07 hmm that should work Dec 14 11:44:59 "staging" link is sometimes broken (not every staging has images, current latest is without images) Dec 14 11:45:20 Jama, I think it does. It definitely starts E with everything huge and desktop-like. There can be multiple windows on the screen, they have top bars and can be dragged around. Dec 14 11:46:32 maybe it was because i got a little impatient and poked the screen and power button at some point.. i'll try it again later Dec 14 11:47:34 jeepingben: ah so it's probably before 1st time wizard sets profile Dec 14 11:48:00 fwiw: E17 has much better 1st time wizard now Dec 14 11:48:13 but that's only in shr branches, not even in staging feeds Dec 14 11:49:17 That is good. I am being careful about upgrading so not to break my HW audio routing. Dec 14 12:19:53 ok, first the touchscreen calibration appeared, then i logged in via ssh, but by the time i was in, the display went blank. after touching it and opening the lock screen, there's the "you disabled screensaver too fast" error/dialog and behind that the oversized module settings Dec 14 12:22:28 btw. i also formatted my sdcard differently than in the install guide, p1 fat for /boot and p2 ext3 for the rest.. couldn't get it to boot otherwise.. Dec 14 16:48:02 mhanne: it's unclear which support you get with uBoot - whether it's FAT only, or ext with inode size 128 or with inode size 256. Dec 14 16:49:11 on gta01 originally uBoot was able to load kernel from ext2 afaik. Then mkfs.ext2 changed to default inode size 256 which broke uBoot ext support Dec 14 16:50:08 since probably nobody knew the root cause back when, the best practice changed to kepping /boot on a FAT partition Dec 14 16:50:24 S/kepp/keep/. Dec 14 16:51:15 much later other uBoot builds appeared, both with inode256 support and with no ext support at all **** ENDING LOGGING AT Sat Dec 15 02:59:58 2012