**** BEGIN LOGGING AT Wed Feb 17 02:59:58 2010 Feb 17 05:31:38 hi, what's the best way to pre-set the internal speaker and internal mic volume in SHR for calls with Dialer? On my current unstable, it doesn't save the volume settings. Have checked volume settings as per manual and all look ok. Feb 17 06:00:48 figured it out, the volume is saved if you set it using alsamixer Feb 17 10:32:34 DocScrutinizer, PaulFertser: hello; not sure if you remember me, I'm the guy who had problem with crosstalk of left audio channel on FR to both channels... Feb 17 10:32:57 (it's not yet fixed, but at least I have a torx screwdriver now) Feb 17 14:43:04 hi there Feb 17 14:43:13 does anybody have a go!cam for psp? Feb 17 16:32:08 ping radekp Feb 17 17:16:20 mmp: hi Feb 17 17:16:29 PaulFertser: hello Feb 17 17:18:43 PaulFertser: I measured some things on my the jack, but left and right path it did not seem to be crossed.. Feb 17 17:18:55 (if you remember the case) Feb 17 17:19:01 Yeah Feb 17 17:19:15 And yet it behaves strangely Feb 17 17:19:28 I'm too tired to think about it atm... Feb 17 17:39:08 what is the GPS /dev/tty on the FR? Feb 17 17:46:40 /dev/tyyS0? Feb 17 17:46:50 ttySAC1 IIRC Feb 17 17:46:51 /dev/tty/S0? Feb 17 17:46:54 it's been a while thpough Feb 17 18:05:21 SAC1 Feb 17 18:32:29 I would like to write a little patch in puredata (-nogui, terminal command, bash launching), to takes output from the /dev/ttySAC1 and to send it on a sever via wifi with: GPS coordinates and samplers of recorded sounds (10s of recording) each 10 min. Feb 17 18:34:16 What are the usual outputs of a GPS, in which form? Feb 17 18:44:07 Hello , how to record voice on shr-t ? Feb 17 19:04:07 alabd: you should see on opkg.org >audio Feb 17 19:06:51 cosmos: http://www.opkg.org/package_288.html will it be installed on fr ? Feb 17 19:08:03 aladb: you mean py-mixer? Feb 17 19:08:08 yes Feb 17 19:08:11 type: opkg install http://www.opkg.org/packages/pymixer_1.0_noarch.ipk Feb 17 19:08:56 look also if dependencies are needed Feb 17 19:17:23 there are .ipk packages for shr-t and shr-U Feb 17 20:19:45 thanks god peace you bye Feb 17 21:17:51 could someone help me? I seem to only be able to boot with nor Feb 17 21:18:06 both qi and uboot don't work Feb 17 21:18:59 did you definitely get the version of Qi for the right SoC and filesystem? Feb 17 21:19:12 yup Feb 17 21:19:22 in qi, all I get is aux blinking and a blank screen Feb 17 21:19:38 what I get in u-boot is remnants of nor text Feb 17 21:20:06 I even tried long power press but no verbose (nothing) in qi Feb 17 21:21:22 which kernel? Feb 17 21:22:37 http://build.shr-project.org/shr-unstable/images/om-gta02/uImage-om-gta02-latest.bin Feb 17 21:23:47 but booting from NOR works? Feb 17 21:25:34 yes Feb 17 21:27:34 what do you mean by "remnants of nor text"? Feb 17 21:27:48 let me upload a snapshot Feb 17 21:27:49 one sec Feb 17 21:28:29 is there a website like pastebin but for files? Feb 17 21:35:30 Weiss: http://www.facebook.com/album.php?aid=148165&id=718588721&l=00f3a7eb2c Feb 17 21:38:09 interesting.. something's really screwed up Feb 17 21:38:24 it says "poweroff" at the upper left Feb 17 21:38:42 did you notice the color-pixeled lines in the middle? Feb 17 21:38:54 that's in u0boot, btw Feb 17 21:39:03 *u-boot Feb 17 21:40:25 w/qi it's just a blank screen Feb 17 21:41:26 I'm gonna take note of the aux-led/vib sequence Feb 17 21:44:10 Weiss: what does one short, one long aux orange led, but no vibration mean? Feb 17 21:44:24 (both aux blinks are orange) Feb 17 21:46:25 no idea.. (didn't even realise AUX could go orange) Feb 17 21:47:54 or red Feb 17 21:47:56 whatever Feb 17 21:48:19 ah Feb 17 21:49:38 one short one long Feb 17 21:49:42 any ideas, people? Feb 17 21:52:00 Qi LED codes are on the Wiki somewhere, but I don't know them offhand Feb 17 21:53:49 http://wiki.openmoko.org/wiki/Qi#LED_and_Vibrator_Signals Feb 17 21:53:52 no reference Feb 17 21:53:54 right there at http://wiki.openmoko.org/wiki/Qi#LED_and_Vibrator_Signals Feb 17 21:54:08 Wonka: first! Feb 17 21:54:11 aaargh, seconds too slow Feb 17 21:55:10 man. thank god for nor Feb 17 21:55:18 otherwise my fr would be bricked Feb 17 21:55:47 no debug board I guess? Feb 17 21:55:53 nah Feb 17 21:55:59 might as well get one sometime Feb 17 21:58:54 with Qi, I get one shortish flash, one very short flicker, then a longer flash as it loads the kernel Feb 17 21:59:02 wow, the original Halloween movie is really creepy Feb 17 21:59:54 well, with me, just one short and one long Feb 17 22:00:01 no activity on screen Feb 17 22:00:02 nutin Feb 17 22:02:41 omg, is J.L. Curtis hot in it too Feb 17 22:17:29 how do I get the fr to be recognized as /dev/ttyACM0? Feb 17 22:17:34 under nor Feb 17 22:18:39 I'm trying to get u-boot to work using http://wiki.openmoko.org/index.php?title=U-Boot&redirect=no#What_if_I_borked_my_bootloader_environment_and_don.27t_get_a_prompt_anymore.3F Feb 17 22:19:08 but I still get an error Feb 17 22:19:23 CRC error: expected 0x903a1b39, got 0xffffffff Feb 17 22:44:26 did someone tried to flash bootloader with openmoko flasher on mac os x? Feb 17 23:02:56 "badcloud" all is well? Feb 18 02:18:12 QtMokos kernels are not supported under Qemu emulation of the FR Feb 18 02:19:23 How do I can compile a software then? Using the FR for 3 days to make the job? Feb 18 02:44:15 Well, look at that......Morning, all. Feb 18 02:54:41 Anyone? **** ENDING LOGGING AT Thu Feb 18 02:59:57 2010