**** BEGIN LOGGING AT Thu Aug 06 02:59:57 2009
Aug 06 04:22:51 <tinker-f595> debio264: if you do not know what you are doing and have messed up your settings it is better to get back to a known state then experiment carefully with the settings and read the documentation
Aug 06 04:23:08 <debio264> well
Aug 06 04:23:19 <debio264> I did get the installer working
Aug 06 04:23:29 <debio264> and I used it to install my custom installation
Aug 06 04:23:37 <debio264> and I now have Arch Linux running on a Sheevaplug
Aug 06 04:24:21 <tinker-f595> cool
Aug 06 04:24:34 <tinker-f595> what was inhibiting the installer
Aug 06 04:24:48 <debio264> cbxbiker made a post about it earlier in the installer thread
Aug 06 04:24:57 <debio264> the latest batch of Sheevaplugs had a different vendor ID
Aug 06 04:25:02 <tinker-f595> I'll lool when I finish working...
Aug 06 04:25:23 <tinker-f595> have a rush job that I need to finish up in the wee hours
Aug 06 04:25:27 <debio264> ah
Aug 06 04:25:51 <tinker-f595> just having a quick dinner break
Aug 06 04:26:06 <debio264> I had to change the USB vendor IDs in interface.cfg to get OpenOCD to recognize the plug
Aug 06 04:26:20 <debio264> from there, it was fairly straightforward
Aug 06 04:26:50 <debio264> and the only thing I really have left is putting in a few temporary filesystems so logging and whatnot doesn't kill the flash memory
Aug 06 04:27:37 <tinker-f595> did you remember to put your mac address in it?
Aug 06 04:28:00 <debio264> well
Aug 06 04:28:03 <debio264> I almost did
Aug 06 04:28:08 <tinker-f595> ?
Aug 06 04:28:10 <debio264> but I was in a hurry at the time
Aug 06 04:28:21 <debio264> I had to go somewhere right after I started the install
Aug 06 04:28:27 <tinker-f595> did you fix it?
Aug 06 04:28:29 <debio264> so I just figured I would set it from U-Boot later
Aug 06 04:28:31 <debio264> not yet
Aug 06 04:28:32 <tinker-f595> fix the mac address
Aug 06 04:29:10 <tinker-f595> I find it interesting the mac address is not burned in permanently
Aug 06 04:29:22 <debio264> yea
Aug 06 04:29:56 <debio264> although I think the other ARM embedded device I've worked on was the same way
Aug 06 04:30:06 <debio264> I don't really remember though
Aug 06 04:30:28 <tinker-f595> have to ask someone I know with a BB if that is true of the OMAP
Aug 06 05:52:04 <coil> gotta get that obsd on it
Aug 06 06:46:03 <lool> debio264: Hmm is this reported in openocd's upstream?
Aug 06 06:46:22 <lool> (new USB ids)
Aug 06 07:37:20 <BlixaWillBargeld> yeah :-) my sheeva plug was shipped today :-)
Aug 06 08:00:23 <tinker-f595> lool: you need to let it know the device ids for the specific device you are working with. Normal behavior
Aug 06 08:01:18 <tinker-f595> Other wise it has no way of knowing which device you intended to flash
Aug 06 08:18:22 <lool> tinker-f595: I understand but I'd like to get that shipped in the upstream openocd files
Aug 06 08:19:19 <lool> tinker-f595: /usr/share/openocd/scripts/interface/sheevaplug.cfg is shipped in the Debian package and I'd like to fix that for Debian/Ubuntu users
Aug 06 08:19:35 <lool> I guess it's this line:
Aug 06 08:19:35 <lool> ft2232_vid_pid 0x9e88 0x9e8f
Aug 06 08:29:43 <tinker-f595> well shuldn't it be fixed for all users?
Aug 06 08:30:39 <tinker-f595> not jsut for de consumers
Aug 06 08:30:45 <tinker-f595> ah tired should go to sleep
Aug 06 09:20:44 <dieter_> As far as I remember there was a discussion about integrating openrd board in openocd's upstream a few weeks ago.
Aug 06 09:20:51 <dieter_> But didn't know the current status.
Aug 06 09:24:27 <dieter_> At least in trunk there is no openrd.cfg until now (http://svn.berlios.de/wsvn/openocd/trunk/tcl/interface/#_trunk_tcl_interface_)
Aug 06 14:06:48 <dieter_> lennert: ping - please could you help me with some pci port access questions?
Aug 06 14:12:50 <dieter_> Hi - anybody familiar with PCI driver programming?
Aug 06 14:13:14 <dieter_> I want to access io ports on a PCI device and don't know what I'm doing wrong :(
Aug 06 14:14:33 <dieter_> IO memory access works fine, though.
Aug 06 15:11:52 <lennert> dieter_: they are fundamentally the same thing, but to different address spaces
Aug 06 15:12:44 <dieter_> lennert: yup - i request the ioport resource and try to ioremap which all works fine.
Aug 06 15:13:06 <dieter_> lennert: but if I try to write eihter nothing happens or my kernel crashes.
Aug 06 15:13:51 <dieter_> lennert: i have to go to a meeting in a few minutes - uugh. But I will try to write a small sample for tomorrow to illustrate what I want to do.
Aug 06 15:14:05 <dieter_> lennert: would be very nice if you can have a look?
Aug 06 15:14:18 <lennert> dieter_: maybe just post it on a forum or mailing list or so somewhere
Aug 06 15:14:21 <lennert> dieter_: i might not be around later
Aug 06 15:17:54 <dieter_> lennert: I would write to arm linux kernel mailing list, yep. Many thanks and have a nice evening!
Aug 06 15:18:19 <lennert> dieter_: ok, good luck :)
Aug 06 16:17:17 <hrw> hi
Aug 06 16:17:26 <hrw> someone here updated from 2.6.29 to 2.6.30 with rootfs on ubi?
Aug 06 17:42:47 <MarkG> Hi, does anyone know how to get transmission BT client without having to bring in X?
Aug 06 17:51:50 <e`> ubuntu and debian at least have transmission-cli and transmission-daemon packages
Aug 06 18:43:33 <MarkG> thanks. CLI running great with web UI
Aug 06 19:08:23 <christoph_debian> I'm now back to get http://plugcomputer.org/plugforum/index.php?topic=355.msg2918#msg2918 but there was no suggestion what to do now on the forum, anyone a idea?
Aug 06 19:51:18 <christoph_debian> uImage partition not being hidden is a plug-side problem right?
Aug 06 19:51:36 <christoph_debian> It would need a patch to the installer initrd?
Aug 07 01:41:40 <ron_> lool: I can send you a working config for openrd with openocd if you want one, just let me know where you want it :)
**** ENDING LOGGING AT Fri Aug 07 02:59:57 2009