**** BEGIN LOGGING AT Fri Aug 21 02:59:56 2009
Aug 21 20:28:56 <Reedy> Weird, both my sheevas are connecting at half duplex, 10 Mbps to my router
Aug 21 20:29:00 <Reedy> stupid thing
Aug 21 20:36:40 <pfein> Reedy: autoneg never seems to work, try ethtool
Aug 21 20:36:52 <Reedy> ahh
Aug 21 20:37:03 <Reedy> i didnt notice it on my other router
Aug 21 20:37:04 <pfein> (haven't played with my sheeva much yet, but we've always had that problem with our servers)
Aug 21 20:37:13 <Reedy> but ethtool eth0 says no data
Aug 21 20:37:40 <Reedy> but my router has also been a pita recently
Aug 21 20:48:48 <Reedy> Its just come up on a 10.4 ip :/
Aug 21 20:48:58 <Reedy> one thats mentioned during boot (if connected via serial)
Aug 21 22:01:15 <Reedy> SheevaPlug Installer is full of win, btw
Aug 21 22:01:17 <Reedy> :D
Aug 21 22:14:17 <Reedy> After reinstalling with the alpha 6, do we need to do any of http://plugcomputer.org/plugwiki/index.php/New_Plugger_How_To ?
Aug 21 22:15:23 <Reedy> dhcp stuff not needed
Aug 21 22:15:36 <Reedy> "The directory /var/cache/apt/archives/partial" seems to be
Aug 21 23:13:48 <max_posedon> hi! Have somebody kernel for sheevaplug, with reiserfs and jffs2 support?
Aug 21 23:14:18 <max_posedon> or may be reiserfs.ko for default 20091319 (or other) kernel?
Aug 22 00:03:04 <rektide> i cant get my rtc working... anyhwere at all. :(
Aug 22 00:03:25 <rektide> the stock install, the git marvell kernel. :/
Aug 22 01:36:05 <tinker-f595> rektide:  RTC works fine for me
Aug 22 01:56:51 <DonaldCMV_> Hello... does any one know where on the Marvell Extranet I can find the User Guide for the Kirkwood (88F6281) processor?
Aug 22 02:02:28 <tinker-f595> DonaldCMV:  what do you mean by user guide?
Aug 22 02:03:18 <DonaldCMV_> Sorry I meant the Design Guide for the processor
Aug 22 02:11:27 <rektide> THIS IS FUCKED UP
Aug 22 02:11:28 <rektide> :(
Aug 22 02:11:32 <rektide> http://groups.google.com/group/openrd/browse_thread/thread/a5233afb33708a94
Aug 22 02:11:38 <rektide> time doesnt move on the fucking OpenRD board
Aug 22 02:11:39 <rektide> FUCK
Aug 22 02:11:43 <rektide> fuck fuck fuck fuck fuck fuck fuck
Aug 22 02:11:47 <rektide> __ffuuuuccckkkk_
Aug 22 02:12:07 <rektide> damn you time, _move_
Aug 22 02:12:45 <tinker-f595> how mature of you
Aug 22 02:12:58 <rektide> i am freaking out.
Aug 22 02:13:12 <rektide> ext2/3 refuse to mount a drive which was last mounted in the future.
Aug 22 02:13:33 <rektide> and since my system boots up to 2000-1-1 every time, it always last been mounted in the future
Aug 22 02:13:59 <rektide> preventing me from booting. :(
Aug 22 02:14:43 <rektide> the reason i'm freaking out isnt because its keeping me from having a working system, its because the RTC not moving sounds more like a hardware issue than anything else.
Aug 22 02:15:01 <tinker-f595> wonder if something is broken on your board?
Aug 22 02:15:05 <rektide> yes. :(
Aug 22 02:15:40 <rektide> tinker-f595: can you paste some kind of evidence your OpenRD board has time moving?
Aug 22 02:15:52 <tinker-f595> systohc ?
Aug 22 02:16:05 <rektide> no that'll write the rtc.
Aug 22 02:16:16 <rektide> hwclock -r ; sleep 10 ; hwclock -r
Aug 22 02:16:24 <rektide> read, wait 10, read... has it moved?
Aug 22 02:16:30 <tinker-f595> what happens if you try to write into it?
Aug 22 02:16:55 <rektide> thuban:~# hwclock -w
Aug 22 02:16:56 <rektide> Timed out waiting for time change.
Aug 22 02:17:05 <tinker-f595> My system is off ready for packing to take to a show and tell tomorrow
Aug 22 02:17:30 <rektide> my rtc kind of pretends like its working... i can set times &c... but it doesnt advance in time.
Aug 22 02:17:45 <rektide> where's show & tell at ?
Aug 22 02:17:45 <tinker-f595> It will tkae me a few minutes to boot all the equipment...
Aug 22 02:17:54 <tinker-f595> in SF
Aug 22 02:17:56 <rektide> dont worry about it; knowing wouldnt make any difference
Aug 22 02:18:45 <tinker-f595> rektide: where are you?
Aug 22 02:19:00 <rektide> Denver CO right now.  bout to spend 3-4 months on the east coast.
Aug 22 02:19:09 <rektide> well, 2-3 months.  time enough to get back for the ski season.
Aug 22 02:19:12 <tinker-f595> ah
Aug 22 02:19:18 <rektide> who are you showing off too ?
Aug 22 02:19:28 <tinker-f595> olpc-sf
Aug 22 02:19:32 <rektide> ooh
Aug 22 02:19:47 <tinker-f595> I got it to port the XS to ARM
Aug 22 02:19:57 <rektide> XS ?
Aug 22 02:20:11 <rektide> spending some quality time with sugar has been on my todo list for a _long_ time now
Aug 22 02:20:24 <tinker-f595> proof of concept of a low power consumption server that could be powered via solar
Aug 22 02:20:29 <rektide> what's your username on plug forum, if you dont ask me minding ?
Aug 22 02:20:37 <tinker-f595> same
Aug 22 02:20:47 <tinker-f595> without the prefix
Aug 22 02:20:54 <tinker-f595> I mena without the suffix
Aug 22 02:21:03 <tinker-f595> I should just go to sleep
Aug 22 02:21:16 <rektide> so early!
Aug 22 02:21:38 <rektide> are you http://computingplugs.com/ ?
Aug 22 02:21:45 <tinker-f595> no
Aug 22 02:22:17 <tinker-f595> xs -- http://wiki.laptop.org/go/School_server
Aug 22 02:22:29 <rektide> http://computingplugs.com/index.php/Solar_powered_Sheeva_Plug
Aug 22 02:22:57 <tinker-f595> I have seen that
Aug 22 02:23:39 <tinker-f595> OpenRd should be easier as it takes 12 V dc in and manyready made panels provide 12 V dc
Aug 22 02:24:05 <rektide> any idea what kind of storage requirements there are?
Aug 22 02:24:21 <rektide> if XS needs >60GB, the SATA on OpenRD may be nice
Aug 22 02:25:17 <tinker-f595> rektide:  I have a 320 GB 2,5 inch sata drive for it
Aug 22 02:25:36 <tinker-f595> which I put in an esata case for the time being
Aug 22 02:26:00 <tinker-f595> easier to move around while getting things ready
Aug 22 02:26:07 <rektide> *nod* definitely
Aug 22 02:26:42 <tinker-f595> got a nice little Coolmax case
Aug 22 02:29:34 <rektide> is there a form factor for the openrd board ?
Aug 22 02:29:40 <rektide> how'd you get a fitting case ?
Aug 22 02:33:03 <tinker-f595> rektide openrd client comes with a case
Aug 22 02:35:23 <rektide> is there any mildly convenient way to bit bang configuration to embedded devices in linux ?
Aug 22 02:35:33 <rektide> id like to try toying with the RTC myself
Aug 22 02:35:47 <rektide> but if it involves writing kernel modules to do experimentation, its well beyond me
Aug 22 02:38:11 <tinker-f595> your using an OpenRD Base?
Aug 22 02:38:11 <tinker-f595> ask the developers at open-rd.org
Aug 22 02:45:27 <tinker-f595> rektide:  also look at http://www.marvell.com/products/embedded_processors/kirkwood/index.jsp for the processor functional PDFs etc
Aug 22 02:46:03 <Md> rektide: just open /dev/mem
Aug 22 02:59:41 <rektide> well this looks bad
**** ENDING LOGGING AT Sat Aug 22 02:59:57 2009