**** BEGIN LOGGING AT Thu Apr 07 23:59:56 2005 Apr 08 00:21:42 Hi. Can someone lend me a clue on how to mount a flash drive under OpenSlug? Apr 08 00:23:16 I have done dmesg, verified that there's a USB drive connected as sda1 (it happens to be DOS/Windows formatted), and tried "mount -t autofs /dev/sda /media/hdd", but I get "no such device" errors. Apr 08 00:23:24 Ditto with /dev/sda1, etc. Apr 08 00:24:52 I slao see the same thing with a USB hdd enclosure I previously ran under Unslung. dmesg shows partitions discovered at sda1, sda2, sda3, but I cannot get them to mount. Apr 08 00:37:37 <[g2]> n1xnx, modprobe vfat Apr 08 00:37:53 <[g2]> or mount -t vfat /dev/sda1 /media/hdd Apr 08 01:03:45 hehe, I found a new application for my openslug: "airwave-catcher"... works like a charm! :) Apr 08 01:04:07 <[g2]> siddy-work, what's airwave-catcher ? Apr 08 01:04:37 I can't get strace-4.5.11-r1 to compile in openslug-packages Apr 08 01:05:40 <[g2]> NAiL, last I checked a couple days ago 4.5.11 didn't compile Apr 08 01:05:54 <[g2]> I had an older 4.5.9 around and built that Apr 08 01:06:06 [g2], well, let's say my slug dumps the airwaves it finds in the 802.11-band ;) Apr 08 01:08:21 hmm.. strace doesn't seem to have a 'install' make target? Apr 08 01:11:04 siddy-work: what 802.11 device are you using? Apr 08 01:11:54 <[g2]> siddy-work, wrt54g runs kismet as a drone Apr 08 01:12:45 <[g2]> last I checked it didn't do channel scanning, but plugging that into the nslu2 and pulling the data would probably work quite nicely Apr 08 01:13:16 peteru-home, I'm using a netgear ma111 usb-stick (with linux-wlan-ng drivers) Apr 08 01:13:55 [g2] the kismet_server built by oe segfaulted, so it doesn't run ootb with openslug Apr 08 01:16:41 siddy-work: That's a prism 2.5 device, right? Apr 08 01:17:20 oh, I don't really now, it's pretty old 11 mbit prism-device. Apr 08 01:18:59 Good to hear that it's know to work. Apr 08 01:19:45 well, to be honest, I can only confirm that the monitor-mode works, but the rest should also do it. :) Apr 08 01:19:55 I should have known about it 8 weeks ago, although I was after a 54Mbps version. Apr 08 01:20:28 Anyone got any idea how long it'll take to compile samba on the slug? :) Apr 08 01:22:16 <[g2]> nope Apr 08 01:22:42 <[g2]> I've been trying to natively compile with my gateworks board over nfs Apr 08 01:22:58 long enough to have a shower and a cup of coffee :) Apr 08 01:23:06 <[g2]> things are working pretty well, except I think I got to the point where I need a swap space Apr 08 01:23:38 <[g2]> hmmm, maybe I'll just link with the slug Apr 08 01:24:14 distcc and a SlugFarm Apr 08 01:24:37 Compiling on the slug now... Apr 08 01:24:37 Mem: 30492 26620 3872 0 1368 Apr 08 01:24:37 Swap: 506036 44 505992 Apr 08 01:24:54 Should be enough swap, I hope :P Apr 08 01:25:31 <[g2]> my gateworks board runs 2x according to the BogoMips Apr 08 01:25:52 <[g2]> it's got 2x memory and I'm running GigE nfs Apr 08 01:26:00 bastard ;) Apr 08 01:26:13 <[g2]> so it's quicker on the slug, but I'm missing the swap space Apr 08 01:27:19 btw... Anyone know why the loadavg. is 1 when my slug is idle? Apr 08 01:28:25 <[g2]> NAiL, are you running unslung ? Apr 08 01:29:06 openslug Apr 08 01:29:25 <[g2]> hmmm how old ? Apr 08 01:29:32 yesterday's Apr 08 01:30:15 <[g2]> hmmm I'd think that'd include the patch for int driven ethernet are you on a busy network ? Apr 08 01:30:32 no Apr 08 01:30:47 Just my Windoze PC, linux server and slug. Switched net Apr 08 01:31:17 <[g2]> that's via top right ? I'm seeing 1.0 too Apr 08 01:32:10 from /proc/loadavg, top, uptime Apr 08 01:34:45 now that I'm compiling, it's at a rather stable 2.05 Apr 08 01:42:54 Ok... I'm not experienced with BK/OE, but the only thing I need to do to sync with the OE repo is bk pull, right? Apr 08 01:47:56 <[g2]> bk pull; bk -r co -q Apr 08 01:54:58 ty Apr 08 03:35:47 [g2]: Can see why your build failed... swap usage on the slug just passed 105mb Apr 08 03:41:26 uh? This *can't* be right.. Apr 08 03:41:26 43684 -rwxr-xr-x 1 root root 44681232 Apr 8 20:37 smbd Apr 08 03:41:49 the smbd binary clocks in at an impressive 43Mb :) Apr 08 03:53:23 yay! It works! :) Apr 08 03:55:58 * NAiL does a great happy-dance :) Apr 08 04:55:44 * NAiL is now running Samba 3.0.13 as his PDC :) Apr 08 07:50:53 I'm temporarily removing strace from openslug-packages until it is fixed. Apr 08 07:51:33 <[g2]> nod Apr 08 07:51:54 <[g2]> I've got a lot of a native compile environment working Apr 08 07:52:36 <[g2]-away> bbl **** ENDING LOGGING AT Fri Apr 08 23:59:56 2005