**** BEGIN LOGGING AT Wed Nov 09 02:59:57 2005 Nov 09 03:16:39 hi. where are the filesystems mounted in initrd ? Nov 09 03:33:33 my goal is to mount the / and swap using their label, as I configured in the fstab in / Nov 09 03:33:46 but now I searching where the / is mounted from the initrd... Nov 09 04:04:43 mmh, any way to edit a file in initrd when boot fails , Nov 09 04:04:50 s/,/?/ Nov 09 05:32:56 is the order usb drives are found at boot deterministic ? Nov 09 05:33:11 ie disk 1 = sda and disk 2 = sdb ? Nov 09 05:34:08 and then, what if more than 2 drives are plugged ? it does work once bootup is over, but has it an impact on drives order ? Nov 09 05:35:51 (g, are my question *that* stupid or is this chan that dead ?) Nov 09 06:07:44 Subdino: It's just slow ;) Nov 09 06:08:35 and no, which disk is detected first is random Nov 09 06:09:05 one can use udev to make sure that a certain disk becomes the root device Nov 09 06:30:38 what about LABEL= ? Nov 09 06:31:12 I trashed my previous install by changing by hand the device path in /initrd/linuxrc to LABEL=/ Nov 09 06:31:25 which is of course the label i used for the ext2 I use as / Nov 09 06:32:03 so I hard quie Nov 09 06:32:16 quite hard time to reinstall, and now it's finaly working again Nov 09 06:32:50 but as I use it as a bacula storage daemon, it would be really better if it was able to reboot cleanly without an operator Nov 09 06:33:11 my first test boot worked with all the disks plugged in, maybe will it always work Nov 09 06:33:35 I use LABEL in the fstab on sda, and it works for all the bacula disks Nov 09 06:34:06 so i think it should also work in early init Nov 09 06:43:26 mmh the mount command seems to be really minimal Nov 09 06:43:35 although fstab knows how to mout by label Nov 09 06:44:30 err, doesn't work now :/ Nov 09 21:36:47 hey can I install unslung packages on openslug? Nov 10 00:54:00 how can i natively build the smbfs kernel module? **** ENDING LOGGING AT Thu Nov 10 02:59:57 2005