**** BEGIN LOGGING AT Thu Dec 29 02:59:58 2005 Dec 29 05:38:34 What's the NSLUs standard IP? Dec 29 05:38:40 err, sorry Dec 29 05:44:01 77 or 80 at the end, Madkiss Dec 29 05:44:50 thanks Dec 29 05:50:54 you should see him with ping -b 192.168.1.255 Dec 29 05:51:52 is it right that I may just cut the resistor r84 into two piece? Dec 29 05:52:02 with a shaving knife or the like? Dec 29 05:52:44 R83, I mean Dec 29 06:06:52 does anyone have the source for the generic linksys utilities for the slug? (download, do_umount, QuickSet) Dec 29 06:10:29 Madkiss: if u chose the right resistor, yes Dec 29 06:10:42 make sure that its broken, but be careful ;) Dec 29 06:13:59 rammy: it's out. and the thing still seems to work Dec 29 06:16:18 i wouldnt do this.. if i try it, i would destroy everything ;) **** BEGIN LOGGING AT Thu Dec 29 06:48:40 2005 **** BEGIN LOGGING AT Thu Dec 29 06:56:54 2005 Dec 29 08:00:47 hello, everybody. I am new to this chat (and IRC as well); is this chat logged somewhere? Dec 29 08:02:04 velinp: yep, it should be logged Dec 29 08:02:31 at least, there is a log bot here: nslu2-log Dec 29 08:04:04 apt tell me what are you Dec 29 08:05:23 apt is a blootbot, so the logs could be at rikers.org Dec 29 08:06:46 velinp, http://ibot.rikers.org/%23openslug/ Dec 29 08:08:39 I saw it, thanks; going into read mode :) Dec 29 08:19:59 caplink811_log, velinp last time i looked (a week ago) this channel was not logged on rikers site Dec 29 08:20:05 #nslu2-linux is Dec 29 08:20:24 I've msg-ed tim riker to ask if this could also be logged Dec 29 08:21:02 eFfeM, since 12/22/05 it is Dec 29 08:21:28 ah ok, that is probably due to my request as it was submitted around that date Dec 29 08:22:00 in fact he might have answered me, but as I did not log his channel I did not get the answer (although miau was effective on it) Dec 29 08:22:04 ~botsnack Dec 29 08:22:04 caplink811_log: thanks Dec 29 08:22:21 ~weather eheh Dec 29 08:22:24 Eindhoven, Netherlands; (EHEH) 51-27N 005-25E 28M; last updated: 2005.12.29 1455 UTC; Dew Point: 26 F (-3 C); Pressure (altimeter): 29.94 in. Hg (1014 hPa); Relative Humidity: 100%; Sky conditions: overcast; Temperature: 26 F (-3 C); Visibility: less than 1 mile; Weather: Mist; Wind: from the SW (230 degrees) at 10 MPH (9 KT); Windchill: 15 F (-9 C) Dec 29 08:23:04 lol: relative humidity 100%; isn't there a simpler word for this ( rain :-) ) Dec 29 08:23:08 ~weather twenthe Dec 29 08:23:11 I can't find station code "TWENTHE" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Dec 29 08:23:16 tsss Dec 29 08:23:30 you need the right code koen Dec 29 08:24:40 koen: http://weather.noaa.gov/cgi-bin/nsd_country_lookup.pl Dec 29 08:24:44 ~weather ehtw Dec 29 08:24:47 Twenthe, Netherlands; (EHTW) 52-16N 006-54E 57M; last updated: 2005.12.29 1455 UTC; Dew Point: 28 F (-2 C); Pressure (altimeter): 29.88 in. Hg (1012 hPa); Relative Humidity: 92%; Temperature: 30 F (-1 C); Visibility: 5 mile(s); Wind: from the SW (220 degrees) at 9 MPH (8 KT); Windchill: 21 F (-6 C) Dec 29 08:27:52 ~weather eddi Dec 29 08:27:57 Berlin-Tempelhof, Germany; (EDDI) 52-28N 013-24E 49M; last updated: 2005.12.29 1450 UTC; Dew Point: 28 F (-2 C); Pressure (altimeter): 29.71 in. Hg (1006 hPa); Relative Humidity: 92%; Sky conditions: mostly cloudy; Visibility: 1 mile(s); Weather: 30 F (-1 C); Wind: from the WSW (240 degrees) at 16 MPH (14 KT); Windchill: 19 F (-7 C) Dec 29 08:28:23 humidity 92% aka much snow Dec 29 10:54:58 compiling monotone head 93cb56a3db2029f6c152e3050055e1a0e05f897f, i get package fetchmail-6.2.5: failed; I think the reason is Dec 29 10:55:48 armeb-linux-uclibc-gcc ... -I/mnt/wrk/vel/home/vel/nslu/openslug-2.8/ucslugc/tmp/staging/armeb-linux-uclibc/include, while Dec 29 10:56:25 a find .. libint.h gives me 4f5a170db1ac06e1566b54c702772eb8 ./leslug/tmp/staging/arm-linux/include/libintl.h Dec 29 10:59:37 I would not bother, but a wrong include path might have bad side-effects (elsewhere?) Dec 29 14:10:26 BOfH: no one has the source code to the linksys utilities Dec 29 14:18:33 has anyone tried FUSE yet? Dec 29 15:08:56 rwhitby: I was under the impression they were on the disk provided with the nslu. Was wrong, apparently. Dec 29 15:13:32 there is no source code on the disk as far as I know Dec 29 16:46:35 hi all Dec 29 16:47:03 hey hanjo Dec 29 16:47:14 hi rwhitby Dec 29 16:47:20 has been a long time :) Dec 29 16:47:33 I see that work is going nice Dec 29 16:48:01 a lot of EBs and LEs :) Dec 29 16:48:21 yes, I'm working on getting them into debian proper now ... Dec 29 16:48:24 I wanted to ask if anyone is working on the cross cups package Dec 29 16:48:32 for openslug Dec 29 16:49:13 I just did some small changes and it seems to be working Dec 29 16:49:20 dunno Dec 29 16:49:27 but I hit a snag with Ghostscript Dec 29 16:50:03 the cross EPS Ghostsctipt crashes with: Dec 29 16:50:05 ESP Ghostscript 7.07.1: ./src/interp.c(293): Fatal error -20 in gs_interp_init! Dec 29 17:02:15 Is there any work on converting some of the remaining openembedded packages to openslug, or all eyes are now turned to OpenDebianSlug, and the non-nslu2-specific packages are all going to be normal dpkg? Dec 29 17:05:53 hanjo: that's the direction I'm driving towards. You can use LeSlug today and debootstrap to debian unstable ... Dec 29 17:16:39 has the problem with the LE on-board ethernet controller been solved? Dec 29 17:20:04 wow, that's a lot of armeb sarge packages on debonaras :). Good luck with the project! Dec 29 17:22:08 good night all Dec 29 23:33:17 jj-- Dec 29 23:40:54 FYI: http://article.gmane.org/gmane.comp.misc.nslu2.linux/10693 <- asking the question whether nslu2-linux should focus on arm(el) or armeb or both Dec 30 01:45:25 rwhitby: are there no speed disadvantages when running BE? Dec 30 01:45:44 LE that is Dec 30 01:51:17 koen: dunno - haven't done a detailed performance analysis. I expect it would be in the noise compared to other slower factors in the architecture. **** ENDING LOGGING AT Fri Dec 30 03:00:01 2005