**** BEGIN LOGGING AT Sat Feb 25 10:59:57 2006 Feb 25 11:38:39 phieuw Feb 25 11:38:49 effem-slug is online again Feb 25 11:39:54 header is mounted, pin1 turned out to be a tough cookie to get open, probably my gear was not good enough but it is done, the header is there and it still boots Feb 25 11:39:59 todo: cable Feb 25 12:13:11 oh damn, if you use an existing cable in most cases you do not even need pin 1 Feb 25 12:13:34 no, in most cases you don't Feb 25 12:15:22 well pin1 took quite a lot of effert Feb 25 12:15:28 s/effert/effort/ Feb 25 12:15:28 eFfeM meant: well pin1 took quite a lot of effort Feb 25 12:15:53 ah, well, if I ever want to do i2c I at least have a connector with vcc and gnd ... Feb 25 12:33:48 is there normally a login prompt on the serial port ? Feb 25 12:35:17 yes Feb 25 12:36:18 tnx, indeed saw that there was a getty running Feb 25 12:36:22 * eFfeM is about to test his work .... Feb 25 12:37:13 8N1? Feb 25 12:37:16 yes Feb 25 12:37:21 8n1 115200 Feb 25 12:37:47 115200 is on the wiki 8n1 isn't, i'll add it later Feb 25 12:54:17 hm, not working Feb 25 12:55:12 between tx and gnd I get about 3.5 V, sometimes dropping a little bit momentarily, between rx and gnd there is 1.5 b Feb 25 12:55:20 s/5 b/5 v/ Feb 25 12:55:21 eFfeM meant: between tx and gnd I get about 3.5 V, sometimes dropping a little bit momentarily, between rx and gnd there is 1.5 v Feb 25 12:55:37 espellay the rx value seems odd Feb 25 13:00:30 NAiL, should I expect activity on the outgoing line of the cable when pressing keys in my term program if it is connected to the pc and not to the slug Feb 25 13:00:31 ? Feb 25 13:00:38 as I don't Feb 25 13:00:52 and this http://www.meshcube.org/meshwiki/ModifiedMobileSerCable says: Feb 25 13:01:04 Note: If you have one of the black Siemens RS-232 cables, this one is not powered by the pc. Feb 25 13:01:04 Instead you have to connect the red cable (pin 4) to 3.3 V on the router. Feb 25 13:01:20 you have an USB-cable, right? Feb 25 13:01:35 no, serial Feb 25 13:01:35 If it's a pl2303, you don't need the 3.3V Feb 25 13:01:39 oh Feb 25 13:01:42 hmm Feb 25 13:01:50 I dunno then ;) Feb 25 13:01:53 ok Feb 25 13:11:09 yesss, did apply power as suggested on http://www.meshcube.org/meshwiki/ModifiedMobileSerCable and it works!!! Feb 25 13:11:13 hooray Feb 25 13:11:25 will write a little bit on this on the wiki, but need to go now Feb 25 13:12:24 cool Feb 25 13:13:46 need to clean up the work a little bit. Feb 25 13:13:49 back later Feb 25 13:13:57 and thanks for your help! Feb 25 13:15:22 "np" Feb 25 16:51:36 helo! Feb 25 16:52:05 Did someone manage to run LVM2 on a slug? Feb 25 16:52:37 I just tried, failed and found some info about lvm having trouble with big-endian systems Feb 25 17:31:56 VoodooZ_Log: ping? Feb 25 18:08:59 LVM seems to work now. I had to modify the lvm2_*.bb file Feb 25 18:09:22 it needs to be configured with --disable-o_direct Feb 25 18:10:16 hasn't that already been done? Feb 25 18:10:43 I used 2.7 Feb 25 18:10:47 OpenSlug 2.7 Feb 25 18:11:14 from the tarball? Feb 25 18:11:18 It's fixed in svn ;) Feb 25 18:11:19 repvik@Ximinez:~/slug/releases/OpenSlug-2.7-beta/openembedded/packages/lvm2$ grep direct * Feb 25 18:11:23 lvm2_2.01.15.bb:EXTRA_OECONF = "--with-user= --with-group= --disable-o_direct" Feb 25 18:12:17 infact, that fix should be in the feed... Feb 25 18:14:30 and now i have trouble with irssi... I can't read anything anymore, have to reconnect Feb 25 18:15:02 I used OpenSlug 2.7, there it was missing Feb 25 18:16:19 in the tarball, or from svn? Feb 25 18:16:46 the fix was done after the tarball was released Feb 25 18:16:49 so it's only in svn Feb 25 18:17:08 ah, i used the tarball. Feb 25 18:20:22 * NAiL *so* digs anjuta Feb 25 18:21:14 NAiL: 1.x or 2.x? Feb 25 18:21:51 oops, gotta run Feb 25 18:22:15 koen|away: 1.2.something Feb 25 18:24:21 Last time I used an IDE, it was text-based. This is like... heaven :-P Feb 25 21:15:36 * NAiL looks forward to getting a stk500 next week Feb 25 21:16:04 omg Feb 25 21:16:28 the stk500 costs >USD100? Feb 25 21:17:20 * NAiL pays ~40USD Feb 26 09:53:11 hi, what is the logic behind the filenames of the .img files? I get: Feb 26 09:53:12 -rw-rw-r-- 1 slug slug 8388608 Feb 26 10:47 openslug-nslu2-20060225163730.flashdisk.img Feb 26 09:53:30 I had expected the time in the filename to be feb26 10:47 Feb 26 09:53:44 (build the kernel yesterday, but rebuild the image today) Feb 26 09:57:11 also I am missing pvrusb2-mci on the unstable feed although it is in slugos-packages.conf, can't find it in the build logs either **** ENDING LOGGING AT Sun Feb 26 10:59:56 2006