**** BEGIN LOGGING AT Sun Apr 30 09:59:57 2006 Apr 30 11:59:55 hi can anyone help me to configure and setup a nfs server on my openslug? i cannot mount Apr 30 12:03:16 kami22: have you looked at http://www.nslu2-linux.org/wiki/OpenSlug/InstallNFS Apr 30 12:04:00 yes and i configured it but my problem is when i mount a device it always takes a very long time Apr 30 12:04:17 does it mount eventually? Apr 30 12:05:27 on my ubuntu system mounting takes quite some time (a minute or so). haven't found out why, my fedora system does mount very fast Apr 30 12:23:05 juhe, build finished!!! Apr 30 12:23:26 D|dge: congrats Apr 30 12:24:51 now I have to find the image and flash it Apr 30 12:29:42 D|dge: tmp/deploy/images Apr 30 12:36:38 OK, flashing now Apr 30 12:37:03 I hope there are now problems when flashing over unslug 3.2 Apr 30 12:42:20 are there any limitations where I can use the flash stick or the disc over a hub? Apr 30 12:42:27 I mean which port Apr 30 12:43:08 no Apr 30 12:43:22 assuming you have a decent 2.0 hub Apr 30 12:43:40 (you don't want to use a 1.1 hub for your disk, do you?) Apr 30 12:44:00 no :-) Apr 30 12:44:38 guessed that Apr 30 12:44:46 actually there is an issue Apr 30 12:45:19 hi, how i can find out the ip address of my nslu2? i forget the address i have set :( Apr 30 12:45:42 if you use a hub and there are too many other devices bus iteration might cause that your disk is not found yet when the system wants to access it, use turnup with -s 2 or so to deal with that if you encounter this problem Apr 30 12:46:25 also as a starter perhaps connect the disk directly to the slug (better safe than sorry) Apr 30 12:48:53 I want root on the flash Apr 30 12:49:08 and only the data on the disc(s) behind a hub Apr 30 12:50:19 mr_claus, you can try nmap -sP 192.168.n.0/24 (replace n with the appropriate number for your network). nmap is available at www.insecure.org/nmap (even for windows) Apr 30 12:53:26 EvilDevil: ok, i will try that, ty Apr 30 13:03:20 hmm, i cannot find it, upslug detect the slug but i don't know the ip Apr 30 13:54:37 who knows where i can download the setup utility of the nslu2? Apr 30 13:56:15 mr_claus, google? or the nslu2 setup cd? Apr 30 13:56:28 i cannot find the setup cd :( Apr 30 13:56:33 i googled but didn't find it Apr 30 13:57:19 and it's not possible to download from linksys it seems Apr 30 13:57:21 mr_claus, http://www.nslu2-info.de/downloads.php? (german) Apr 30 14:00:12 ftp://ftp.linksys.com/pub/network/NSLU2-SetupWizard.zip Apr 30 14:01:02 ty, i registered i download is working now Apr 30 14:01:31 mr_claus, i think the nslu2-info.de page could be useful for you anyway Apr 30 14:01:46 yes it seems Apr 30 14:02:10 i didn't use my slug since a few month and now i forgot a lot of things :/ Apr 30 14:03:10 there were some neat changes. You can use Debian on the Nslu2 without any additional hardware Apr 30 14:03:41 unslung 6.8 was released and more additional hardware is now supported Apr 30 14:06:13 at i stopped working on my slug i used openslug, not it seems that udev is available Apr 30 14:15:41 mr_claus, you're invited to join #nslu2-german Apr 30 20:37:00 hi there Apr 30 20:37:18 during an apt-get my DebianSlug hanged up Apr 30 20:37:30 so i had to unplug replug power cable Apr 30 20:37:44 now the slug does not respond to ping Apr 30 20:38:03 and it seems that the drive is accessed Apr 30 20:38:09 according to the drive LED Apr 30 20:38:39 can anyone help Apr 30 20:46:00 reboot without disk attached, then login and mount (after reattached the drive) /dev/sdax (whatever you use) and search and delete a file named .recovery Apr 30 22:15:03 Is 2.6.16 running stable on your boxen? Apr 30 22:15:11 (to anyone) Apr 30 22:15:30 it's quite stable on my slug and pdas Apr 30 22:15:42 but I haven't been pushing those too hard Apr 30 22:17:52 koen: thnx. Got ixp400_eth problems here...grr **** ENDING LOGGING AT Mon May 01 09:59:56 2006