**** BEGIN LOGGING AT Sun Jan 07 02:59:58 2007 Jan 07 16:50:07 is the right channel to ask questions about debian on the slug? Jan 07 16:51:59 bubba: you can try... challenge us Jan 07 16:53:02 its really simple. i use apache2, but i want to install php for it now. i tried the old 'apt-get install php5' and it said there were dependancies which could not be installed. i guess my sources.list is out of date..? if so, does anyone know where to get the right sources.list please? Jan 07 16:53:19 if not, any pointers would be very much appreciated. Jan 07 16:56:58 is there some central place for sources.list examples for the debian slug people? Jan 07 17:00:35 did you try apt-get update? Jan 07 17:00:49 yeah... but i think i am using the wrong sources Jan 07 17:00:58 could i use your list? Jan 07 17:01:27 eh, doing openslug over here... Jan 07 17:01:38 so no debian? Jan 07 17:01:44 NAiL: you here? doing debian perhaps? Jan 07 17:02:28 bubba: sorry... if I had some more time I'd reflash my testslug for you. maybe later if you wish Jan 07 17:02:42 dont go to any great trouble Jan 07 17:03:02 i think its just me stupidly breaking sources.list or my slug being too old for the php packages out there Jan 07 17:03:13 can you delete (or rename or move) the list and do a new apt-get update? Jan 07 17:03:34 <[cc]smart> bb qemu tries to fetch source code via cvs. the command issued by bitbake is ok but it returns with cannot get working directory: No such file or directory. i'm trying to find out where bb actually does try to do the checkout to because i guess that the target doesn' exist. where can i find that information ? Jan 07 17:03:40 delete sources.list totally? Jan 07 17:04:39 dont delete, just rename it into sources.list.jan7th Jan 07 17:05:17 wont it just have no packages at allt hen? Jan 07 17:05:45 yes, so it will try to fix that by downloading the list I'd assume Jan 07 17:06:35 it doesn't hurt to try Jan 07 17:06:38 aha, just complains there's no sources.list :) Jan 07 17:06:54 E: Opening /etc/apt/sources.list - ifstream::ifstream (2 No such file or directory) Jan 07 17:07:04 darn Jan 07 17:07:17 am i in the wrong channel for this? Jan 07 17:11:31 thanks jelle Jan 07 17:12:13 bubba: still looking for you, hold Jan 07 17:12:21 ok thanks! Jan 07 17:14:08 btw, you dont use apache+php do you? Jan 07 17:14:44 my brother does, but he is running unslung Jan 07 17:14:51 works like a charm. installs fine too Jan 07 17:16:09 aha Jan 07 17:16:16 i think i just have apache2 on here Jan 07 17:16:23 hwo do you tell if you have php (really dumb q) Jan 07 17:16:31 is there a php command? Jan 07 17:19:35 yes, it is calles php Jan 07 17:19:41 or php5 perhaps Jan 07 17:19:49 try "which php" Jan 07 17:19:51 see if it replies something Jan 07 17:19:59 yeah, not on my system Jan 07 17:20:07 i think i need that sources.list Jan 07 17:20:13 are there other channels i could try? Jan 07 17:26:37 yes, perhaps #nslu2-linux Jan 07 17:30:31 bubba: maybe this page points you to some good sources.list files... or tells you how to set one up to update itself: http://www.debian.org/doc/FAQ/ch-uptodate.en.html Jan 07 17:30:40 also look at the aptitude pages Jan 07 17:37:12 seems i am using a very out of date version of things Jan 07 17:37:20 someone in nslu2-general is helping me Jan 07 17:37:24 thanks for yur time jelle Jan 07 17:37:27 much appreciated mate Jan 07 17:37:32 <[cc]smart> i even get an error message when i try to login to trac :P Jan 07 17:44:51 <[cc]smart> is there a way to join nslu2-linux mailing list without specifying birthday, postal code and whatnot ? Jan 07 17:48:22 i see, np bubba Jan 07 17:52:58 thanks jelle Jan 07 17:53:01 where you from mate Jan 07 17:56:23 nl here Jan 07 17:56:25 you? Jan 07 17:56:36 uk Jan 07 17:56:55 that's nice, just one little puddle between us Jan 07 17:57:00 hehe Jan 07 17:57:27 :) Jan 07 17:57:37 you ever been here? Jan 07 17:58:19 sure, a couple of times, I did some walking (North Downs, Cotswalds, Peak district) and some more travelling Jan 07 17:59:03 nice choices Jan 07 17:59:10 .nl seems very progressive Jan 07 17:59:14 I believe so Jan 07 17:59:16 that too Jan 07 17:59:17 would like to go there one day Jan 07 17:59:56 come on over, the puddle is waiting Jan 07 18:00:47 hehe Jan 07 18:00:56 i have a friend in the hague Jan 07 18:01:45 quite close, I'm in Rotterdam Jan 07 18:01:58 but it is all quite close, such small country Jan 07 18:02:01 well, gotta go Jan 07 18:02:04 hope you get your debian running just fine Jan 07 18:02:08 ok thanks bud Jan 07 18:02:24 laters Jan 07 18:39:51 <[cc]smart> does "bb qemu" work for you in openslug ? Jan 07 19:00:41 [cc]smart: -sh: bb: not found Jan 07 20:24:46 Hi people. Jan 07 20:25:54 Anyone around? Jan 07 20:29:34 Certainly - but it's best to just ask your question, and be patient - more people are likely to answer your question that way. Jan 07 20:54:49 No worries. Jan 07 20:55:23 I was wondering if someone can help me get started using monotone on Mac? Jan 07 20:55:47 I have everything installed. Just need some pointers on how to get started in contributing a package to OpenSlug. Jan 07 20:56:02 I tried that, but ran into some problems. seems to not be suppoeted yet Jan 07 20:57:00 monotone on Mac? Jan 07 21:00:02 I just want to submit a package that doesn't exist in OpenSlug. I have it compiled and running properly on OpenSlug. Jan 07 21:01:37 good for you, so you got monotone running on a mac? could you compile a firmware for slig on it? using linux/mac or osx? Jan 07 21:01:56 any chance you can update the wiki to let us know how you got it working> Jan 07 21:02:26 I followed instructions from here http://www.openembedded.org/wiki/BuildOnOSX Jan 07 21:05:34 alright, maybe the wiki should have a link to that as well (if it doesn't) Jan 07 21:07:15 I'll add it. Jan 07 21:07:28 thanks Jan 07 21:07:49 No problem, I've been updating wikis all over the places on the site. Jan 07 21:08:00 hurray! Jan 07 21:08:40 OpenSlug has so few packages. Jan 07 21:09:00 mt-daapd has an old release which does not work with iTunes 7 Jan 07 21:09:44 While I can compile the source, I'd rather update the package, so other people don't have to go through this exercise. Jan 07 21:40:19 Daze: true! Jan 07 21:41:06 I'd say go for it. try to contact NAiL or rwitby, they'll be thrilled. Jan 07 21:41:30 I dont think they're here now, but they'll be back Jan 07 21:41:47 as will I. bye for now Jan 07 21:49:31 hello, sorry, .. where can I find help about setting up 2 routers .. using one of them as a switch? Jan 07 21:52:33 when they use openslug as os, here, but maybe channel #router is a good choice too Jan 07 21:55:48 k , I can install openslug onto my wrt54gl .. I guess , if it helps :) Jan 07 21:58:41 maybe, that openwrt, or dd-wrt is another choice, two of my wrt54 running with the latter Jan 07 21:59:18 imho, channel #ddwrt should be available at freenode.org Jan 07 22:00:38 #dd-wrt it is Jan 07 22:00:44 There's so much confusing forums and howtos and info on google... its hard to find a simple howto .. I only need to make linksys work as a switch which is connected to d-link (connected to adsl modem) Jan 07 22:01:52 so, the d-link is your wan-router? Jan 07 22:01:57 I dont even know basic networking stuff .. like gateways and and such ... those routers do work with each other with default settings .. but .. Jan 07 22:02:24 and the wrt is your lan router? Jan 07 22:03:00 yep .. adsl modem > d-link di-614+ > linksys wrt54gl > 2 PC-s , 1 wirelell laptop Jan 07 22:03:51 wireless laptop cannot connect to internet now, but can access linksys at 192.168.1.1 .. Jan 07 22:03:55 but, why you need the d-link, the wrt can handle pppoe as well as the d-link can? Jan 07 22:04:29 my neighbour has d-link for his 3 pc-s .. and my linksys is connected to his d-link Jan 07 22:04:53 k Jan 07 22:05:18 I think I need to use linksys as swtich (or something) .. to disable firewall, nat etc Jan 07 22:05:44 then you should set up the wan port static with an ip adress from your neighbours network, and it should work Jan 07 22:05:45 I cannot figure out how to set up all ip-s gateways etc Jan 07 22:08:13 Martiini, join channel #jrb pls, yout topic is untopic here, but the setuo is easy Jan 07 22:08:20 s/setuo/setup Jan 07 22:09:21 :) Jan 07 22:12:10 how is your linksys connected? Jan 07 22:12:16 via ethernet? Jan 07 22:13:25 You should disable DHCP on your Linksys, so that your network will get all its IPs from the D-Link at your neighbour's Jan 07 22:14:13 That should be all you need to do... Jan 07 22:14:15 yea, caplink811_log .. was just telling me somthing like as well .. Jan 07 22:14:37 I work in the Networking field. Gimme a shout if you run into issues... Jan 07 22:14:58 first, its hard to figure out the whole logic of networking and , second , its a bit hard to figure out the router interfaces Jan 07 22:15:24 Naah, it's not too difficult. You just need to mess with it a little bit. Jan 07 22:16:09 Don't connect to your neighbour's D-Link via the WAN port of the Linksys Jan 07 22:16:19 Use one of the 4 switch ports. Jan 07 22:16:27 Log in via the 192.168.1.1 address Jan 07 22:17:08 You should specificy static ip address on your PC first, e.g. 192.168.1.2 Jan 07 22:17:18 then via the web interface of the linksys, disable DHCP Jan 07 22:17:39 why? so i lost all fw control, and it works also, if i use the wan port with a static ip adress?! Jan 07 22:17:55 I only need to get my emule work with high-id (open ports) .. and I've plugged d-link lan cable into linksys lan cable .. just need to set up ip-s etc correctly Jan 07 22:18:23 Try it this way first, then you can worry about the firewall later... Jan 07 22:18:52 Disable DHCP on linksys, and go from there. Jan 07 22:18:58 should i tell d-link first to accept ip that Im gonna assign to linksys ? Jan 07 22:19:15 assign linksys a different ip address than the D-link Jan 07 22:19:26 whats the d-link using? Jan 07 22:19:31 put it in the same network Jan 07 22:24:03 blah, I dont even know .. which to set up first.. 1. my PC TCP/IP propeties, 2. linksys or 3. d-link Jan 07 22:24:36 OK, what's your current IP address? Jan 07 22:24:50 Know how to find that out? Jan 07 22:25:24 let's start with that Jan 07 22:25:27 Dhcp Enabled. . . . . . . . . . . : Yes Jan 07 22:25:27 Autoconfiguration Enabled . . . . : Yes Jan 07 22:25:27 IP Address. . . . . . . . . . . . : 192.168.0.110 Jan 07 22:25:27 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Jan 07 22:25:27 Default Gateway . . . . . . . . . : 192.168.0.1 Jan 07 22:25:27 DHCP Server . . . . . . . . . . . : 192.168.0.1 Jan 07 22:25:29 DNS Servers . . . . . . . . . . . : 192.168.0.1 Jan 07 22:25:43 it on autoconfig Jan 07 22:26:00 192.168.0.1 is D-Link's IP? Jan 07 22:26:05 (default gateway) Jan 07 22:26:40 I think so Jan 07 22:26:54 192.168.1.1 should be linksys Jan 07 22:27:04 Let's keep it in the same network Jan 07 22:27:14 So assign it an IP of 192.168.0.2 Jan 07 22:27:36 So your Linksys: 192.168.0.2 Jan 07 22:27:46 D-Link: 192.168.0.1 Jan 07 22:27:55 * caplink811_log thinks about the necessary of a layer 3 router Jan 07 22:28:12 caplink, he doesn't need a router... :) Jan 07 22:28:24 it's all layer 2 here at switch level Jan 07 22:28:48 if he use his neighbours router, and like to save his own data... Jan 07 22:28:52 I think I need some sense, to be honest :) Jan 07 22:29:26 Martiini, make sure 192.168.0.1 is D-Link Jan 07 22:29:33 open it up in the web browser. Jan 07 22:29:46 otherwise nothing will work for you Jan 07 22:29:47 :) Jan 07 22:29:52 can I paste here ? Jan 07 22:30:00 d-link: Jan 07 22:30:02 MAC Address Jan 07 22:30:02 00-0D-88-F3-55-28 Jan 07 22:30:02 IP Address Jan 07 22:30:02 192.168.0.1 Jan 07 22:30:02 Subnet Mask Jan 07 22:30:03 255.255.255.0 Jan 07 22:30:05 DHCP Server Jan 07 22:30:07 Enabled Jan 07 22:30:14 Excellent Jan 07 22:30:26 now, go to your linksys Jan 07 22:30:36 assign it 192.168.0.2 Jan 07 22:30:39 and disable DHCP Jan 07 22:31:08 .. I need to make pc gateway 192.168.1.1 .. so I lose connection for a while Jan 07 22:31:17 yep Jan 07 22:31:58 but whenever Ive tried turning off linksys dhcp and assign static ip .. I cannot connect to dlink anymore Jan 07 22:32:26 maybe Ive done smth wrong or .. .. I'll try anyweay Jan 07 22:32:56 if everything worked, you should be able to ping d-link and linksys Jan 07 22:33:04 at 192.168.0.1 and 192.168.0.2 Jan 07 22:33:11 do a "ipconfig /release" Jan 07 22:33:17 and then a "ipconfig /renew" Jan 07 22:33:43 after Ive assigned static ip to linksys? Jan 07 22:33:53 yes, first assign ip to linksys Jan 07 22:34:17 and DISABLE DHCP Jan 07 22:34:36 cant have two DHCP running, or it cause problems for you and the neighbour Jan 07 22:40:49 Guys, I have to run. If Martiini has problems, please help him or ask him to email me at fyjunk@mm.st Jan 07 22:48:14 hi there Jan 07 23:57:49 Im back bothering with my router setup problem again ... uploaded some screenshots to http://www.flickr.com/photos/42936847@N00/ Jan 07 23:58:25 I still cannot figure out how to configure those routers Jan 07 23:59:46 hey there Jan 07 23:59:49 let me take a look Jan 08 00:01:38 dude Jan 08 00:01:44 Did you disable DHCP? Jan 08 00:02:02 Are you on AIM or MSN? Jan 08 00:02:18 martinmaimik@hotmail.com Jan 08 00:02:46 k, added Jan 08 02:09:25 heh Jan 08 02:09:39 I'm trying ot take the md array I moved *to* openslug back to x86 Jan 08 02:09:51 and I can't remember how I got it to flip the endianness around in the superblocks Jan 08 02:16:01 tzanger: you should have written up a howto on the wiki the first time ;-) Jan 08 02:16:09 indeed Jan 08 02:16:24 I'm gonna have to wire up the nslu2 again to see if this array comes up yet Jan 08 02:16:37 it does not look like an endian issue now, which is a little scary Jan 08 02:26:01 night **** ENDING LOGGING AT Mon Jan 08 02:59:57 2007