**** BEGIN LOGGING AT Thu Oct 04 02:59:56 2007 Oct 04 08:12:32 [florian], ping Oct 04 10:09:31 nico * r9116 /packages/net/mini_httpd/Makefile: [packages] mini_httpd: fix typos preventing the -matrixssl & -openssl packages from being built Oct 04 10:15:52 nico * r9117 /packages/libs/freetype/Makefile: [packages] freetype: tweak sed-ifications in freetype-config for version detection and in pkgconfig file Oct 04 10:56:40 juhosg * r9118 /trunk/target/linux/adm5120/ (7 files in 4 dirs): Oct 04 10:56:40 [adm5120] NAND driver cleanups, thanks to Alexandros C. Couloumbis for testing Oct 04 10:56:40 * use generic NAND driver from now Oct 04 10:56:40 * add experimental support for RouterBOARD 150 NAND device Oct 04 12:54:07 [florian], ping Oct 04 12:54:50 [florian], are you here? Oct 04 13:11:28 [florian], are you here? Oct 04 13:11:39 <[florian1> yes I am Oct 04 13:35:58 Weedy, have you seen florian there? I've just experienced network outage :( Oct 04 14:04:00 [florian], hi! Oct 04 14:06:43 <[florian]> slapin: hi slapin Oct 04 14:06:58 [florian], what do you think, is it possible to recover after mtdtools on rtl865x (if bootloader part is not overwritten)? I'm unable to make it work with bootp Oct 04 14:07:48 [florian], bootloader tells it can't setup VLAN and writes number 17, dunno what that means. No traffic on interface :( Oct 04 14:14:08 <[florian]> slapin: looks like a default error message, maybe not related to mtd Oct 04 14:14:17 <[florian]> slapin: I guess you could recover it for sure Oct 04 14:16:22 [florian], well, I did not touch it yet but I can't see how I could recover in case of errors in case of e.g. kernel problems, because I can't see how to boot it from bootp, and JTAG pinout is not yet known, so is there some options? Oct 04 14:17:14 [florian], it doesn't produce any traffic on either of ethernet ports during attempt of bootp'ing :( Oct 04 14:23:09 <[florian]> slapin: that's weird, not even an arp resolution ? Oct 04 14:23:42 <[florian]> slapin: your bootloader seems really crappy Oct 04 14:24:04 [florian], not even ARP resolution :( Oct 04 14:24:24 <[florian]> slapin: ok, then I do not know Oct 04 14:24:35 [florian], absolutely nothing. Any idea on what to try? Oct 04 14:25:00 [florian], it seems it have problems initiaizing network from bootloader. Oct 04 14:25:21 <[florian]> slapin: no idea, try to get more debug infos from your bootloader Oct 04 14:25:38 <[florian]> you mentionned vlan or something like that, have you tried creating a vlan just for booting the device ? Oct 04 14:25:45 I'm a bit afraid of modifying kernel on this device because of these probeems Oct 04 14:26:27 [florian], well, I think network card should get all frames in promisceous mode, even tagged ones, no? Oct 04 14:26:57 <[florian]> slapin: yes, at least you should see them Oct 04 14:29:44 <[florian]> slapin: really I have no idea Oct 04 14:29:46 [florian], so I doubt it outputs something :( I think I'll put mtdtools-capable rootfs into device and try to read bootloader code to understand what error message means Oct 04 14:29:57 <[florian]> slapin: it could be worth developping your own bootloader for that device, and upload it via jtag Oct 04 14:30:45 [florian], I think bootloader is in mtd partition, so it is possible with mtdtools, but once :( Oct 04 14:31:50 matteo * r9119 /trunk/package/ar7-atm/patches/100-compile_fix.patch: Fix sangam DSL build with 2.6.23 kernel Oct 04 14:32:00 [florian], it'd be great if jtag interface pinout was known Oct 04 14:32:14 [florian], that'd solve everything Oct 04 14:32:42 <[florian]> slapin: absolutely, it should be a standard mips header Oct 04 14:36:23 [florian], does this http://ossfans.org/DI524UP/17_40_05-310707.jpg looks like standard MIPS header? Oct 04 14:37:09 [florian], it's 20-pin header Oct 04 14:37:12 <[florian]> yes it looks like, do you have a multimeter ? Oct 04 14:37:16 <[florian]> let me find the page Oct 04 14:38:13 [florian], well, I'm at work now and that thing is at home, so I could test something only when I come home Oct 04 14:38:46 [florian], so I'd like to know what I could test then :) Oct 04 14:43:52 <[florian]> slapin: the 14-pin header jtag should be very similar from the 20-pin described here : http://wiki.openwrt.org/OpenWrtDocs/Customizing/Hardware/JTAG_Cable Oct 04 14:45:57 [florian], could you please mail me so I have your address, I promise not to ask too much questions :) Oct 04 14:48:11 <[florian]> slapin: simple : florian at openwrt dot org Oct 04 14:51:29 [florian], thanks! Oct 04 14:52:45 [florian], what do you think if realtek bootloader will work on this device? Oct 04 14:53:22 [florian], where could I see its source and output from serial console? Oct 04 14:53:25 <[florian]> slapin: at first sight, I doubt it could because I am not sure the gpio mapping is the same on your device Oct 04 14:53:52 [florian], but I think serial and ethernet should work, no? Oct 04 14:54:16 [florian], or these are connected to GPIOs? Oct 04 14:55:40 [florian], my device seems not to have separate PHY chip, so I think at least ethernet is the same 100%... Oct 04 14:56:34 <[florian]> slapin: I guess ethernet and serial will work because they are built-in Oct 04 14:56:44 <[florian]> slapin: the rtl865x uses a 16650 compatible uart Oct 04 14:57:40 [florian], so that should be enough to start if source is available... Oct 04 14:58:09 <[florian]> slapin: absolutely, even flash could work Oct 04 14:58:26 [florian], I jast thought I have very big problem - I have no any parallel port on any device I have home :( Oct 04 15:01:21 [florian], I think I could buy some old laptop this weekend. Oct 04 15:02:07 [florian], anyway, that seems interesting - do you have some photo and pinout for some similar device so I could use it as reference? Oct 04 15:32:57 nbd * r9120 /trunk/include/quilt.mk: separate series file fixup from quilt check to avoid series file breakages after fixing a broken patch stack with quilt Oct 04 17:11:19 hmm, anyone knows how to find or calculate the values for cound and skip in the .nas firmware image for the 700gE? Oct 04 17:11:20 http://openwrt.pastebin.com/d2fda9bcb Oct 04 17:58:14 nbd * r9121 /trunk/include/quilt.mk: fix quilt patch check Oct 04 19:01:32 blogic * r9122 /packages/XOrg/font-native/font-util/Makefile: changed menu of font-util Oct 04 19:01:52 blogic * r9123 /packages/XOrg/lib/atk/ (. Makefile): added accesibility toolkit Oct 04 19:02:07 blogic * r9124 /packages/XOrg/lib/cairo/ (. Makefile): added cairo Oct 04 19:02:26 blogic * r9125 /packages/XOrg/lib/pango/ (. Makefile patches/): added pango Oct 04 19:02:49 blogic * r9126 /packages/XOrg/app/fontconfig/ (. Makefile): added fontconfig Oct 04 19:03:20 blogic * r9127 /packages/XOrg/lib/gtk-2.8.20/ (. Makefile): added gtk+-2 Oct 04 20:13:27 [florian], ping Oct 04 20:13:37 <[florian]> slapin_nb: pong Oct 04 20:14:11 [florian], :) default kernel does not have support for mtdchar, so mtdtools doesn't work Oct 04 20:14:59 [florian], I've updated that page with what bootloader outputs in case of bootp and ice mode, might be interesting. Oct 04 20:16:51 [florian], http://ossfans.org/DI524UP/ Oct 04 20:24:20 <[florian]> slapin_nb: thanks Oct 04 20:24:26 <[florian]> I go to bed, see you tomorrow Oct 04 20:25:05 [florian], good night Oct 04 20:58:13 blogic * r9128 /trunk/target/linux/x86/ (12 files in 6 dirs): added subtargets to x86 Oct 04 21:39:56 ryd * r9129 /packages/net/tcpdump/Makefile: update tcpdump to 3.9.8 Oct 05 00:27:53 nbd * r9130 /trunk/package/busybox/ (53 files in 22 dirs): Oct 05 00:27:53 Upgrade busybox to 1.7.2 Oct 05 00:27:53 - clean up insmod crap Oct 05 00:27:53 - add some lineno/programname fixes for awx Oct 05 00:27:53 - clean up awk getopt stuff Oct 05 00:27:54 - remove unnecessary patches Oct 05 00:28:34 yay Oct 05 00:38:20 nbd * r9131 /trunk/package/busybox/patches/ (990-upstream_tail_fix.patch 991-upstream_logger_fix.patch): add upstream fixes for 1.7.2 Oct 05 00:48:19 WEEEEEEEEEEEEEEEEE Oct 05 00:48:23 * Weedy licks nbd Oct 05 00:51:18 nbd, wheres lspci? Oct 05 00:51:39 oh right pciutils Oct 05 00:51:41 NVM Oct 05 01:44:02 nbd, i built kmod-acx-mac80211 but it didnt build kmod-crypto-arc4 and kmod-crypto-aes Oct 05 01:44:25 looks like it selects them but not the main crypto-core Oct 05 01:44:51 could it be that those are compiled into the kernel? Oct 05 01:44:52 please check Oct 05 02:03:27 well i just tried to install the ipkg Oct 05 02:05:56 nbd, does the new kmod-acx-mac80211 allow AP stuffs? Oct 05 02:06:03 probably not Oct 05 02:06:10 you're lucky if it even works Oct 05 02:06:28 should i use normal kmod-acx then? Oct 05 02:07:05 that won't do ap mode either, iirc Oct 05 02:14:49 poop Oct 05 02:18:17 with some luck kmod-acx will work in master mode. wep only though **** ENDING LOGGING AT Fri Oct 05 02:59:57 2007