**** BEGIN LOGGING AT Fri Jan 04 02:59:56 2008 Jan 04 03:05:19 I really must sleep no; thanks again florian for all the AR7 tweaks Jan 04 03:05:23 *now Jan 04 03:13:40 florian * r10106 /trunk/package/util-linux-ng/Makefile: Package mount and umount Jan 04 03:32:36 florian * r10107 /packages/net/asterisk-1.4.x/Makefile: Fix asterisk-1.4.x compilation with speex Jan 04 04:05:05 florian * r10108 /trunk/package/acx/Makefile: Bump release number after the vlynq change Jan 04 04:05:34 florian * r10109 /trunk/target/linux/adm5120/ (router_be/config-2.6.23 router_le/config-2.6.23): Fix kernel configs with CONFIG_KEY Jan 04 04:20:27 florian * r10110 /trunk/target/linux/adm5120/router_le/base-files/sbin/wget2nand: First check for arguments before even getting an IP address **** BEGIN LOGGING AT Fri Jan 04 05:20:12 2008 Jan 04 05:51:35 florian * r10111 /packages/utils/strace/ (Makefile patches/001-arm_eabi_syscalls.patch): Fix strace compilation with ARM EABI (#2951) Jan 04 06:34:39 florian * r10112 /trunk/target/linux/adm5120/files/drivers/leds/leds-adm5120.c: Leds have been tested on rb111/112 and rb153 Jan 04 07:14:43 florian * r10113 /trunk/package/broadcom-wl/files/lib/wifi/broadcom.sh: Set country before channel (#2958) Jan 04 07:56:11 still at it huh?! Jan 04 07:56:13 :) Jan 04 12:17:52 kaloz * r10114 /trunk/target/linux/ixp4xx/patches-2.6.23/300-avila_fetch_mac.patch: Jan 04 12:17:52 Fixes the MAC address handling on avila NPE on startup Jan 04 12:17:52 Replaces/based-on 740-avila_loft_mac_platform.patch for 2.6.21 Jan 04 12:17:52 Signed-off-by: Harald Schioeberg Jan 04 13:06:59 high, any german w900v user here? Jan 04 14:17:38 guess you found someone in #ar7 ? Jan 04 14:28:49 h3sp4wn: poke Jan 04 14:29:31 juhosg * r10115 /trunk/target/linux/adm5120/files/drivers/leds/leds-adm5120.c: [adm5120] fix led driver (closes: #2972) Jan 04 14:39:56 Kaloz here ? Jan 04 14:40:47 exovii: barely.. saw your mail but dunno where to start remotely Jan 04 14:48:49 So, are you fine ? Jan 04 14:50:08 I'm sick but I'll be better :) Jan 04 14:51:18 The same for me and my family... a little difficult beginning... Jan 04 14:51:36 But we're on the right way ! Jan 04 14:52:57 I saw you committed many changes for ixp425, so i went to hear good news ! ;) Jan 04 14:53:40 I installed the last Netgear firmware on the FVX, and this is always the same piece of crappy software... buggy, buggy, buggy.... Jan 04 14:54:17 Need reboot at least every 3 days... Really good for "professional" router, isn't it ? Jan 04 14:57:09 specially for that much money Jan 04 14:57:46 Nope, i bought that for about 60 euros... Not that expensive... Jan 04 14:58:13 But now i know why i did have such a price ! :D Jan 04 14:58:25 :) Jan 04 14:59:19 Do you think openwrt could install on this ? Jan 04 15:04:03 i'll be back !;) Jan 04 15:12:11 I'm back ! Jan 04 15:13:13 So, Kaloz, do you think OpenWRT could replace Netgear's crappy firmware ? Jan 04 15:13:45 with some work, probably - except the crypto engine, because there's no open driver for it Jan 04 15:14:23 No problem for the crypto engine, i don't think many people use hundreds of vpn ! Jan 04 15:15:33 AT what kind of work do you think ? Memory adjustments in Redboot ? Or something inside OpenWRT ? Jan 04 15:17:27 both Jan 04 15:17:45 Arf ! ;) Jan 04 15:20:13 And do you have sometime to do this modifications ? Which i could test of course... Jan 04 15:20:32 *some time* Jan 04 15:20:35 maybe later, the week after the next one or so Jan 04 15:20:49 ok, many thanks.... Jan 04 15:29:07 Don't you think that the modifications you made for WG302 are not enough ? Jan 04 15:29:38 s/Don't/Do Jan 04 15:32:09 each board needs different board code Jan 04 15:32:24 ok Jan 04 15:33:47 Are these codes here: root/trunk/target/linux/ixp4xx/patches ? Jan 04 15:35:19 trunk/target/linux/ixp4xx/patches-2.6.23 Jan 04 15:35:53 So, root/trunk/target/linux/ixp4xx/patches is an old directory ? Jan 04 15:36:53 the simple "patches" are for 2.6.21, as the FSG3's ide controller doesn't work with newer kernels, yet Jan 04 15:38:30 ok Jan 04 15:40:03 But there is only one (little) file for the WG302 ? Jan 04 15:40:05 Would it be the same for the FVX ? Jan 04 15:40:16 And 2 files for the WRT300N... Jan 04 15:41:45 wg302 support is already merged upstream, and none of the current board code would work on yhe fvx Jan 04 15:42:58 you mean, the modifications go to another place, once it is declared as "stable" ? Jan 04 15:50:29 exovii: my support code for the wg302v2 went to the mainline kernel Jan 04 15:50:55 Ah ok, thanks for the precisions... Jan 04 15:51:54 When you say 'mainline', is it the vanilla kernel ? Jan 04 15:52:40 yes Jan 04 15:53:33 Congratulations ! ;) Jan 04 15:55:06 So the modifications you made and that are now integrated in vanilla kernel are here: Jan 04 15:55:08 root/trunk/target/linux/ixp4xx/patches/300-wg302v2.patch Jan 04 15:55:09 Am i right ? Jan 04 16:16:44 Kaloz: hi Jan 04 16:18:11 kaloz * r10116 /trunk/target/linux/ixp4xx/patches-2.6.23/ (6 files): use the newer mac handling patches from nslu2-linux Jan 04 16:18:18 h3sp4wn: hey :) wanted to ask if you would upgrade the gateway's mac-address loading patch to the new method Jan 04 16:18:39 h3sp4wn: probably this one will be accepted upstream later Jan 04 16:19:49 Kaloz: Ok - We will see if I am capable (I still need to reflash with the new code anyway) Jan 04 16:33:03 Kaloz: i found ng-pci.c and ng-setup.c in the latest FVX538 source code (version 3.0.2-21). Jan 04 16:33:04 They seem as the ones i saw for WG302. Do they need modifications ? I mean, did you modify the ones you used for WG302, or not ? Jan 04 16:33:06 Thanks... Jan 04 17:05:41 exovii: the code for wg302 is from scratch Jan 04 17:06:30 Ah... Jan 04 17:07:39 So why copyright to Montavista, etc.... ? Jan 04 17:07:41 /* Jan 04 17:07:42 2 * arch/arch/mach-ixp4xx/wg302v2-pci.c Jan 04 17:07:44 3 * Jan 04 17:07:45 4 * PCI setup routines for the Netgear WG302 v2 and WAG302 v2 Jan 04 17:07:47 5 * Jan 04 17:07:48 6 * Copyright (C) 2006 Imre Kaloz Jan 04 17:07:50 7 * Jan 04 17:07:51 8 * based on coyote-pci.c: Jan 04 17:07:53 9 * Copyright (C) 2002 Jungo Software Technologies. Jan 04 17:07:54 10 * Copyright (C) 2003 MontaVista Software, Inc. Jan 04 17:07:56 11 * Jan 04 17:07:57 12 * Maintainer: Imre Kaloz Jan 04 17:07:59 Sorry for the long insert... Jan 04 17:08:58 It really seems like the files i saw in FVX source code... Jan 04 17:08:59 "based on coyote-pci.c" Jan 04 17:09:10 not the netgear files Jan 04 17:09:19 ok, thanks. Jan 04 17:09:36 The Netgear files are reusable, isn't ? It's GPL... Jan 04 17:10:50 sure, but they are for 2.4 and probably ugly coded Jan 04 17:11:27 Oh yes, i forgot... Jan 04 17:11:34 ugly: for sure ! ;) Jan 04 17:14:39 It's 2.6.10 :) Jan 04 18:26:17 Kaloz: as the Netgear sources contain 2.6.10 kernel, do you think the remainder of modifications is big ? Jan 04 19:21:03 my r10101 build last night had one other build failure in spca5xx-le: /linux-brcm47xx/spca5xx-le/spca_core.c:538:5: error: missing binary operator before token "(" Jan 04 19:42:12 pavlov * r10117 /packages/natpmp/: yank stagnant misplaced natpmp dir Jan 04 19:42:27 rwhitby: are you here ? Jan 04 21:52:10 exovii: whassup? Jan 04 21:53:03 i just saw that you are the master of ixp42x... Jan 04 21:53:10 Before, it was kaloz Jan 04 21:54:15 and i have to make my Netgear FVX538 a router for men ! ;) Jan 04 21:55:04 So i hope that one day, openWRT will run on this router, since the default Netgear firmware is (very very, so much) crappy ! Jan 04 21:55:44 exovii: Kaloz is still the master in openwrt for ixp42x. Jan 04 21:56:02 (unless we're talking about an nslu2) Jan 04 21:57:43 This page was modified: https://dev.openwrt.org/wiki/people Jan 04 22:06:54 exovii: ixp4xx is just a special case of ARM Jan 04 22:07:24 anyway, do you have kernel source for that router? Jan 04 22:12:11 it's 2.6.10 in the latest source code. Jan 04 22:12:45 i'm sorry i though there was some changes in the staff... Jan 04 22:13:05 no, no changes. Jan 04 22:13:09 ok ;) Jan 05 01:59:57 hey florian, I've had a day of perfect wireless on the AR7 ;) Jan 05 02:17:20 nabcore: i have a patch for newer DSL driver Jan 05 02:17:22 will you test it? Jan 05 02:17:29 nabcore: how the wifi works? Jan 05 02:18:57 sorry matteo was afk Jan 05 02:19:00 sure I will Jan 05 02:20:50 wifi is working really well. I've had it in Master mode with WEP today and I'm actually speaking to you via it now Jan 05 02:21:35 nabcore: cool Jan 05 02:21:38 [florian]: good job Jan 05 02:21:44 yup :) Jan 05 02:44:06 matteo * r10118 /trunk/package/ar7-atm/ (6 files in 2 dirs): [AR7] updated DSL driver and firmware (closes #2532) **** ENDING LOGGING AT Sat Jan 05 02:59:57 2008