**** BEGIN LOGGING AT Mon Jun 01 02:59:57 2009 Jun 01 08:04:58 florian * r16240 /trunk/target/linux/ar7/files/arch/mips/ar7/ (setup.c time.c): [ar7] remove old 2.6.24 code Jun 01 08:07:42 florian * r16241 /trunk/target/linux/generic-2.6/patches-2.6.30/ (023-mips_delay_gcc4.4.0.patch 202-mips-freestanding.patch): [kernel] refresh 2.6.30 patches Jun 01 08:11:38 florian * r16242 /trunk/target/linux/ar7/ (10 files in 2 dirs): [ar7] add experimental 2.6.30 support, boot tested Jun 01 08:48:39 hcg * r16243 /trunk/package/base-files/files/etc/hotplug2-init.rules: [hotplug2] Removed extra ; in exec rule Jun 01 09:19:43 claudio * r16244 /trunk/target/linux/etrax/config-2.6.30: [etrax] enable optimize for size, avoid to trigger gcc bug #36482 Jun 01 09:21:35 <_trine> [hotplug2] Removed extra ; does this mean the code should work again for the AR71 routers? Jun 01 09:22:01 <[florian]> _trine: on all devices actually Jun 01 09:22:15 <_trine> Ok I'll give it a try Jun 01 09:22:19 <_trine> and report back Jun 01 11:21:09 <_trine> [florian]: it does not connect to the internet Jun 01 11:21:25 <_trine> the webif gui can be connected to Jun 01 11:22:03 <_trine> but there is no internet connection although it has acquired an IP address via dhcp Jun 01 11:22:15 <_trine> there is also no ssh and no telnet Jun 01 12:45:01 kaloz * r16245 /trunk/target/linux/generic-2.6/config-2.6.30: fix typo and add nand_gpio to the generic config Jun 01 12:45:52 kaloz * r16246 /trunk/target/linux/generic-2.6/patches-2.6.30/990-fix_feroceon_vfp_handling.patch: fix VFP handling on feroceon cores Jun 01 12:46:26 kaloz * r16247 /trunk/target/linux/generic-2.6/patches-2.6.30/991-mv643xx_eth_coherent_dma_mask.patch: fix mv643xx_eth dma mask Jun 01 12:50:28 kaloz * r16248 /trunk/target/linux/kirkwood/patches/001-openwrt_partition_map.patch: even if we don't support booting from the nand yet, change the rootfs name for OpenWrt Jun 01 12:50:36 kaloz * r16249 /trunk/target/linux/kirkwood/patches/002-mvsdio_delay.patch: fix compatibility with certain SD cards Jun 01 12:51:21 kaloz * r16250 /trunk/target/linux/kirkwood/patches/ (003-gating.patch 004-cpuidle.patch): add patches to support the advanced power management on Kirkwood socs Jun 01 12:52:31 kaloz * r16251 /trunk/target/linux/kirkwood/image/Makefile: increase kernel partition to 4MB, generate jffs2 images Jun 01 13:23:53 kaloz * r16252 /trunk/target/linux/kirkwood/ (Makefile config-default): fixup sheevaplug support (for now we use sdcards for rootfs) Jun 01 14:04:09 kaloz * r16253 /trunk/package/kernel/modules/crypto.mk: another 2.6.30 related crypto fix Jun 01 14:11:39 lars * r16254 /packages/libs/glib2/Makefile: [package] Update glib2 to 2.20.3 Jun 01 14:32:35 acinonyx * r16255 /trunk/package/hostap-driver/files/lib/wifi/hostap.sh: [hostap-driver] Add diversity option Jun 01 14:37:14 nico * r16256 / (4 files in 4 dirs): (log message trimmed) Jun 01 14:37:14 [package] broadcom-wl: fix broadcom (2.4) wireless sta (only) mode, adjust release number Jun 01 14:37:14 This patch fixes an issue with the broadcom.sh configuration script when Jun 01 14:37:14 enabling sta mode. Currently sta mode works provided that you have an AP Jun 01 14:37:14 enabled as well but it doesn't work if you have a sta interface but not an Jun 01 14:37:17 AP. I found that merely reversing the order of the ap and apsta variables Jun 01 14:37:19 in the broadcom.sh script corrects this problem, and the attached patch does Jun 01 14:58:15 nico * r16257 /branches/8.09/package/iptables/Makefile: [8.09] [package] iptables: bump v1.3.8 release number after r16145 Jun 01 15:23:14 mirko * r16258 /feeds/efl/ (32 files in 25 dirs): upgrade efl-stuff, cleanup Makefiles, add elementary and its python-bindings, fix weird errors, looking forward to new ones Jun 01 15:32:35 \o/ Jun 01 16:10:04 nico * r16259 /branches/8.09/package/base-files/files/etc/banner: [8.09] [package] base-files: adjust banner for upcoming 8.09.1 release Jun 01 16:17:49 nico * r16260 /branches/8.09/package/opkg/ (Makefile files/opkg.conf): [8.09] [package] opkg: adjust download url for upcoming 8.09.1 release, bump release number Jun 01 17:25:21 lars * r16261 /packages/Xorg/driver/xf86-input-tslib/patches/025-XI3.patch: [packages] make xf86-input-tslib compile with XInput version >= 3. Jun 01 17:26:54 lars * r16262 /packages/Xorg/driver/xf86-video-glamo/Makefile: [package] xf86-video-glamo: utils-macros is a build dependency. Jun 01 17:38:40 hauke * r16263 /trunk/package/mac80211/Makefile: Jun 01 17:38:40 [mac80211] B43 needs CONFIG_RFKILL_INPUT not only CONFIG_RFKILL. Jun 01 17:38:40 Fixes #5245. Jun 01 17:40:56 hauke * r16264 /trunk/target/linux/generic-2.6/config-2.6.30: [kernel] Add missing kernel symbol. Jun 01 18:07:34 kaloz * r16265 /trunk/target/linux/gemini/config-default: optimize the kernel for size... *sigh* Jun 01 18:07:45 nbd * r16266 /trunk/package/base-files/files/lib/network/config.sh: network: do not unnecessarily touch interfaces configured as proto=none; bring down old aliases before setting up new ones Jun 01 18:08:09 kaloz * r16267 /trunk/target/linux/gemini/patches/ (002-wbd111_support.patch 003-wbd111-static-flash-map.patch): register the watchdog on the wbd111 Jun 01 18:08:40 kaloz * r16268 /trunk/target/linux/gemini/image/Makefile: generate squashfs images Jun 01 18:09:06 nbd * r16269 /trunk/package/base-files/files/lib/network/config.sh: network: prevent unnecessary interface down/up cycles if no mac address change is requested Jun 01 18:09:11 kaloz * r16270 /trunk/package/madwifi/Makefile: fix madwifi for the gemini target Jun 01 18:09:37 kaloz * r16271 /trunk/target/linux/gemini/base-files/ (. etc/ etc/preinit.arch): fixup mac addresses on gemini boards Jun 01 18:09:52 nbd * r16272 /branches/8.09/package/base-files/files/lib/network/config.sh: merge r16266, r16269 to 8.09 Jun 01 18:10:19 kaloz * r16273 /trunk/target/linux/gemini/Makefile: use squashfs on the gemini by default, remove broken flag Jun 01 18:15:31 kaloz * r16274 /trunk/ (3 files in 3 dirs): now that the gemini target is working, get rid of the obsolete and buggy storm target Jun 01 18:16:11 kaloz * r16275 /trunk/target/linux/generic-2.6/ (config-2.6.23 patches-2.6.23/): remove 2.6.23 support, as the last target using that has been nuked, too Jun 01 18:20:10 nbd * r16276 /trunk/target/linux/generic-2.6/files-2.6.23/ (29 files in 8 dirs): remove some more obsolete files Jun 01 18:27:53 florian * r16277 /trunk/target/linux/brcm63xx/files/drivers/net/bcm63xx_enet.c: [brcm63xx] backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time Jun 01 18:30:10 nico * r16278 /branches/8.09/target/linux/ (454 files in 20 dirs): [8.09] kernel: refresh patches Jun 01 19:14:59 agb * r16279 /tags/8.09.1/: tag 8.09.1 Jun 01 19:15:09 \o/ Jun 01 19:15:43 I didn't do it. :) Jun 01 19:31:07 quick question, when adding support for a new board, what is the best method of placing files? I've been changing things in my buildroot, but that'll get wiped out with a make clean. Jun 01 19:32:29 what exactly are you chaning? Jun 01 19:33:04 adding support for the Sparklan WAPD170AG, so stuff in arch/arm/mach-ixp4xx Jun 01 19:34:07 so you're changed kernel code under build_dir? Jun 01 19:34:11 changing Jun 01 19:34:55 yep, copying a couple of things from ADI Coyote -> wpad170ag, changing the makefile in there Jun 01 19:36:09 that's a temp dir, will be wiped out during 'make clean', keep a diff file somewhere else, then apply it there after you did 'make clean', or you can put a patch directly under target/linux/your-board Jun 01 19:37:04 thanks, will give it a go, i guess it's because most of the patches i;m lloking at are changes. new file is just a diff against nothing I guess. Jun 01 20:03:48 kaloz * r16280 /trunk/target/linux/generic-2.6/config-2.6.30: add missing config option Jun 01 20:31:25 kaloz * r16281 /trunk/target/linux/generic-2.6/patches-2.6.30/998-openwrt_lzma_options.patch: use the openwrt lzma options for now Jun 01 20:31:51 florian * r16282 /trunk/tools/lzma/ (4 files in 2 dirs): [tools] port lzmp that is packaged by debian, build it, but do not install it yet Jun 01 21:08:27 kaloz * r16283 /trunk/target/linux/orion/config-default: we don't use RedBoot on orion Jun 01 21:09:41 kaloz * r16284 /trunk/target/linux/generic-2.6/patches-2.6.30/960-arm_lzma_loader.patch: temporary, hackish, etc, etc.. lzma support for the arm zImage loader Jun 01 21:32:41 So I'm trying to mess around with UCI via a small C program, mostly just to get values and print them because I'm at that Hello World phase Jun 01 21:33:11 looking around on the forum it seems that the swconfig package is a good example to look at Jun 01 21:33:39 though uci.h is included in my program, I get undefined reference errors for any function in there Jun 01 21:34:31 Also, I can't seem to find the functions themselves, eg, uci_load, uci_perror, etc... Jun 01 21:36:09 maybe this helps too: http://www.l2gvpn.org/trac/browser/trunk/uci.c (a wrapper around libuci) and http://www.l2gvpn.org/trac/browser/trunk/l2gvpn.c (user of this wrapper, read only) Jun 01 21:40:57 xMff, Thanks, I love you Jun 01 21:42:14 ;) Jun 01 21:42:24 I used this to get started with C and uci Jun 01 21:43:06 <_trine> forgive me for being homophobic Jun 01 21:45:49 lol Jun 01 21:46:30 aport`: told the wrong file, http://www.l2gvpn.org/trac/browser/trunk/node.c this contains the actual config loading Jun 01 21:46:48 beginning from L86 Jun 01 21:53:16 my problem is that I'm missing something Jun 01 21:53:27 I get undefined reference errors to any of the uci functions Jun 01 21:53:52 you included both uci.h and uci_config.h ? Jun 01 21:53:57 yep Jun 01 21:55:15 with <> or "" ? Jun 01 21:55:30 <> Jun 01 21:55:49 hmm should work then Jun 01 21:56:28 it does, I'm just an idiot Jun 01 21:58:52 I wasn't compiling with -luci Jun 01 21:58:58 ah Jun 01 21:59:02 yeah Jun 01 21:59:17 sweet, it works Jun 01 22:14:03 nbd * r16285 /trunk/target/linux/generic-2.6/ (4 files in 4 dirs): ocf: fix uninitialized variable access (thx, Dakon) Jun 01 22:14:08 nbd * r16286 /trunk/package/swconfig/Makefile: swconfig: fix kernel version dependency Jun 01 22:14:12 nbd * r16287 /trunk/target/linux/generic-2.6/ (config-2.6.30 patches-2.6.30/670-phy_ip175c.patch): add ip175c switch driver patch to 2.6.30 Jun 01 22:14:17 nbd * r16288 /trunk/target/linux/atheros/ (13 files in 2 dirs): atheros: add working patches/config for 2.6.30 Jun 01 22:35:49 nbd * r16289 /trunk/package/madwifi/patches/ (432-backport_oops.patch 432-netdev_ops.patch): madwifi: fix wlanconfig athX destroy on 2.6.30 (incomplete netdev_ops transition) Jun 02 00:56:11 mirko * r16290 /trunk/target/linux/s3c24xx/patches-2.6.30/040-rename-serialdevs.patch: rename serial devices for 2.6.30 as well to avoid uneeded mappings in userspace Jun 02 01:39:44 hi Jun 02 01:39:44 Can someone please help me port OpenWRT to the Cisco Catalyst 3524 XL switch? Jun 02 02:03:14 mib_w02elm: can you send me one? **** ENDING LOGGING AT Tue Jun 02 02:59:57 2009