**** BEGIN LOGGING AT Sun Jun 14 02:59:57 2009 Jun 14 03:14:23 russell_: file tickets for those package build failures? Jun 14 03:32:03 nbd * r16442 /trunk/target/linux/generic-2.6/files/drivers/net/phy/ (ar8216.c ar8216.h): ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable) Jun 14 03:37:12 does anyone actually look at tickets? ;-) Jun 14 03:49:37 well, I would have to generally say not really Jun 14 03:53:59 hmm...ar71xx kernel failed Jun 14 03:54:08 http://mibbit.com/pb/FMWRB4 Jun 14 03:58:43 xxiao: add the orinoco subdir in the appropriate places? Jun 14 03:59:52 swalker: trying to locate it Jun 14 04:01:23 xxiao: package/kernel/modules/wireless.mk, although it should be looking in the correct directory as is Jun 14 04:03:55 xxiao: hrm, net-hermes-pci needs to be fixed for 2.6.30 Jun 14 04:11:20 just disabled hermes to get things going here, so far it looks ok after hermes is gone Jun 14 04:17:27 it's not bad that only 12 out of 1750 ipkgs failed to compile, 12 on armeb, 14 on mips Jun 14 04:36:17 xxiao: apply http://openwrt.pastebin.com/m3dd37551 and rebuild? Jun 14 06:11:39 xxiao, now someone just has to look at the failing compiles and fix them! ;-) Jun 14 06:12:09 doh! "xxiao has quit" Jun 14 06:24:16 russell_: I'll be fixing at least one or two failed compiles tomorrow Jun 14 06:26:03 Bartman007: sweet! but, really, i'd rather you figured out why the perl signal handling doesn't work. Jun 14 06:26:19 that's something i'd like to use, rather than just compile. Jun 14 06:26:47 ;-) Jun 14 06:27:54 me and perl... uh, we don't see like each other very much Jun 14 06:28:00 heh Jun 14 06:28:27 and even if we did, I don't think I'd know how to fix it unfortunately. Jun 14 06:28:35 * russell_ was so tickled that nocatauth ran on a wgt, if only it could reap its zombies now i'd be so much happier. Jun 14 06:29:19 i'm doing an x86 compile at the moment, but i think i'm going to try the older uclibc and see if that makes any difference Jun 14 06:30:16 that and the strace not following forks, which i'm guessing might be related Jun 14 07:04:52 cp -fpR /aux/src/openwrt/staging_dir/host/usr/lib/grub/i386-*/stage1 /aux/src/openwrt/staging_dir/host/usr/lib/grub/i386-*/stage2 /aux/src/openwrt/staging_dir/host/usr/lib/grub/i386-*/e2fs_stage1_5 /aux/src/openwrt/build_dir/linux-x86_generic/ Jun 14 07:04:52 cp: cannot stat `/aux/src/openwrt/staging_dir/host/usr/lib/grub/i386-*/stage1': No such file or directory Jun 14 07:06:22 weird, it's right, there is no $(TOPDIR)/staging_dir/host/usr at all Jun 14 07:09:20 package/grub/{clean,compile,install} fixed that much, anyway Jun 14 09:30:32 * russell_ confirms that perl on uclibc .30.1 on x86 still works with r16442 Jun 14 09:30:55 (receives SIGCHLD, that is) Jun 14 09:36:14 that sort of eliminates the uclibc version Jun 14 09:39:46 hauke * r16443 /trunk/package/broadcom-diag/src/diag.c: Jun 14 09:39:46 D-Link DIR-320 support (broadcom-diag) Jun 14 09:39:46 This patch adds D-Link DIR-320 support to broadcom-diag. Jun 14 09:39:46 "reserved" button is the button on the right side of the router without Jun 14 09:39:46 any title. I'm not sure if I've selected right name. Jun 14 09:39:47 Signed-off-by: Leonid Evdokimov Jun 14 09:45:27 hauke * r16444 /trunk/target/linux/generic-2.6/ (7 files in 2 dirs): [kernel] refresh patches Jun 14 09:46:00 hauke * r16445 /trunk/target/linux/brcm47xx/patches-2.6.28/ (5 files): [brcm47xx] refresh patches Jun 14 10:15:23 * russell_ confirms that perl on uclibc .29 on mipsel-wgt634u is still broken on r16442, that sort of excuses the uclibc version being the problem Jun 14 10:21:14 <[florian]> so there is certainly something architecture specific which breaks in perl Jun 14 11:29:43 juhosg * r16446 /trunk/target/linux/ar71xx/patches-2.6.30/ (001-ar71xx_core.patch 300-mips_fw_myloader.patch): [ar71xx] refresh 2.6.30 patches Jun 14 11:36:21 hauke * r16447 /trunk/package/fuse24/ (6 files in 2 dirs): Jun 14 11:36:21 [fuse24] Some fixes for fuse24. Jun 14 11:36:21 Because sshfs expects character device to be /dev/fuse instead of /dev/misc/fuse, sshfs fails. Jun 14 11:36:21 This patch creates fuse device at /dev/fuse instead, also for compatibility the postinstall script (only executed when manually installed per opkg) creates /dev/misc/fuse Jun 14 11:36:21 added the dcache enabled kernel message to fuse24 Jun 14 11:36:25 Closes #5333 Jun 14 11:37:00 hauke * r16448 /trunk/target/linux/brcm-2.4/patches/016-fuse-ntfs-3g-mips.patch: Jun 14 11:37:00 [brcm-2.4] This patch adds some vital exports for fuse24 to the kernel. (forgotten in #5186) Jun 14 11:37:00 Closes #5333 Jun 14 11:37:30 hauke * r16449 /trunk/include/kernel-version.mk: [brcm-2.4] Update kernel to 2.4.37.2 Jun 14 11:38:28 juhosg * r16450 /trunk/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c: [ar71xx] setup mac address on the WNR2000 Jun 14 11:43:03 hauke * r16451 /trunk/package/fuse24/patches/111-uclibc_changes.patch: [fuse24] remove empty patch forgotten in r16447 Jun 14 12:03:52 hauke * r16452 /packages/ (7 files in 7 dirs): [packages] remove empty files and directories Jun 14 13:42:06 hauke * r16453 /packages/ipv6/dhcp6/Makefile: Jun 14 13:42:06 [dhcp6] dhcp6 needs PKG_BUILD_DIR in PKG_UNPACK. Jun 14 13:42:06 Fixes #5342. Jun 14 14:53:06 <_trine> I have just compiled and installed the newest code on one of my wrt54gs ver 1.1 routers Jun 14 14:53:37 <_trine> but when I tell it to reboot either from webif or from ssh it does not Jun 14 15:36:11 trine: are you using trunk? Jun 14 15:36:12 with kernel 2.6.28 or 2.6.30? Jun 14 15:39:14 <_trine> I just compiled trunk Jun 14 15:39:24 <_trine> did svn up Jun 14 15:39:36 <_trine> and compiled about 40 minutes ago Jun 14 15:39:52 <_trine> I am not using it rith now Jun 14 15:40:06 <_trine> I went back to my normal router Jun 14 15:40:28 <_trine> s/rith/right Jun 14 15:41:16 what version was the last running version? Jun 14 15:47:28 <_trine> Hauke, not sure now Jun 14 15:47:35 <_trine> it's not powered up Jun 14 15:48:13 <_trine> I will power it up and tell you Jun 14 15:51:47 <_trine> KAMIKAZE (bleeding edge, r16449) - Jun 14 15:55:53 does noting happen, no message is displayed? Jun 14 15:56:12 <_trine> no Jun 14 15:56:14 <_trine> nothing Jun 14 15:56:50 <_trine> I have just noticed a difference between normal mode and failsafe Jun 14 15:57:29 <_trine> in normal mode after you issue the command reboot it does not reboot but it does stop responding to further commands Jun 14 15:57:50 <_trine> in failsafe it keeps on working Jun 14 15:59:57 did this ever worked? Jun 14 16:00:53 <_trine> do you mean on my other rooters Jun 14 16:01:32 no on the device it does not for now Jun 14 16:01:40 <_trine> no never Jun 14 16:01:52 <_trine> on this firmware Jun 14 16:02:04 <_trine> but on previous firmware yes Jun 14 16:02:19 on what? Jun 14 16:02:27 on which version? Jun 14 16:03:22 <_trine> well I don't normally use my wrt54gs on kamikaze but it was working as far as I can remember on 7.09 Jun 14 16:03:37 <_trine> and it is now working on my TEW632 Jun 14 16:04:54 <_trine> why should reboot not work on all routers? Jun 14 16:10:39 I don't know Jun 14 16:11:03 please open a ticket in trac with the problem Jun 14 16:20:04 <_trine> stupid trac ticket machine Jun 14 16:20:08 <_trine> Submission rejected as potential spam (Akismet says content is spam) Jun 14 16:34:53 <_trine> here's the ticket I was trying to put in but I can't be bothered to piss about with trac ticket. http://pastebin.com/m31610466 Jun 14 16:35:09 <_trine> someone else might like to do it Jun 14 16:35:36 hi [florian] i'm back. any sunday night trunk surprises for me? Jun 14 18:08:09 _trine: are you using kernel 2.6 or 2.4? Jun 14 18:11:14 <_trine> 2.4 Jun 14 18:16:16 _trine: https://dev.openwrt.org/ticket/5345 Jun 14 18:17:58 <_trine> Hauke, tnx Jun 14 18:18:15 <_trine> dunno why it told me it was spam Jun 14 18:23:45 the spam protecting system makes some problems Jun 14 18:24:58 <_trine> yes it seems so Jun 14 19:51:08 hello everyone Jun 14 19:54:06 I'm trying to build brcm-2.6 with 8.09.1 and it is not include wireless settings, that it's or I have some issue in my buildroot? Jun 14 19:55:52 fofware: the b43 driver for broadcom wireless was removed from 8.09.1 beacause it was relay unstable. Jun 14 19:56:16 if you need boradcom wireless with kernel 2.6 use trunk Jun 14 20:00:45 Ok, thanks very much , I'm trying with 8.09.1 because with trunk the result firmware is too big Jun 14 20:01:48 thanks againg, did make me creazy by 2 day, I did guess was something I did wrong Jun 14 20:18:51 hauke * r16454 /packages/multimedia/qc-usb/ (5 files in 2 dirs): [qc-usb] make it work with kernel 2.6.27 and 2.6.28. Jun 14 20:20:26 fofware: probably the missing wireless system makes the image small enough ;-) Jun 14 20:24:00 yeah Jun 14 20:42:14 nbd * r16455 /trunk/tools/mtd-utils/ (5 files in 2 dirs): upgrade to a more recent version of mtd-utils - preparation for adding UBI support Jun 14 20:42:20 nbd * r16456 /trunk/target/linux/generic-2.6/patches-2.6.30/980-vm_exports.patch: add missing function declaration for extra vm exports Jun 14 20:42:24 nbd * r16457 /trunk/tools/mtd-utils/ (Makefile patches/110-portability.patch): add ubinize to the mtd-utils build Jun 14 20:42:29 nbd * r16458 /trunk/tools/firmware-utils/ (Makefile src/nand_ecc.c): firmware-utils: add a small utility for generating nand flash images with ecc info Jun 14 20:42:37 nbd * r16459 /trunk/ (62 files in 5 dirs): add the 'goldfish' target, useful for experimenting with virtual phone hardware (includes the emulator) Jun 14 21:17:51 nbd * r16460 /trunk/ (22 files in 4 dirs): include a skin for the goldfish emulator Jun 14 21:38:07 rwhitby ping Jun 14 21:43:49 mirko * r16461 /packages/Xorg/xorg/lib/libX11/Makefile: remove not needed rpath-link option Jun 14 22:51:54 mirko * r16462 /packages/libs/orbit2/ (. Makefile patches/ patches/010-dont-run-testprograms.patch): add - a corba-compliant Object Request Broker implementation Jun 14 23:06:30 mirko * r16463 /packages/libs/gconf2/ (. Makefile): add package for (lib)gconf2 Jun 14 23:18:24 nbd * r16464 /trunk/target/linux/generic-2.6/patches-2.6.30/980-vm_exports.patch: 2.6.30: add another export for the binder module Jun 15 00:08:21 nbd * r16465 /trunk/target/linux/goldfish/patches-2.6.30/0118--ARM-goldfish-Add-goldfish-platform.patch: goldfish: fix clocksource api mismatch Jun 15 00:08:26 nbd * r16466 /trunk/target/linux/goldfish/config-2.6.30: goldfish: add missing kernel config options for power management Jun 15 02:28:03 hi guys, one question, If i want build only one package the syntax is make /package/mypkg V=99 Jun 15 02:29:39 make package/mypkg/compile V=99 Jun 15 02:29:54 thanks nbd **** ENDING LOGGING AT Mon Jun 15 02:59:57 2009