**** BEGIN LOGGING AT Sun Aug 16 02:59:57 2009 Aug 16 04:05:08 Hmm.. iwconfig wlan0 essid MyEssid gives: SET failed ... Operation not supported. Aug 16 04:05:37 sorry - that's not a dev qq. Aug 16 04:05:46 well .. maybe not. Aug 16 04:07:17 ah. get it. when it's in mode 'Master' it fails. Aug 16 04:07:52 gspca apply bump Aug 16 04:07:54 :) Aug 16 04:11:04 frogonwheels: hostapd installed? Aug 16 05:35:35 juhosg * r17283 /trunk/ (Config.in include/kernel-defaults.mk): add menuconfig option for selecting initramfs compression Aug 16 05:41:44 yeah. presumably that's where the ssid is. i'll get there. Aug 16 06:22:49 I'm having trouble editing the wiki Aug 16 06:23:05 are pages from oldwiki pages locked? Aug 16 06:23:12 s/oldwiki pages/oldwifi/ Aug 16 06:23:18 s/oldwifi/oldwiki/ :P Aug 16 07:45:37 juhosg * r17284 /trunk/target/linux/generic-2.6/patches-2.6.30/ (3 files): [kernel] 2.6.30: update layer7 patch Aug 16 08:51:40 http://openwrt.pastebin.com/m5fd997cb Aug 16 10:07:24 juhosg http://openwrt.pastebin.com/d4d03b0a1 Aug 16 10:12:12 @juhosg: does this happens also with RouterBOOT booter 2.19 ? Aug 16 10:13:26 %s /@juhosg/@Dogge_/ Aug 16 10:15:57 yeah, but not with 2.6.28.10 Aug 16 10:18:10 nico * r17285 /trunk/target/linux/uml/ (5 files in 3 dirs): [uml] bump to 2.6.30.4, apply fix from [15119] to x86_64 Aug 16 10:19:23 acoul can you open a ticket? Aug 16 10:21:14 nico * r17286 /trunk/package/ (mac80211/Makefile wprobe/Makefile): use KERNEL_CROSS instead of TARGET_CROSS to build kernel modules Aug 16 10:26:00 xMff ping Aug 16 10:26:24 nico * r17287 /trunk/package/wprobe/src/Makefile.inc: remove *printf warnings preventing wprobe to build on uml x86_64 Aug 16 10:40:40 juhosg acoul https://dev.openwrt.org/ticket/5709 Aug 16 10:52:46 @Dogge_: try this netboot image to see if it boots (you probably have to issue a make distclean before building the 2.6.30.x image) Aug 16 10:53:30 http://wifi.ozo.com/airo/openwrt/firmware/kamikaze/2.6/ar71xx/17131/openwrt-ar71xx-vmlinux-initramfs.elf Aug 16 11:24:17 Dogge_: this happens when the tftp server does not find the file, iirc Aug 16 11:29:37 juhosg but then, why does the tftp server finds the file when the kernel version is 2.6.28.10? Aug 16 11:36:01 dunno, but i know it is working (at least on RB-450): http://openwrt.pastebin.com/d618906dc Aug 16 11:37:45 strange Aug 16 11:38:24 you also get only one bad eraseblock. i get lots of them :( Aug 16 11:39:48 i'm using routerboot 2.20 Aug 16 11:43:11 where did you get it? routerboard.com contains 2.19 only Aug 16 11:51:18 can't remember. i'll try do downgrade to 2.19. maybe that fixes the problems Aug 16 12:02:31 juhosg now a have downgraded to routerboot 2.19. i'll now start a clean build Aug 16 12:14:02 Dogge_: ok. if you still have the old image, can you send it to me? Aug 16 12:39:49 juhosg * r17288 /trunk/package/kernel/modules/i2c.mk: Aug 16 12:39:49 Fix broken i2c module loading in R17269 Aug 16 12:39:49 Strip .ko suffix from module name. Aug 16 12:39:49 Fix typo in name of i2c-scx200-acb module to be loaded. Aug 16 12:39:49 Steve Aug 16 12:39:50 Signed-off-by: Steve Brown Aug 16 14:35:24 hello i have found that the svn version of jamvm (1.5.3) and classpath 0.97.2 are incompatible. I have addapted the the classpath Makefile to build classpath 0.98 and it works just fine... My question is: Is there a reason why classpath is outdated in the openwrt svn? Aug 16 14:37:32 is there a place to open a bug report and attach the solution to it? Aug 16 14:42:02 @stephan: https://dev.openwrt.org/newticket Aug 16 14:47:28 ok Aug 16 15:34:04 juhosg ping Aug 16 15:35:01 Dogge_: pong Aug 16 15:35:15 http://openwrt.pastebin.com/d33c7a90 Aug 16 15:36:35 yeah, i'm working on it atm Aug 16 15:36:43 okie :) Aug 16 15:37:15 btw, it works with gzip Aug 16 15:37:41 i'll try Aug 16 15:38:41 changing it and running make again should be enough, right? Aug 16 15:38:56 yup Aug 16 15:41:53 will the sd card slot on the 433uah supported at any time? Aug 16 15:42:17 s/sd/microsd/ Aug 16 15:47:16 yes, probably. when someone will send a patch for it, or when i can get another RB-4xx which has uSD slot Aug 16 15:57:34 juhosg okie. http://openwrt.pastebin.com/d3b0ba3a3 - what is all this 'bad eraseblock' spam? Aug 16 15:59:28 juhosg does it help if i give you remote serial console access to my rb433uah to get the microsd supported Aug 16 16:24:52 Dogge_: nope, sorry. i don't undertake the risk that i may brick someone else's 120EUR board Aug 16 16:26:21 okie Aug 16 16:32:34 juhosg on the rb433uah has three nics (eth0, eth1, eth2). why is there only eth and eth1 accessible on openwrt? Aug 16 19:21:23 juhosg * r17289 /trunk/target/linux/generic-2.6/patches-2.6.30/998-openwrt_lzma_options.patch: [kernel] 2.6.30: fix lzma compressed intitramfs support, and decrease dictionary size Aug 16 19:55:12 juhosg * r17290 /trunk/package/mac80211/ (Makefile patches/100-cfg80211-fix-deadlock.patch): [package] mac80211: add deadlock fix patch Aug 16 22:13:07 ndb: ping Aug 16 22:15:42 opss!! Aug 16 22:15:52 nbd: ping Aug 16 22:19:22 xMff: ping Aug 16 23:02:06 Anyone with commit get a chance to look at the gspca patch Aug 16 23:44:14 ^^ bump as I'm anxious :) Aug 17 00:39:57 Hello, Im trying kamikaze on my x86 builded from trunk with LuCI.(tried both 0.8 and 0.9) On LuCI's Initscripts page one can see the services and eneable/disable them with a hook in a checkbox. My problem is that I cannot turn off services there, the hook comes back when I press the submit button. Is this a known issue? Or maybe just my build. **** ENDING LOGGING AT Mon Aug 17 02:59:56 2009