**** BEGIN LOGGING AT Mon Jan 18 02:59:56 2010
Jan 18 04:17:13 <CIA-88> swalker * r19212 /packages/lang/luasec/Makefile: [packages] luasec: update to 0.4
Jan 18 04:24:09 <CIA-88> swalker * r19213 /packages/libs/libidn/Makefile: [packages] libidn: update to 1.16
Jan 18 05:38:46 <CIA-88> jow * r19214 /trunk/package/base-files/ (Makefile files/etc/sysctl.conf): [package] base-files: disable bridge firewalling by default
Jan 18 09:01:43 <CIA-88> juhosg * r19215 /trunk/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c: rtl8366_smi: use inline function instead of a macro on top of container_of
Jan 18 09:01:46 <CIA-88> juhosg * r19216 /trunk/target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c: ar71xx: fix ethernet mac address on the WZR-HP-G300NH
Jan 18 09:01:49 <CIA-88> juhosg * r19217 /trunk/target/linux/ar71xx/base-files/etc/defconfig/ (dir-825-b1/network tl-wr1043nd/network wndr3700/network):
Jan 18 09:01:49 <CIA-88> ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
Jan 18 09:01:49 <CIA-88> Also drop the default network configuration of the TL-WR1043ND, because
Jan 18 09:01:49 <CIA-88> the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
Jan 18 09:01:53 <CIA-88> juhosg * r19218 /trunk/target/linux/ar71xx/Makefile: ar71xx: add swconfig to the default packages
Jan 18 09:01:56 <CIA-88> juhosg * r19219 /trunk/target/linux/ar71xx/profiles/d-link.mk: ar71xx: update package list for the DIR-825 rev. B1
Jan 18 09:08:56 <CIA-88> juhosg * r19220 /trunk/target/linux/ar71xx/profiles/ (buffalo.mk d-link.mk linksys.mk netgear.mk planex.mk): ar71xx: the AR913x has no OHCI controller, remove that package from the relevant profiles
Jan 18 09:15:36 <CIA-88> juhosg * r19221 /trunk/target/linux/ar71xx/base-files/etc/preinit.arch: ar71xx: change failsafe message
Jan 18 12:31:51 <_trine> I have a few problems with wifi on the wndr3700 and one of them is that wlan0 does not show an ssid and it only seems to broadcast anything when I also bring up wlan1 the 5GHz radio
Jan 18 12:32:40 <_trine> http://pastebin.com/m19aae1df
Jan 18 12:34:03 <_trine> http://pastebin.com/m3b642f72
Jan 18 12:35:51 <_trine> http://pastebin.com/m60e4a78b
Jan 18 12:40:05 <_trine> when I disable wlan1 wlan0 stops TX ing  on the wndr3700
Jan 18 12:41:31 <_trine> but even when wlan0 is TX ing when wlan1 is enabled wlan0 never shows an ssid
Jan 18 14:18:10 <CIA-88> nbd * r19222 /trunk/package/mac80211/patches/100-compat_firmware.patch: mac80211: fix firmware compat stuff for 2.6.32
Jan 18 16:30:51 <xiangfu> Hi How to only compile kernel?
Jan 18 16:31:13 <xiangfu> Is there a way to only compile the kernel?
Jan 18 16:32:00 <rtz> xiangfu: switch to build_dir, the kernel is somewhere there
Jan 18 16:32:01 <nbd> make target/install
Jan 18 16:32:12 <rtz> or maybe os
Jan 18 16:32:13 <rtz> so
Jan 18 16:32:16 <nbd> assuming that you've compiled the rest already
Jan 18 16:32:27 <nbd> this will build the kernel and images
Jan 18 16:32:42 <xiangfu> nbd. yes. have compiled the reset.
Jan 18 16:32:49 <nbd> ok, then use that ;)
Jan 18 16:33:05 <xiangfu> compiling ... :-)
Jan 18 16:46:59 <CIA-88> juhosg * r19223 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: create rescue image for the WZR-HP-G300NH
Jan 18 19:26:04 <rtz> is the led code supposed to be compiled directly into the kernel or build as a module?
Jan 18 21:53:51 <rtz> [florian]: ping
**** ENDING LOGGING AT Tue Jan 19 02:59:57 2010