**** BEGIN LOGGING AT Mon Mar 15 02:59:57 2010 Mar 15 03:59:15 thepeople * r20225 /trunk/package/linux-atm/ (Makefile patches/200-no_libfl.patch): fixup linux-atm package after the broken patch earlier Mar 15 04:54:58 does anyone know if tc has been fixed recently? Mar 15 07:51:01 build #26 of kirkwood is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/kirkwood/builds/26 Mar 15 09:03:33 build #26 of au1000 is complete: Failure [failed shell_3 compile_6] Build details are at http://tksite.gotdns.org:8010/builders/au1000/builds/26 Mar 15 09:15:43 build #34 of brcm47xx is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/brcm47xx/builds/34 Mar 15 09:32:19 juhosg * r20226 /trunk/target/linux/orion/files/arch/arm/mach-orion5x/dt2-setup.c: Mar 15 09:32:20 orion: drop DECLARE_MAC_BUF usage from the DT2 support file Mar 15 09:32:20 * fixes build error on 2.6.33 Mar 15 09:32:20 * closes #6863 Mar 15 11:02:06 build #33 of sibyte is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/sibyte/builds/33 Mar 15 11:03:32 juhosg * r20227 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: change DIR-600-A1 image generation template, will be usable for other boards Mar 15 11:03:35 juhosg * r20228 /trunk/target/linux/ar71xx/base-files/sbin/wget2nand: ar71xx: don't break the existing network configuration in the wget2nand script Mar 15 11:03:37 juhosg * r20229 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: build firmware image for the Fry's FR-54RTR board Mar 15 11:03:42 juhosg * r20230 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: create separated and smaller sysupgrade files for the DIR-615 and similar boards Mar 15 11:17:35 build #41 of ppc44x is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/ppc44x/builds/41 Mar 15 12:38:40 [florian]: ping Mar 15 13:06:22 <[florian]> rtz2: pong Mar 15 13:07:02 [florian]: did you have time to test the ar525w or create the dumps? Mar 15 13:07:48 <[florian]> rtz2: no sorry, I plan on doing this later this weekend Mar 15 13:10:29 [florian]: because I will need my sitecom as a running router in the near future and can't continue to use it as a dev platform (if the flash won't die completly) Mar 15 13:12:21 <[florian]> rtz2: ok, you said that already Mar 15 13:12:42 ok Mar 15 13:13:06 sorry, I can be pretty annoying from time to time :/ Mar 15 13:13:22 <[florian]> rtz2: you are not, I am delaying this too much Mar 15 13:29:18 juhosg * r20231 /trunk/target/linux/ar71xx/base-files/etc/init.d/defconfig: Mar 15 13:29:18 ar71xx: fix defconfig script to work with ImageBuilder Mar 15 13:29:18 * patch from #5722 Mar 15 14:02:50 nbd * r20232 /trunk/package/base-files/files/etc/init.d/network: base-files: reload switch settings on /etc/init.d/network start as well Mar 15 15:42:28 Is there a way to hardcode client HT capabilites in the Openwrt (wireless-tools?) source? I wonder because Apple seems to announce HT20 only in their drivers, resulting in 130Mbit/s max. Mar 15 17:45:08 this is just great, got around to looking at the homebox black flash issues, well, not too hard to fix for stopgap measures, but now I get a kernel oops Mar 15 17:46:06 I guess unbuffered reads are broken on cfi_cmd0001 Mar 15 17:47:42 oh, nm, can't be that Mar 15 18:15:36 <_trine> who maintains the ngircd package Mar 15 18:25:53 build #26 of adm5120 is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/adm5120/builds/26 Mar 15 18:31:00 thepeople * r20233 /trunk/package/linux-atm/ (Makefile patches/200-no_libfl.patch): actually fix linux-atm Mar 15 18:49:25 build #34 of sibyte is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/sibyte/builds/34 Mar 15 19:35:28 cshore: i am trying to flash my device now. couldnt get it done earlier, because i was unaware it rotted in my parents cellar and not at my place :| Mar 15 19:50:16 it flashed, but the device doesnt come up, my guess is, the firmware sets up the ethernet device as wan instead of lan Mar 15 19:50:31 i will get a serial console for confirmation Mar 15 19:50:33 brb Mar 15 20:02:24 obsy * r20234 /packages/net/transmission/Makefile: [packages] transmission: update to 1.92. Mark /etc/config/transmission as conffile. Mar 15 20:05:07 ok, there seems to be an issue with the module driver Mar 15 20:05:15 uhm the ethernet module Mar 15 20:05:45 eth0: link UP - 100/full - flow control off Mar 15 20:05:46 eth0: link DOWN Mar 15 20:05:52 thats what it continues to print Mar 15 20:14:15 <[florian]> icewaterman: no, there is probably a problem with how it monitors the link Mar 15 20:15:50 build #30 of cobalt is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/cobalt/builds/30 Mar 15 20:16:02 [florian]: http://pastebin.com/tzE1iAFK Mar 15 20:16:12 this is what happens when i do not plug the unit in Mar 15 20:17:04 <[florian]> icewaterman: I do not see any problem on your device Mar 15 20:17:15 <[florian]> icewaterman: I got several BCM96348GW here and they all work fine Mar 15 20:17:27 [florian]: this is only when there is no cable connected Mar 15 20:19:00 build #35 of brcm47xx is complete: Failure [failed shell_3 compile_6] Build details are at http://tksite.gotdns.org:8010/builders/brcm47xx/builds/35 Mar 15 20:19:30 [florian]: http://pastebin.com/Gs2PvWx1 Mar 15 20:19:49 [florian]: what might be trouble is the fact, that it only has 1 lan and 1 wan connector Mar 15 20:20:19 <[florian]> icewaterman: yes, this might need some adaptation Mar 15 20:21:34 what happened to the nvram? Mar 15 20:21:50 <[florian]> icewaterman: it is not used, so we do not make it available to users Mar 15 20:23:35 <[florian]> icewaterman: about your issue, I think you got two external PHYs not an internal one for eth0 Mar 15 20:24:28 [florian]: i have access via serial, tell me what you need to know i'll post it Mar 15 20:24:56 <[florian]> icewaterman: I have what I need here Mar 15 20:25:51 [florian]: btw. i guess wireless wont work for now, right? Mar 15 20:26:16 doesnt really matter, i am not keen on using it atm anyway Mar 15 20:26:55 <[florian]> icewaterman: it works Mar 15 20:27:16 [florian]: iwconfig shows no wireless extensions Mar 15 20:27:27 <[florian]> because you have to enable wireless in /etc/config/wireless Mar 15 20:27:41 [florian]: ah Mar 15 20:33:29 [florian]: one more thing: eth1 seems to be the wan port, while eth0 is the lan port. however the configuration of openwrt is exactly the reverse Mar 15 20:43:21 <[florian]> icewaterman: try to reverse the interface declarations in board_bcm963xx.c Mar 15 20:46:48 how do i change PHY in bcm63xx_enet.c? Mar 15 20:53:44 <[florian]> danitool: you have found ? Mar 15 20:53:51 <[florian]> danitool: ermm, you still have not found? Mar 15 20:53:58 no :( Mar 15 20:54:21 <[florian]> danitool: ok, hold on Mar 15 20:59:02 <[florian]> danitool: change it line 817 of drivers/net/bcm63xx_enet.c Mar 15 21:00:22 <[florian]> danitool: ermm, better, change it here: arch/mips/bcm63xx/dev-enet.c, line 152 Mar 15 21:00:36 ok Mar 15 21:01:08 <[florian]> it is currently set to 1, you can change it from 0 to 31 Mar 15 21:01:16 ping xMff Mar 15 21:02:36 [florian]: even if i try to manually configure eth1 (give it an ip, mask etc) it seems unusable (cant even ping) Mar 15 21:02:54 <[florian]> icewaterman: you probably need a different setup, like vlans or something Mar 15 21:03:12 <[florian]> icewaterman: do you have a switch or external phy on eth1? Mar 15 21:03:27 [florian]: how would i find out? Mar 15 21:03:56 <[florian]> icewaterman: either read the original firmware bootlog, or open the box and check the components references Mar 15 21:06:28 [florian]: http://oldwiki.openwrt.org/OpenWrtDocs%282f%29Hardware%282f%29T%282d%29Com%282f%29Speedport_W500V.html this is the original firmwares bootlog Mar 15 21:06:31 but isn't it the phy for eth0?, i need to change it on eth1 Mar 15 21:06:37 (at the bottom) Mar 15 21:06:56 <[florian]> danitool: no, you can change it on both, but I think the current code will not allow you to change the phy address for an external patch Mar 15 21:07:02 <[florian]> danitool: you are using a livebox or livebox pro? Mar 15 21:07:25 livebox Mar 15 21:07:30 Inventel DV4210 Mar 15 21:08:18 <[florian]> danitool: is this a recent device? Mar 15 21:08:26 <[florian]> danitool: how many ethernet ports have you? Mar 15 21:08:27 no, old one Mar 15 21:08:48 i have two ports Mar 15 21:08:52 two eth ports Mar 15 21:09:15 marked as yellow and red Mar 15 21:09:28 but only yellow eth0 works Mar 15 21:09:58 <[florian]> ok, I will prepare a patch for you to test tomorrow Mar 15 21:10:09 ok Mar 15 21:10:51 other people told me the same problem with openwrt on that router Mar 15 21:13:19 <[florian]> icewaterman: about your issue, I do not see anything which should not make it work for eth0 at least Mar 15 21:13:32 <[florian]> icewaterman: but for eth1, I do not know if you really have two ethernet devices on your board Mar 15 21:13:41 <[florian]> icewaterman: I mean, two different eth devices, do you? Mar 15 21:14:02 [florian]: ifconfig shows eth0 and eth1 Mar 15 21:14:09 of which eth1 is attached to br-lan Mar 15 21:14:41 <[florian]> icewaterman: this is the default configuration for bcm96348gw Mar 15 21:15:05 <[florian]> icewaterman: this identifier has been reused by manufacturers, while they should have changed it Mar 15 21:15:23 <[florian]> icewaterman: but the underlying hardware might have nothing in common with this reference design Mar 15 21:16:17 [florian]: physically both look different Mar 15 21:16:39 <[florian]> icewaterman: looking at ifconfig from the original log, you will not have any eth1 usable Mar 15 21:17:27 [florian]: hmm, i used another free firmware (bitswitcher) for this device and i can use the second connector to attach my cable modem Mar 15 21:17:50 <[florian]> icewaterman: ok, let me check then Mar 15 21:17:57 i will flash that firmware and see what it shows in the bootlog to set this up Mar 15 21:19:09 hopefully i can flash it again Mar 15 21:26:51 [florian]: what boot protocol does cfe use? Mar 15 21:26:58 i can boot images via net Mar 15 21:27:13 is it tftp? Mar 15 21:27:33 <[florian]> icewaterman: it is Mar 15 21:28:34 <[florian]> icewaterman: I am off to bed now Mar 15 21:29:53 [florian]: thx for your help, i will see Mar 15 21:30:08 whether i get the working image back and will return with new info tomorrow Mar 15 21:30:42 <[florian]> icewaterman: do not hesitate to play with ethernet driver and see what you get Mar 15 21:32:39 [florian]: i do not have a build environment yet, will need to bake that first Mar 15 21:34:49 [florian] you were right, original firmware only has eth0, no eth1 Mar 15 21:37:21 [florian]: even worse, it seems i was also wrong about the routers ability to run a cable modem Mar 15 21:37:58 <[florian]> icewaterman: ah, so everything's fine then :p Mar 15 21:38:23 [florian]: not quite, eth0 still does go on and of Mar 15 21:38:24 f Mar 15 21:38:33 <[florian]> right Mar 15 21:39:44 though i cannot use that box as a router anyway. however it still might serve well as a repeater or something Mar 15 21:42:36 however who cares, i will just get a linksys for 40 bucks, wrt54gl is quite cheap atm Mar 15 21:47:19 i need to order a microwave anyway Mar 15 22:00:43 icewaterman: you can have my old one: works fine, just big....too bad shipping is crazy, or it'd be an easy solution Mar 15 22:02:03 cshore: no one local seems to want it (free!) even though it works fine...I've posted on the local Freecycle list several times Mar 15 22:02:32 s/cshore/icewaterman/ Mar 15 22:04:37 icewaterman: wonder if I'd have better luck asking money for it (on the theory that ppl might thing there is something wrong with it at free) Mar 15 22:16:42 cshore: sorry, i was busy ordering stuff Mar 15 22:16:59 np Mar 15 22:17:20 cshore: yeah, the shipping might be a problem, where do you live? Mar 15 22:17:28 Canada Mar 15 22:17:40 cshore: ok, shipping might indeed be a problem :-) Mar 15 22:17:53 cshore: i am currently living in germany Mar 15 22:18:01 yeah, that wouldn't work too well Mar 15 22:18:51 icewaterman: I'm just trying to find someone who wants because it works and I hate to throw it out Mar 15 22:19:05 nbd: ping Mar 15 22:19:06 cshore: my guess is ppl want modern stuff like 300Mbit wireless-N. they only care about numbers not what it really can do Mar 15 22:19:22 icewaterman: true Mar 15 22:20:34 cshore: i just looked it up, seems like shipping is not that bad Mar 15 22:20:49 as long as it is <2kg Mar 15 22:21:42 cshore: you should offer it for 1$ plus shipping, people tend to like that. when something is free, it looks suspicious like you said Mar 15 22:22:22 icewaterman: good idea....I don't care about the money, just not throwing it out since it works Mar 15 22:22:49 icewaterman: but it's over 2kg Mar 15 22:23:13 cshore: in germany people are so stupid, 10 years ago, they truely believed that phone company is giving phones away for 1€ (of course you had to cover for the 24 months several €/month contract fees. Mar 15 22:23:31 cshore: too bad, cause that is really expensive to ship overseas Mar 15 22:23:48 icewaterman: yeah, and power might be different anyway Mar 15 22:24:07 110/120 AC here Mar 15 22:24:22 cshore: AC? are you sure? afaik 110 is DC Mar 15 22:24:29 120 AC 60 Hz Mar 15 22:24:46 110 if you take the RMS (or something like that) Mar 15 22:25:13 hmm, ok, in europe it is 220-230V AC and some 50 years ago it was 110 DC Mar 15 22:25:56 rtz2: pong Mar 15 22:26:30 cshore: hey, but wait, i know a guy in canada, maybe he can use it. i'll ask him if you dont mind, shipping inside canada shouldnt be too expensive Mar 15 22:26:54 icewaterman: sure Mar 15 22:28:03 nbd: I did get my wrt160nl and tested the patch Mar 15 22:28:17 nbd: works without problems, so it would be nice, if you could commit it Mar 15 22:28:31 ok, got a link to the current version again? Mar 15 22:28:47 rtz2: me first, me first! :-P Mar 15 22:29:09 cshore: you want to commit it or what?!? Mar 15 22:29:23 rtz2: no I want my patch committed Mar 15 22:29:29 ahh Mar 15 22:29:38 which patch specifically? Mar 15 22:30:07 nbd: the /overlay /jffs one Mar 15 22:30:15 ok Mar 15 22:30:44 <_trine> it would be nice to change ngircd so it uses ssl now I have got that to work Mar 15 22:30:49 i'll see if i can find the time to look at both later Mar 15 22:30:54 currently packing my stuff for a trip to the US Mar 15 22:31:05 nbd: that would be cool, and sound cool Mar 15 22:31:25 <_trine> where in the US are you going to Mar 15 22:35:20 nbd: http://openwrt.pastebin.com/6Gng8WZK Mar 15 22:35:52 nbd: it's not a very complicated patch :) Mar 15 22:36:46 _trine: santa clara, ca Mar 15 22:36:56 <_trine> oh very nice Mar 15 22:37:08 <_trine> is it an holiday or working Mar 15 22:37:13 working Mar 15 22:37:15 nbd: you visiting Vertical, or someone else? Mar 15 22:37:26 someone else Mar 15 22:37:39 nbd: I was just there visiting Vertical Mar 15 22:37:50 ah, nice Mar 15 22:38:31 nbd: if you don't find the time before your trip, should I send it to the mailinglist? Mar 15 22:40:05 i have setup a tftpd to have cfe load images directly from that tftpd instead of flashing it Mar 15 22:40:17 main problem seems to be that it fails decompression Mar 15 22:40:28 on decompression Mar 15 22:40:37 pastebin? Mar 15 22:41:15 cshore: http://pastebin.com/ZXHJqsNa Mar 15 22:41:48 openwrt-96348GW-squashfs-bccfe-cfe.bin <- this is the file i renamed Mar 15 22:41:57 nbd: my boss (marca56@gmail.com) at Vertical would love to have you visit if you've got a chance Mar 15 22:43:47 rtz2: yes Mar 15 22:44:03 cshore: maybe i will have some time Mar 15 22:44:46 nbd: that address is also his Google Talk id if you want to IM him Mar 15 22:45:02 nbd: he's on most of the time Mar 15 22:45:29 cshore: so am i, but thats only due to my server & screen :-) Mar 15 22:45:41 cshore: thx, added him Mar 15 22:48:33 icewaterman: hmmm....I think [Florian] will need to look at that....I have no idea. Mar 15 22:49:17 icewaterman: unless it's the imagetag: what's that renamed file? Mar 15 22:49:39 icewaterman: what's the original filename? Mar 15 22:49:53 cshore: openwrt-96348GW-squashfs-bc300-cfe.bin als tried this: openwrt-96348GW-squashfs-bccfe-cfe.bin Mar 15 22:50:05 caus' the later one made more sense Mar 15 22:50:15 s/als/also Mar 15 22:50:22 grrrr i need a new keyboard Mar 15 22:50:32 dammit, this is going to be an expensive week Mar 15 22:50:59 icewaterman: actually bc300 is for the stock web interface Mar 15 22:51:14 cshore: which is why i tried the later Mar 15 22:51:36 icewaterman: but for some brcm63xx, you need the bcxxx version because the CRC's differ Mar 15 22:51:57 icewaterman: was it you I helped figure out which version you needed yesterday? Mar 15 22:52:13 cshore: yepp :) Mar 15 22:52:26 cshore: flashing via the webif worked fine Mar 15 22:52:46 icewaterman: but wouldn't boot after that? Mar 15 22:53:14 cshore: wouldnt say that, but it it didnt work as expected, meaning eth0 if went up and down in a loop Mar 15 22:53:35 icewaterman: hmmm....and now you can't flash successfully? Mar 15 22:53:42 cshore: i already did Mar 15 22:53:50 but why flash if you dont have to? Mar 15 22:54:00 icewaterman: I meant and have it boot Mar 15 22:54:26 cshore: yeah, reflashed the "old" bitswicher firmware Mar 15 22:54:29 worked just fine Mar 15 22:54:38 well at least as it did before Mar 15 22:54:49 icewaterman: and the pastebin is what you get when you flash via the cfe? Mar 15 22:54:58 cshore: no, flashing via cfe works Mar 15 22:55:10 thats how i got the old firmware back Mar 15 22:55:23 but cfe seems to be able to "load" the firmware without flashing it Mar 15 22:55:25 icewaterman: I meant the OpenWRT version Mar 15 22:55:29 which is kinda cool if you wanna test Mar 15 22:55:48 icewaterman: ah yes, I love the ramdisk Mar 15 22:56:25 cshore: the latest pastebin was from trying to have cfe load the openwrt image Mar 15 22:56:43 icewaterman: right... I think that's an imagetag problem Mar 15 22:56:44 which doesnt work properly, but some day it hopefully will *g* Mar 15 22:57:14 icewaterman: does it do the same think with a bc300 image? Mar 15 22:57:22 let me see Mar 15 22:57:53 cshore: yes Mar 15 23:02:19 cshore: http://bitswitcher.sourceforge.net/download.html Mar 15 23:02:27 its available from that website Mar 15 23:02:45 icewaterman: which one? Mar 15 23:02:48 cshore: i should add, that i cannot load this image directly either Mar 15 23:02:52 cshore: the first one Mar 15 23:03:24 lars * r20235 /packages/Xorg/lib/hippo-canvas/Makefile: [packages] hippo-canvas: Add dependency to libX11 drawing backend feature. Mar 15 23:03:30 icewaterman: you mean from cfe? Mar 15 23:03:36 cshore: yes. Mar 15 23:03:47 i can have cfe flash it via tftp Mar 15 23:03:53 but i cannot have cfe run it Mar 15 23:04:08 icewaterman: that's normal Mar 15 23:04:26 icewaterman: you need a special image to run from net verse from flash Mar 15 23:04:45 icewaterman: you need to use a ramdisk target for OpenWRT Mar 15 23:05:06 and the image will be named something like brcm63xx.elf Mar 15 23:06:21 cshore: since it tries to decrompress, maybe the .gz version could also work Mar 15 23:06:21 icewaterman: so if you flash, it works? Mar 15 23:06:37 cshore: the ethernet bug aside, yes Mar 15 23:06:39 icewaterman: I believe it uses lzma Mar 15 23:07:13 icewaterman: you need the ramdisk .elf version Mar 15 23:08:02 icewaterman: because the it actually an executable Mar 15 23:08:10 then it is Mar 15 23:09:31 cshore: do you mean this one: openwrt-livebox-vmlinux.elf ? Mar 15 23:12:09 icewaterman: no Mar 15 23:12:41 icewaterman: where you select Image Targets you have to select 'ramdisk' instead of 'squashfs' or 'jffs2' Mar 15 23:13:29 livebox is a for a specific device called the livebox Mar 15 23:13:45 AIUI Mar 15 23:13:50 cshore: ok, in that case i'll have to get my buildroot to work first (since the ramdisk images are not available from the website) Mar 15 23:14:01 icewaterman: right Mar 15 23:16:20 http://downloads.openwrt.org/backfire/10.03-beta/brcm63xx/packages/ wow, the package repository has increased since i last used openwrt Mar 15 23:21:11 ok, thx for your help cshore [florian], gtg, have to work again tomorrow. Mar 15 23:23:34 gnight Mar 15 23:36:58 what iptables module is MASQUERADE in **** ENDING LOGGING AT Tue Mar 16 02:59:56 2010