**** BEGIN LOGGING AT Fri Aug 27 02:59:57 2010 Aug 27 05:26:37 agb * r22821 /trunk/target/linux/gemini/patches/200-wbd222_support.patch: [gemini] update wbd222 patch after r22662 Aug 27 09:02:41 nbd: ping Aug 27 12:17:06 KanjiMonster: pong Aug 27 12:17:33 nbd: do you have by chance tried to access the dockstar through jtag? Aug 27 12:17:40 nope Aug 27 12:18:39 <_trine> KanjiMonster, just interested,, is this for a test or a need? Aug 27 12:18:43 because, to say it with an internet meme, "I dun goof'd" - I accidentially erased the whole flash Aug 27 12:19:27 (I am too accustomed to commands giving their help if issues without any parameters, which wasn't the case with "nand erase") Aug 27 12:19:49 ouch Aug 27 12:20:01 I do have a backup of the whole flash (at least of all 4 mtd partitions) Aug 27 12:20:36 <_trine> http://plugapps.com/forum/viewtopic.php?f=18&t=195 Aug 27 12:20:43 I tried restoring the bootloader, but it didn't work, after a reset it was dead Aug 27 12:21:50 I assume something with tftp didn't work right Aug 27 12:23:26 I previously tried restoring the original firmware, but it always claimed crc errors in the linux image (even though I verified the correct transfer from the device with md5sums) Aug 27 12:25:25 <_trine> this is interesting for other matters Aug 27 12:25:28 <_trine> http://jtag-bsdl.org/download.php Aug 27 12:29:23 <_trine> KanjiMonster, page 3 top of page Aug 27 12:29:44 <_trine> http://plugapps.com/forum/viewtopic.php?f=18&t=195&start=20 Aug 27 12:29:53 _trine: there is still the "I don't have a jtag adapter"-problem ;) Aug 27 12:30:16 <_trine> oh well that is a problem then Aug 27 12:30:31 <_trine> you cant hammer nails without an hammer Aug 27 12:32:54 nbd: do I have chances of finding someone with a jtag at the waveloeten who might be kind enough to restore the bootloader for me? Aug 27 12:34:09 _trine: currently I am in a small conflict, a new dockstar is cheaper than a jtag adapter ;) Aug 27 12:35:14 <_trine> http://cgi.ebay.co.uk/Wiggler-Universal-JTAG-Cable-Modem-Wireless-Routers-FTA-/280462473765?pt=BI_Electrical_Equipment_Tools Aug 27 12:35:58 <_trine> its only one chip you could make one Aug 27 12:37:32 _trine: I don't have a parallel port Aug 27 12:38:28 <_trine> if you were an old bugger like me you would have one :) Aug 27 12:38:59 <_trine> this is the one he used Aug 27 12:39:02 <_trine> http://www.tiaowiki.com/w/Universal_JTAG_User_Manual_%28Parallel%29 Aug 27 12:39:46 if I buy one, I intend to buy a ftdi-based one (I have my eyes on the amontec jtagkey2) Aug 27 12:39:56 BUY WITH CONFIDENT! <= uh .. yeah right Aug 27 12:40:21 <_trine> cunffidunt toothpaste Aug 27 12:41:50 <_trine> actually I have noticed a great number of competent computer code writer etc are not so good with language skills perhaps their minds are wired in a different way Aug 27 12:42:53 <_trine> I would not read anything into poor spelling and grammar when related to computer science Aug 27 12:47:31 except if you can see the writer used a chinese->english machine translation, then I would really question the quality of the product ;) Aug 27 12:49:16 <_trine> most stuff is made in China now so theres no geting away from it and mostly its of good quality these days Aug 27 12:51:16 <_trine> at the bottom of their page they show the unbuffered version which has direct connections to the parallel port Aug 27 12:51:35 <_trine> so in that case nothing else is needed Aug 27 12:57:55 I still need a parallel port ;) (well, ok, my board still has a header for it iirc, so I could buy a slot thingy for it) Aug 27 12:58:48 <_trine> This type of method might work for the dockstar if you had a parallel port Aug 27 12:58:50 <_trine> http://www.tiaowiki.com/w/Image:Xenondiag.jpg Aug 27 13:07:48 _trine: well, if choosing between paying ~20 euros for a parallel port and a jtag wiggler or paying 20 euros for a new dockstar, I would buy a new dockstar. I intend to buy the jtagkey (or something equivalent) eventually anyways, so it feels a bit like "wasted money" to me to buy a cheap jtag adapter now. Aug 27 13:22:57 parallel port jtag adapters suck Aug 27 13:23:17 <_trine> but they do work Aug 27 13:23:25 sometimes Aug 27 13:23:59 <_trine> and they cost next to nothing if you make one with four 100 ohm resisters Aug 27 13:24:15 In my experience they tend to be unreliable. Even those actively driven ones. Aug 27 13:24:27 <_trine> I would always consider that worth a shot Aug 27 13:24:46 Yeah it's good enough if you need it once a year to debrick a device Aug 27 13:24:59 But I would not consider using one for regular development Aug 27 13:25:02 <_trine> well yes i can agree with that Aug 27 13:25:53 <_trine> I use mine about once a year and 4 out of the 4 times was 4 years ago :P Aug 27 13:26:48 <_trine> they are whats called cheap and cheerful so if they work then all well and good Aug 27 14:34:23 for what purpose is this openwrt-ifxmips-uImage ? Aug 27 14:39:22 ok, forget it, found it, confusing about the u Aug 27 15:27:39 https://dev.openwrt.org/ticket/7638 and https://dev.openwrt.org/ticket/7817 could be closed Aug 27 16:14:54 mb * r22822 /packages/Xorg/lib/qt4/ (Config.in Makefile): qt4: Fix non-GUI build Aug 27 17:09:47 anyone any idea why "iw list" gets the allowed channels wrong as soon as I add a second ath9k card in an rspro ? 2x ath9k: http://openwrt.pastebin.com/fmPvitiz - 1x ath9k: http://openwrt.pastebin.com/Jq2wvHGm Aug 27 17:14:54 as a result I am unable to create a dualband AP :/ Aug 27 17:34:50 build #78 of adm5120 is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/adm5120/builds/78 Aug 27 17:45:16 marek * r22823 /packages/net/batman-advanced/patches/ (6 files): Aug 27 17:45:16 batman-adv: adding stability patches Aug 27 17:45:16 Signed-off-by: Marek Lindner Aug 27 17:56:39 stintel: do both cards have the same country code (or whatever its called)? Aug 27 17:57:13 KanjiMonster: how would I check that? Aug 27 17:57:41 and I do have the option enabled to override the regdomain Aug 27 17:57:58 ah, ok, then it shouldn't matter Aug 27 17:58:07 so I fail to see why it shouldn't work :( Aug 27 18:00:06 maybe I will just hack hostapd so it ignores the regulatory stuff Aug 27 18:00:34 crda and all is flakey and annoys the crap out of me Aug 27 18:06:31 if i erase a flash area and cp something there, i get a message "Flash not erased" but erase reported "done" and are is also unprotected, any reasons ? Aug 27 18:07:02 s/are is/area is Aug 27 18:29:49 stintel: with crda, all cards are limited to the lowest common denominator Aug 27 18:30:54 xMff: even when using the user regdomain override? Aug 27 18:31:02 not sure Aug 27 18:31:12 xMff: well both cards alone allow me to use ch36 Aug 27 18:31:12 I think in this case you need to change it for each phy (?) Aug 27 18:31:22 so something is wrong Aug 27 18:32:08 and I have option country be for both radios in /e/c/wireless Aug 27 18:32:20 I see, ok Aug 27 18:32:41 so I'm quite puzzled Aug 27 19:30:23 <_trine> there are quite a few people complaining that their dockstars have had the MAC changed and have been disabled remotely Aug 27 20:15:20 jow * r22824 /trunk/package/libreadline/Makefile: [package] libreadline: install *.so symlinks as well (#4872) Aug 27 20:18:52 I guess I should take my issue with crda to linux-wireless or b.k.o .. Aug 27 20:19:05 yes Aug 27 20:20:16 kinda sucks though, finally got everything to build a dualband AP and now there's this bug. first the stupid tplink card, now this Aug 27 20:20:19 like it never ends :) Aug 27 20:23:21 if anyone wants the tplink card let me know, otherwise I'll just throw it away Aug 27 20:23:57 but it's probably kind of useless anyway, old draft-n stuff Aug 27 20:59:25 someone fiddling on the danube-chips around ? Aug 28 01:35:18 build #75 of orion is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/orion/builds/75 **** ENDING LOGGING AT Sat Aug 28 02:59:57 2010