**** BEGIN LOGGING AT Tue Nov 16 02:59:58 2010 Nov 16 04:43:51 cshore: yet it should work, the uci track mechanism is quite ancient and never did change Nov 16 04:44:27 hmmm....well once I finish my build and get an image back I'll try again Nov 16 04:45:43 you are using a normal cbi map? Nov 16 04:48:06 xMff: I had problems with dnsmasq (hostnames) too when I tried, so it's something with the image, or files copied when I was testing. We'll see what happens with a fresh install Nov 16 04:48:38 ah, I had issues with extroot in the past due to b0rked permissions Nov 16 04:52:15 ah! that might do it Nov 16 04:52:31 in particular it had no access to /dev/log Nov 16 04:52:40 that was the final nail in the coffin Nov 16 04:52:58 what was borking the borking permissions? Nov 16 04:53:27 permission to bork, captain? Nov 16 04:53:59 I used packages from the snapshot builds and back then the buildbots ran with umask 077 Nov 16 04:54:15 that resulted in all .ips having permissions like 700 and 600 for dirs and files Nov 16 04:54:39 one installed package was enough to propagate the faulty permissions through the rootfs Nov 16 04:55:15 it should be fixed by now but you said your build is older Nov 16 04:56:40 dnsmasq is usually the only service failing as it is the only one which runs as nobody by default Nov 16 04:57:23 hmmm...okay, we'll see once my build is done (I updated everything) Nov 16 05:31:03 what compiler does the buildroot compile the tools with...a specific one, the default system one? Nov 16 05:32:09 because I've got code that compiles fine natively when when it's the tools subdir it does something different Nov 16 05:37:22 ah...must be long int vs unsigned long thing. Nov 16 05:38:03 not sure why it works natively actually Nov 16 06:53:30 cshore * r24011 /trunk/ (6 files in 3 dirs): (log message trimmed) Nov 16 06:53:30 [tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. Nov 16 06:53:30 * Rewrote commandline parsing code using gengetopt Nov 16 06:53:30 - We now get long options Nov 16 06:53:30 - We have more options including use of the info section for Nov 16 06:53:31 board information (e.g. to add the same boardid but Nov 16 06:53:32 different GPIOs on different routers) Nov 16 07:22:55 build #24 of octeon is complete: Failure [failed compile_7] Build details are at http://tksite.gotdns.org:8010/builders/octeon/builds/24 Nov 16 07:27:43 xMff: bad news...with a fresh build of latest sources I still get problems with luci's reload on config change (after Save & Apply, I see waiting for router, but nothing actually happens) Nov 16 07:32:19 <[florian]> sn9: do not bother much with the fixed phy Nov 16 07:32:54 <[florian]> sn9: it is only useful when no PHY can be detected, but link must be assumed to be on from the cpu perspective in order to still send packets Nov 16 07:32:59 [florian]: did you see the imagetag changes I did? Nov 16 07:33:44 <[florian]> cshore: not yet Nov 16 07:33:50 [florian]: it works, though Nov 16 07:34:02 <[florian]> sn9: if you fallback to fixed phy? Nov 16 07:34:05 yes Nov 16 07:36:52 <[florian]> sn9: fixed phy should always work, even if your phy or switch can be driven by a proper driver Nov 16 07:36:55 <[florian]> I am not surprised at all Nov 16 07:38:03 hello Nov 16 07:38:14 <[florian]> sn9: the question is more why mvswitch does not drive your switch correctly Nov 16 07:38:37 there is a long list of possibilities Nov 16 07:39:38 some clues are in actiontec's gpl tarball Nov 16 07:40:46 <[florian]> I am wondering if your switch is not just a slighty different revision of the 88e6060 Nov 16 07:40:53 no Nov 16 07:41:22 there is weird reset code in the tarball Nov 16 07:41:45 <[florian]> ah, that would explain why the mvswitch usual reset procedure did not work Nov 16 07:45:29 <[florian]> cshore: I am still fetching my mails Nov 16 07:47:31 <[florian]> cshore: why do not use gnu getopt? Nov 16 07:52:48 <[florian]> sn9: what is the reset sequence exactly doing? Nov 16 07:53:14 something with gpio's, i'd need to find it again Nov 16 07:56:54 <[florian]> ok, that kind of makes sense Nov 16 07:58:18 <[florian]> does not the bootloader already get the switch out of reset for you? Nov 16 07:58:32 i guess not Nov 16 08:03:07 <[florian]> so how do you load an mage to the device? Nov 16 08:03:18 <[florian]> from the running firmware? using xmodem? Nov 16 08:04:07 ftp Nov 16 08:04:19 from pspboot Nov 16 08:06:43 acoul * r24012 /trunk/target/linux/generic/patches-2.6.36/031-aligned_u64.patch: Nov 16 08:06:43 linux/generic: switch to userspace __aligned_u64 calls. Nov 16 08:06:43 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=79b5dc0c64d88cda3da23b2e22a5cec0964372ac (thank you hauke) Nov 16 08:11:12 <[florian]> sn9: so the switch is brought out of reset by the bootloader already :) Nov 16 08:25:00 acoul: ah, I think I know now how to fix the uclibc compile problem: by changing the rtnetlink.h. The netdevice.h #include got added to use the net_device struct in two functions, but these two are guarded by a #ifdef _KERNEL_, so the #include should probably also be guarded by that => should fix all compile problems in userspace Nov 16 08:28:37 @KanjiMonster: nice catch :) Nov 16 08:30:39 acoul: this is just theory for now, I still have to see if it really works ;) Nov 16 10:34:50 sn9, interesting glad somethings working tho Nov 16 10:52:34 hi, can i get some feedbac on patch for DNS323 i sent to openwrt-devel list? Nov 16 10:52:40 https://lists.openwrt.org/pipermail/openwrt-devel/2010-November/008548.html Nov 16 10:53:38 that is the second time i have submited patch for this device... Nov 16 10:59:22 404 Not Found Nov 16 10:59:29 luka12345: link dont work for me Nov 16 11:09:10 works fine here.. Nov 16 11:09:48 https://lists.openwrt.org/pipermail/openwrt-devel/2010-November/008548.html Nov 16 11:10:16 more info about this device Nov 16 11:10:17 http://dns323.lukaperkov.net/ Nov 16 11:23:59 acoul: dammit, somebody was faster than me: http://patchwork.ozlabs.org/patch/71237/ - but that means that I don't have to test anymore whether this really fixes it :) Nov 16 11:28:06 nice catch (again) Nov 16 11:28:42 acoul: btw, its not yet in -rc2 (which got released yesterday) Nov 16 12:08:09 ping xMff Nov 16 13:31:24 hi Nov 16 13:31:35 just stumbled over http://secunia.com/advisories/42279/ Nov 16 13:31:57 xMff: you know about this I guess? Nov 16 13:35:02 acoul * r24013 /trunk/target/linux/generic/patches-2.6.37/151-ingress_queue.patch: linux/generic: fix a dynamic ingress_queue allocation on 2.6.37. http://patchwork.ozlabs.org/patch/71237/ (thank you KanjiMonster) Nov 16 13:48:58 acoul * r24014 /trunk/ (3 files in 3 dirs): linux/generic: add kernel mppc/mppe for 2.6.37. http://yablochkin.net.ru/mppc/ (not enabled by default) Nov 16 14:08:08 aroscha: well, there *is* CRSF protection Nov 16 14:08:28 ? Nov 16 14:08:48 you just have to enable it? ;-) Nov 16 14:09:01 no, sorry. I guess I did not understand what you mean Nov 16 14:09:04 no its there by default and the submitter was talking BS# Nov 16 14:09:14 xMff: or using a really old version? Nov 16 14:09:33 "The application allows users to perform certain actions via HTTP requests without performing any validity checks to verify the requests." Nov 16 14:09:34 ah ok Nov 16 14:09:37 thats plain wrong Nov 16 14:09:49 ok Nov 16 14:10:42 there where indeed two XSS weaknesses Nov 16 14:11:07 which should be fixed Nov 16 14:11:27 unpatched status is wrong too... Nov 16 14:11:42 but these are some other xss vulns? Nov 16 14:12:04 anyway :) ... you are aware of the problem :)) sorry for bothering you ... just was not sure if you know about it Nov 16 14:12:10 well you can inject script code Nov 16 14:12:16 javascript Nov 16 14:12:16 ouch Nov 16 14:12:43 actually... Nov 16 14:14:17 acoul * r24015 /trunk/ (3 files in 3 dirs): target/linux: revert r24014 (further testing is needed) Nov 16 14:42:04 build #26 of ps3 is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/ps3/builds/26 Nov 16 15:37:05 dingo: ping Nov 16 18:29:44 nbd * r24016 /trunk/package/mac80211/patches/ (520-ath9k_fix_paprd.patch 530-ath9k_otp_rom.patch): ath9k: add some fixes for AR9003 Nov 16 18:32:28 whats status of "wrt610n" router does wlan and rest work with backfire or still not supported device Nov 16 18:41:24 ping [florian] Nov 16 19:11:55 build #23 of uml is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/uml/builds/23 Nov 16 19:13:23 build #32 of ppc40x is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/32 Nov 16 19:14:09 Just posted a patch for qos-scripts, let me know if anyone has questions Nov 16 19:14:20 s/posted/emailed/ Nov 16 19:14:49 build #28 of avr32 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/avr32/builds/28 Nov 16 19:16:21 build #23 of xburst is complete: Failure [failed shell shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/xburst/builds/23 Nov 16 19:20:03 build #26 of ixp4xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ixp4xx/builds/26 Nov 16 19:21:59 build #26 of kirkwood is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/kirkwood/builds/26 Nov 16 19:23:14 hm a builder without gcc :) Nov 16 19:23:18 ping thepeople Nov 16 19:23:22 build #28 of pxcab is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/pxcab/builds/28 Nov 16 19:24:53 xMff: I did a fresh build with non of my own stuff, and check dir perms....still not seeing the scripts restart when I Apply in LuCI (0.10)...trying 0.9 now to see if it's LuCI or something else Nov 16 19:25:14 cshore: put your /etc/config/ucitrack into pastebin please Nov 16 19:25:41 cshore: ah, and is luci-theme-base installed? Nov 16 19:26:06 build #29 of ar71xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ar71xx/builds/29 Nov 16 19:26:11 just a sec, booting the router Nov 16 19:26:13 build #29 of gemini is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/gemini/builds/29 Nov 16 19:27:47 build #25 of etrax is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/etrax/builds/25 Nov 16 19:27:52 hmmm...no luci-theme-base Nov 16 19:28:17 build #25 of iop32x is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/iop32x/builds/25 Nov 16 19:28:19 I don't see such a package Nov 16 19:28:20 that could be areason as it contains the js code which triggers the restart on the server Nov 16 19:28:48 the dependency was broken Nov 16 19:28:49 hmmm...ok, I'll poke around Nov 16 19:28:56 build #25 of ep93xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ep93xx/builds/25 Nov 16 19:28:57 I fixed it now Nov 16 19:29:21 ok, that would explain why it didn't get built Nov 16 19:29:44 build #25 of ifxmips is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ifxmips/builds/25 Nov 16 19:30:51 sorry, didn't think of that earlier Nov 16 19:31:33 build #25 of rdc is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/rdc/builds/25 Nov 16 19:31:50 build #26 of adm5120 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/adm5120/builds/26 Nov 16 19:33:53 build #25 of octeon is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/octeon/builds/25 Nov 16 19:37:18 build #33 of brcm63xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/brcm63xx/builds/33 Nov 16 19:38:59 build #25 of mpc52xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/mpc52xx/builds/25 Nov 16 19:39:06 build #29 of s3c24xx is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/s3c24xx/builds/29 Nov 16 19:40:06 build #31 of at91 is complete: Failure [failed shell shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/at91/builds/31 Nov 16 19:41:30 build #28 of ubicom32 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/28 Nov 16 19:42:31 build #31 of brcm47xx is complete: Failure [failed shell_6 compile_1 shell_13] Build details are at http://tksite.gotdns.org:8010/builders/brcm47xx/builds/31 Nov 16 19:43:26 build #33 of atheros is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/atheros/builds/33 Nov 16 19:44:14 build #30 of cobalt is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/cobalt/builds/30 Nov 16 19:45:05 build #30 of orion is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/orion/builds/30 Nov 16 19:46:08 build #27 of rb532 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/rb532/builds/27 Nov 16 19:46:54 build #28 of ppc44x is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ppc44x/builds/28 Nov 16 19:48:01 build #24 of uml is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/uml/builds/24 Nov 16 19:49:27 build #25 of x86 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/x86/builds/25 Nov 16 19:49:44 build #26 of ar7 is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/ar7/builds/26 Nov 16 19:51:15 build #28 of sibyte is complete: Failure [failed shell_6 compile_1] Build details are at http://tksite.gotdns.org:8010/builders/sibyte/builds/28 Nov 16 21:31:48 xMff: pong Nov 16 21:32:09 one of the builders is missing gcc apparently :) Nov 16 21:32:18 see above Nov 16 21:33:05 xMff: hmmm Nov 16 23:35:30 [florian]: ping Nov 16 23:59:04 is there active upstream project for hotplug2? Nov 16 23:59:30 I see there are patches lingering in OpenWRT repo, and upstream svn wasn't updated since initial import. Nov 17 00:16:30 the google one Nov 17 00:18:57 I wouldn't call the google one "active" ;) Nov 17 00:34:27 RealOpty: that's why I asked about active upstream, not just about upstream :-P Nov 17 00:34:57 * dottedmag wouldn't mind becoming an upstream Nov 17 00:35:35 I just want to make sure I'm not missing another person being a maintainer. Nov 17 00:36:00 dottedmag: iSteve (in this channel) is upstream Nov 17 00:36:26 iSteve: hi. would you like a couple of patches for hotplug2? segfault fixer included. Nov 17 01:38:35 KanjiMonster: pong **** ENDING LOGGING AT Wed Nov 17 02:59:57 2010