**** BEGIN LOGGING AT Sat Nov 27 02:59:58 2010 Nov 27 08:42:27 acinonyx * r24156 /packages/net/quagga/Config.in: [packages] quagga: Remove 'Config.in' file - not used since r24151 Nov 27 10:05:17 jow_laptop: hm, I can't compile libiwinfo without wireless stuff? http://pastebin.ca/2003568 Nov 27 13:34:44 what's the point of compiling libiwinfo without wireless to start with? Nov 27 14:16:20 it's pulled in by some dependency Nov 27 14:47:26 hrm, is strg-c supposed to be not working through serial while in failsafe? Nov 27 14:48:43 (using bcm63xx - strg-c through telnet in failsafe works) Nov 27 15:47:52 build #31 of x86 is complete: Failure [failed shell shell_4] Build details are at http://tksite.gotdns.org:8010/builders/x86/builds/31 Nov 27 16:05:45 hi Nov 27 16:06:05 I just tried to use extroot with rc4 and it backfired :/ Nov 27 16:06:43 in Failsafe mode I got an error message when after executing mount_root (I just executed mount_root only ... perhaps that's a mistake?) Nov 27 16:08:19 the mount_root script claims to be not able to find "/lib/functions/??_preinit_??" ... Nov 27 16:08:37 stupid me I did not copy over the exact error message... Nov 27 16:08:47 I will test my setup later this weekend Nov 27 16:09:16 perhaps my testing is mute anyway if it's already known Nov 27 16:10:34 I installed block-extroot on a sqaush fs rc4 build (still not intended ?) - Dir 825 B2 ar71xx squashfs install Nov 27 16:13:32 did you use ext4? Nov 27 16:16:40 hauke * r24157 /trunk/target/linux/generic/config-2.6.37: kernel: add missing config option Nov 27 16:24:29 loswillios: right, I'm not sure why it isn't conditional on one of the backends it supports being selected before being built Nov 27 16:28:54 swalker: because its hard to make everything optional Nov 27 16:29:46 that's what I had assumed Nov 27 16:31:24 but would be cool if you could try a patch Nov 27 16:33:17 hm and I have no idea how to test for "wifi" in menuconfig Nov 27 16:40:41 swalker: http://luci.subsignal.org/trac/changeset/6564 and http://luci.subsignal.org/trac/changeset/6565 Nov 27 16:41:06 its now selected by default if you select luci but you can deselect if you know you won't need it Nov 27 18:13:27 I'm thinking of making extroot not use the overlay for now. That is because even if it is possible to fix mini_fo with ext4 (which I'm not sure it is) it will take a while, so I'm thinking it would be better to have a plain filesystem Nov 27 18:14:44 I'm trying to make sense of mini_fo and ext4 but I don't have any experience fs devel, so I'm feeling overwhelmed by trying to figure it the code. Nov 27 18:21:39 ping xMff Nov 27 18:22:33 pong Nov 27 18:22:43 just blacklist ext4 Nov 27 18:23:32 cshore: in case you are wondering why there are no patches yet, I noticed ethernet not working in failsafe, and the scripts don't like power: as the power led, so I need to create some additional patches ;) Nov 27 18:23:37 yeah, just make extroot only work with a list of supported fs's... Nov 27 18:24:11 KanjiMonster: ah, probably because it defaults to eth1 for lan/switch Nov 27 18:25:25 KanjiMonster: you will need to use a /lib/brcm63xx.sh (IIRC) to set the ethernet to use during preinit (ifname I believe is what you want) Nov 27 18:25:30 cshore: yeah, setting the ifname to eth0 fixes it, more or less. The scripts for reconfiguring the switch only check for a switch on eth1, but it didn't do any noticable harm Nov 27 18:25:42 by not configuring it Nov 27 18:26:42 cshore: most is already fixed, I just have to put it in patches (currently working with a jffs root ;) Nov 27 18:27:00 ah, ok. No problem **** BEGIN LOGGING AT Sat Nov 27 18:44:20 2010 Nov 27 20:04:26 loswilios: hey Nov 27 20:38:10 jow * r24158 /branches/backfire/package/hostapd/ (3 files in 2 dirs): [backfire] backport r24041 Nov 27 20:44:09 bah, I hate broadcom crap Nov 27 20:44:38 no info on how to work with the @#$%@ things Nov 27 20:45:12 hehe Nov 27 20:47:33 Once I have a new job I'm going to buy a nice open source friendly router and work on it Nov 27 21:09:42 nbd_: can devices with an adm6996l work at all? Nov 27 21:18:41 anyone else know? Nov 27 21:18:53 loswilios? [florian]? Nov 27 21:22:23 i know the switch is not driven right, but is there a way to bypass the switch? Nov 27 22:19:15 nbd * r24159 /trunk/package/mac80211/patches/ (9 files): mac80211: add pending patches for throughput based led blinking and replace the broken ath9k blinking code with it Nov 27 22:26:55 nbd_: ? Nov 27 22:27:03 ? Nov 27 22:33:39 sn9: why wouldn't they? It worked fine in r12xxx Nov 27 22:33:56 nbd: what do you think of my making the extroot plain fs instead of overlay for now, due to the problems with ext4 and mini_fo not playing nicely together? Nov 27 22:34:17 loswillios: that was before there was a driver Nov 27 22:34:21 cshore: make it configurable Nov 27 22:34:27 cshore: and maybe change the default for ext4 Nov 27 22:35:00 well it affects ext2/3 as well (it's the ext4 driver that's the issue afaict) Nov 27 22:35:25 ? Nov 27 22:35:47 why would it affect ext2/3 if the ext4 driver is the issue? Nov 27 22:36:18 if you use ext2/3 fs (because that is done with the ext4 driver now). The ext2/3 drivers were eliminated Nov 27 22:36:24 unless that was a mistake? Nov 27 22:37:15 Kaloz added a few bogus dependencies Nov 27 22:37:32 maybe we should just revert those Nov 27 22:38:08 sn9: hm Nov 27 22:38:27 ah, I was confused. I was under the impression it was intentional Nov 27 22:38:35 it may have been Nov 27 22:38:43 but i still consider those dependencies bogus Nov 27 22:39:13 I meant ext2/3 disappearing Nov 27 22:39:25 didn't look at the dependencies Nov 27 22:39:34 the dependencies are the reason for ext2/ext3 disappearing Nov 27 22:39:38 right Nov 27 22:39:42 Kaloz put '@LINUX_2_6_30||LINUX_2_6_31' in there Nov 27 22:39:50 so i don't see how it would not have been intentional Nov 27 22:40:22 why would ext2/3 only got for 2.6.30/2.6.31? Nov 27 22:40:36 *go Nov 27 22:41:09 nbd * r24160 /trunk/package/kernel/modules/fs.mk: kernel: remove the bogus ext2/ext3 dependency on linux 2.6.30/31 - some people still want to use those modules Nov 27 22:41:24 no idea Nov 27 22:41:49 ok, thanks. Nov 27 22:42:03 I'll still do the configurable thing....it'll matter for ext4 Nov 27 22:42:22 ok Nov 27 22:43:47 sn9: so simply removing CONFIG_ADM6996_PHY will make it work again? Nov 27 22:44:24 loswillios: no, the support code is the issue, i'm guessing Nov 27 22:45:15 CONFIG_ADM6996_PHY should not be used right now Nov 27 22:45:27 mh, it is enabled Nov 27 22:45:32 yes, we should fix that Nov 27 22:45:52 it looks so close to working though: https://dev.openwrt.org/ticket/8187#comment:1 Nov 27 22:46:23 i think blogic was working on cleaning up and fixing that driver based on some patches by me Nov 27 22:46:33 but the driver is still incomplete and i don't know why it was enabled on ar7 in the first place Nov 27 22:47:30 I see. Gonna try a build without CONFIG_ADM6996_PHY Nov 27 22:48:27 nbd * r24161 /trunk/target/linux/ (9 files in 2 dirs): remove CONFIG_ADM6996_PHY=y for ar7 and atheros - this driver is incomplete and should not be used yet Nov 27 22:48:30 there. Nov 27 22:48:41 :) Nov 27 22:49:45 nbd: so, how should the interface be addressed in the absence of the driver? Nov 27 22:50:32 fixed phy or something like that Nov 27 22:50:38 just let the switch come up with default settings Nov 27 22:51:07 fixed phy says not found Nov 27 22:55:13 hauke * r24162 /trunk/target/linux/brcm47xx/patches-2.6.37/ (13 files): brcm47xx: reorder patches like they were commitet upstream Nov 27 22:59:04 nbd * r24163 /trunk/package/mac80211/patches/570-ath9k_fix_module_reload.patch: ath9k: fix module reload on ar713x based systems with ar92xx Nov 27 23:25:21 is there any way except a case block to test if a string begins with another string in bash scripts? [ "$var" == "bla"* ] doesn't work (at least for me) Nov 27 23:25:36 rather shell script Nov 27 23:26:09 * needs to be inside the "" Nov 27 23:26:17 and you need to use 'case' Nov 27 23:26:18 instead of == Nov 27 23:27:36 "except a case" <- I already know that with case it works ;) Nov 27 23:27:51 or should Nov 27 23:27:56 KanjiMonster: I believe there is: ${var%%or##can never remember which} Nov 27 23:29:50 er I lied Nov 27 23:29:57 that removes Nov 27 23:31:57 $(expr substr $var 1 3) == bla maybe? Nov 27 23:32:16 I prefer case Nov 27 23:32:25 yeah, its easier to read Nov 27 23:32:55 you working on brcm63xx.sh? Nov 27 23:33:01 x="foobar"; [ "${x#foo}" != "$x" ] && echo "begins with foo" Nov 27 23:33:57 sweet. I should have thought of that Nov 27 23:35:26 anyone know how to define the partition for a dual image CFE setup? Nov 27 23:35:31 *partitions Nov 27 23:36:12 it's not part of the image tag, so I think it's part of the actual CFE block Nov 27 23:41:00 build #36 of ubicom32 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/36 Nov 27 23:54:30 xMff: thanks, works perfectly :) (and lets me keep the delta to one line) Nov 28 00:22:30 anybody have a suggestion for doing ipv4 tunneling over ipv6 infrastructure? looks like normal openvpn 2.1 doesn't support using ipv6 for transit (you can tunnel ipv6, but can't run *on* ipv6). i want to build a bridged tap interface ipv4 thing on top of ipv6. anybody done anything like that? have suggestions? Nov 28 01:36:26 cshore: ping Nov 28 01:37:50 pong KanjiMonster Nov 28 01:39:02 cshore: I have more or less finished my patches, planning to post them tomorrow Nov 28 01:39:41 but first I need some sleep ;) **** ENDING LOGGING AT Sun Nov 28 02:59:57 2010