**** BEGIN LOGGING AT Tue Dec 07 02:59:58 2010 Dec 07 03:59:18 cshore * r24295 /packages/ (7 files in 7 dirs): [packages] Updated email address in packages I maintain **** BEGIN LOGGING AT Tue Dec 07 08:12:20 2010 Dec 07 09:42:17 * russell-- doesn't bother with luci himself but was putting together a system for someone else, fwiw Dec 07 10:30:14 ping thepeople Dec 07 10:30:59 ping Bartman007 Dec 07 10:45:11 acoul * r24298 /packages/libs/libevent/Makefile: libs/libevent: update to version 1.4.14b Dec 07 10:55:45 acoul * r24299 /packages/libs/curl/ (3 files in 2 dirs): libs/curl: update to version 7.21.2 Dec 07 12:21:47 acoul * r24300 /trunk/package/cyassl/ (5 files in 2 dirs): package/cyassl: update to version 1.6.5 Dec 07 13:00:44 build #40 of s3c24xx is complete: Exception [exception shell_4 failed slave lost shell_13 compile_12] Build details are at http://tksite.gotdns.org:8010/builders/s3c24xx/builds/40 Dec 07 13:00:46 build #44 of atheros is complete: Exception [exception failed slave lost shell_13 compile_12] Build details are at http://tksite.gotdns.org:8010/builders/atheros/builds/44 Dec 07 14:02:55 build #36 of ar7 is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/ar7/builds/36 Dec 07 14:49:24 acoul * r24301 /packages/libs/libpam/ (3 files in 2 dirs): libs/libpam: update to version 1.1.3, refresh patches Dec 07 15:14:29 build #38 of sibyte is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/sibyte/builds/38 Dec 07 15:15:46 cshore * r24302 /trunk/target/linux/brcm63xx/ (16 files in 2 dirs): Dec 07 15:15:46 [brcm63xx] Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 Dec 07 15:15:46 leds, not the generic 96348GW. Another commit will add the GW6200 specific Dec 07 15:15:46 boardid and leds. This removal reverts the 96348GW leds to the reference design Dec 07 15:15:46 GPIOs. Dec 07 15:15:51 cshore * r24303 /trunk/target/linux/brcm63xx/patches-2.6.35/150-led_count: [brcm63xx] board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit Dec 07 15:15:55 cshore * r24304 /trunk/target/linux/brcm63xx/patches-2.6.35/ (4 files): [brcm63xx] patches: Refreshed patches after led_count Dec 07 15:15:58 cshore * r24305 /trunk/target/linux/brcm63xx/ (3 files in 3 dirs): [brcm63xx] boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. Dec 07 15:19:59 acoul * r24306 /packages/net/usbip/ (Makefile patches/000-upstream_svn_152.patch): net/usbip: fix compile issue under SDK, refresh patches Dec 07 15:47:26 build #40 of ubicom32 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/40 Dec 07 16:42:30 cshore * r24307 /trunk/target/linux/brcm63xx/patches-2.6.35/500-mx29lv640t_flash_chip: Dec 07 16:42:30 [brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Dec 07 16:42:30 Thanks blunoise Dec 07 17:02:39 cshore * r24308 /trunk/target/linux/brcm63xx/patches-2.6.35/500-mx29lv640t_flash_chip: Dec 07 17:02:39 Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." Dec 07 17:02:39 This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5. Dec 07 17:02:39 It belongs in generic not brcm63xx. Dec 07 17:22:22 acoul * r24309 /packages/libs/libdnet/Makefile: libs/libdnet: fix compile issues. (closes #8365) Dec 07 17:32:35 cshore * r24310 /trunk/target/linux/brcm63xx/patches-2.6.35/ (141-led_count.patch 150-led_count): [brcm63xx] patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number. Dec 07 17:44:26 acoul * r24311 /packages/net/quagga/ (6 files in 2 dirs): net/quagga: fix uClibc-0.9.32/pthreads issues, refresh patches Dec 07 18:22:53 nbd * r24312 /trunk/package/mac80211/patches/320-pending_work.patch: ath9k: fix a null pointer deref issue Dec 07 19:45:14 cshore * r24313 /trunk/target/linux/generic/ (3 files in 3 dirs): [generic] flash_chips: Added Macronix MX29LV640T Flash Chip support previously mistakenly added to brcm63xx. Thanks blunoise. Dec 07 19:50:31 stupid netgear ... "CFE> help" -> "Invalid command: "help"" Dec 07 19:50:46 ? Dec 07 19:50:59 help is supposed to print the list of commands available in CFE Dec 07 19:51:26 but the cfe of the wnr2000v2 doesn't know "help" Dec 07 19:51:57 must have needed to save space Dec 07 19:54:58 i'ma have about 6 weeks of business travel to workout USB on my device.. Dec 07 19:55:18 but i think i need to call in the experts on this one. where's the usb experts? :D Dec 07 19:57:18 I'm no usb expert, but how about telling us first what device you are talking about ;) Dec 07 19:58:50 t-mobile branded WRTU54G-TM by linksys. Dec 07 19:59:10 is $15 nowadays and 64M ram, 8MB flash :D Dec 07 20:00:26 and has smartcard reader wired to usb.. you can remove reader and solder usb connector. then you have awesome $15 machine Dec 07 20:00:50 if only USB worked, of course... Dec 07 20:02:04 also has 2 phone ports, but i'm not porting that driver. noo way. i quit at USB Dec 07 20:28:40 neutronscott: With or without a contract ? Dec 07 20:29:02 (the $15) Dec 07 20:29:38 oh, they're end-of-life. is probably why it's $15 from random PC retailers online Dec 07 20:30:10 my mom was t-mobile employee and they was giving them away to anyone who wanted it. is how i got mine. :) Dec 07 20:36:39 has rt61pci wifi, the rt2x00 doesn't work well on machine at moment, but i am replacing the kthreads with tasklets, and it'll be OK again. Helmut is doing same for rt2800 Dec 07 20:38:17 Has it a mini-pci slot ? Dec 07 20:38:58 unfortionately not. Dec 07 20:39:36 Is it brcm47xx ? (I don't really even need wifi just something that can route 5MB/s Dec 07 20:39:50 and run qos-scripts acceptably Dec 07 20:39:59 it's a 200MHz MIPS 4Kc core. Dec 07 20:40:25 it's an end-of-life product by Infineon, the WildPass ADM8668 Dec 07 20:41:05 I am unsure what is needed to route 5MB/s wired.. Dec 07 20:41:37 I don't know I might just risk it (18 GBP is sod all) Dec 07 20:42:12 if you have a method to test i, i can do so tonight. Dec 07 20:42:37 i am unfamiliar with network simulations Dec 07 20:46:08 also, if you needed a switch driver, one is not yet available for 2.6 kernel.. Dec 07 20:46:59 Linksys gave me the source finally, but I personally have no need f[C[C[C[C[C[C[C[C[C[C[C[Cor it. Dec 07 20:57:35 ping thepeople Dec 07 20:57:39 ping Bartman007 Dec 07 22:29:25 build #43 of at91 is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/at91/builds/43 Dec 07 22:49:55 build #34 of octeon is complete: Failure [failed compile_2] Build details are at http://tksite.gotdns.org:8010/builders/octeon/builds/34 Dec 07 23:06:36 build #34 of etrax is complete: Failure [failed compile_3] Build details are at http://tksite.gotdns.org:8010/builders/etrax/builds/34 Dec 07 23:26:51 cshore_: PONG Dec 07 23:28:57 they thepeople: already been solved Dec 07 23:29:08 actually I do have another question for you Dec 07 23:30:12 thepeople: would it be possible to have place on the server to stash things like update debrick util, an imagetag analyzer I wrote, and code for a tool to snarf firmware images from flash memory (e.g. from stock firmware). Dec 07 23:39:04 nice, n-phy support getting testable for b43 Dec 07 23:40:07 KanjIMonster: is that a step toward multi-SSID? Dec 07 23:42:05 as far as I can see only generic support for n-phys not marked as broken anymore (and if I read it right no 5 ghz yet) Dec 07 23:51:14 cshore_: drop a email to the devel list Dec 07 23:51:22 cshore_: it might be Dec 07 23:51:30 cshore_: actually just drop me an email Dec 08 00:26:29 build #41 of s3c24xx is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/s3c24xx/builds/41 Dec 08 00:27:04 build #35 of kirkwood is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/kirkwood/builds/35 Dec 08 00:40:32 cshore * r24314 /trunk/target/linux/brcm63xx/ (5 files in 2 dirs): [brcm63xx] Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile Dec 08 00:40:35 cshore * r24315 /trunk/target/linux/brcm63xx/ (Makefile profiles/200-GW6X00.mk): [brcm63xx] Profiles: Make buttons and led modules included by default so that failsafe will work in the case of builds for releases. Dec 08 00:40:39 cshore * r24316 /trunk/target/linux/brcm63xx/profiles/200-GW6X00.mk: Dec 08 00:40:39 [brcm63xx] Profiles: GW6X00: Replace ext2 module with ext4 as ext2 and 3 are Dec 08 00:40:39 going away. Remove kmod-loop as the need for it has been superseded by Dec 08 00:40:39 block-extroot, and remove kmod-fs-vfat as it takes space and is rarely needed. Dec 08 00:45:03 build #34 of iop32x is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/iop32x/builds/34 Dec 08 00:46:25 build #43 of brcm47xx is complete: Failure [failed compile_6] Build details are at http://tksite.gotdns.org:8010/builders/brcm47xx/builds/43 Dec 08 00:47:11 for the proprietary broadcom is it wl or wlc that is needed? Dec 08 00:47:18 wlc Dec 08 00:48:03 xMff: thanks Dec 08 00:54:22 jow * r24317 /trunk/include/autotools.mk: Dec 08 00:54:22 [include] deploy the steamroller tactics and autoreconfigure any package carring the libtool fixup, Dec 08 00:54:22 this should solve a number of issues ranging from linking into the host, syntax errors in libtool and Dec 08 00:54:22 missing make targets Dec 08 00:57:17 jow * r24318 /packages/utils/collectd/ (Makefile patches/001-undefined-AM_PATH_LIBGCRYPT.patch): [packages] collectd: provide missing AM_PATH_LIBGCRYPT macro and autoreconf libltdl/ too (multiple libtools in one source, fun eh?) Dec 08 01:15:45 jow * r24319 /trunk/include/autotools.mk: [include] autotools.mk: if ./autogen.sh exists, call that. Call autoreconfig only if configure.in or configure.ac exists Dec 08 01:19:59 jow * r24320 /trunk/include/autotools.mk: [include] autotools.mk: allow autogen.sh / autoreconf to fail (for now) Dec 08 02:24:30 jow * r24321 /trunk/include/autotools.mk: [include] autotools.mk: allow disabling autoreconf, remove libdir fixup Dec 08 02:25:43 jow * r24322 /packages/libs/gdbm/Makefile: [packages] gdbm: don't autoreconf Dec 08 02:42:26 jow * r24323 /packages/libs/gettext/Makefile: [packages] gettext: don't autoreconf Dec 08 02:55:34 jow * r24324 /packages/libs/libiconv/Makefile: [packages] libiconv: don't autoreconf **** ENDING LOGGING AT Wed Dec 08 02:59:57 2010