**** BEGIN LOGGING AT Fri Jan 14 02:59:58 2011 Jan 14 09:43:06 hcg * r24979 /trunk/target/linux/omap35xx/gumstix/profiles/gumstix.mk: [omap35xx] Update gumstix profile Jan 14 10:41:50 juhosg * r24980 /trunk/tools/firmware-utils/src/wndr3700.c: firmware-utils/wndr3700: allow to specify image magic via command line Jan 14 10:41:54 juhosg * r24981 /trunk/tools/firmware-utils/src/mkdniimg.c: firmware-utils/mkdniimg: don't use NA region by default Jan 14 10:41:57 juhosg * r24982 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: build separate image for the WNDR3700 with NA region Jan 14 10:41:59 juhosg * r24983 /trunk/target/linux/ar71xx/image/Makefile: ar71xx: rework WNDR3700 image generation Jan 14 10:54:27 jow * r24984 /trunk/tools/mklibs/patches/009-uclibc_libgcc_link.patch: [tools] mklibs: import missing symbol workaround from Freetz project (#7590) Jan 14 10:57:40 nbd * r24985 /trunk/package/hostapd/files/hostapd.sh: (log message trimmed) Jan 14 10:57:41 hostapd: Create one control interface per virtual bssid Jan 14 10:57:41 Previously hostapd created one control interface /var/run/hostapd-phyX Jan 14 10:57:41 which only contained the first virtual bssid (for example wlan0). In Jan 14 10:57:41 order to access the other virtual bssids with hostapd_cli add all Jan 14 10:57:41 virtual bssids to /var/run/hostapd-phyX by specifying the ctrl_interface Jan 14 10:57:42 parameter per bssid. **** BEGIN LOGGING AT Fri Jan 14 11:39:04 2011 Jan 14 11:42:16 hmm. how to set the mtu for eth0.1? Jan 14 11:42:37 option mtu ? Jan 14 11:42:46 yeah, i tried that Jan 14 11:42:54 oh, wait, option to what? Jan 14 11:43:14 config interface Jan 14 11:43:24 yeah, that didn't work Jan 14 11:43:32 eth0.1 is a bridge port? Jan 14 11:43:41 jow_laptop: was about to ask the same Jan 14 11:43:42 :) Jan 14 11:43:53 i'mt trying to add it to a batman-adv interface Jan 14 11:44:17 config 'interface' 'wan' Jan 14 11:44:18 option 'proto' 'none' Jan 14 11:44:18 option ifname 'eth0.1' Jan 14 11:44:18 option 'mtu' '1527' Jan 14 11:44:28 (that was my wild guess) Jan 14 11:45:29 1527 ? Jan 14 11:45:56 does the ethernet core support jumbo frames ? Jan 14 11:45:57 jow * r24986 /packages/libs/curl/Makefile: [packages] curl: enable IPv6 if CONFIG_IPV6 is set (#8547) Jan 14 11:46:52 batman_adv: bat0: The MTU of interface eth0.1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1527 would solve the problem. Jan 14 11:47:59 * russell_ should probably ask the batman dudes Jan 14 11:49:09 dudeesses you mean :) Jan 14 11:54:11 lets be PC Jan 14 11:57:48 * russell_ doesn't judge ;-) Jan 14 12:00:15 yeah, the advantages of the interwebs, no race, ages, sex ... :) Jan 14 12:58:03 build #62 of orion is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/orion/builds/62 Jan 14 13:08:30 build #54 of x86 is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/x86/builds/54 Jan 14 13:08:39 hi, what would i use in opkg.conf in the buildroot to get the svn-revision in it? $R? Jan 14 13:10:23 we have no substitution for it there afaik Jan 14 13:11:36 ok. i remember you had a script for it somewhere but can't find it atm. Jan 14 13:16:15 but nevermind, i'll find a way ;) Jan 14 14:58:32 russell_: see *batman Jan 14 14:58:37 russell_: see #batman Jan 14 16:49:04 build #60 of gemini is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/gemini/builds/60 Jan 14 17:05:18 jow_laptop: Finally FreeSWITCH v1.0.7 has been released (http://freeswitch-users.2379917.n2.nabble.com/FreeSWITCH-1-0-7-tp5922408p5922408.html). So, can you please update the OpenWRT FreeSWITCH Makefile to reflect the new version? Jan 14 17:34:14 hi Jan 14 17:34:30 how can i turn of the ssid in /etc/config/wireless? Jan 14 17:34:34 of=off Jan 14 17:37:06 http://wiki.openwrt.org/doc/uci/wireless - check for hidden Jan 14 17:55:07 nbd * r24987 /branches/backfire/package/mac80211/ (Makefile patches/040-include_kfifo.patch): mac80211: include the kfifo backport in compat.ko if necessary (backport of r24978) Jan 14 18:08:25 build #63 of ppc40x is complete: Success [build successful] Build details are at http://tksite.gotdns.org:8010/builders/ppc40x/builds/63 Jan 14 18:20:16 Hi. Is openwrt supports DLink DIR-300NRU? Jan 14 18:23:53 juhosg * r24988 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/rtl8366rb.c: backfire: generic: add rtl8366rb switch port rate, port and qos enable/disable support (backport of r23126) Jan 14 18:23:57 juhosg * r24989 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/ (rtl8366rb.c rtl8366s.c): backfire: rt8366*: use __devinit instead of __init for the probe function to fix a section mismatch (backport of r23573) Jan 14 18:24:03 juhosg * r24990 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h rtl8366rb.c): Jan 14 18:24:03 backfire: generic: add rtl8366rb switch vlan fid support (backport of r24125) Jan 14 18:24:03 Allows to use fids 0 to 7. Default is 0. Jan 14 18:24:03 Those who will use this don't forget to `set vlan fid` every time Jan 14 18:24:03 after `set vlan ports` if you want non default behavior. Jan 14 18:24:04 Minor changes. Version bump. Jan 14 18:24:05 Signed-off-by: Roman Yeryomin Jan 14 18:24:05 juhosg * r24991 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/rtl8366rb.c: backfire: generic: rtl8366rb: use correct bitmasks in sanity checks (backport of r24930) Jan 14 18:24:09 juhosg * r24992 /branches/backfire/package/swconfig/ (Makefile src/swlib.c): backfire: package/swconfig: add sanity checks to prevent a segfault (backport of r24932) Jan 14 18:24:13 juhosg * r24993 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h): backfire: generic: rtl8366: add debugfs file for VLAN4K table (backport of r24933) Jan 14 18:24:17 juhosg * r24994 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/rtl8366s.c: backfire: generic: rtl8366s: add vlan fid support (backport of r24934) Jan 14 18:24:20 juhosg * r24995 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/rtl8366s.c: backfire: generic: rtl8366s: use correct bitmasks in sanity checks (backport of r24935) Jan 14 18:24:26 juhosg * r24996 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/rtl8366_smi.c: backfire: generic: rtl8366_smi: init VLANs only in first switch initialization (backport of r24936) Jan 14 18:24:29 juhosg * r24997 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/ (rtl8366_smi.h rtl8366rb.c rtl8366s.c): backfire: generic: rtl8366: add enable_port helper (backport of r24937) Jan 14 18:24:36 juhosg * r24998 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h rtl8366rb.c rtl8366s.c): backfire: generic: rtl8366: enable ports only after VLAN configuration is done (backportof r24938) Jan 14 18:24:40 juhosg * r24999 /branches/backfire/target/linux/generic-2.6/files/drivers/net/phy/ (rtl8366_smi.c rtl8366_smi.h rtl8366rb.c rtl8366s.c): backfire: generic: rtl8366: enable vlans before enabling the ports (backport of r24939) Jan 14 18:25:37 jeez Jan 14 19:12:42 build #65 of ubicom32 is complete: Failure [failed compile_4] Build details are at http://tksite.gotdns.org:8010/builders/ubicom32/builds/65 Jan 14 19:58:18 jow * r25000 /packages/net/vnstat/ (Makefile files/vnstat-uci.conf files/vnstat.init): [packages] vnstat: rework package, get rid of download stuff (this is better done externally), initialize db in init script, store monitored interfaces in /etc/config/vnstat Jan 14 20:47:46 KanjiMonster: ping Jan 14 20:47:53 OutBackDingo: pong Jan 14 21:40:41 if i wanna transparent proxy all traffic over ssh, i can and have used darkk/redsocks. what of incoming connections.. a hack into uclibc's listen() ?worth it? hmm... Jan 14 22:17:47 hey jow, you've had a chance to work on stuff other than libtool....bet you're saying about time ! Jan 14 22:18:14 yeah Jan 14 22:18:29 want to get luci finished Jan 14 22:19:02 libtool part2 is yet to be done though Jan 14 22:19:16 part2?! What's that? Jan 14 22:19:21 backfire fallout Jan 14 22:19:38 ah, right Jan 15 00:18:02 * swalker goes to locally re-add the vnstat download bits Jan 15 00:19:26 hm, you used it? Jan 15 00:23:24 aye Jan 15 00:24:41 and how do you upload the backups? with a cronjob? Jan 15 00:26:08 right Jan 15 00:26:59 give me a minute Jan 15 00:31:55 there isn't a service_reload function to SIGHUP? Jan 15 00:32:51 http://paste.openwrt.org/d3f95d2e4 Jan 15 00:33:27 http://paste.openwrt.org/d245f4419 Jan 15 00:40:04 swalker: one point I did not understand, why is www-dir required? Jan 15 00:45:39 the crontab is on the other end and downloads the backup from /www/vnstat Jan 15 00:49:01 hm Jan 15 00:50:11 that download worksforme, minus the trailing slash on the example url Jan 15 00:51:27 it will probably fail if no backup is on the remote side Jan 15 00:51:36 at least when not limiting tries Jan 15 00:54:08 with that short of a sleep the non-ups connected server won't be booted back up either after a power outage Jan 15 00:57:13 http://paste.openwrt.org/d6e9b74b8 Jan 15 00:57:40 this one: http://paste.openwrt.org/d27f2702b Jan 15 00:58:15 I only worry about it blocking init forever Jan 15 01:01:18 right Jan 15 01:11:27 I think that one is golden: http://paste.openwrt.org/d7dfee469 Jan 15 01:14:25 and while we're at it? Wouldn't it be better to make the hostname part a directory? Jan 15 01:14:34 s/it?/it, / Jan 15 01:22:24 jow_laptop: If you take a look at this post, it is nothing but a spam (link on the signature). There is a lot of this kind of spam posts that inundated the OpenWRT forum. Jan 15 01:24:39 xMff: I think either way is a organizational preference Jan 15 01:25:30 mazilo: won't be the last Jan 15 01:27:04 swalker: Understood. But, someone ought to remove the spam posts and disable the spammer account. If need be, block his subnet. Jan 15 01:29:35 mazilo: which post? Jan 15 01:29:47 I usually just delete the accounts along with all associated posts Jan 15 01:33:34 mazilo: I fail to see any recent spam Jan 15 01:35:55 xMff: The link I provided contains an HTTP link on its signature. AFAIC, this is how spammers spread their spam. Jan 15 01:36:25 you didn't provide a link Jan 15 01:38:25 xMff: Sorry about that. Here is the link https://forum.openwrt.org/viewtopic.php?pid=125485#p125485 Jan 15 01:39:23 xMff: 1st post like that with links in the signature is a positive sign of a spam. Jan 15 02:05:28 jow * r25001 /packages/net/vnstat/ (Makefile files/vnstat-uci.conf files/vnstat.init): [packages] vnstat: readd download and symlink functionality Jan 15 02:45:42 xMff: Is it possible to update the OpenWRT Makefile for net/freeswitch with v1.0.7 which was released today (http://freeswitch-users.2379917.n2.nabble.com/FreeSWITCH-1-0-7-tp5922408p5922408.html)? **** ENDING LOGGING AT Sat Jan 15 03:00:01 2011