**** BEGIN LOGGING AT Mon May 23 02:59:58 2011 May 23 07:54:04 build #41 of at91 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/41 May 23 08:33:17 build #40 of ubicom32 is complete: Failure [failed compile_3] Build details are at http://buildbot.openwrt.org:8010/builders/ubicom32/builds/40 May 23 09:03:33 hi, can some1 look on my issue ? building firmware is failing when I choose some particular eglibc versions , seems like error in some definitions, wrong version is taken - http://pastebin.com/aVSvC8Ba May 23 10:41:10 * russell-- finds the /etc/config/dhcp configuration for pxe booting confusing ... how to specify that only certain macaddrs should get pxebooting stuff (converting from dhcpd3) ... uci docs suggest it's possible but i don't see an example to show how May 23 10:44:41 russell - you can specify class for those addresses (or clients type) May 23 10:46:03 at least thats possible in dhcpd3 May 23 10:46:54 voyo, what does that look like for dnsmasq? May 23 10:47:23 voyo: is this a clean build or is this an earlier trunk build updated to a newer svn revision? if the latter, try rebuilding your toolchain May 23 10:51:05 russell Im not dnsmasq specialist, but there are options like: dhcp-host=mac , or ie. dhcp-match=gpxe,175 May 23 10:52:39 KanjiMonster: its not clean-clean, but I did "make clean" and "make dirclean", still getting this error. now seems its compiling for long time with eglibc-2.9 ,so far ok. but Im not happy. May 23 11:10:23 russell--: you can still use dnsmasq.conf May 23 12:01:06 jow_laptop: whats best to deal with this? - May 23 12:01:06 checking how to print unsigned long long... configure: error: can not run test program while cross compiling May 23 12:17:32 voyo: find out whats the corresponding cache variable and predefine it May 23 12:22:07 jow_laptop: ok, is there any package I can use as example ? May 23 12:57:12 jow:see my pm pls. May 23 13:11:21 voyo: no, you have to infer the correct variables from the config.log May 23 13:11:57 jow_laptop: seems in configure.in are no references to AC_CACHE_CHECK , I think only option is to remove this test... May 23 13:12:48 would not be unusual May 23 13:13:24 gzanan: I could not find any submissions May 23 13:18:11 Just add radvd translation to submission #451 and a few typo fix for former pos May 23 13:18:13 gzanan: you wrote something about #4xx but we do not have that many tickets in luci May 23 13:19:07 No 451? May 23 13:19:39 "Ticket 451 does not exist." May 23 13:20:07 ok,I upload again May 23 13:20:16 wait, I found it May 23 13:20:21 you meant submission nr. 451 May 23 13:20:30 which is ticket 238 May 23 13:20:39 yes May 23 13:23:19 committed May 23 13:59:09 How soon will trunk merge GCC-4.6? May 23 14:43:38 I need an suggestion pls.. Im have an issue with 'ethtool' and snmpd (maybe with something else yet, but those are things I'v found. for both Im getting 'segmentation fault' , thats strace output http://pastebin.com/c6vJKhga . I already changed glibc versions , options in kernel , and few other things (also replaced ethtool with latest avilable version). Im not sure what else I can do with this yet... May 23 15:18:23 gdb ? May 23 17:51:22 hi May 23 18:20:37 jow_laptop: hehe. i found dnsmasq.conf only slightly less confusing ;-) May 23 18:31:24 Hello, May 23 18:31:48 I have a problem using the framework: I'm trying to change a bit the "pcre" package May 23 18:32:24 and no matter what target I try I can't rebuild only it May 23 18:32:35 I expected that something like: May 23 18:32:51 make package/pcre-compile would work May 23 18:33:08 or maybe make package/libpcre-compile V=99 May 23 18:33:30 but no matter what I tried, the answer is *always* : May 23 18:33:31 make[1]: Entering directory `/home/jaube/src/WRT/openwrt' May 23 18:33:31 make[1]: *** No rule to make target `packages/libpcrecpp-clean'. Stop. May 23 18:33:31 make[1]: Leaving directory `/home/jaube/src/WRT/openwrt' May 23 18:33:31 make: *** [packages/libpcrecpp-clean] Erreur 2 May 23 18:34:55 I tried everything : With "s" , without "s", with package/libs/pcre , package/libs/libpcre , package/libpcre, package/pcre , .... May 23 18:35:14 I think I just don't get the logic May 23 19:02:09 Found .... finally : make package/pcre/compile May 23 19:37:27 obinou: but you will still need to do a 'make' from top level to erbuild the package directory and list (as me how I know :-) May 23 20:02:07 ////////////////............................................................... May 23 20:30:03 gerritv, yes >I found that the hard way, too May 23 20:30:05 thx May 23 21:09:48 cshore * r26973 /packages/admin/muninlite/patches/ (3 files): May 23 21:09:48 [naalstones] muninlite: Fixes: Error messages on server due to missing ethtool May 23 21:09:48 on node, recognition of tapX devices, recognition of openwrt bridges, and May 23 21:09:48 workaround for dashes in interface names (replace with an underscore on graph) May 23 21:09:50 cshore * r26974 /packages/admin/muninlite/patches/210-add-bridge-devs.patch: [packages] admin: muninlite: Corrected patch for bridge / dash in interface name patch. It had extraneous +'s from copying from a patch May 23 21:14:27 Hauke, ive tested the patch i created. tested on netgear wnr834bv2, simpletech simpleshare, and linksys wrt54g. I have dmesg logs if you like. May 23 21:19:01 brb May 23 22:50:12 luka * r26975 /packages/net/git/ (4 files in 2 dirs): upgrade git package May 23 23:14:42 luka * r26976 /packages/net/git/patches/ (100-fix-cross_compile.patch 110-convert_builtin.patch): git package; cleaning up my mess **** ENDING LOGGING AT Tue May 24 01:08:22 2011 **** BEGIN LOGGING AT Tue May 24 05:32:15 2011 May 24 05:54:06 build #41 of s3c24xx is complete: Failure [failed compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/41 May 24 08:14:31 jow * r26977 /trunk/ (3 files in 3 dirs): [netfilter] package u32 match and TEE target, patches by Maxim Uvarov May 24 08:40:39 jow * r26978 /packages/libs/pcre/Makefile: [packages] libpcre: enable unicode property support (required by php) (#9360) May 24 08:47:24 jow * r26979 /packages/ (4 files in 3 dirs): [packages] restund, baresip, libre: update to v0.2.0 May 24 08:55:02 philipp64|laptop: why does the cs5535 patch remove kmod-ata-via-sata from the alix2 profile? May 24 08:55:16 and why did you prefix it with geos, it seems to touch all targets May 24 08:55:17 ? May 24 09:01:20 jow * r26980 /packages/net/udpcast/ (. Makefile): [packages] add udpcast - a file transfer tool that can send data simultaneously to many destinations on a LAN, patch by Lauri Võsandi May 24 09:03:45 jow * r26981 /packages/Xorg/xorg/app/xprop/ (. Makefile): [packages] add xprop - an application used for settings X properties, patch by Lauri Võsandi May 24 09:10:01 jow * r26982 /packages/net/tinyproxy/ (4 files in 2 dirs): (log message trimmed) May 24 09:10:01 [PATCH] tinyproxy: allow to use the bind option May 24 09:10:01 Attached patch allows to use the 'bind' option even if transparent proxy May 24 09:10:01 support is compiled into tinyproxy (which is in openwrt). There are May 24 09:10:01 several references related to the bug, but nobody seams to know why this May 24 09:10:01 - apparently not needed - check was build in. May 24 09:10:02 Regards May 24 09:12:53 jow * r26983 /trunk/package/dnsmasq/ (Makefile files/dnsmasq.init): (log message trimmed) May 24 09:12:54 [PATCH] dnsmasq: allow hostname assignment without static lease May 24 09:12:54 The attached patch for dnsmasq.init allows to assign a hostname to a May 24 09:12:54 particular mac-address. It's useful to override the client supplied May 24 09:12:54 hostname, especially if the client does not supply a hostname at all. May 24 09:12:54 It corresponds to the following example in dnsmasq.conf.example: May 24 09:12:55 # Always set the name of the host with hardware address May 24 09:14:38 jow * r26984 /trunk/package/kernel/modules/crypto.mk: May 24 09:14:38 [PATCH] kernel: kmod-crypto-iv depends on kmod-crypto-manager May 24 09:14:38 Add a missing dependency to kmod-crypto-iv. chainiv.ko and eseqiv.ko May 24 09:14:38 from kmod-crypto-iv depend on crypto_blkcipher.ko from May 24 09:14:38 kmod-crypto-manager. May 24 09:14:39 Signed-off-by: Lars Hjersted May 24 09:17:34 nbd * r26985 /branches/backfire/target/linux/ar71xx/files/drivers/net/ag71xx/ (5 files): ar71xx: merge latest ag71xx changes from trunk, fix wrong argument to phy_mii_ioctl() May 24 09:27:26 jow * r26986 /trunk/package/base-files/Makefile: [package] base-files: mark /etc/crontabs/ as config directory May 24 09:28:30 jow * r26987 /branches/backfire/package/base-files/Makefile: [backfire] merge r26986 May 24 09:30:27 jow * r26988 /trunk/scripts/feeds: May 24 09:30:27 [PATCH] Add support for git-svn package feeds May 24 09:30:27 Signed-off-by: Jonathan McCrohan May 24 09:30:58 jow * r26989 /branches/backfire/scripts/feeds: [backfire] merge r26988 May 24 09:31:40 nbd * r26990 /trunk/package/base-files/files/lib/network/config.sh: base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration May 24 09:32:27 nbd * r26991 /branches/backfire/package/base-files/files/lib/network/config.sh: base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration (backport of r26990) May 24 09:33:31 nbd: r26991 will blow up on brcm-2.4 May 24 09:33:32 ethernet throughput painfully slow on an alix2 May 24 09:33:50 100kbps May 24 09:33:54 wos? May 24 09:33:56 qos? May 24 09:34:06 jow_laptop: how so? May 24 09:34:08 * russell-- looks May 24 09:34:09 oh May 24 09:34:11 right May 24 09:34:20 nbd: no sysfs, empty arg, syntax error, no ifconfig up May 24 09:35:27 jow_laptop nails it May 24 09:35:40 /etc/init.d/qos stop fixed it :-) May 24 09:37:35 nbd * r26992 /branches/backfire/package/base-files/files/lib/network/config.sh: base-files: fix brcm-2.4 issues in r26991 May 24 09:37:54 jow * r26993 /packages/net/yaddns/Makefile: (log message trimmed) May 24 09:37:54 [PATCH] yaddns: update to 1.1-rc2 May 24 09:37:54 Hi, May 24 09:37:54 The patch attached to the mail updates yaddns to 1.1-rc2. Changes are: May 24 09:37:54 * autotools refactoring May 24 09:37:55 * fix blocked state in request if connect() or recv() failed. May 24 09:37:56 Add timeout feature which abort pending request (connect(), send(), recv()) May 24 09:46:50 jow * r26994 /packages/net/iputils/ (5 files in 2 dirs): May 24 09:46:50 [PATCH] Update iputils to 20101006 May 24 09:46:50 This patch also fixes the ping6 linking issues with uClibc by disabling May 24 09:46:50 the libresolv-based stuff (the "-N nodeinfo-option" feature). May 24 09:46:50 Signed-off-by: Luis Alberto Dallos Roa May 24 09:51:11 jow * r26995 /trunk/package/libpcap/ (8 files in 2 dirs): May 24 09:51:11 [PATCH] Update libpcap to version 1.1.1 May 24 09:51:11 Signed-off-by: Christoph König May 24 09:53:56 jow * r26996 /trunk/package/libpcap/patches/ (2 files): [package] libpcap: remove empty patchfiles May 24 10:00:38 hcg * r26997 /trunk/target/linux/generic/patches-2.6.36/822-usb_serial_option_add_more_devices.patch: [generic] Clean up patch not applying May 24 10:01:27 jow * r26998 /packages/net/dhcp/ (Makefile files/dhcpd.init): (log message trimmed) May 24 10:01:28 [PATCH] add interface and hosts parsing from uci dhcp config to ISC dhcpd (fix bridges) May 24 10:01:28 This allows people to use the luci interface to specify to dhcpd which May 24 10:01:28 interfaces it should listen to, and which static MAC->IP host mappings May 24 10:01:28 should it define May 24 10:01:28 For the interface, this has to be done in the initscript, via May 24 10:01:28 commandline when the server is started May 24 10:23:02 <_trine> http://dpaste.com/545879/ May 24 10:23:14 <_trine> libpcap seems not to compile May 24 10:36:28 jow * r26999 /trunk/package/libpcap/ (4 files in 2 dirs): [package] libpcap: add -fpic, refresh patches May 24 10:40:53 jow_laptop: that one's wrong May 24 10:40:57 i'll commit a better fix May 24 10:42:52 nbd * r27000 /trunk/package/libpcap/ (4 files in 2 dirs): libpcap: properly fix fPIC handling (reverts $(FPIC) added in r26999) May 24 10:50:15 ah, thanks May 24 11:02:37 <_trine> libpcap compiles now May 24 11:03:25 ping cshore May 24 12:57:37 ping nbd May 24 13:35:24 Is there any progress on K2.6.39 for ar71xx? May 24 13:39:36 gzanan: see https://dev.openwrt.org/log/trunk/target/linux/ar71xx May 24 15:23:35 <^Willie^> hmm anyone here that have his profilic pl2303 usb 232 cable working ? May 24 15:23:49 yes May 24 15:23:50 <^Willie^> mine seem to be broken or i'm missing somthing.. May 24 15:23:56 <^Willie^> all i gues is garbage out of it.. May 24 15:24:04 <^Willie^> gues/get* May 24 15:24:05 wrong baudrate? May 24 15:24:12 <^Willie^> nope even local echo fails :S May 24 15:25:09 <^Willie^> loswillios: wat kind of cable do you have there btw ? i have one of those siemens c55 data cables here May 24 15:26:49 some siemens thing. bought it years ago May 24 15:27:29 <^Willie^> posible that i failed by removing the loop wire from dcd to gnd ? May 24 15:27:34 <^Willie^> http://i1st.ru/wp-content/uploads/2009/09/pl2303_pinout4.jpg May 24 15:28:18 <^Willie^> also i know for shure i have a 1.8 ~ 3.3V model hard configured working on 3.3v.. remote/local source switch is on the board but not working.. May 24 15:29:13 <^Willie^> loswillios: hmm and direct link rx and tx on your cable results in local echo wat you type in minicom or screen ? May 24 15:29:32 <^Willie^> since mine did do that.. but somehow not anymore since yesterday May 24 15:30:15 I guess it should, never tried it though. May 24 15:30:49 <^Willie^> hmm but if even that fails it must be my cable when this happend on windows and linux desktops .. May 24 15:31:37 <^Willie^> also have some warnings about they can be inverted if they are a phone cable.. not shure but then the loop link must still work. May 24 15:32:27 <^Willie^> guess it is time for one of those ftdi cables but nore shure wich of those conrad cable will do as uart and jtag dongle.. May 24 15:47:10 nbd: ping May 24 15:48:11 <^Willie^> loswillios: hmm any tips or hints.. atm i still wonder wat is going wrong.. May 24 15:48:50 nope, sorry. don't know anything about ftdi cables either May 24 15:49:25 maybe blogic has a recommendation May 24 15:50:35 <^Willie^> hmm the router i have here on my desk is not using jtag but i2c and uart.. basicly i have 2 or 3 pins that spitout data during bootup but i do not really trust on my pl2303 cable right now since the loop test already fails. May 24 15:51:02 <^Willie^> its a bit frustrating ;) May 24 15:53:21 mirko * r27001 /trunk/toolchain/uClibc/patches-0.9.32/350-use-fputs_unlocked.patch: May 24 15:53:21 [toolchain/uclibc] use 'fputws_unlocked(S,F)' instead of 'fputws(S,F)' May 24 15:53:21 this eliminates a source of reproduceable freezes May 24 15:53:21 http://lists.uclibc.org/pipermail/uclibc/2011-May/045367.html May 24 15:53:52 mirko * r27002 /branches/backfire/toolchain/uClibc/ (4 files in 4 dirs): May 24 15:53:52 [backport] [toolchain/uclibc] use 'fputws_unlocked(S,F)' instead of 'fputws(S,F)' May 24 15:53:52 this eliminates a source of reproduceable freezes May 24 15:53:52 http://lists.uclibc.org/pipermail/uclibc/2011-May/045367.html May 24 15:59:32 anyone want to commit my mtd fix please? May 24 16:00:09 it's http://patchwork.midlink.org/patch/1019/ and two people have said it looks good. May 24 16:03:55 loswillios * r27003 /packages/utils/cryptsetup/Makefile: [packages] cryptsetup: update to 1.3.1 May 24 16:09:58 ping nbd May 24 16:12:17 nbd hello, is there somewhere a script to create the compat-wireless package for openwrt? May 24 16:12:38 i need to update it as it doesnt compile with 2.6.39 May 24 16:15:16 tripolar: i have some local scripts that update it from wireless-testing. May 24 16:15:25 tripolar: which part is not working? May 24 16:16:06 when i compile it i get May 24 16:16:32 wait a second the screen with the error is allready closed i start the compile again May 24 16:17:19 nbd: are the tarballs from here? http://linuxwireless.org/download/compat-wireless-2.6/ May 24 16:17:28 no, i make the tarballs myself May 24 16:17:55 i use compat.git, compat-wireless.git and wireless-testing.git + adjustments to make the compat-wireless patches work with wireless-testing May 24 16:19:27 /mnt/stuff/Openwrt/trunk_git/build_dir/linux-brcm47xx/compat-wireless-2011-05-13/drivers/net/wireless/b43/main.c: In function 'b43_imcfglo_timeouts_workaround': May 24 16:19:30 /mnt/stuff/Openwrt/trunk_git/build_dir/linux-brcm47xx/compat-wireless-2011-05-13/drivers/net/wireless/b43/main.c:4231:3: error: implicit declaration of function 'ssb_commit_settings' May 24 16:19:34 mbd thats the error i get May 24 16:19:35 ah May 24 16:19:43 that one doesn't require a change to compat-wireless May 24 16:19:58 how can it be fixed? May 24 16:20:02 it requires a ssb backport that i added to other architectures which i thought was present in 2.6.39, but isn't May 24 16:20:54 forward port target/linux/generic/patches-2.6.38/021-ssb_commit_settings_export.patch May 24 16:21:03 then it should work May 24 16:22:37 okay i recompile the kernel May 24 16:23:00 and it seems that exportfs=m doesnt work for 2.6.39 anymore May 24 16:23:16 i get a warning when i compile the kernel that =m is not possible May 24 16:23:48 .config:660:warning: symbol value 'm' invalid for EXPORTFS May 24 16:27:35 yeah, that was added upstream. i think we should revert that May 24 16:30:25 nbd do you have a local linux git clone? i dont and i dont want to download it now May 24 16:31:03 swalker * r27004 /packages/net/udpcast/Makefile: [packages] udpcast: fix section mismatch May 24 16:31:36 what for? May 24 16:31:51 to find out what they changed the just revert the one commit May 24 16:32:05 the just/to just May 24 16:32:12 we shouldn't revert the entire commit May 24 16:32:18 just turn the bool symbol back into a tristate May 24 16:36:17 okay ill test it May 24 16:36:28 hope the kernel comes up at all :) May 24 16:52:42 <_trine> is there any reason my nanostation is still using 2.6.37.6 May 24 16:54:35 yes, there is a profound reason for that May 24 16:54:40 it all starts with the creation of the universe ... May 24 16:54:56 erm May 24 16:54:59 no, that's probably not what you meant May 24 16:54:59 ;) May 24 16:55:01 "still" May 24 16:55:33 <_trine> yes the answer is probably 42 May 24 16:55:45 there will be no 2.6.42 May 24 16:55:47 bad, ancient kernel. almost fivem onths old May 24 16:56:44 <_trine> I was referring to the answer of all the questions in the universe which I found from Hitch Hikers Guide May 24 16:56:51 <_trine> :P May 24 16:57:47 * _trine smiles in a vacant kind of way May 24 17:01:10 <_trine> In the beginning the Universe was created. This has made a lot of people very angry and has been widely regarded as a bad move. May 24 17:02:20 nbd it works :) May 24 17:02:26 im on 2.6.39 now May 24 17:02:28 cool May 24 17:02:38 i will send the patch to the ml May 24 17:02:59 i also added the tristate patch May 24 17:07:01 nbd the patch should be on the ml May 24 17:07:15 i have to go now - thanks for your help - have a nice day May 24 17:08:17 tripolar: can you split out the generic changes? then I'll submit a (more complete) patch for generic for 2.6.39 ;) May 24 17:08:39 KanjiMonster: yes - wait a few minutes ill do it now May 24 17:14:17 KanjiMonster: did it - it should be on the ml in a few seconds May 24 17:23:04 nbd: mh, looking at the commit making exportfs bool, if we want it built as a module, it probably should depend on FHANDLE || !FHANDLE (since FHANDLE is bool and selects EXPORTFS) May 24 17:24:01 shouldn't a bool selecting a tristate force the tristate to =y? May 24 17:26:17 nbd: hm, that might be, haven't tested that. I'll check May 24 17:30:29 nbd: you're right. then I really don't see the reason why it went bool May 24 17:32:04 kk May 24 17:39:56 nbd: looks like it was added for a #ifdef CONFIG_EXPORTFS in earlier versions of a patch which got later removed, but the tristate => bool wasn't reverted in the later versions of the patch May 24 17:40:17 ok May 24 20:36:45 Hello, i'm editing the wiki page for supported devices. I want to add the device described in this ticket -> https://dev.openwrt.org/ticket/6920. My question is: What do i have to write into the status cell? - trunk? May 24 20:43:32 Syburg: if it is supported by trunk then yes May 24 20:44:18 blogic: thats the problem, the device is planned to be supported but it isn't yet. May 24 20:44:51 then use WIP (Work In Progress) May 24 20:47:55 blogic: Great! Thank you. I didn't know what the abbreviation means. May 24 20:58:58 ;) May 24 21:05:29 Good night everyone! May 25 02:16:14 build #27 of etrax is complete: Failure [failed compile_3] Build details are at http://buildbot.openwrt.org:8010/builders/etrax/builds/27 May 25 02:55:39 build #37 of orion is complete: Failure [failed compile_7] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/37 **** ENDING LOGGING AT Wed May 25 02:59:57 2011