**** BEGIN LOGGING AT Thu May 26 02:59:57 2011
May 26 05:47:13 <russell--> KanjiMonster: have you done any work on RB/493G?
May 26 07:49:09 <builder_> build #37 of pxcab is complete: Failure [failed compile_3]  Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/37
May 26 09:35:35 <KanjiMonster> russell--: nope
May 26 10:22:34 <russell--> KanjiMonster: /me recalls seeing your name in association with the switch chip used on them
May 26 10:22:53 * russell-- just ordered 5 of them ;-)
May 26 10:22:58 <KanjiMonster> ah, I see
May 26 10:23:45 <russell--> https://forum.openwrt.org/viewtopic.php?pid=104521#p104521
May 26 10:23:48 <KanjiMonster> well, the rb493 has two ar8316 switches, a configuration which is currently not supported
May 26 10:24:01 <russell--> yeah
May 26 10:24:35 <russell--> where should i look?
May 26 10:25:25 <KanjiMonster> first find out how the switch chips are attached (e.g. is one to eth0 and one to eth1? at what phy addresses?)
May 26 10:26:00 <KanjiMonster> then it's probably a way of making the driver register for a different phy address than 0
May 26 10:26:18 <russell--> okay ... they don't arrive until next tuesday
May 26 10:28:50 <soma> has anyone build and booted backfire in the last few days? i get "Attemt to kill init at boot"
May 26 10:29:08 <soma> on ar71xx and probably brcm47xx too, have to check that
May 26 10:31:21 <jow_laptop> can you try to revert https://dev.openwrt.org/changeset/27002 ?
May 26 10:32:14 <soma> ok, i'll do that. gonna start with a new checkout just to be sure it is not my foo that breaks it ;)
May 26 10:32:29 <jow_laptop> well you're the 2nd asking
May 26 10:35:08 <soma> yes, i also remember asking that someone else a few days ago
May 26 10:35:39 <jow_laptop> though I cannot really imagine what would cause that
May 26 10:35:48 <jow_laptop> for more than one arch
May 26 10:36:10 <jow_laptop> when was the last successful build?
May 26 10:36:45 <soma> the backfire snapshots from 19.5. work. i think mine was 20. or so.
May 26 10:37:22 <soma> hm, no, rather 23.
May 26 10:39:08 <jow_laptop> well the uclibc change is the only one that looks relevant
May 26 10:39:14 <jow_laptop> in the given timeframe
May 26 11:08:53 <soma> ok, happens with fresh checkout too. now reverting that patch
May 26 11:25:58 <jow_laptop> anotherp ossibility is that preinit crashes
May 26 11:46:46 <soma> jow_laptop: make toolchain/clean and then make should be enough, nor?
May 26 11:47:08 <soma> (after going back with the uclibc dir to 27000)
May 26 12:09:34 <CIA-89> florian * r27012 /trunk/target/linux/brcm63xx/patches-2.6.37/ (20 files): [brcm63xx] renumber board patches
May 26 12:09:43 <nbd> jow_laptop, soma: always use make dirclean if you want to make sure that the toolchain is properly killed
May 26 12:10:05 <nbd> i've noticed that sometimes rebuilding only uclibc generates binaries that don't work properly
May 26 12:10:53 <nbd> it seems to be related to whether uclibc was built by the initial gcc vs the final gcc
May 26 12:11:18 <soma> ok, trying that now
May 26 13:22:35 <soma> strange. i'm back to 26888 now and still: Kernel panic - not syncing: Attempted to kill init!
May 26 13:53:16 <CIA-89> florian * r27013 /trunk/target/linux/brcm63xx/patches-2.6.37/ (44 files): [brcm63xx] renumber patches accordingly
May 26 13:53:20 <CIA-89> florian * r27014 /trunk/target/linux/brcm63xx/patches-2.6.37/ (7 files): [brcm63xx] fold 446-board-D4PW_correction.patch in 440-board-D4PW.patch
May 26 14:17:37 <Epsylon3> could somebody update this : ./usr/lib/lua/luci/view/sysauth.htm
May 26 14:17:41 <Epsylon3> <script type="text/javascript">
May 26 14:17:41 <Epsylon3> document.forms[0].password.focus();
May 26 14:17:41 <Epsylon3> </script>
May 26 14:18:23 <Epsylon3> or keep a real cookie
May 26 14:21:56 <Epsylon3> (memory cookie is enough)
May 26 14:41:32 <FinboySlick> Assuming that I want a buildroot that matches rc4, do I just svn the same release and then use the .config provided for plain 10.03?  If not, where to find the .config used to generate the .rc4 release?
May 26 14:42:34 <jow_laptop> Epsylon3: ?
May 26 14:43:08 <Epsylon3> yea... else we always need to mouse to login into luci
May 26 14:43:18 <Epsylon3> "need the mouse"
May 26 14:44:08 <jow_laptop> k
May 26 14:45:56 <Epsylon3> or focus to username
May 26 14:46:03 <Epsylon3> a tab will works then
May 26 14:48:21 <Epsylon3> not related : just bipassed motorola defy signature check last night ^^ we can now make cyanogen ROMs directly flashable
May 26 14:53:21 <nbd> cool
May 26 15:16:17 <Epsylon3> in fact we can include the second Certificate in partition images, normaly made against the only one present at end in official images
May 26 15:17:04 <Epsylon3> and its faster, because the phone skip the certificate check (on whole partition content)
May 26 18:43:53 <JugglerLKR> hi
May 26 18:44:04 <JugglerLKR> i need some guidence
May 26 18:44:24 <JugglerLKR> i'm resoldering 4mb chip for 8mb chip on ar71xx router
May 26 18:44:45 <JugglerLKR> what do i have to patch to utilize extra 4mb of flash? uboot? openwrt?
May 26 19:09:34 <CIA-89> jow * r27015 /branches/backfire/include/target.mk: [backfire] re-add udevtrigger and hotplug2 to default packageset, partly reverts logic fail in r26972
May 26 19:32:45 <FinboySlick> I'm having trouble getting this (very basic) makefile working.  With the package selected in menuconfig, it just says: Nothing to be done for `compile'.
May 26 19:32:57 <FinboySlick> Here's the makefile:  http://pastebin.com/pQJrfdiQ
May 26 19:33:27 <xMff> its missing an install section
May 26 19:33:40 <xMff> without that, nothing will happen
May 26 19:33:53 <FinboySlick> xMff: Thanks.
May 26 19:34:24 <xMff> so start with at least:
May 26 19:34:24 <xMff> define Package/heartbeat/install
May 26 19:34:24 <xMff>         true
May 26 19:34:24 <xMff> endef
May 26 19:34:44 <xMff> (the space before true must be a tab)
May 26 19:35:13 <FinboySlick> xMff: I was going to do something along those lines, yeah.
May 26 19:37:35 <russell--> recently libpcap was upgraded, but that didn't trigger rebuilds for things that depended on libpcap (e.g. iftop, tcpdump, etc) ... how come?
May 26 19:44:31 <FinboySlick> xMff: Damn, they really messed up the file names on that one :P
May 26 19:45:18 <FinboySlick> url has a lowercase h, untarred dir has a capital H, etc.
May 26 22:02:59 <builder_> build #37 of lantiq is complete: Failure [failed compile_6]  Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/37
May 26 22:12:01 <RealOpty> xMff, do you think my backfire build wouldnt work because it was missing udevtrigger?
May 26 22:32:53 <Epsylon3> if i could have your opinon on my lastest build : http://tanguy.tk/wnr854t/openwrt_r27011/
May 26 22:33:20 <Epsylon3> is there a config file for manually "added" feeds ?
May 26 22:33:38 <Epsylon3> (to publish all config files in my release)
May 27 00:14:34 <soma> RealOpty: quite possible. between 26972 and 27015 udevtrigger and hotplug2 was missing
May 27 01:02:59 <CIA-89> swalker * r27016 /packages/net/lft/ (3 files in 2 dirs):
May 27 01:02:59 <CIA-89> [packages] lft: update to 3.32
May 27 01:02:59 <CIA-89> * add whob package
May 27 01:02:59 <CIA-89> * disable install target strip'ping
May 27 01:02:59 <CIA-89> * remove obsolete pcap cflags patch
May 27 01:03:00 <CIA-89> * use PKG_INSTALL & CONFIGURE_ARGS
May 27 02:53:06 <CIA-89> tripolar * r27017 /packages/net/ntpd/Makefile: [packages] ntpd: update to version 4.2.6_p3
**** ENDING LOGGING AT Fri May 27 02:59:58 2011