**** BEGIN LOGGING AT Wed Mar 14 02:59:58 2012 Mar 14 04:52:43 build #120 of ar71xx is complete: Failure [failed shell] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/120 Mar 14 05:36:36 build #148 of s3c24xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/148 Mar 14 06:33:57 build #147 of at91 is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/147 Mar 14 06:36:41 build #145 of ubicom32 is complete: Failure [failed compile_1] Build details are at http://buildbot.openwrt.org:8010/builders/ubicom32/builds/145 Mar 14 09:52:44 http://paste.pocoo.org/show/565388/ Mar 14 11:30:20 jogo * r30940 /trunk/target/linux/lantiq/modules.mk: Mar 14 11:30:20 lantiq: load dwc_otg early Mar 14 11:30:20 Needed for using external rootfs on usb sticks. Mar 14 11:30:20 Signed-off-by: Jonas Gorski Mar 14 15:33:28 build #113 of iop32x is complete: Failure [failed compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/113 Mar 14 16:18:43 build #136 of pxcab is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/136 Mar 14 16:36:35 why the wifi interface is off by default? Mar 14 16:37:29 it makes difficult to access the router when probing new boards and the ethernet port doesn't work Mar 14 16:48:33 <[florian]> because open wifi is a security issue otherwise Mar 14 17:12:19 danitool: you are free to put a wireless config file into files/etc/config in your buildroot Mar 14 17:12:44 yes, that was what I did Mar 14 17:23:11 build #131 of ppc40x is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/131 Mar 14 18:45:55 should this work actually? "-- Check for working C compiler: /home/openwrt/alix.3d3/staging_dir/toolchain-i386_gcc-4.6-linaro_uClibc-0.9.33/bin/i486-openwrt-linux-uclibc-gcc -- broken" to "crosscompile" an application for x86 (alix.3d3) Mar 14 19:06:07 nbd: jow_laptop did you guys checked the dnsmasq 2.60 changelog? nice RA additions Mar 14 19:08:29 yes, seen it Mar 14 19:08:46 but its a bigger update, so it needs through testing Mar 14 19:08:51 thorough Mar 14 19:09:58 ofc, im gonna play with it in this weekend, maybe can replace radvd Mar 14 19:12:35 jow * r30941 /packages/net/vsftpd/ (3 files in 2 dirs): [packages] vsftpd: fix compilation if libcap has been built in the same tree (#10937) Mar 14 19:12:53 no, I don't think it can replace radvd Mar 14 19:13:15 it just implements enough RA capabilities to tell the client to approach the DHCPv6 server Mar 14 19:13:23 at least it sounded that way in the changlog Mar 14 19:13:29 haven't looked at the code yet Mar 14 19:46:54 what should be correct path to toolchain? Mar 14 19:48:16 the one you pasted above Mar 14 19:48:44 hmm and what could be wrong that it actually fails on check? Mar 14 19:48:54 and the gcc was probably detected as "broken" because it refuses to work if the STAGING_DIR env var is not set Mar 14 19:49:39 export STAGING_DIR=home/openwrt/alix.3d3/staging_dir/target-i386_uClibc-0.9.33/ Mar 14 19:49:41 maybe we should just add a patch to gcc that allows missing variables in the spec file Mar 14 19:49:52 i.e. simply turn that error into a warning Mar 14 19:49:59 yes, that would make sense Mar 14 19:51:12 jow_laptop seems you have right about staging_dir env var.. http://dpaste.com/716566/ Mar 14 19:52:59 nbd: I'll look into it Mar 14 19:54:52 -- Check for working C compiler: /home/openwrt/alix.3d3/staging_dir/toolchain-i386_gcc-4.6-linaro_uClibc-0.9.33/bin/i486-openwrt-linux-uclibc-gcc -- works Mar 14 19:54:55 jow_laptop thanks. Mar 14 19:57:54 nbd: if i may, i still cant figure out why this BIG difference in wireless throughput on my wr740n v2.4 , with oem firmware im at 40/30 Mbit/sec, with tonights trunk im at 20/20 .. i tries HT40 - and + with noscan 1 at jow's recommendations, i tried several channels still ... Mar 14 19:59:13 dape_x60t: tried setting the rx/tx antenna to 1? Mar 14 19:59:31 nbd: this is my current config http://paste.pocoo.org/show/565690/ if its needed i can check oem firmware config and stuff, i got serial access Mar 14 19:59:35 the wr740n is like the 741n, with an ar9285 wireless chipset, right? Mar 14 19:59:36 nbd: no, Mar 14 19:59:58 nbd: ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xb0000000, irq=40 Mar 14 20:00:24 some of those tp-link devices (especially the wr741nd) have crappy diversity Mar 14 20:00:37 not sure what setting is that Mar 14 20:01:04 option txantenna 1, option rxantenna 1 Mar 14 20:01:18 thanks, let me try right now Mar 14 20:03:45 meh 22/39 a little better Mar 14 20:26:24 uhm, i wonder if this wr740n can really deal with txpower 27 Mar 14 20:27:00 no, most likely not Mar 14 20:27:19 im at 21 now in /etc/config/wireless tho luci says 17 dbm in the interface and allows me max 20 Mar 14 20:27:21 you can grab the fcc id and look up the test reports at fcc.gov to get real txpower limits Mar 14 20:27:28 oki Mar 14 20:48:42 build #145 of brcm47xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/145 Mar 14 20:55:20 default firmware's iwconfig ath0 says tx power 9dbm and i got 36/37 at speedtest.net Mar 14 20:56:47 has hostapd 0.9.5 driver=madwifi and mode=g Mar 14 21:09:07 mmook, i got options rxantenna 1 txantenna1 and diversity 0 with ht+ and noscan 1 and it seems much nicer this time, around 28/32 Mar 14 22:18:50 hauke * r30942 /trunk/target/linux/brcm47xx/patches-3.2/ (56 files): Mar 14 22:18:51 brcm47xx: move and rename the patches Mar 14 22:18:51 The patches are now grouped by the part what they are doing and are using three digest numbers. Mar 14 22:18:51 This does not remove or adds anything Mar 14 23:30:11 hauke * r30943 /trunk/target/linux/brcm47xx/ (14 files in 2 dirs): Mar 14 23:30:11 brcm47xx: add support for NAND flash on devices using bcma Mar 14 23:30:11 This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2. Mar 14 23:30:11 Thank you Tathagata Das for the patch **** ENDING LOGGING AT Thu Mar 15 02:59:58 2012