**** BEGIN LOGGING AT Sun Oct 07 02:59:58 2012 Oct 07 05:06:47 DonkeyHotei: [florian] does Oct 07 05:07:58 of course Oct 07 05:10:07 loswillios: i'm tinkering with ar7 again atm Oct 07 05:11:36 I couln't get wan to work with a build last week, haven't looked really hard why though Oct 07 05:11:50 a few weeks ago, wan worked, but no masquerading Oct 07 05:12:08 maybe switch issues, dunno Oct 07 05:12:17 i am seeing several issues Oct 07 05:15:50 for one, it seems to make the mac address of the wan always the same as the lan, which is not good Oct 07 05:16:22 i have an uncommitted patchset i am testing with Oct 07 05:17:33 Ji, anyone working on ramips? Oct 07 05:18:47 Hi, anyone working on ramips? I'm having problems with the ethernet switch for a port I'm trying to do Oct 07 05:19:29 i'm very out of the loop, but last i knew, ramips was juhosg's department Oct 07 05:24:19 loswillios: other than that, my biggest issue atm is not seeing the ADM6996L Oct 07 05:29:24 DonkeyHotei: which device? Oct 07 05:29:54 i have been testing on several Oct 07 05:30:34 actiontec gt704wg and pk5000, linksys wag54gp2, speedport w501v Oct 07 05:31:01 of those, the linksys is the only one with a 6996L Oct 07 05:31:03 I only have a w701v available Oct 07 05:31:13 what switch does it have? Oct 07 05:32:01 ADM6996LC Oct 07 05:32:34 Thank you DonkeyHotei Oct 07 05:34:45 loswillios: is the LC different from the L? Oct 07 05:34:59 and does the phy driver recognize it? Oct 07 05:35:14 and is it on cpmac high, or cpmac low? Oct 07 05:35:29 (assuming the device has both) Oct 07 05:35:45 which ar7 chip does it have? Oct 07 05:37:30 apparently its a little different, but just subtle Oct 07 05:37:55 bbl, it's too late here Oct 07 05:38:22 late? Oct 07 05:38:29 http://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/t_com/speedportw701v Oct 07 05:38:45 well, early. sleeping time ;) Oct 07 05:38:51 i thought you were in europe Oct 07 05:39:02 exactly Oct 07 05:39:34 ok, it has an ohio, so no high/low cpmac Oct 07 05:40:38 does the phy driver work for you on it? Oct 07 08:39:20 build #61 of rdc is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/rdc/builds/61 Oct 07 09:14:32 <_trine> anyone who has a Donkey Hotel is ok with me :) Oct 07 10:53:07 _trine: as i told you before, that's an i, not an L Oct 07 10:53:25 <_trine> I know Oct 07 10:53:47 <_trine> but should it not then be donquehotei :) Oct 07 10:54:18 <_trine> I like donkey hotel better it makes me smile Oct 07 11:00:56 <_trine> I need something to make me feel happier this damn gout is painful Oct 07 11:13:35 build #86 of orion is complete: Failure [failed compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/86 Oct 07 12:38:40 build #80 of uml is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/80 Oct 07 17:29:05 hmm, weird, latest trunk on wr1043nd reboots the router when i do one stream iperf test from a windows w7 to it, after few seconds of running at ~ 30 Mbit/sec it crashes and reboots with: http://pastebin.com/C0vd5pVg Oct 07 17:31:15 dape: can you build with KALLSYMS enabled please ? Oct 07 17:31:24 ok :( Oct 07 17:31:52 i'm wary of my fan, i think its dying :P Oct 07 17:32:30 i also encountered a reboot today on r33633 during a single torrent download (transmission) Oct 07 17:32:32 wndr3800 Oct 07 17:32:48 reboots didn't happen since then, but weird still Oct 07 17:33:07 i doubt all i said now gives any useful info, but still :) Oct 07 17:33:12 blogic, ping you when i'm ready, ~ 30 min Oct 07 18:12:33 dape: ok Oct 07 18:13:49 blogic, http://pastebin.com/g4VeDjai by the way, i installed uclibcxx and iperf from aa 12.09 , didnt included them two with my trunk build Oct 07 18:14:48 r33444 worked fine, this has the same settings, except kallsyms Oct 07 18:17:56 i see i had exactly 33 seconds of iperf testing ~ 33 Mbit/sec Oct 07 18:18:32 router had only WAN, i was connected via wireless with a tp-link usb dongle Oct 07 18:38:46 dape: over cable or over wifi ? Oct 07 18:39:27 only wan port connected to pppoe isp, i was doing iperf tests via wifi ht20 ch 6 20dbm Oct 07 18:39:37 ok Oct 07 18:39:42 can oyu try via cable ? Oct 07 18:46:01 i can but its hard to have serial access there Oct 07 18:46:44 let me hook myself here, brb Oct 07 18:59:30 blogic, tested with this thinkpad for 180 seconds, 22 MB/sec, no problem whatsover Oct 07 19:00:39 ok Oct 07 19:00:41 thx ! Oct 07 19:00:55 thank you, if is there anything else, i have it ready here Oct 07 19:01:03 yes Oct 07 19:01:09 i will try to reproduce tomorrow Oct 07 19:01:35 should i try compiling trunk with trunk iperf and uclibxxx? Oct 07 19:02:07 these two i wgetted and installed from AA 12.09 repo Oct 07 19:02:34 please Oct 07 19:45:07 blogic, uhm.. with iperf installed in the firmware, iperf stopped after 15 seconds, serial console freeze.. Oct 07 21:40:34 build #87 of brcm47xx is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/87 Oct 07 21:41:23 build #83 of cobalt is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/83 Oct 07 21:59:04 build #88 of orion is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/88 Oct 07 22:01:20 build #80 of pxcab is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/pxcab/builds/80 Oct 07 22:07:12 loswillios: the mdio bus seems to be looking at only cpmac-high and not cpmac-low Oct 07 22:09:36 build #84 of lantiq is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/84 Oct 07 22:10:38 build #85 of ramips is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/85 Oct 07 22:12:04 build #79 of rb532 is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/79 Oct 07 22:13:17 build #79 of ppc44x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/79 Oct 07 22:41:45 build #82 of uml is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/82 Oct 07 22:42:24 build #77 of x86 is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/77 Oct 07 22:45:46 build #70 of sibyte is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/70 Oct 07 22:49:33 build #84 of ppc40x is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/84 Oct 07 22:53:29 build #89 of s3c24xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/s3c24xx/builds/89 Oct 07 23:14:38 build #76 of ar7 is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/76 Oct 07 23:15:39 build #71 of avr32 is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/71 Oct 07 23:30:57 build #92 of at91 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/92 Oct 07 23:35:03 build #71 of xburst is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/71 Oct 07 23:37:33 build #60 of iop32x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/60 Oct 07 23:39:52 build #60 of etrax is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/etrax/builds/60 Oct 07 23:43:29 build #90 of brcm63xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/90 Oct 07 23:44:36 build #67 of kirkwood is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/67 Oct 07 23:44:40 build #63 of ar71xx is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/63 Oct 07 23:45:50 build #88 of atheros is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/88 Oct 07 23:47:10 build #57 of gemini is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/57 Oct 07 23:48:16 anyone still up who could help with cpmac? Oct 07 23:48:39 DonkeyHotei: what is the problem Oct 07 23:50:23 well, the mdio bus enumerates a phy on cpmac high, but not cpmac low Oct 07 23:51:13 the actiontec and the linksys both have a 7300, but the actiontec's phy is on high, and the linksys's is on low Oct 07 23:51:31 the mdio bus comes up empty on the linksys Oct 07 23:51:43 DonkeyHotei: sorry, cant help you there Oct 07 23:52:54 i was hoping [florian] or nbd or loswillios might have some idea, but it's late in europe now Oct 08 00:16:18 build #63 of rdc is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/rdc/builds/63 Oct 08 00:17:36 build #54 of mcs814x is complete: Failure [failed compile_2] Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/54 Oct 08 00:18:33 build #54 of octeon is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/54 Oct 08 00:25:26 build #60 of ep93xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/60 Oct 08 01:21:27 anyone working with ramips port? Oct 08 01:22:02 build #68 of ixp4xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/68 Oct 08 01:59:06 build #64 of au1000 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/64 Oct 08 02:07:26 build #58 of adm5120 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/58 Oct 08 02:10:53 build #56 of mpc52xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/56 **** ENDING LOGGING AT Mon Oct 08 02:59:58 2012