**** BEGIN LOGGING AT Fri Dec 21 02:59:59 2012 Dec 21 07:12:13 build #128 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/128 Dec 21 10:38:45 mirko: package/base-files/files/lib/upgrade/common.sh's pivot function needs renaming as sysupgrade is sourcing the newly merged pivot function from package/base-files/files/lib/functions.sh instead (#12652) Dec 21 10:39:27 juhosg r34813 trunk/target/linux/generic/patches-3.3/132-solos-dma.patch * kernel: add solos-pci update for 3.3 Dec 21 10:42:12 juhosg r34814 branches/attitude_adjustment/target/linux/generic/patches-3.3/132-solos-dma.patch * AA: kernel: add solos-pci update for 3.3 Dec 21 10:54:53 [juhosg: refresh the patch with quilt] Dec 21 10:54:53 Dec 21 10:54:53 Signed-off-by: David Woodhouse Dec 21 10:55:02 is there a make target to do that? Or some easy way? Dec 21 10:57:32 make target/refresh Dec 21 10:58:33 thanks Dec 21 11:02:42 build #110 of avr32 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/110 Dec 21 11:04:13 swalker: pong Dec 21 11:17:05 build #95 of iop32x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/95 Dec 21 11:54:38 swalker: I don't get it - there's no 2 pivot-functions Dec 21 11:55:36 ah! Dec 21 12:06:09 build #122 of ppc40x is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/122 Dec 21 12:08:21 build #92 of gemini is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/92 Dec 21 12:09:25 swalker: should be fixed, thanks for pointing out Dec 21 12:11:12 mirko r34815 trunk/package/base-files/files/lib/upgrade/common.sh Dec 21 12:11:12 [package/base-files] hot-fix nameclash in sysupgrade: rename pivot() to supivot() in sysupgrade Dec 21 12:31:41 build #122 of cobalt is complete: Failure [failed shell_17] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/122 Dec 21 13:48:05 blogic r34816 trunk/target/linux/generic/files/drivers/net/phy/rtl8366_smi.c * [kernel] make to rtl8366_smi of binding use gpio_is_valid Dec 21 13:48:10 blogic r34817 trunk/package/platform/lantiq/ltq-adsl-fw/Makefile * [lantiq] properly symlink the adsl firmware Dec 21 13:48:15 blogic r34818 trunk/package/platform/lantiq/ltq-adsl-app/files/dsl_control * [lantiq] minor cleanup for adsl firmware handling Dec 21 13:48:20 blogic r34819 trunk/package/platform/lantiq/ltq-adsl-fw/Makefile * [lantiq] adsl firmware in wrong submenu Dec 21 13:48:25 blogic r34820 trunk/target/linux/lantiq/patches-3.7/0118-owrt-adds-PHY11G-firmware-blobs.patch * [lantiq] refresh patch and install v1.1 gphy blobs Dec 21 13:48:30 blogic r34821 trunk/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch * [lantiq] add more lantiq phy ids based on daniels uboot code Dec 21 13:48:35 blogic r34822 trunk/target/linux/lantiq/patches-3.7/0117-NET-MIPS-lantiq-adds-xrx200-net.patch * [lantiq] add phy-reset gpio handling to xrx200-net Dec 21 13:48:40 blogic r34823 trunk/target/linux/lantiq/base-files/etc/hotplug.d/button/10-generic.sh * [lantiq] improve button handling Dec 21 13:48:45 blogic r34824 trunk/target/linux/ (7 files in 2 dirs) * [lantiq] more devicetree fixes Dec 21 14:10:19 I'm currently having some pmtu issues with the 3.3.8 kernel. openwrt with a 3.6.11 kernel works fine though. I'd like to repeat my tests with a 3.4.24 - what is the recommended way to build such a kernel? Dec 21 14:11:26 I modified target/linux/x86/Makefile, and I copied the config-3.3 file to config-3.4 - what is the best way to update this files symbols now? Dec 21 14:42:20 blogic r34825 trunk/target/linux/lantiq/image/FRITZ3370.dts * [lantiq] fix typo inside fritz3370 devicetree file Dec 21 14:42:25 blogic r34826 trunk/target/linux/lantiq/patches-3.7/0115-NET-PHY-adds-driver-for-lantiq-PHY11G.patch * [lantiq] add missing PHY_BASIC_FEATURES to 100mbit phys Dec 21 15:05:14 acinonyx r34827 branches/attitude_adjustment/tools/ipkg-utils/patches/200-force_gnu_format.patch * AA: backport: "[tools] ipkg-utils: Force gnu format for tar (#12496)" Dec 21 17:57:09 Hello All. I have got a dlink route DIR-615 h/w k2a Dec 21 17:58:33 I need to determine can I flash firmware to the router or not. Dec 21 17:59:02 I login to the router. Dec 21 18:01:42 Some commands output are published on http://kds.dreamwidth.org/619.html Dec 21 18:26:23 juhosg r34828 packages/utils/nut/ Makefile files/ups.init files files/upsmon.init * nut: add initscripts for upsd and upsmon, create config from UCI Dec 21 18:26:25 juhosg r34829 packages/utils/nut/Makefile * nut: install development files for libupsclient Dec 21 18:26:26 juhosg r34830 packages/utils/collectd/Makefile * collectd: enable nut plugin Dec 21 18:26:28 juhosg r34831 packages/utils/collectd/ patches/130-timeleft-max.patch Makefile * collectd: remove bogus maximum of 3600 seconds for 'timeleft' Dec 21 18:26:30 juhosg r34832 packages/utils/flashrom/ patches/001-msr_dev_path.patch Makefile * flashrom: remove broken msr path change Dec 21 18:34:17 juhosg r34833 branches/packages_12.09/utils/ flashrom/patches/001-msr_dev_path.patch flashrom/Makefile * AA: flashrom: remove broken msr path change Dec 21 19:02:05 ping Delboy Dec 21 20:04:39 blogic r34834 trunk/package/system/gpio-button-hotplug/src/gpio-button-hotplug.c * [gpio-button-hotplug] add OF binding Dec 21 20:04:45 blogic r34835 trunk/target/linux/ lantiq/image/WBMR.dts lantiq/xway/profiles/buffalo.mk * [lantiq] minor tweaks to WBMR image Dec 21 20:04:50 blogic r34836 trunk/target/linux/lantiq/base-files/etc/uci-defaults/wps * [lantiq] adds script to set wps info on boards with a wps button Dec 21 20:04:55 blogic r34837 trunk/target/linux/ lantiq/patches-3.7/0127-lantiq_etop-Fix-supported-modes-flag.patch lantiq/patches-3.7/0126-lantiq_etop-Change-MDIO-clock.patch Dec 21 20:04:55 [lantiq] Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143) Dec 21 20:05:02 blogic r34838 trunk/target/linux/lantiq/base-files/etc/uci-defaults/network * [lantiq] default switch setup for WBMR Dec 21 20:05:10 blogic r34839 trunk/target/linux/lantiq/xway/target.mk * [lantiq] dont use input layer for gpio buttons Dec 21 20:12:07 blogic? Dec 21 20:12:39 yes Dec 21 20:12:41 hi Dec 21 20:12:50 looking at collectd support for ADSL line stats Dec 21 20:12:55 ok Dec 21 20:13:06 then I realised there was a thread about it on the mailing list recently, referring to one earlier... so I'm about to go read up on that Dec 21 20:13:13 but do you have any recollection of the current status? Dec 21 20:13:15 ok Dec 21 20:13:24 we should at least make sure all drivers are exporting line stats in a *uniform* manner Dec 21 20:13:31 on lantiq there is a script to get all the data from the driver Dec 21 20:13:37 yes Dec 21 20:13:38 perhaps an adsl/ subdir under /sys/class/atm/$dev/ Dec 21 20:13:42 please Dec 21 20:13:48 yeah, on solos we have stuff in /sys/class/atm/$dev/parameters/ Dec 21 20:13:56 ok Dec 21 20:14:00 and I don't remember for usbatm. I think it's harder to get there. Dec 21 20:14:07 i will look into it Dec 21 20:14:11 and tweak the driver Dec 21 20:14:19 so I was going to do a collectd module for it, but I'll look over the ml thread first. Dec 21 20:14:52 is Frank Meerkötter in here? Dec 21 20:20:06 build #95 of ep93xx is complete: Exception [exception shell MasterShellCommand_1] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/95 Dec 21 20:21:39 dwmw2_gone: i think he is not on irc Dec 21 20:32:20 cxacru seems to create the parameter files in sysfs under the *usb* device Dec 21 20:39:40 build #101 of au1000 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/101 Dec 21 21:03:03 build #89 of mcs814x is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/89 Dec 21 21:03:24 dwmw2_gone: hmmm Dec 21 21:03:36 does solos just "run" ? Dec 21 21:03:45 or do you need to do a bring up of the dsl line Dec 21 21:04:04 i owuld like to have a ledtrigger for atm Dec 21 21:04:04 it just runs Dec 21 21:04:07 ok Dec 21 21:04:15 can we get an event for showtime ? Dec 21 21:04:20 you can echo Abort or Start to /sys/class/atm/solos-pci%d/parameters/ActivateLine Dec 21 21:04:26 yes, we can do that Dec 21 21:04:33 ok Dec 21 21:04:33 we do have an event at the moment Dec 21 21:04:41 we get an unsolicited status packet from the driver Dec 21 21:04:49 we could hook that up to an LED trigger fairly easily Dec 21 21:05:01 hmmm Dec 21 21:05:09 i'll look into that later tonight i think Dec 21 21:05:39 i am on the duo led patch just now Dec 21 21:06:29 * dwmw2_gone adding UPS status to the luci banner Dec 21 21:06:35 now I know how to do that kind of thing :) Dec 21 21:06:45 haha Dec 21 21:06:46 [ 13.216000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0) Dec 21 21:06:51 i am trying to hunt that one Dec 21 21:06:53 geos.infradead.org | OpenWrt Attitude Adjustment 12.09-rc1 | Dec 21 21:06:54 Load: 0.16 0.20 0.17 Dec 21 21:06:54 | UPS Status: OL CHRG Dec 21 21:06:54 Dec 21 21:06:54 Dec 21 21:06:54 | Auto Refresh: Dec 21 21:06:56 on Dec 21 21:06:58 Dec 21 21:07:00 Dec 21 21:08:53 hm, except if you look there *without* logging in you get Dec 21 21:08:58 A runtime error occured: [string "/usr/lib/lua/luci/view/themes/openwrt.org/h..."]:23: attempt to index field 'fs' (a nil value) Dec 21 21:11:22 aha, fixed Dec 21 21:15:49 shiny. http://david.woodhou.se/luci-ups.png Dec 21 21:16:20 neat Dec 21 21:16:38 should make it do colours too Dec 21 21:17:09 going to need some way for the luci-upsstat script to know which UPS to talk to, too. Dec 21 21:20:44 blogic: that's a missing $(P_V4)nf_nat_ipv4 on include/netfilter.mk's CONFIG_NF_NAT line for 3.7 afaik Dec 21 21:21:00 mirko: nice, thanks Dec 21 21:21:40 swalker: yes Dec 21 21:21:52 i am building a test image just now Dec 21 21:23:40 blogic: there's still some DNAT issue unless it's local only Dec 21 21:27:46 can you elaborate ? Dec 21 21:43:44 blogic: http://pastebin.com/raw.php?i=JHtGYsEN Dec 21 21:45:16 * dwmw2_gone shudders at the thought of NAT Dec 21 21:45:52 not really something I'd had to ponder often, but having looked at the various special hacks for different algorithms, I find it thoroughly horrid Dec 21 21:49:13 ok Dec 21 22:31:41 build #123 of lantiq is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/123 Dec 21 22:35:55 build #118 of rb532 is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/118 Dec 21 22:39:57 build #118 of ppc44x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/118 Dec 21 22:42:32 blogic: the problem was a missing $(P_XT)xt_nat on the same netfilter.mk line Dec 21 23:53:05 build #130 of brcm63xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/130 Dec 22 00:17:20 build #127 of brcm47xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/127 Dec 22 00:50:11 build #93 of adm5120 is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/93 Dec 22 00:53:15 build #108 of sibyte is complete: Failure [failed shell shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/108 Dec 22 01:30:50 build #123 of cobalt is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/123 Dec 22 01:54:16 build #128 of atheros is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/128 Dec 22 02:07:04 build #128 of brcm47xx is complete: Exception [exception MasterShellCommand] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/128 Dec 22 02:42:26 build #114 of ar7 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/114 **** ENDING LOGGING AT Sat Dec 22 02:59:58 2012