**** BEGIN LOGGING AT Sat Dec 29 02:59:59 2012 Dec 29 03:13:28 build #135 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/135 Dec 29 05:21:09 Does anyone know if openvpn-polarssl can be made to work with standard openvpn (based on openssl)? I'm not having much luck... Dec 29 05:21:48 my certs are OK but I dont get any further Dec 29 05:36:19 ECONNREFUSED: Connection refused (code=146) Dec 29 06:54:01 build #101 of iop32x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/101 Dec 29 08:58:56 build #117 of avr32 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/117 Dec 29 09:02:56 build #98 of gemini is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/98 Dec 29 10:13:28 cyrus r34913 trunk/package/network/ ipv6/ipv6-support/Makefile ipv6/ipv6-support/files/support.sh ipv6/ipv6-support/files/dhcpv6.sh * ipv6-support: Use more consistent default values Dec 29 11:13:26 nbd r34914 trunk/include/cmake.mk Dec 29 11:13:26 cmake.mk: add support for overriding the source dir, and define the cmake prefix path to avoid picking up host libraries for target builds (patch by Henning Rogge) Dec 29 13:01:37 hi Dec 29 13:02:05 id like to use pulseaudio and the soundcard is allready working - aply can play sound - and amix finxed the soundcard Dec 29 13:02:15 but when i start pulseaduio it doesnt detect them Dec 29 13:02:18 check the permissions of /dev/snd/* Dec 29 13:02:29 afair pulse has no permissions to enumerate that by default Dec 29 13:07:18 jow_laptop it doesnt find the soundcard Dec 29 13:07:30 i also can't connect with pacmd to the daemon Dec 29 13:07:35 even as pulse user Dec 29 13:07:47 No PulseAudio daemon running, or not running as session daemon. Dec 29 13:08:11 and as I said, it usually does not find any soundcard because it has no permission to read /dev/snd/ Dec 29 13:08:47 jow_laptop: http://paste.debian.net/220062/ Dec 29 13:09:08 ok Dec 29 13:09:27 but aplay works nicely Dec 29 13:10:27 even the pulse user can play audio Dec 29 13:13:44 jow_laptop i just added jow_laptop i just added this packages for the usb soundcard Dec 29 13:13:47 kmod-sound-core - 3.6.11-1 Dec 29 13:13:49 do i maybe need more? Dec 29 13:13:51 kmod-usb-audio - 3.6.11-1 Dec 29 13:29:09 build #93 of octeon is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/93 Dec 29 13:53:41 juhosg r34915 trunk/target/linux/ ar71xx/patches-3.6/211-ar933x_uart-improve-serial-clock-calculation.patch ar71xx/patches-3.6/004-tty-serial-ar933x_uart-fix-baud-rate-calculation.patch * ar71xx: use a backported patch to fix AR933x UART baud rate calculation Dec 29 13:54:48 jow r34916 packages/net/xtables-addons/Makefile Dec 29 13:54:48 xtables-addons: make kmod-ipt-rawpost depend on kmod-ip6tables if CONFIG_IPV6=y to force enabling CONFIG_IP6_NF_IPTABLES in the kernel Dec 29 15:10:29 Kaloz: Is it possible to be added to a whitelist for openwrt-devel@? I read via gmame, but i can't send patches using git-send-email without being subscribed. Dec 29 15:11:25 jmccrohan: you can subscribe and turn off mail delivery in subscription options Dec 29 15:12:26 i do that with a number of gmane lists Dec 29 15:14:05 DonkeyHotei: Perfect, thank you. I forgot mailman had that option. :) Dec 29 15:14:35 not just mailman, but also majordomo and all similar Dec 29 15:15:39 Delboy: no, there is definitely no 3.3V coming from Tx; barely even half that Dec 29 15:20:04 DonkeyHotei: maybe that board is somehow broken Dec 29 15:20:22 but you can still flash openwrt without serial Dec 29 15:20:25 like, maybe a missing pull-up? Dec 29 15:21:20 i don't like doing this blind, especially since support for this board has been temporarily removed from trunk Dec 29 15:21:56 Delboy: if you know where Vcc is, i'd like to try _trine's method Dec 29 15:22:14 <_trine> what method Dec 29 15:22:25 the 10k resistor Dec 29 15:23:11 <_trine> that was only in answer to your question about what value of resistor you might use for a pullup,, I dont know if you actually need one Dec 29 15:23:23 <_trine> but it would not do any harm to try it Dec 29 15:23:37 <_trine> i was looking at what you typed before Dec 29 15:23:51 the problem with trying it is idk where Vcc is, and maybe Delboy might Dec 29 15:23:57 <_trine> you cant really measure a voltage on the TX pin Dec 29 15:24:05 <_trine> witha multimeter Dec 29 15:24:19 he says it measures 3.3 on his Dec 29 15:24:35 implying a pull-up Dec 29 15:24:39 <_trine> it might do but that does not mean it will be the same for you Dec 29 15:25:02 mine shows barely half that and does not work Dec 29 15:25:15 <_trine> the only way to measure the voltage on a TX pin is with an oscilloscope Dec 29 15:25:54 it seems to fluctuate or float Dec 29 15:26:32 Delboy: any clue where Vcc is? Dec 29 15:27:03 <_trine> well consider the case where it was being driven on and off ,, if you measure with a MM you will only see something less than the 3.3v Dec 29 15:27:41 <_trine> DonkeyHotei, have a look for the regulator chip then you will find VCC Dec 29 15:28:29 oh joy. :( Dec 29 15:30:52 <_trine> it will be a smallish chip check the number on it against http://www.alldatasheet.com/?gclid=CPSe-7P3v7QCFW3KtAod-TYAlQ Dec 29 15:31:05 <_trine> then you will succeed Dec 29 15:32:29 <_trine> and in anycase vcc is usually supplied on one of the pins associated with the serial connections on the router Dec 29 15:33:44 <_trine> why do you need this pullup resistor anyway Dec 29 15:34:04 <_trine> what output do you get from the serial cable Dec 29 15:36:36 <_trine> DonkeyHotei, if I was you I would check to make sure I was connected to a proper ground from the router to the usb converter Dec 29 15:37:11 <_trine> and that all your soldering was good ie no shorts or bad connections Dec 29 15:37:32 _trine: look at Delboy's photos on the wiki, and you'll see the odd duck i'm dealing with Dec 29 15:37:43 <_trine> you can use your MM to cheack that with power off to the router Dec 29 15:37:53 <_trine> link? Dec 29 15:40:28 http://wiki.openwrt.org/toh/gigaset/sx76x Dec 29 15:43:00 <_trine> WTF Dec 29 15:43:01 <_trine> GND pins are in second row (right of number 1) at 14 pin connector underneath serial pins, also board voltage is 3.3V so you will need resistors if you want to connect it directly to PC serial port, or you can use usb to serial adapters which are already at 3.3v. Dec 29 15:43:10 <_trine> who wrote that shit Dec 29 15:43:33 <_trine> resistors cannot regulate voltage Dec 29 15:43:49 <_trine> they can only limit current Dec 29 15:47:50 ohm's law, resistors create a voltage srop Dec 29 15:47:53 *drop Dec 29 15:48:02 <_trine> lol Dec 29 15:48:39 <_trine> and what happens to the voltage if the current drawn changes Dec 29 15:48:42 <_trine> :) Dec 29 15:49:15 anyway, i'm using a usb to 3.3V adapter, so that part does not apply to me Dec 29 15:49:46 _trine: i should remove that sentence, who knows how that got there ;) Dec 29 15:50:07 Delboy: any KNOWN Vcc points? Dec 29 15:50:15 nope Dec 29 15:50:28 *facepalm* Dec 29 15:50:32 <_trine> DonkeyHotei, the power supplies looking at that board seem to reside on the bottom righthand side Dec 29 15:50:54 <_trine> as you look a the picture Dec 29 15:51:41 <_trine> bottom to middle righthand side Dec 29 15:51:47 i'm sure there is a 3.3v test pin somewhere Dec 29 15:51:57 <_trine> there is bound to be Dec 29 15:53:03 Delboy: if you can take non-blurry high-res photos of the parts of your boards around the cpu/flash/eth area, i could see whether it populates something mine doesn't Dec 29 15:53:36 <_trine> DonkeyHotei, what output do you get from the serial ,, anything ? Dec 29 15:53:51 http://wiki.openwrt.org/lib/exe/mediamanager.php?ns=toh%3Agigaset Dec 29 15:54:14 _trine: Rx gives the expected 3.3, and Tx fluctuates at 1.x Dec 29 15:54:30 <_trine> noooooooooo Dec 29 15:54:49 <_trine> what output,, any characters ? Dec 29 15:55:01 <_trine> in the terminal Dec 29 15:55:33 <_trine> anything at all? Dec 29 15:58:18 _trine: no Dec 29 15:58:35 Delboy: i'll compare the board and report back Dec 29 15:59:49 <_trine> I cant see the serial connections on that picture Dec 29 16:00:16 <_trine> where abouts are they Dec 29 16:00:56 <_trine> http://wiki.openwrt.org/_detail/toh/gigaset/dsc00453.jpg?id=toh%3Agigaset%3Asx76x Dec 29 16:01:04 <_trine> thats what I am looking at Dec 29 16:01:30 they're on the underside Dec 29 16:01:39 under the cpu itself Dec 29 16:02:14 <_trine> I see Dec 29 16:02:49 <_trine> on that pad of 14 I would think you would find vcc Dec 29 16:03:07 which one, though? Dec 29 16:03:20 juhosg r34917 trunk/target/linux/ar71xx/patches-3.6/611-MIPS-ath79-ap135-support.patch * ar71xx: Add support for AP135 Dec 29 16:03:22 juhosg r34918 trunk/target/linux/ ar71xx/base-files/etc/diag.sh ar71xx/base-files/lib/ar71xx.sh ar71xx/base-files/lib/upgrade/platform.sh ar71xx/base-files/etc/uci-defaults/network * ar71xx: Add userspace support for AP135 Dec 29 16:03:23 <_trine> well measure it Dec 29 16:03:24 juhosg r34919 trunk/target/linux/ ar71xx/generic/profiles/atheros.mk ar71xx/image/Makefile * ar71xx: Build the AP135 images Dec 29 16:03:27 juhosg r34920 trunk/target/linux/ (99 files in 2 dirs) * ar71xx: add support for 3.7 Dec 29 16:03:38 <_trine> and dont measure TX or RX Dec 29 16:05:08 <_trine> but DonkeyHotei I dont think thats going to solve your problem Dec 29 16:05:14 i don't see anything depopulated that's populated in the pic Dec 29 16:05:32 <_trine> you should get some characters even if they are garbage Dec 29 16:05:43 none Dec 29 16:06:06 <_trine> well that would indicate to me you are not connected to the right place Dec 29 16:06:12 DonkeyHotei: have you set your port settings to 115200 8n1 Dec 29 16:06:19 _trine: it's the place in the pic Dec 29 16:06:24 Delboy: yes Dec 29 16:06:38 <_trine> check check and check again Dec 29 16:06:54 i did, many times Dec 29 16:07:17 even desoldered and checked the point by itself Dec 29 16:07:19 <_trine> and have you tried swapping around TX and RX Dec 29 16:08:02 i think i did Dec 29 16:08:44 <_trine> give it a try Dec 29 16:09:17 i'll try connecting "Rx" and ground only, to see if i get chars from it Dec 29 16:13:59 nothing Dec 29 16:16:01 ok, now i've connected Rx the normal way, with no Tx, and just started pressing Enter repeatedly on powerup, and the boot seems to have halted Dec 29 16:16:32 <_trine> so its working? Dec 29 16:16:56 nothing has changed Dec 29 16:17:02 i have no Tx Dec 29 16:17:42 type reset and see if it reboots Dec 29 16:18:01 i already shut it off; hang on Dec 29 16:19:50 yes, that reboots it Dec 29 16:21:41 <_trine> DonkeyHotei, if you remove the connections of the usb converter from the router and then let tx and rx together do you see the characters outputted in the terminal Dec 29 16:22:08 huh? Dec 29 16:22:15 <_trine> you should be able to see what you type in the terminal if its working correctly Dec 29 16:22:28 i don't understand what you mean Dec 29 16:22:33 <_trine> remove the usb conveter from the router Dec 29 16:22:49 <_trine> then you will have the wires loose Dec 29 16:23:04 are you asking me to do a loopback test without the router? Dec 29 16:23:10 <_trine> then on the usb converter connect together tx and rx Dec 29 16:23:15 <_trine> yes Dec 29 16:23:22 <_trine> does it work Dec 29 16:23:24 <_trine> ? Dec 29 16:23:41 pointless, since the converter works perfectly on the netgear device and many others Dec 29 16:25:48 Delboy: do you know if maybe the 14-pin pad has a standard ejtag pinout? Dec 29 16:27:44 i think it does Dec 29 16:29:25 10k should be brown, black, orange, right? Dec 29 16:29:53 or is there an alternate coding? Dec 29 16:32:31 jow_laptop: thanks for your help i manged to get it working - as it seems udevtrigger has to run before i start pulseaudio Dec 29 16:46:36 juhosg r34921 packages/net/ (13 files in 3 dirs) * xtables-addons: build version 2.0 for kernel 3.7 onwards Dec 29 16:58:59 ok, i dug around and found a small resistor with brown, black, orange, gold Dec 29 17:07:19 vcc seems to be the bottom-right pad in the set of 14 Dec 29 17:16:59 _trine: which side of the resistor should the usb converter be on? Dec 29 17:34:55 never mind, i tried it both ways, nothing Dec 29 17:51:24 juhosg r34922 trunk/target/linux/ (6 files in 3 dirs) * ramips: rt305x: add kernel support for AirLive AIR3GII Dec 29 17:51:28 juhosg r34923 trunk/target/linux/ (5 files in 4 dirs) * ramips: add user-space support for Airlive AIR3GII Dec 29 17:51:29 juhosg r34924 trunk/target/linux/ramips/image/Makefile * ramips: build image for Airlive AIR3GII Dec 29 17:51:31 juhosg r34925 trunk/target/linux/ (6 files in 3 dirs) * ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router Dec 29 17:51:33 juhosg r34926 trunk/target/linux/ (7 files in 6 dirs) * ramips: add user-space support for the Planex MZK-W300NH2 Router Dec 29 17:51:36 juhosg r34927 trunk/target/linux/ramips/image/Makefile * ramips: build firmware image for the Planex MZK-W300NH2 Router Dec 29 18:00:52 juhosg r34928 packages/net/openconnect/Makefile * openconnect: update to 4.07 Dec 29 18:00:53 juhosg r34929 packages/net/cups/ patches/100-components.patch patches/100-makefile-targets.patch patches/160-ppdc.patch Makefile * cups: Update to 1.5.4 Dec 29 18:00:55 juhosg r34930 packages/net/cups/patches/200-str4181.patch * cups: Fix ipp compression Dec 29 18:00:56 juhosg r34931 packages/net/cups/patches/210-str4194.patch * cups: Fix endless loop Dec 29 18:00:58 juhosg r34932 packages/lang/4th/Makefile * 4th: update to 3.62.0 Dec 29 18:00:59 juhosg r34933 packages/net/sslh/ Makefile files/sslh.init patches/001-no_sslh_select.patch * sslh: Bump to v1.14 Dec 29 18:34:10 hi Dec 29 18:34:53 is there a way to use udevd in openwrt and get it started at startup? by now i have to manually start it and start udevtrigger afterwards Dec 29 19:26:17 build #129 of lantiq is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/129 Dec 29 19:59:20 jmccrohan: then subscribe and set no delivery in the options :) Dec 29 21:34:30 build #124 of rb532 is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/124 Dec 29 21:38:12 build #124 of ppc44x is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/124 Dec 30 00:33:15 Kaloz: Thanks. DonkeyHotei pointed me in that direction earlier :) Dec 30 02:38:22 Delboy: are you around by any chance? Dec 30 02:48:32 build #120 of ar7 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/120 Dec 30 02:54:06 build #114 of sibyte is complete: Failure [failed shell_11] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/114 **** ENDING LOGGING AT Sun Dec 30 02:59:59 2012