**** BEGIN LOGGING AT Mon Feb 11 02:59:58 2013 Feb 11 03:24:10 build #172 of uml is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/172 Feb 11 04:11:21 build #157 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/157 Feb 11 06:43:00 build #154 of ixp4xx is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/154 Feb 11 07:40:37 build #174 of cobalt is complete: Exception [exception shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/174 Feb 11 09:29:42 luka r35548 packages/net/asterisk-11.x/Makefile * [packages] asterisk-11.x: fix typo in CONFIGURE_ARGS Feb 11 10:05:44 juhosg r35549 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * generic: ar8216: fix PHY features setup Feb 11 10:47:09 luka r35550 packages/utils/ anyremote/patches/010-dont-add-host-includes.patch anyremote/files/anyremote.cfg anyremote/Makefile * [packages] anyremote: upgrade to version 6.2 Feb 11 10:58:59 luka r35551 packages/utils/ iioutils/Makefile iioutils * [packages] iioutils: add new package Feb 11 11:13:00 florian r35552 packages/utils/ open-plc-utils/Makefile open-plc-utils * open-plc-utils: add Qualcomm Atheros Open Powerline toolkit packages Feb 11 11:43:21 build #142 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/142 Feb 11 12:30:24 cyrus r35553 trunk/package/network/ipv6/odhcp6c/Makefile Feb 11 12:30:24 odhcp6c: Various bugfixes Feb 11 12:30:24 * Don't send undesired suggestions for preferred and valid lifetimes Feb 11 12:30:24 * Be less verbose in logging Feb 11 12:47:06 luka, ping Feb 11 13:13:52 fborges: pong Feb 11 13:14:08 juhosg r35554 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * generic: ar8216: use pr_* macros for kernel messages Feb 11 13:15:35 luka, Hi, I am the guy who submitted "zsh" the other day Feb 11 13:15:52 luka, I assume you are the same luka who merged it Feb 11 13:16:23 luka, I was going to ask about how to add an option to compile using ncurses or ncursesW Feb 11 13:16:41 luka but I found the documentation in the wiki already Feb 11 13:17:07 fborges: yes i'm the same guy Feb 11 13:18:07 fborges: i think you should put the smaller ncurses version by default Feb 11 13:18:14 and by the way why do we need both? Feb 11 13:19:02 luka, I didn't think we need both, you mentioned in your email that it would be nice to make it configurable Feb 11 13:19:22 luka, I added a comment about the curses libraries config in the commit message Feb 11 13:19:39 ah yes, that is correct Feb 11 13:19:58 luka, because it was something not obvious that caused me some trouble, so I thought it would be a good idea to document it somewhere Feb 11 13:20:12 well it's better to have it in a make menuconfig option then in commit message Feb 11 13:20:45 give me a sec Feb 11 13:21:22 you have both: --with-term-lib="ncurses ncursesw" \ Feb 11 13:21:47 but if we dont need both we shuld just use one here... Feb 11 13:22:09 and then we dont need option in make menuconfig Feb 11 13:22:17 luka, I see Feb 11 13:22:22 is there any reason why do we need both there Feb 11 13:22:51 luka, I was just being sloopy Feb 11 13:23:10 no problem Feb 11 13:23:29 luka, one question, my impression is that the build/Compile section in this file is unnecessary, is that correct? Feb 11 13:23:55 luka, I suppose that what I did is probably a reproduction of the defaults Feb 11 13:24:49 if you decide to remove Build/Compile section then your Package/zsh/install might change Feb 11 13:25:10 and now when i'm looking at it Build/Compile should be Build/Install Feb 11 13:25:44 because you are installing and not compiling Feb 11 13:25:51 juhosg r35555 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * generic: ar8216: use phydev instead of pdev everywhere Feb 11 13:26:47 luka can you point me where in the code I can see the defaults for each phase? Feb 11 13:29:26 fgrep Install include/* Feb 11 13:29:51 fborges: include/package.mk Feb 11 13:30:04 luka thanks Feb 11 14:04:15 anyone else experiences wifi link problems on recent AR9341 WiSoC based devices? Feb 11 14:05:31 i recently setup a TL-WA801NDv2 (AR9341) and can't get a stable link, though it's direct-line-of-sight and less than 100m Feb 11 14:05:52 i tried replacing it with a TL-WA801NDv1 (AR7420 + AR9285 or something like that) which doesn't have that problem Feb 11 14:06:23 is ath9k wifi support for the AR9341 considered to be stable? Feb 11 14:07:45 scanning shows almost the same results though and stability and throughput in close proximity of the AP is good, too Feb 11 14:08:03 SNR is also ok Feb 11 14:08:28 (on both sides) Feb 11 14:08:39 could be ACK-timeout / coverage-class related... Feb 11 14:08:44 any ideas anyone? Feb 11 14:25:58 mazilo r35556 packages/ net/freeswitch/patches/210-src-mod-endpoints-mod_dingaling-Makefile.patch net/freeswitch/Makefile net/freeswitch/patches/002-configure_in.patch Feb 11 14:25:58 removed dependencies on GNUTLs for mod_dingaling and minor fixes on sound packages. Feb 11 15:48:02 some of the IB4220-dev's here? i have trouble with pata_gemini: Unexpected Interrupt... I have no clue how to deal with it... this is since sysupgrade-ib4220-20130127.tar.gz Feb 11 15:53:01 florian r35557 packages/libs/elfutils/Makefile * elfutils: argp-standalone is just a build-time dependency (#12855) Feb 11 15:57:29 does this just mean my kernel is too big, or is it an indication of invalid lzma dict parameters or something? Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET Feb 11 15:57:44 (or just that loading directly from memory isn't ok? Feb 11 15:59:00 I'm trying to tftpboot 81000000 blah-uImage.lzma.bin then bootm 81000000 Feb 11 15:59:30 it's only a meg, and this board has 64meg ram... Feb 11 16:03:17 florian r35558 packages/libs/elfutils/Makefile * elfutils: remove argp-standalone dependency Feb 11 16:11:39 juhosg r35559 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * generic: ar8216: reuse the private data from ar8216_probe Feb 11 16:11:40 juhosg r35560 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * generic: ar8216: don't use ethernet device name in register_switch Feb 11 16:41:56 huh, the uboot on this board has a custom hacked httpd to do firmware upgrades Feb 11 16:42:18 hehe Feb 11 16:42:28 the one on mine has tftpd for them Feb 11 16:48:21 httpd thing: http://hk3jkxb7.kazz.am/snappysnapp.png Feb 11 16:54:42 ntpd: reply from 128.233.154.245: reach 0x3f offset -0.002082 delay 0.090487 status 0x24 strat 1 refid 0x47505300 rootdelay 0.000000 Feb 11 16:54:45 ntpd: poll 32s, sockets:0, poll interval:32s Feb 11 16:54:46 Alarm clock Feb 11 16:54:48 root@OpenWrt:~# Feb 11 16:54:58 is ntpd supposed to die with run in the forground? Feb 11 16:55:01 juhosg r35561 trunk/target/linux/ar71xx/base-files/etc/uci-defaults/02_network * ar71xx: use switchX names in network configuration Feb 11 16:57:40 juhosg r35562 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * ar8216: remove superfluous code from ar8216_config_init Feb 11 16:57:53 SmugLeaf: what does the manual say? :X Feb 11 16:58:23 SmugLeaf: "Alarm clock" may be indicating that it received an unexpected SIGALRM, idk Feb 11 17:05:06 zinx: > manpage Feb 11 17:05:09 > on openwrt Feb 11 17:05:13 AHAHAHAHAHAHAHA Feb 11 17:05:17 * SmugLeaf cries Feb 11 17:05:34 SmugLeaf: ... ntpd isn't only on OpenWrt, and it DOES have man pages. Feb 11 17:06:11 zinx: that is busybox ntpd, it most likely has no man page Feb 11 17:06:30 jow_laptop: you'd be surprised Feb 11 17:06:54 zinx: I would be indeed, as I patched into busybox myself, at least in the older versions Feb 11 17:07:09 and I would also be surprised if it'd cover the patches we made to it Feb 11 17:07:59 jow_laptop: do you know the average check interval? Feb 11 17:08:16 jow_laptop: idk, i'd think the OpenNTPD man pages are mostly applicable Feb 11 17:09:30 jow_laptop: i guess it ignores most of the options, though. Feb 11 17:09:52 SmugLeaf: yes it is supposed to die like this, at least according to its source code Feb 11 17:10:02 SmugLeaf: what are you calling it with? Feb 11 17:11:07 -dn -p ... -p ... Feb 11 17:13:54 multiple pid files? Feb 11 17:14:16 * zinx should look at the busybox in OpenWrt instead >_< Feb 11 17:15:10 build #181 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/181 Feb 11 17:15:56 zinx: yes, 17 pidfiles Feb 11 17:16:04 ~_~ Feb 11 17:16:07 SmugLeaf: i... do not understand why Feb 11 17:16:16 --peer Feb 11 17:16:21 :X Feb 11 17:16:39 :3 Feb 11 17:17:23 jow_laptop: I would have prefered it didn't die like that so I could measure the average check/adjust timing Feb 11 17:17:30 mmkay Feb 11 17:17:51 build #139 of gemini is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/139 Feb 11 17:18:43 SmugLeaf: and you're not using -q? Feb 11 17:19:01 nope Feb 11 17:19:15 which is why I was like... why are you dying Feb 11 17:19:44 SmugLeaf: the SIGALRM is caused by -q .. Feb 11 17:19:46 florian r35563 packages/libs/elfutils/Makefile * elfutils: revert r35558 Feb 11 17:23:25 zinx: only I"M NOT CALLING WITH -q Feb 11 17:24:52 SmugLeaf: the arg list is hinky Feb 11 17:25:01 SmugLeaf: leave -d off Feb 11 17:25:18 SmugLeaf: it's ignored anyway, and i think it's setting OPT_qq Feb 11 17:26:21 zinx: then I get no output Feb 11 17:26:27 I need the debug Feb 11 17:26:39 jow_laptop: ping Feb 11 17:26:41 SmugLeaf: did you try it? Feb 11 17:27:01 yes Feb 11 17:27:05 it's running Feb 11 17:27:13 and I have no verbosity Feb 11 17:27:15 with no debug? did you use -n? Feb 11 17:27:25 -n is no daemon Feb 11 17:27:30 -d is debug Feb 11 17:27:46 SmugLeaf: strange, the busybox in my OpenWrt source tree completely ignores -d Feb 11 17:27:58 I'm not suprised I get nothing without -d Feb 11 17:28:00 (or, rather, is supposed to) Feb 11 17:28:09 I'm suprised -d implys -q Feb 11 17:28:13 jow_laptop: ping Feb 11 17:28:35 SmugLeaf: is your ntpd from busybox, or is it some other ntpd? Feb 11 17:28:45 busybox Feb 11 17:28:49 SmugLeaf: ? Feb 11 17:29:05 hmm Feb 11 17:29:08 jow_laptop: is -d supposed to imply -q? Feb 11 17:29:26 i think i must be misunderstanding busybox's argument parsing stuff Feb 11 17:29:52 SmugLeaf: it's trying to use an extra bit for determining if OPT_q has been set Feb 11 17:29:59 SmugLeaf: is it exiting after 50 seconds? Feb 11 17:30:02 of the first reply Feb 11 17:30:08 SmugLeaf: -n is Feb 11 17:31:09 start() { local peers local args="-n" Feb 11 17:31:22 jow_laptop: why doesn't the init script die off then? Feb 11 17:34:36 anyway, i fail to see where -n is supposed to imply -q, but i see that depending on how arguments are handled, OPT_qq could be getting set where it isn't supposed to Feb 11 17:39:12 ghey Feb 11 18:22:10 Do you know if somebody is working in BCM33xx target? Feb 11 18:23:07 Only found old patches published by florian Feb 11 18:28:51 Pteridium: not that I know of, likely caused by the lack of bcm33xx devices on the open market Feb 11 18:29:23 but in Spain there are a lot Feb 11 18:29:39 searching... Feb 11 18:30:29 http://wiki.openwrt.org/toh/cisco/epc3825 Feb 11 18:30:51 netgear CG3100d Ecos firmware Feb 11 18:31:22 http://wiki.openwrt.org/toh/scientific.atlanta/dpc2203c Feb 11 18:32:05 http://wiki.openwrt.org/toh/thomson/thg520 Feb 11 18:32:13 and some more Feb 11 18:33:13 maybe the problem will be the bootloader Feb 11 18:36:18 bump Feb 11 18:39:59 KanjiMonster: thanks Feb 11 18:40:18 seems to be a dead end. :-/ Feb 11 18:40:39 Pteridium: but can you buy them, or do you have to be a subscriber to get them? Feb 11 18:40:49 bleh, mktplink firmware enforces flash limits but I was building an initramfs image to run from memory... Feb 11 18:41:06 in ebay there are a lot Feb 11 18:41:47 the linksys and the netgear i think they have a BCM3380 Feb 11 18:41:58 or a BCM3368 Feb 11 18:42:06 i'm not sure Feb 11 18:43:36 http://www.ebay.es/dsc/i.html?LH_TitleDesc=1&rt=nc&_nkw=cg3100&_sop=1&_trksid=p3286.c0.m301 Feb 11 18:46:10 netgear cg3100d http://imageshack.us/photo/my-images/269/dscn1474pv.jpg/ Feb 11 18:46:18 what causes "no such device" from mount? mount: mounting /dev/sda1 on /mnt/ failed: No such device Feb 11 18:46:42 wrong type Feb 11 18:46:53 karlp: -t partition_type Feb 11 18:47:05 hmm, I guess this sd card might not even be formatted properly. Feb 11 18:47:15 well Feb 11 18:47:21 it might be a superfloppy Feb 11 18:48:33 cisco epc3825 http://www.zero13wireless.net/foro/showthread.php?9603-Al-Descubierto!-Cisco-EPC-3825-%28aporte-por-ivchenko-%29 Feb 11 18:48:46 with gigabit ethernet Feb 11 18:50:05 KanjiMonster: maybe a lot of work for "nothing". Thanks for the answers. Feb 11 18:51:52 blogic: on my laptop mount says the card is vfat, but it's still nothing on the openwrt board. Feb 11 18:52:08 It's quite possible I need more modules too I suppose? Feb 11 18:52:25 for vfat yes Feb 11 18:52:33 but it could be superfloppy vfat Feb 11 18:53:10 and how would I tell them apart? Feb 11 18:53:31 Pteridium: there's also a general lack of developers (and porting takes time) Feb 11 18:54:05 http://fpaste.org/YIoA/ is the mount line on the laptop, Feb 11 18:55:04 KanjiMonster: but if someone sends a working patch with basic support, would it be accepted? Feb 11 18:55:31 karlp: it ususally tells in logread Feb 11 18:56:39 danitool: depends on the code quality and willingness to maintain it Feb 11 18:56:53 loswillios: http://fpaste.org/aMWO/ has the dmesg showing the card detected Feb 11 18:57:40 when you try to mount it Feb 11 18:59:13 nbd r35564 trunk/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c * ar71xx: allow unknown multicast frames to pass to the CPU on AR934x Feb 11 18:59:19 nbd r35565 trunk/package/ network/services/hostapd/files/hostapd.sh mac80211/files/lib/wifi/mac80211.sh Feb 11 18:59:19 mac80211/hostapd: short_preamble is a per-vif option and should be enabled by default Feb 11 18:59:23 nbd r35566 trunk/package/mac80211/patches/300-pending_work.patch * mac80211: add CCK rate support to minstrel_ht to improve range Feb 11 19:00:58 loswillios: nothing at all in logread from trying to mount Feb 11 19:08:09 often it's just a missing codepage module Feb 11 19:27:37 luka: how did you enable jtag mode on sx76x? Feb 11 21:41:25 juhosg r35567 trunk/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration * ar71xx: add script for automatic switch name migration Feb 11 21:50:53 DonkeyHotei: i never used jtag on lantiq boards Feb 11 21:58:51 jow r35568 trunk/package/network/ utils/iptables/patches/400-lenient-restore.patch utils/iptables/Makefile Feb 11 21:58:51 iptables: add --lenient switch to iptables-restore and ip6tables-restore that allows to skip erroneous lines Feb 11 22:14:47 jow r35569 trunk/package/network/utils/iptables/Makefile * iptables: fix bad PKG_RELEASE in previous commit **** ENDING LOGGING AT Tue Feb 12 02:59:58 2013