**** BEGIN LOGGING AT Thu Apr 11 02:59:59 2013
Apr 11 04:18:49 <builder> build #217 of avr32 is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/217
Apr 11 06:49:13 <dtaht> nbd is a far, far braver man than I am.
Apr 11 06:50:16 <blogic> ok
Apr 11 06:50:24 <blogic> what leads you to this realisation ?
Apr 11 06:59:42 <dtaht> he implemented fq_codel on everything.
Apr 11 06:59:49 <dtaht> on your entire userbsae
Apr 11 07:00:26 <dtaht> I mean, *I'm confident* it works and is better but as for a ton of edge cases like vpns dunno
Apr 11 07:00:35 * dtaht figures we'll find out fast.
Apr 11 07:00:39 <blogic> yes
Apr 11 07:00:42 <blogic> we will find out ;)
Apr 11 07:00:57 <blogic> and cyrusff enabled ipv6 for everyone aswell
Apr 11 07:01:45 <cyrusff> dtaht has a bad influence on us all :P
Apr 11 07:02:07 <dtaht> andrew mcgregor applauds the effort, too
Apr 11 07:02:20 * dtaht thinks it's the droogs
Apr 11 07:02:30 <dtaht> thank you guys for making the leap
Apr 11 07:02:42 * dtaht sits down to recompile for 6 boxes for battlemesh
Apr 11 07:05:15 <blogic> http://pastebin.com/cJ5MFHpq
Apr 11 07:05:21 <blogic> does that sound understandable ?
Apr 11 07:06:43 * dtaht thought AA shipped ages ago
Apr 11 07:07:21 <blogic> hahaha
Apr 11 07:07:24 <blogic> in a RC
Apr 11 07:07:26 <blogic> this si the final
Apr 11 07:07:42 <blogic> wife got pregnant 1/2 through the release so things got stalled
Apr 11 07:07:57 <blogic> and as always the $mates (TM) were to busy with important stuff to help ;)
Apr 11 07:08:13 <blogic> busy as in ranting why the work is not done yet
Apr 11 07:08:30 <blogic> dtaht: specially you should know that if you want to get things done you need to do them yourself
Apr 11 07:11:13 <dtaht> yea, well, release management is a PITA. What do you do, draw lots? Load up a gun with one bullet in it?
Apr 11 07:13:52 <builder> build #218 of rb532 is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/218
Apr 11 07:15:00 <blogic> dtaht: 1st i pay lots of money for it
Apr 11 07:15:25 <blogic> becasue the ranting trolls were busy ranting and had no time to help find a suitable server, so i rented a beast for 65€ / month
Apr 11 07:15:33 <blogic> and had it running for 14 months now
Apr 11 07:15:42 <blogic> so the release cost me close to 1k€
Apr 11 07:16:23 <Guest99894> blogic r36312 trunk/target/linux/lantiq/patches-3.8/0042-PINCTRL-lantiq-fix-pinmux.patch * [lantiq] add missing pinmux patch
Apr 11 07:17:03 <builder> build #218 of ppc44x is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/218
Apr 11 08:27:02 <blogic> _rmk_: ping
Apr 11 08:27:13 <blogic> i have a bt openreach vdsl modem on my desk
Apr 11 08:27:22 <blogic> i am making a device tree for it now
Apr 11 08:27:33 <blogic> dwmw2: not sure if this is of interest for you aswell
Apr 11 08:27:40 <blogic> its a trivial device
Apr 11 08:27:49 <blogic> 2 lans and 1 vdsl port
Apr 11 08:27:53 <blogic> no wifi, voice .....
Apr 11 08:28:37 <dtaht> CONFIG_PROCD_INIT=y is a good idea now?
Apr 11 08:29:01 <blogic> 2ermmm
Apr 11 08:29:02 <blogic> yes
Apr 11 08:29:14 <blogic> there is the bug with log flooding during sysupgrade
Apr 11 08:29:18 <blogic> i will address that today
Apr 11 08:29:30 <blogic> just want to get this modem up and running first
Apr 11 08:30:11 <dtaht> heh
Apr 11 08:30:21 * dtaht is doing major merging with tok
Apr 11 08:30:22 <dtaht> e
Apr 11 08:30:39 <blogic> ok
Apr 11 08:30:45 <blogic> merging what ?
Apr 11 08:30:47 * dtaht still uses xinetd for stuff
Apr 11 08:30:51 <blogic> oh
Apr 11 08:30:53 <blogic> ugly ;)
Apr 11 08:30:55 <dtaht> oh babel updates...
Apr 11 08:31:05 <dtaht> well, you don't have xinetd like functionality in procd yes?
Apr 11 08:31:13 * dtaht is not sure if xinetd will keep working
Apr 11 08:31:57 * dtaht thinks npt66 support is going to happen
Apr 11 08:33:13 <blogic> dtaht: we will have xinetd like functionality soon
Apr 11 08:33:22 <dtaht> I figured
Apr 11 08:33:49 <dtaht> http://pastebin.com/TuGanFvn
Apr 11 08:33:57 <dtaht> I am concerned that xinetd won't start right now
Apr 11 09:19:28 <cyrusff> dtaht: iptables has been updates, someone has to just update the Makefiles to create a package for ipv6 nat and enable those modules
Apr 11 09:19:37 <cyrusff> then you have npt66 modules
Apr 11 09:21:36 <dtaht> I grok. It's very high on my list right now
Apr 11 09:22:26 <cyrusff> that iptables update was a real PITA
Apr 11 09:22:31 <cyrusff> ;)
Apr 11 09:22:34 <conxuro> hi
Apr 11 09:27:23 <conxuro> I'm trying to add a patch to a ported library (libvirt) but when I try to compile it I have a 'ld' error again
Apr 11 09:27:59 <conxuro> here is the Makefile: http://84.88.85.59/libvirt/Makefile.txt
Apr 11 09:28:11 <conxuro> the patch: http://84.88.85.59/libvirt/000-ip_iptables_path_fix_v0_9_9.patch.txt
Apr 11 09:28:28 <conxuro> the log with the patch: http://84.88.85.59/libvirt/LIBVIRTPATCH.txt
Apr 11 09:28:41 <conxuro> the log without patches folder: http://84.88.85.59/libvirt/LIBVIRTNOPATCH.txt
Apr 11 09:29:20 <conxuro> is there any mistake in the patch?
Apr 11 09:35:44 <dtaht> cyrusff: did all the ula generation stuff go away? :(
Apr 11 10:07:55 <dtaht> aggh
Apr 11 10:36:52 <cyrusff> dtaht: no it has been moved to a uci-defaults script in base-files and there is a border rule in the default fw config
Apr 11 10:37:15 <cyrusff> The ula can also be modified through the webui
Apr 11 11:12:29 <danitool> KanjiMonster: is kexec needed for smp support?
Apr 11 11:13:26 <danitool> i got a compiling error when selected in the kernel
Apr 11 11:14:04 <KanjiMonster> danitool: no, it isn't, kexec is needed for kexec
Apr 11 11:14:32 <danitool> ok, just wanted to be sure
Apr 11 11:16:12 <danitool> now the kernel get stuck while booting: SMP: Booting CPU1...
Apr 11 11:16:36 <danitool> as you said It can't boot the second core
Apr 11 11:17:00 <KanjiMonster> which bcm63xx chips is this?
Apr 11 11:17:03 <KanjiMonster> -s
Apr 11 11:17:08 <danitool> bcm6358
Apr 11 11:17:34 <KanjiMonster> never tried bcm6358, only 6362, 6368 and 63268
Apr 11 11:17:53 <KanjiMonster> likely 6358 requires a different initialization
Apr 11 11:18:30 <danitool> sure, it does
Apr 11 11:19:23 <danitool> I'm trying some things from this code http://pastebin.com/wV3njK7c
Apr 11 11:44:56 <builder> build #245 of orion is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/245
Apr 11 11:51:28 <builder> build #208 of sibyte is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/208
Apr 11 12:19:06 <builder> build #213 of xburst is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/213
Apr 11 12:46:01 <Ginkgo> blogic: this ticket is obsolete. https://dev.openwrt.org/ticket/13320 Thanks for your efforts
Apr 11 12:46:39 <Ginkgo> Thank to Noltari too
Apr 11 15:47:32 <n3ph_laptop> hi all.. short question - to install openwrt on a routerboard its required to have an vmlinux with integrated initramfs... may it be possible to build and distribute that file on download.openwrt.org? sure there are some files out there ( http://www.ozo.com/airo/openwrt/firmware/latest/2.6/ar71xx/32376/ ) but too old to run on a rb2011uas-2hnd for example... ATM i am building my own images - it would be VERY nice to have them also in place...
Apr 11 16:05:28 <Guest99894> luka r36313 trunk/package/ boot/uboot-envtools/Makefile boot/uboot-envtools/files/cns3xxx
Apr 11 16:05:29 <Guest99894> This adds Gateworks Laguna family board support.  Note that some Laguna
Apr 11 16:05:29 <Guest99894> boards have SPI flash and others have NOR flash, thus the size/erasesize
Apr 11 16:05:29 <Guest99894> are detected dynamically.
Apr 11 16:05:30 <Guest99894> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Apr 11 17:02:45 <groz> so, how many other folks in here got the email from Ubiquity yesterday, cancelling your license to use openwrt ?
Apr 11 17:03:21 <Alam_Squeeze> ???
Apr 11 17:03:23 <Alam_Squeeze> What?
Apr 11 17:03:54 <Alam_Squeeze> email pastebin? maybe with the header?
Apr 11 17:04:17 <groz> hang on
Apr 11 17:04:22 <__trine> would I care about a license is the question
Apr 11 17:04:49 <__trine> it might be useful to wipe my arse with
Apr 11 17:05:12 <stintel> lulzwhut
Apr 11 17:05:17 <groz> http://pastebin.ca/2355959
Apr 11 17:05:25 <groz> Airos, just another openwrt derivative
Apr 11 17:07:12 <__trine> looks like the Chinese counter-fuckers are winning
Apr 11 17:07:16 <__trine> :)
Apr 11 17:07:30 <groz> I'd like to find a source for a picostation clone
Apr 11 17:07:59 <groz> if they are gonna lock them down so I can't reload with openwrt
Apr 11 17:08:15 <groz> I'd rather find something else, same package, but not locked
Apr 11 17:08:27 <__trine> yes and perhaps we could ask for modifications such as more memory
Apr 11 17:08:39 <groz> the form factor is what I like, the plastics part has more value to me than the electronics
Apr 11 17:09:16 <__trine> ubnt is a company which is doomed to go out of business I fear
Apr 11 17:09:43 <groz> I've been wondering if they are going to head down the road of trying to secure the kernel
Apr 11 17:10:03 <groz> ie, make uboot only load a ubiquity signed kernel
Apr 11 17:10:47 <__trine> groz, it would be futile in any case
Apr 11 17:11:17 <groz> it would make it difficult to reflash them
Apr 11 17:11:32 <groz> so the path of least resistance, find another source
Apr 11 17:45:14 <__trine> groz, http://code.google.com/p/firmware-mod-kit/  db90h seems to be involved in this interesting venture
Apr 11 17:47:54 <groz> seems like a lot of hoops to jump thru, when 'make menuconfig, make' produces a clean new image
Apr 11 17:48:37 <jow_laptop> the modkit is more intended for scenarios where there is no clean openwrt port or something
Apr 11 17:48:52 <jow_laptop> you can use it to repack the rootfs and add custom binaries or settings
Apr 11 17:49:04 <jow_laptop> at least thats my take on it
Apr 11 18:16:15 <builder> build #187 of iop32x is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/187
Apr 11 18:33:44 <builder> build #218 of avr32 is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/218
Apr 11 19:13:50 <__trine> the firmware-mod-kit works very well it just deconstruction a commercial image
Apr 11 19:14:21 <__trine> the firmware-mod-kit works very well it just de-constructed  a commercial image
Apr 11 19:18:38 <Guest99894> blogic r36314 trunk/target/linux/lantiq/patches-3.8/0028-NET-lantiq-adds-PHY11G-firmware-blobs.patch * [lantiq] add FE phy firmware
Apr 11 19:18:54 <Guest99894> blogic r36315 trunk/target/linux/ lantiq/xway/profiles/arv.mk lantiq/image/VG3503J.dts lantiq/image/Makefile * [lantiq] add VG3503J support
**** ENDING LOGGING AT Fri Apr 12 02:59:58 2013