**** BEGIN LOGGING AT Thu Apr 18 02:59:58 2013 Apr 18 07:21:47 build #225 of rb532 is complete: Failure [failed shell shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/225 Apr 18 07:25:56 stintel: there is no proper ipv6 support in AA (and yeah that is a known problem), you should try trunk / BB which has a somewhat stable IPv6 support with webui etc. Apr 18 07:27:52 its also included in the default builds now Apr 18 07:28:58 and it works awesome via static or pppoe Apr 18 07:29:42 build #225 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/225 Apr 18 07:31:29 stintel: if you are lucky it might work if you install the latest netifd, odhcp6c and 6relayd from trunk onto an AA-setup but I haven't tested that yet Apr 18 08:27:54 cyrusff: it's not for me, it's for everybody out there who want to run a stable release Apr 18 08:28:19 as my ISP will start with IPv6 rollout soon Apr 18 08:28:35 yeah we are a bit late on track for ipv6 Apr 18 08:29:38 but yeah no good open source ipv6 router implementations out there so we have to do everything on our own ;) Apr 18 08:30:31 well at least none that are usable on embedded stuff Apr 18 08:44:02 cyrusff: and no easy way to make it respect the lifetime ? is that the kernel or the dhcp client that does that ? Apr 18 08:45:12 its a dhcp client issue, therefore we don't use wide in trunk, also because its too bug. all the "older" clients use ioctls for configuration of the addresses and that interface doesn't support setting valid / preferred lifetimes Apr 18 08:45:20 s/bug/big/ Apr 18 08:45:56 if anyone can help with this ticket https://dev.openwrt.org/ticket/13379#ticket i have the router via serial for few good hours, thanks! Apr 18 08:49:36 cyrusff: ok, but is there an alternative in AA for dhcp-wide ? Apr 18 08:49:43 or that's the whole problem ? :) Apr 18 08:51:22 well it doesn't end there. you might patch wide to use netlink to configure addresses. but then there is the next problem that its not really usable. then there is no good way to setup RA and DHCPv6 on lan from the prefix you got from the ISP Apr 18 08:52:25 radvd can pick up addresses automatically but it doesn't do DHCPv6, dnsmasq < 2.66 doesn't pickup addresses when acting as a RA/DHCPv6 server and has some nasty bugs Apr 18 08:52:41 so IPv6 on AA is really meh. Apr 18 08:52:41 well, everything is working fine on the AA device here on the cable modem that has native v6 enabled, I am behind that device and get v6 address and route Apr 18 08:52:45 so it *works* Apr 18 08:52:53 but the lifetime is a problem Apr 18 08:53:02 do you use wide / radvd? Apr 18 08:53:04 ok, thanks for all the info Apr 18 08:53:12 this device is yes Apr 18 08:53:18 ok Apr 18 08:53:57 at home I don't have native yet, that's BB, he.net 6in4, announce via BIRD Apr 18 08:54:10 not sure if I configured dnsmasq to hand out v6 DNS server addresses Apr 18 08:54:30 and my cmts will be the last one of them all where they will active v6 Apr 18 08:54:32 FML! :( Apr 18 08:54:42 activate* Apr 18 08:54:56 don't worry my isp couldn't even tell me when they will support IPOv6 Apr 18 08:55:13 cyrusff, i remember wide-dhcp server worked well with radvd and pppoe with a /64 pd Apr 18 08:55:40 nov 2011 - until BB was out Apr 18 08:56:02 dape8708: yes but it has these problems, you don't have a dhcpv6-server etc. Apr 18 08:56:12 it works 90% of the time though Apr 18 08:56:50 stintel: anyway we will have DHCPv6-PD server support in the next month and it will neatly integrate with the rest of the stuff, so most people won't need BIRD and / or dnsmasq or any other stuff to delegate IPv6 at home Apr 18 08:57:12 * dape8708 drulls Apr 18 08:57:22 cyrusff: that's good to hear Apr 18 08:57:44 and would be nice if BB came out rather soon after AA ;) Apr 18 08:57:53 or is it drool? bb works so good for me on ipv6 Apr 18 08:59:15 stintel: i can't promise anything about a BB release, however as the ipv6 stuff is mainly userland-related it might be possible to release a kind of packet feed with backports for netifd and the ipv6 tools Apr 18 08:59:52 but i'm relatively busy atm and want to finish the most important feature for BB and get them tested a bit before thinking about something like that Apr 18 09:00:06 /s/feature/ipv6 features/ Apr 18 09:00:12 right, in 2 months I can test it at home Apr 18 09:00:21 if I get my hands on another device, I can test it here too Apr 18 09:00:36 I don't want to break this current working AA setup :) Apr 18 09:00:41 colleagues won't like it Apr 18 09:00:46 haha Apr 18 09:00:51 but they might have a wndr3700 around Apr 18 09:01:05 + spare Apr 18 10:04:31 build #252 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/252 Apr 18 10:11:12 build #215 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/215 Apr 18 10:14:08 build #220 of xburst is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/220 Apr 18 11:26:07 build #217 of ixp4xx is complete: Failure [failed shell_7] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/217 Apr 18 12:05:32 nbd r36355 trunk/toolchain/gcc/ Config.in Config.version * toolchain: get rid of gcc kconfig symbol overloading Apr 18 12:05:39 nbd r36356 trunk/toolchain/ uClibc/Config.version uClibc/Config.in * toolchain: get rid of uclibc version kconfig symbol overloading Apr 18 12:05:45 nbd r36357 packages/ (6 files in 6 dirs) * packages: consistently use 'depends on' instead of 'depends' Apr 18 12:05:46 nbd r36358 trunk/toolchain/ eglibc/Config.in eglibc/Config.version * toolchain: get rid of eglibc version kconfig symbol overloading Apr 18 12:05:53 nbd r36359 trunk/toolchain/ musl/Config.in musl/Config.version * toolchain: get rid of musl version kconfig symbol overloading Apr 18 12:05:59 nbd r36360 trunk/toolchain/Config.in * toolchain: get rid of libc implementation symbol overloading Apr 18 12:06:07 nbd r36361 trunk/ (36 files in 4 dirs) * build: add new menuconfig code based on linux 3.9 Apr 18 12:35:36 where can I find the AA jffs2 lzma compressor patch ? Apr 18 12:43:00 cyrusff: is there some kind of roadmap somewhere for the planned IPv6 work in BB ? Apr 18 13:22:48 build #211 of ar71xx is complete: Failure [failed shell_10 compile_1] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/211 Apr 18 13:45:54 build #213 of au1000 is complete: Failure [failed shell_10 compile_1] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/213 Apr 18 13:52:07 nbd r36362 trunk/include/toplevel.mk * build: fix make defconfig Apr 18 14:08:18 stintel: well in my head ;) the next big thing is the dhcpv6-pd server (which will hopefully be finished next month) then most of the stuff I like to see is actually done. what isn't covered yet is multicast handling / proxying but that is more or less a longer-term goal. and well let's see what people like to see. Apr 18 14:08:39 stintel: if you have some input, please let me know Apr 18 14:09:31 build #196 of ep93xx is complete: Failure [failed shell_10 compile_1] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/196 Apr 18 14:12:07 cyrusff: ok thanks again for the info Apr 18 14:12:27 sure, do you think anything big is missing? Apr 18 14:12:45 well no idea for my current setup everything is working :P Apr 18 14:12:49 hehe Apr 18 14:13:45 well maybe at some point someone could update dnsmasq to 2.66 and maybe get that integrated for people that want stateful dhcpv6 for some reason but yeah its more of a nice to have and not really necessary from my point Apr 18 15:41:07 I just upgraded to r36362 and now trying 'make meuconfig' gives error messages as shown here (http://dpaste.com/1063543/). Apr 18 15:44:30 a few hours ago nbd committed some updates for config Apr 18 15:44:46 "add new menuconfig code based on linux 3.9" Apr 18 15:44:56 so I imagine you need a dirclean or at least a clean first. Apr 18 15:45:31 mazilo: you need to update your packages feed Apr 18 16:04:11 build #194 of iop32x is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/194 Apr 18 16:04:12 build #184 of mpc52xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/184 Apr 18 16:11:37 <_trine> theres something wrong with make menuconfig Apr 18 16:11:58 <_trine> when I execute it it returns msny of these Apr 18 16:12:03 <_trine> many* Apr 18 16:12:09 <_trine> tmp/.config-target.in:6778: invalid option Apr 18 16:12:09 <_trine> tmp/.config-target.in:6813: syntax error Apr 18 16:12:51 <_trine> I have done a make clean and some of the other stuff such as make defconfig etc Apr 18 16:14:03 _trine config just got update - you need to do dirclean or new tree IIRC Apr 18 16:14:27 that is menuconfig (the version of config it's based on) got updated Apr 18 16:14:37 <_trine> oh thanks cshore Apr 18 16:19:31 <_trine> I had to do a distclean Apr 18 16:31:06 <_trine> I miss being able to traverse backwards in menuconfig with the esc key Apr 18 16:31:31 <_trine> I cann see the E key but I like esc Apr 18 16:36:16 <_trine> esc does work but you have to keep it presses for quite a while >> odd Apr 18 16:36:22 <_trine> pressed* Apr 18 16:39:25 build #225 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/225 Apr 18 16:40:26 I did a 'make clean' as well as 'make dirclean' and the problem persists. :( Apr 18 16:40:55 If I do a 'make distclean', then it will clean all my env builds. Apr 18 16:50:33 I also did a 'scripts/feeds update -a', 'scripts/feeds update -i', 'scripts/feeds install -a', and still ended up with the same error messages. Apr 18 16:58:03 Anyone can help? Apr 18 17:10:03 mazilo, KanjiMonster said something about you needing to update your feeds (probably which feeds you use actually, there has been a change to the telephony stuff) Apr 18 17:10:37 it's now in a separate feed Apr 18 17:11:31 also you need to backup your env and do distclean (changes to config have also happened) Apr 18 17:11:44 that is the programs used for menuconfig Apr 18 17:28:20 build #266 of brcm63xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/266 Apr 18 17:28:22 build #253 of brcm47xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/brcm47xx/builds/253 Apr 18 17:28:24 build #250 of atheros is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/250 Apr 18 17:28:26 build #241 of cobalt is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/241 Apr 18 17:28:27 build #253 of orion is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/253 Apr 18 17:28:29 build #244 of lantiq is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/244 Apr 18 17:28:31 build #242 of ramips is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/242 Apr 18 17:28:33 build #243 of ppc40x is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/243 Apr 18 17:28:34 build #226 of rb532 is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/226 Apr 18 17:28:36 build #226 of ppc44x is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/226 Apr 18 17:28:38 build #237 of uml is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/237 Apr 18 17:28:40 build #231 of x86 is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/x86/builds/231 Apr 18 17:28:41 build #230 of ar7 is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/230 Apr 18 17:28:43 build #216 of sibyte is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/216 Apr 18 17:28:45 build #226 of avr32 is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/226 Apr 18 17:28:47 build #221 of xburst is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/221 Apr 18 17:28:49 build #219 of ixp4xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/219 Apr 18 17:28:51 build #219 of kirkwood is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/219 Apr 18 17:28:53 build #212 of ar71xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/212 Apr 18 17:28:55 build #214 of au1000 is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/au1000/builds/214 Apr 18 17:28:56 build #195 of iop32x is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/195 Apr 18 17:28:58 build #197 of ep93xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/197 Apr 18 17:28:59 build #190 of gemini is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/190 Apr 18 17:29:01 build #196 of mcs814x is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/196 Apr 18 17:29:03 build #200 of adm5120 is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/200 Apr 18 17:29:05 build #185 of mpc52xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/185 Apr 18 17:29:06 build #173 of octeon is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/173 Apr 18 17:29:08 build #8 of mpc85xx is complete: Exception [exception svn shell shell_19 compile_10] Build details are at http://buildbot.openwrt.org:8010/builders/mpc85xx/builds/8 Apr 18 18:27:02 build #264 of brcm63xx is complete: Exception [exception shell_7 shell_16 upload] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/264 Apr 18 18:30:52 mazilo: about the menuconfig trouble, you need to update the packages feeds as well Apr 18 18:33:56 <_trine> gee I hugely dislike the new menuconfig Apr 18 18:37:54 <_trine> nbd menuconfig needs looking at Apr 18 18:38:11 <_trine> its hard to use now Apr 18 18:38:21 <_trine> a pain in the butt Apr 18 18:38:49 _trine: how so? Apr 18 18:38:55 <_trine> well Apr 18 18:39:40 <_trine> when I am using it I used to be able to traverse backwards out of menus with a quick press of the esc key Apr 18 18:40:02 oh, i never used that Apr 18 18:40:05 didn't know about it Apr 18 18:40:09 i use Apr 18 18:40:13 which is fast as well Apr 18 18:40:14 <_trine> now when I use the esc key to do that it does not work until its been pressed for a while Apr 18 18:40:50 <_trine> and often this guess at how long to hold the esc key down is too long or too short Apr 18 18:41:00 it's not about holding it Apr 18 18:41:02 <_trine> if its too short it does not work Apr 18 18:41:08 press it twice Apr 18 18:41:13 without holding it Apr 18 18:41:20 <_trine> if its too long it sometimes exits entirley Apr 18 18:41:49 <_trine> pressing it twice does not work either Apr 18 18:42:10 here it does Apr 18 18:42:16 <_trine> it always work fine before Apr 18 18:42:37 <_trine> sometimes it does work Apr 18 18:42:54 not sure if it's easy to add back Apr 18 18:43:04 i suggest you change your habit to Apr 18 18:43:20 <_trine> the esc key is a bit hit and miss now Apr 18 18:43:28 works fine here, and on my old checkout it is , too Apr 18 18:44:06 <_trine> esc esc works here too but not all the time Apr 18 18:44:31 <_trine> any way I will adopt a new habit Apr 18 18:44:40 it has yet to fail for me Apr 18 18:45:03 switching to the new menuconfig was important because of all the weird quirks and bugs in the old one Apr 18 18:45:14 and i'd like to keep the changes between it and the kernel menuconfig as small as possible Apr 18 18:45:36 <_trine> dont worry i will manage Apr 18 18:46:12 <_trine> nothing another glass of wine wont cure :) Apr 18 18:47:42 <_trine> while your here Apr 18 18:48:33 * nbd isn't actually here, nbd is in denmark on the 'battlemesh' event Apr 18 18:48:43 ;) Apr 18 18:48:44 <_trine> I dont know if I am imagining it but when I have wifi enabled on my wndr3700 the router is loosing the net connection and it does seem only to be when I have wifi up Apr 18 18:49:24 <_trine> BARRIER BREAKER (Bleeding Edge, r36297) Apr 18 18:49:30 what do you mean by 'loosing the net connection'? Apr 18 18:49:35 <_trine> its a bit old now though Apr 18 18:51:02 <_trine> nbd I am not exactly sure what is happening exactly because I have not done any tests (I have been very busy selling some of my houses) but I have noticed when wifi is up frequently i loose IRC Apr 18 18:51:27 <_trine> but when wifi is down it never happens Apr 18 18:51:57 <_trine> thats all I know Apr 18 18:52:55 <_trine> what do you do at a 'battlemesh' event Apr 18 18:53:15 <_trine> apart from drinking beer :P Apr 18 18:55:08 talking to people, hacking, testing wifi stuff, generally just having a good time Apr 18 18:55:44 <_trine> It sounds like something I would like to do sometime Apr 18 18:56:51 we have interesting people from all over the world here Apr 18 18:57:04 europe, US, argentinia, ... Apr 18 18:58:17 <_trine> what do you do about accommodation ? Apr 18 18:58:30 we're almost all in the same hotel Apr 18 18:58:41 and meet up at the university in aalborg to hack and do stuff Apr 18 18:59:18 i was in spain when the battlemesh happened this year. I really wanted to go over. Apr 18 18:59:34 maybe next year Apr 18 18:59:43 <_trine> I am thinking about moving house to one with more land and when I have done that I will buy a big RV Apr 18 19:00:13 <_trine> I had a big RV a few years ago and enjoyed it immensely Apr 18 19:00:33 <_trine> I was in Europe with it for a while Apr 18 19:00:36 <_trine> touring Apr 18 19:01:16 <_trine> but my wife became ill with MS and we had to come home but I always said I would go back and do it all again Apr 18 19:01:37 <_trine> and now she is retiring from work so maybe this is the time Apr 18 19:09:59 is there any required affiliation to go to the battlemesh? Or just show up with beer? Apr 18 19:10:29 register in time for the full package with accomodation, food, etc. and then show up Apr 18 19:10:49 cool. Apr 18 19:11:38 <_trine> it should be part of the topic for the next time Apr 18 19:12:16 i know the olsr guys go too. Apr 18 19:12:47 Is there a way to fix these error messages as shown here (http://dpaste.com/1063543/) caused by 'make menuconfig' without a 'make distclean'? I tried 'make clean' as well as 'make dirclean' and ended up with the same error message even though after a 'scripts/feeds update -a'. Apr 18 19:13:37 m -rf tmp Apr 18 19:13:39 rm -rf tmp Apr 18 19:13:41 <_trine> mazilo, I did a distclean Apr 18 19:14:36 nbd: I tried 'rm -rf tmp', too and ended up with the same problem. Apr 18 19:14:57 _trine: I tried to stay away from 'make distclean' because it will erase all my build environments. Apr 18 19:15:05 odd Apr 18 19:15:20 <_trine> mazilo, save your .config Apr 18 19:15:32 <_trine> and paste it back afterwards Apr 18 19:16:01 nbd: Right now, I am doing a 'make tools/compile' to get all the tools updated. Apr 18 19:16:55 _trine: 'make distclean' will remove all my build environments that consist of at least 5 platforms. Apr 18 19:17:39 <_trine> well I have a different folder for each one disk space is cheap Apr 18 19:17:53 _trine: This means, I have to manually change each environment and save all the local files. Then, do a 'make distclean' and restore all the environments. Apr 18 19:20:13 nbd: http://dpaste.com/1063792/ Apr 18 19:23:16 are you sure the feed update worked? because i did commit a fix for this a few hours ago in the packages repo Apr 18 19:32:27 nbd: I did 'scritps/feeds update -a', 'scripts/feeds update -i', 'scripts/feeds install -a', and same problems. I also did 'svn up' and same problem. Apr 18 19:33:56 mazilo: and you are using the trunk packages feed and not a 12.09 feed or something like that? (just to be sure) Apr 18 19:35:52 nbd: I believe so (http://dpaste.com/1063806) Apr 18 19:51:18 mazilo: what does svn info say for feeds/packages/ ? Apr 18 19:54:46 build #218 of ixp4xx is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/218 Apr 18 20:06:44 * _rmk_ wonders if he'll finally find some time tonight to attack the draytek again Apr 18 20:17:44 trine, where are you located ? Apr 18 20:18:00 <_trine> UK Apr 18 20:18:05 my wife got a new job this week, so we have to move, and are thinking about buying place with a little land Apr 18 20:18:37 gotta sell the house here, buy another about 200km up island from here Apr 18 20:18:49 <_trine> I sold what I wanted to this week Apr 18 20:19:23 <_trine> where are you Apr 18 20:19:38 west coast of canada, vancouver island Apr 18 20:19:55 we just got confirmation of the new job on Tuesday Apr 18 20:20:08 so, just starting to figure out the move, she starts on June 1 Apr 18 20:20:30 <_trine> its a lot of work buying and selling Apr 18 20:20:57 uh huh, saw your comments about touring in the rv, we've got a small one, try spend a good chunk of the summer out and about with it Apr 18 20:21:26 <_trine> my wife keeps saying she would like to have an RV in Canada Apr 18 20:21:37 we have a roadtrek 190 Apr 18 20:21:38 <_trine> my brother is Canadian Apr 18 20:21:51 very comfy for two folks, and, small enough it can park anywhere Apr 18 20:22:47 <_trine> I had a 5 birth RV a few years ago I enjoyed it and I also had a jet ski we used to tow behind it Apr 18 20:22:57 <_trine> great fun Apr 18 20:23:05 hehe, we are a little more modest, ours sleeps 2 Apr 18 20:23:17 <_trine> and not forgetting the best part my old friend my dog Apr 18 20:23:19 but, kids are all grown up and moved out, so, that's enough for us Apr 18 20:23:48 is actually better, because, since it only sleeps two, no option to invite kids along Apr 18 20:23:53 <_trine> I would like a new RV and a new dog Apr 18 20:25:12 <_trine> it broke my heart when my dog died but its been quite a while now so I guess I could love another one :) Apr 18 20:25:47 we don't have any pets anymore, cat died about the same time last of the kids left Apr 18 20:26:04 so, we decided no more, makes it easier to travel on short notice Apr 18 20:27:29 <_trine> well at the moment we still frequently travel out of the country so it's not quite the right time for another dog Apr 18 20:32:35 <_trine> mazilo, my dockstar compile completed OK with all of the FreeSwitch modules Apr 18 20:45:42 KanjiMonster: Sorry I was on a phone call. As with the feeds/packages, I have no idea. Apr 18 20:46:16 _trine: Great. I haven't done anything with FS lately. I have been playing around with my dockstart router. Apr 18 20:46:56 <_trine> URL: svn://svn.openwrt.org/openwrt/trunk Apr 18 20:46:56 <_trine> Repository Root: svn://svn.openwrt.org/openwrt Apr 18 20:46:56 <_trine> Repository UUID: 3c298f89-4303-0410-b956-a3cf2f4a3e73 Apr 18 20:47:02 <_trine> is yours the same Apr 18 20:47:35 mazilo: I'm asking for the output of 'svn info' in the directory feeds/packages Apr 18 20:48:02 _trine: The firewall issue I encoutered seemed to be related to IPv6. So, I removed the IPv6 protocol along with its dependecies and now the firewal on my dockstar and/or Netgear WGT634U routers work without a problem. Apr 18 20:48:07 ah wait, packages recently switched to git Apr 18 20:48:48 ah, no it didn't Apr 18 20:49:07 mazilo: so please, the output of svn info of feeds/packages :) Apr 18 20:49:32 KanjiMonster: Here (http://dpaste.com/1063886) is the 'svn info' output from feeds/packages directory. Apr 18 20:50:19 mazilo: so your feeds checkout it quite outdated Apr 18 20:50:47 ah, can't read Apr 18 20:51:00 no it isn't, looks normal Apr 18 20:51:31 eh, wrong paste Apr 18 20:51:52 KanjiMonster: I have feeds.conf and feeds.conf.defaults files. Which one is the correct one? Apr 18 20:51:53 mazilo: your feeds are ~2000 commits behind Apr 18 20:52:34 KanjiMonster: I just did a 'scripts/feeds update -a' about an hour ago. Apr 18 20:52:42 mazilo: feeds.conf overrides feeds.conf.default Apr 18 20:53:18 mazilo: then it didn't update it, try doing a svn update in feeds/packages Apr 18 20:53:29 and see what it says Apr 18 20:54:24 KanjiMonster: I thinkg feeds.conf I have is the culprit. Let me move it some where and do it all again to see if that will resolve the issue. Apr 18 20:56:23 BRB in a few minutes. Apr 18 21:08:48 KanjiMonster: 'svn up' in feeds/packages is talking so long time and is still doing it. Apr 18 21:09:57 BBL in 30 minutes to report back. Apr 18 21:26:35 KanjiMonster: 'svn up' in feeds/packages is still doing it. Should I abort it? Apr 18 21:26:49 mazilo: probably Apr 18 21:26:58 sounds there's something broken Apr 18 21:27:06 OK. Apr 18 21:27:47 if you don't have anything valuable, try a fresh checkout of packages Apr 18 21:28:19 I will try to manually update each subdir in feeds/packages and see what happens. Apr 18 21:29:52 I assume the .svn got borked somehow, so I suggest to just checkout packages/ completely again Apr 18 21:44:12 KanjiMonster: http://dpaste.com/1063968 Does it mean I can remove the feeds/packages/net/bmx6 ? Apr 18 21:44:39 yes Apr 18 21:44:51 bmx6 is in its own feed now Apr 18 21:44:58 OK. Apr 18 21:46:28 feeds/packages/net is the one that gives the problem. So, now I wrote a simple scripts to go through each subdir to perform an 'svn up' to find out which package it will get stuck. Apr 18 21:48:34 KanjiMonster: What is the proper way to update my local SVN trunk? I usually do 'svn up; make package/symlinks'. The later seems to call 'scripts/feeds update -a; scripts/install -a'. Apr 18 21:49:33 mazilo: sounds about right Apr 18 21:50:28 KanjiMonster: I do that on a daily basis and why my feeds/packages were all outdated? Apr 18 21:50:59 mazilo: no idea. it looks like your feeds checkout got corrupted, that's why update did not update it properly Apr 18 21:51:16 *packages checkout Apr 18 21:51:20 <_trine> why do make package/symlinks' why dont you just do ./scripts/feeds update -a and scripts/feeds install -a Apr 18 21:52:28 _trine: If you take a peek at /Makefile, 'package/symlinks' calls both 'scripts/feeds update -a' and 'scripts/feeds install -a' Apr 18 21:52:54 <_trine> yes it might do Apr 18 21:53:06 <_trine> but I always do it manually Apr 18 21:54:21 <_trine> I prefer the kiss approach Apr 18 21:55:09 KanjiMonster: I finally did update feeds/packages. However, when I tried (cd feeds/packages/net; svn up), it gets stuck again. Apr 18 21:56:28 <_trine> mazilo, you have been at this all night surely it would be easier to do a distclean Apr 18 21:57:00 or just rm -rf feeds/packages; ./scripts/feeds update -a Apr 18 21:59:42 KanjiMonster: If I need to modify any package, what is the proper way to do this so that when I do an 'svn up', it won't cause conflict? Apr 18 22:00:34 mazilo: there is no way to avoid a conflict if the package gets modified by somebody else Apr 18 22:00:45 KanjiMonster: OK. Apr 18 22:08:34 build #189 of gemini is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/gemini/builds/189 Apr 18 22:20:54 KanjiMonster: Now, my feeds/packages looks updated (http://dpaste.com/1064014). I just did a 'make dirclean;make menuconfig' and here (http://dpaste.com/1064019) is the output or error messages. Apr 18 22:21:38 mazilo: rm -rf tmp Apr 18 22:22:02 KanjiMonster: Already did by 'make dirclean' as shown on the link. Apr 18 22:24:28 BBL. Apr 18 22:24:32 mazilo: what's the content of tmp/.config-package.in:20314? Apr 18 22:24:52 do you have any local changes? Apr 18 23:06:02 KanjiMonster: Sorry, I had to go for a while and am back now. Apparently, those errors were from my local packages and I have them fixed. Now, 'make menuconfig' is working. Thank you very much. **** ENDING LOGGING AT Fri Apr 19 02:59:58 2013