**** BEGIN LOGGING AT Sat Jul 27 02:59:58 2013 Jul 27 05:34:48 build #321 of cobalt is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/cobalt/builds/321 Jul 27 06:22:23 Weedy: a very interesting derpy style Jul 27 06:42:11 yes Jul 27 06:44:20 can oyu add a bug report in trac for it ? Jul 27 06:53:12 https://dev.openwrt.org/query?status=!closed&keywords=~derp Jul 27 06:53:16 best new tag Jul 27 07:57:28 blogic: when i run attach to logread with gdbserver and set a break at log_notify and then run "logger test 1 2 3", i never get to the break point. after i /etc/init.d/log restart and reattach gdbserver, i do reach the breakpoint. fwiw. Jul 27 08:01:49 nfds is -1 in uloop_fetch_events() Jul 27 08:11:42 blogic: ping Jul 27 08:38:54 A colleague has suggested to use tcpdump on the target to see what was going on at network level, and it reports to me "IP truncated-ip - 4 bytes missing! Jul 27 08:39:46 weird Jul 27 08:40:11 did you setup vlans on the interfaces ? Jul 27 08:40:30 hmmm Jul 27 08:40:36 maybe the bootloader does domething crazy Jul 27 08:41:55 looks like the special tag is not disbaled or similar Jul 27 08:42:00 what bootloader do you use ? Jul 27 08:45:59 u-boot Jul 27 08:46:29 from the VR9 tree of Daniel Schwierzeck Jul 27 08:47:01 arp traffic is OK, just like the tftpboot Jul 27 08:47:54 I also tried connecting from an usb adapter and another laptop, all same issue Jul 27 09:01:14 have you tried with the original bootlaoder ? Jul 27 09:14:27 no, not yet Jul 27 09:15:27 going offline because of bad weather :S Jul 27 09:15:58 I will try it later Jul 27 09:23:21 blogic r37562 trunk/ (13 files in 7 dirs) * strict_strtoul is obsolete, use kstrtoul instead Jul 27 09:23:27 blogic r37563 trunk/target/linux/ (13 files) * ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems Jul 27 09:23:31 blogic r37564 trunk/target/linux/ramips/rt305x/config-3.10 * ramips: enable usb phy support on rt5350 Jul 27 09:23:36 blogic r37565 trunk/target/linux/ramips/dts/MPRA2.dts * ramips: MPR-A2 should use memory auto detection Jul 27 09:23:43 blogic r37566 trunk/target/linux/ ramips/modules.mk ramips/patches-3.10/0202-owrt-USB-adds-dwc_otg.patch * ramips: add back dwc_otg driver Jul 27 09:23:48 blogic r37567 trunk/target/linux/ramips/patches-3.10/0023-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch * ralink: gpio driver should not set gpio to input when irq is querired Jul 27 09:23:54 blogic r37568 trunk/target/linux/ (10 files in 9 dirs) * ramips: add MPR-A1 support Jul 27 09:50:47 russell---: can you issue "info variables" in both the broken and working cases Jul 27 09:53:30 jow_laptop: is there a convenient way to capture the output to a file? Jul 27 09:53:44 (crapton of output) Jul 27 09:54:01 try Jul 27 09:54:06 set logging on Jul 27 09:54:11 set logging file /tmp/output Jul 27 09:54:26 ah, cool (gdb skills rusty) Jul 27 09:54:26 then rerun the info command Jul 27 09:54:31 right Jul 27 10:00:19 http://iris.personaltelco.net/~russell/variables-boot Jul 27 10:00:32 http://iris.personaltelco.net/~russell/variables-restart Jul 27 10:02:07 okay, that does not dump the contents Jul 27 10:02:18 however it would be useful to compare all variables from logread.c Jul 27 10:02:24 it feels like logread isn't finding the syslog source, maybe it isn't available in ubus land when logread is starting up (haven't waded through all that ubus/ubox stuff) Jul 27 10:03:18 e.g. p *log_event; p *events etc. Jul 27 10:07:02 right, standby Jul 27 10:08:43 need to run, will check in later Jul 27 10:32:12 jow_laptop: just variables from logread.c ... Jul 27 10:32:20 http://iris.personaltelco.net/~russell/logread-print-boot Jul 27 10:32:23 http://iris.personaltelco.net/~russell/logread-print-restart Jul 27 10:32:29 * russell--- has to hit hay Jul 27 11:21:45 build #300 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/300 Jul 27 11:25:12 build #300 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/300 Jul 27 11:53:33 Flashed back the original firmware, now I have to break the firmware checks or I need an application to do a xmodem download Jul 27 11:53:43 so that will be later Jul 27 12:16:54 build #314 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/314 Jul 27 14:04:18 build #333 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/333 Jul 27 14:06:16 build #284 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/284 Jul 27 16:01:37 hi all i have a question to the huawei e970 why isn't it included in the buildroot in trunk ? I saw here http://patchwork.openwrt.org/patch/3170/ that somebody provided the patch for it Jul 27 18:13:30 * m4t hit an internal compiler error with mips16 Jul 27 18:16:18 its been working fine on another device, ive got more packages selected on my rspro though Jul 27 18:16:42 it's gdb, fwiw. Jul 27 18:17:31 http://pastebin.com/raw.php?i=mXC0P8N0 Jul 27 21:13:59 jow_laptop: any other thoughts on logread gdb debugging? Jul 27 21:19:56 build #294 of avr32 is complete: Failure [failed compile_9] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/294 Jul 27 21:25:10 build #255 of mcs814x is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/255 Jul 27 23:43:50 build #241 of mpc52xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/241 Jul 28 02:32:15 build #286 of xburst is complete: Failure [failed compile_9] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/286 **** ENDING LOGGING AT Sun Jul 28 02:59:58 2013