**** BEGIN LOGGING AT Sun Aug 11 02:59:58 2013 Aug 11 08:00:08 build #347 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/347 Aug 11 09:15:18 blogic: I have found why my storage wasn't detected.. I have burned the 'squashfs-image', but that contains the image AND the squashfs... so I just need root.squashfs Aug 11 09:16:15 hi. i'd like to submit very little patch for ddns package, but i'm usually using web-based mail clients, like gmail. is it acceptable to send mail with patch from gmail? i'm not sure if it sends plain text messages. Aug 11 09:19:57 nxis: https://dev.openwrt.org/wiki/SubmittingPatches Aug 11 09:24:27 yes, i've read it Aug 11 09:25:07 it says only plain text. i just do not know if gmail sending plain text or not. Aug 11 09:25:34 and which are preferred mail clients Aug 11 09:25:56 dont send it via gmail web interface, it will mess up the patch Aug 11 09:26:11 i use mutt, but you could also send patches via git Aug 11 09:27:35 thanks Aug 11 12:05:41 blogic: victory ;) my storage is correct now... configured my linux partition at the first, so the squashfs partition is automatically placed there, and the rootfs_data is configured to be at the second flash Aug 11 12:05:56 * at the first flash Aug 11 12:06:25 is there supposed to be a web page to configure the device? Aug 11 12:06:42 tcpdump shows normal output now, but it doesnt respond to 192.168.1.1 Aug 11 12:06:52 on openwrt? only if you install luci Aug 11 12:07:01 I have to configure that myself? Aug 11 12:07:39 is that done in the menuconfig? Aug 11 12:09:01 you can install it with opkg I guess Aug 11 12:09:13 opkg update; opkg install luci Aug 11 12:09:43 but if you know yourself around cli, use cli Aug 11 12:29:34 Devastator: openwrt configuration is new to me, so I guess i prefer the web interface... Aug 11 13:06:01 Weird, I configured my partition as read-only, apparently it is modified anyways.. Aug 11 13:59:09 build #315 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/315 Aug 11 14:00:24 The_Lizard basically, all configuration files are in /etc/config/ Aug 11 14:01:27 The_Lizard IIRC, rootfs is rw in openwrt, in opposite to dd-wrt which is always read-only, but I don't know if you can force a read-only in openwrt Aug 11 14:02:50 build #315 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/315 Aug 11 14:58:13 build #299 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/299 Aug 11 15:10:57 luka r37752 trunk/target/linux/ imx6/patches-3.10/0004-ARM-dts-imx6sl-imx6qdl-use-the-same-SDMA-firmware.patch imx6/patches-3.10/0003-usb-chipidea-enable-to-build-host-support-as-module.patch imx6/patches-3.10/101-sdma.patch * imx6: fix sdma Aug 11 15:10:59 luka r37753 trunk/package/kernel/ imx imx/imx-sdma-fw imx/imx-sdma-fw/Makefile * kernel: add imx-sdma-fw package Aug 11 15:11:00 luka r37754 trunk/target/linux/imx6/Makefile * imx6: use kmod-imx-sdma-fw-imx6 by default Aug 11 15:21:29 build #329 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/329 Aug 11 15:37:47 build #348 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/348 Aug 11 17:05:00 Which i must do to refresh the patches? Aug 11 17:06:24 mus i* Aug 11 17:06:30 must i* Aug 11 17:08:09 build #309 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/309 Aug 11 17:24:22 Which must i do to refresh patches? Aug 11 17:26:46 make target/refresh Aug 11 17:28:30 updated openwrt/upstream, https://home.comcast.net/~sdwalker/uscan/index.html Aug 11 17:29:41 thanks blogic Aug 11 17:49:44 [florian]: hey Aug 11 17:49:48 [florian]: i sent my patches Aug 11 17:49:55 [florian]: could you take a look at them, please? Aug 11 17:50:03 [florian]: do they look OK to you? Aug 11 17:50:15 [florian]: unfortunately it didn't boost net performance :( Aug 11 17:54:53 zajec__: one ping is enough Aug 11 18:38:08 Pteridium, I have configured an linux partition and a rootfs_data partition, I assumed that the kernel and rootfs parts are read-only by design (for the failsafe), and when the rootfs_data partition starts at the second flash, the checksum at the first flash would still be OK Aug 11 18:40:05 The_Lizard: Congratulations! Aug 11 18:41:26 rootfs_data only in the second flash chip? Aug 11 18:41:43 good solution Aug 11 18:43:00 but apparently it didn't work... Aug 11 18:43:21 brn-boot failed upon the second boot Aug 11 18:43:45 bad news... :( Aug 11 18:44:08 im dumping the first flash now, to see what has changed Aug 11 18:44:23 brn-boot is your headache Aug 11 18:44:26 otherwise im going to patch out that check as well ;) Aug 11 18:44:36 I already patched out 2 ;) Aug 11 18:45:51 using u-boot as the first bootloader is not a good option? Aug 11 18:47:59 I did, but it corrupted my network (missing 4 bytes) Aug 11 18:49:52 then i suppose you are using it as second stage bootlader, no? Aug 11 18:49:58 no Aug 11 18:51:15 are you booting openwrt against brn-boot? Very brave! Aug 11 18:52:10 Im not 'blocked' by any knowledge, so I have no idea about pro's or con's Aug 11 18:52:39 I figured that brn-boot should set-up my hardware, and the rest should follow ;) Aug 11 18:52:59 no, blogic asked if the network data was corrupted with brn-boot as well... Aug 11 18:53:48 but with brn-boot you haven't problems, no? Aug 11 18:58:03 there is a very old patch for brn-boot, but you need to ask blogic if it could help or if you must forgot it: http://comments.gmane.org/gmane.comp.embedded.openwrt.devel/12708 Aug 11 18:58:23 forget* Aug 11 18:58:48 surely you must forgot it Aug 11 19:00:07 :D Aug 11 19:02:51 The_Lizard: don't loose your time with this patch; is very old Aug 11 19:05:41 these are already patched in... Aug 11 19:05:50 I added the arguments for them in my boot ;) Aug 11 19:06:06 The_Lizard, Aug 11 19:06:14 did you fix the header issue? Aug 11 19:06:25 not yet, didn't dive into it yet Aug 11 19:06:37 hmmmmm Aug 11 19:06:44 dive... xD Aug 11 19:06:45 the undoc_upgrade.stm also checks the image... Aug 11 19:07:02 wooshhhhh splash. :-D Aug 11 19:07:05 How well is you disassembly ;) Aug 11 19:07:18 mine? Aug 11 19:07:22 learning. Aug 11 19:07:28 chapter 1. :-D Aug 11 19:07:42 cool.. I'm just messing around with IDA... Aug 11 19:07:50 aah Aug 11 19:07:52 and it is working pretty well... Aug 11 19:17:53 lets see if i'm able to patch out the crc32 check upon startup ;) Aug 11 19:18:14 but I can only test out tomorrow, as im dumping my flash for reference (takes 5 hours) Aug 11 19:36:21 Pteridium: ? what do you mean by one ping? Aug 11 19:37:16 this is a ping: zajec__ Aug 11 19:38:21 Pteridium: i'm just using it to point who I'm talking to exactly in a given message Aug 11 19:38:40 never heard about anyone complaining about sth so trivial... ) Aug 11 19:38:41 ;) Aug 11 19:40:07 for some people is irritating Aug 11 19:43:37 KanjiMonter: if you have a moment, can you take a look at this mail? https://lists.openwrt.org/pipermail/openwrt-devel/2013-August/021002.html Aug 11 19:43:47 i'm a bit hopeless Aug 11 19:44:33 KanjiMonster: if you have a moment* Aug 11 20:22:03 dumped almost 3 MB now... Aug 11 20:22:56 shit? Aug 11 20:22:59 xD Aug 11 20:23:10 ?? Aug 11 20:23:27 never mind. Aug 11 20:23:31 joking. Aug 11 20:26:50 I think I have found the code to patch out to make any image boot ;) Aug 11 20:27:17 device? Aug 11 20:27:22 vgv7519 Aug 11 20:27:27 Arcadyan (lantiq) Aug 11 20:27:36 aah Aug 11 20:27:40 code from the brn-boot ;) Aug 11 20:27:54 great, good going. Aug 11 20:28:23 build #296 of kirkwood is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/kirkwood/builds/296 Aug 11 21:31:55 is there any blocking against patches on the mailing list? I'm asking because I tried to send one with git send-email, the copy I received from myself is fine, but the one I received from the mailing list is blank Aug 11 22:39:23 build #235 of octeon is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/235 **** ENDING LOGGING AT Mon Aug 12 02:59:58 2013