**** BEGIN LOGGING AT Thu Aug 29 02:59:58 2013 Aug 29 10:06:11 nbd: this is what you wanted to see, right? http://pastebin.com/RjgtxPtH Aug 29 10:06:33 right Aug 29 10:06:42 00:0C:42:61:AA:67 is the wds client Aug 29 10:07:05 ok, so there's only a tiny bit of spatial diversity here, not enough for high bitrates Aug 29 10:07:38 this is the other side: http://pastebin.com/E4vq9DXA Aug 29 10:07:52 yeah, pretty similar Aug 29 10:08:05 so bottom line, I need to drill a hole in the ceiling and use gigE :) Aug 29 10:08:35 only if single-stream HT40 isn't enough Aug 29 10:09:01 MCS7 does work very well according to these stats Aug 29 10:09:44 yeah, well ping at least from wds client to wds ap is quite stable Aug 29 10:09:55 26 packets transmitted, 26 packets received, 0% packet loss Aug 29 10:09:55 round-trip min/avg/max = 1.222/1.308/2.130 ms Aug 29 10:10:06 only short test, I know, I could leave it running for a day Aug 29 10:10:12 and use bigger packet size Aug 29 10:10:54 haven't tested online gaming again though Aug 29 10:11:07 1408 bytes from 192.168.50.254: seq=37 ttl=64 time=110.635 ms Aug 29 10:11:29 that's not good if it happens during gaming Aug 29 10:12:20 on the wds ap, which is also the router, I configured qos to give priority to traffic to/from the xbox Aug 29 10:12:38 but can I also do that on the WDS link ? Aug 29 10:12:56 not with qos-scripts I suspect Aug 29 10:21:06 it should only be necessary on the WDS link if that link is the bottleneck Aug 29 11:27:24 patching the kernel is a pita.. Aug 29 12:47:07 build #333 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/333 Aug 29 12:51:33 build #333 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/333 Aug 29 12:53:25 luka: yea or nay? http://patchwork.openwrt.org/patch/3966/ Aug 29 12:53:27 luka: it's in mainline now: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/drivers/net/usb/hso.c Aug 29 13:56:44 my mail client is so bogus my stomach aches, I don't know if it's wrapping lines or not, can I send a patch to someone here that can verify it is ok before sending to the list? thanks Aug 29 14:06:01 use git-send-email ? Aug 29 14:14:23 stintel I'm actually using git imap-send, to be able to edit before send the message, but the principle is the same.. I'm worried about who will receive it Aug 29 15:26:53 I'm starting to think patches are not my thing, specially with git, meh.. Aug 29 15:44:17 nbd: fyi Aug 29 15:44:18 20020 packets transmitted, 20020 packets received, 0% packet loss Aug 29 15:44:18 round-trip min/avg/max = 1.001/1.674/111.391 ms Aug 29 15:49:11 build #346 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/346 Aug 29 18:30:24 hi, I'm just following up on my patch submission for asio https://dev.openwrt.org/ticket/13902 Aug 29 18:31:01 can anybody comment on this, do I have to do anything else so it can be accepted in OpenWRT? Aug 29 18:37:41 pocock: send patch to the mailing list please Aug 29 19:02:04 build #365 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/365 Aug 29 19:04:00 build #315 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/315 Aug 29 19:10:53 luka: I did that a year ago, the mailing list link is in the ticket Aug 29 21:09:33 build #325 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/325 Aug 29 21:50:03 is there a way to get EXTROOT mounting without specifying the uuid on the config 'mount' section Aug 29 21:51:13 for example, please see my stab config: http://pastebin.ubuntu.com/6041922/ Aug 29 21:52:17 you can see i have two USB sticks, but I can't just randomly connect them into the box. I have to change their uuid in the mount, then reboot and insert the correct USB Aug 29 21:53:57 build #276 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/276 Aug 29 22:21:15 nbd r37856 trunk/package/network/config/netifd/Makefile Aug 29 22:21:16 netifd: update to the latest version, fixes a bridge handling corner case on config reload Aug 29 22:26:03 nice, nbd working late heheh Aug 29 22:56:46 nbd: so I noticed issues when running an "IPTV" app on an android tablet that was connected to the 2nd radio of the WDS client. I was able to fix that by repositioning the antennas. made me think if something similar could cause only 1 spatial stream to be used in the wds link .. Aug 29 22:57:19 the WDS client is a stationbox with 2 5GHz panel antennas, but they are right next to eachother, with maybe a few mm overlap even Aug 29 22:57:22 same direction Aug 29 22:57:32 could that also cause "not enough spatial diversity" ? Aug 29 22:57:49 (sorry to keep bothering you with questions but you seem like quite the expert here ;)) Aug 29 23:07:04 luka r37857 trunk/package/boot/uboot-envtools/ (5 files in 2 dirs) * [package] uboot-envtools: update to v2013.07 Aug 29 23:07:05 luka r37858 trunk/package/ boot/uboot-imx6/patches/100-wandboard-enable-fit.patch boot/uboot-imx6/patches/110-wandboard-owrt-env.patch boot/uboot-imx6/Makefile boot/uboot-imx6/patches/110-wandboard-owrt-env-patch * [package] uboot-imx6: update to v2013.07 Aug 29 23:07:07 luka r37859 trunk/target/linux/imx6/Makefile * imx6: add uboot-envtools to default packages Aug 30 00:06:13 pocock: are you also volunteering to maintain that package? Aug 30 01:02:44 build #278 of ep93xx is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/ep93xx/builds/278 Aug 30 02:55:35 blogic good morning, just to inform that I've send the flashchip patch to the mailing list in git format and if someone commits, I will be ready to test your pinctrl driver, thanks for your efforts **** ENDING LOGGING AT Fri Aug 30 02:59:58 2013