**** BEGIN LOGGING AT Fri Nov 15 02:59:59 2013 Nov 15 03:26:43 * groz1 wonders what erlang package is Nov 15 07:14:45 build #10 of mvebu is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/10 Nov 15 08:23:48 juhosg r38812 trunk/target/linux/ar71xx/base-files/etc/ hotplug.d/firmware/10-ath9k-eeprom uci-defaults/02_network * ar71xx: wndr4300: set official mac addresses Nov 15 10:13:09 juhosg r38813 trunk/target/linux/ ar71xx/patches-3.10/634-MIPS-ath79-add-TL-WR842N-v2-support.patch ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c * ar71xx: Add kernel support for the WR842N/ND v2 Nov 15 10:13:12 juhosg r38814 trunk/target/linux/ (5 files in 4 dirs) * ar71xx: add user space support for the TL-WR842N/ND v2 Nov 15 10:13:13 juhosg r38815 trunk/target/linux/ar71xx/image/Makefile * ar71xx: add profile for the WR842N/ND v2 Nov 15 10:51:38 build #320 of adm5120 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/320 Nov 15 11:22:55 hmmm, is DFS supposed to work with ath9k in BB r38811? Nov 15 11:34:35 probably missing some hostapd changes Nov 15 11:34:50 i plan on taking care of those soon Nov 15 11:34:54 ah ok Nov 15 11:35:11 I might have a go at it myself Nov 15 11:46:01 isnt some DFS scan already active in hardware ? because of the iw phy phy0 output and the DFS lines there ? Nov 15 11:57:56 yeah but it seems to have no effect on the regulatory stuff yet Nov 15 12:25:06 kaloz r38816 trunk/target/linux/omap/ (50 files) * [omap]: replace the TI patch with a smaller patchset Nov 15 13:06:30 build #428 of ppc40x is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/428 Nov 15 15:09:39 Fri Nov 15 16:08:24 2013 user.notice firewall: Reloading firewall due to ifup of wan6 () Nov 15 15:09:50 every minute, I remember a discussion about that here Nov 15 15:09:56 was there a solution in the making ? Nov 15 15:10:06 or "silencing" rather :P Nov 15 15:12:33 wigyori ping Nov 15 15:14:10 ah cool, edgerouter lite is supported in trunk Nov 15 15:14:28 groz: o hai Nov 15 15:14:53 You pushed the most recent cubie stuff, I'm going to build and set it up later this morning Nov 15 15:15:08 anything in particular to be aware of, or need feedback / help with ? Nov 15 15:15:33 groz: if you could check the spl+uboot image that'd be great Nov 15 15:15:51 I will be checking that once I have svn up and built, get mine going Nov 15 15:16:01 one thing to be aware is that the default uboot load scripts are not changed yet, so you'll very likely need to do the initramfs/dtb load by hand Nov 15 15:16:09 should I start with initramfs, or, do you expect it to 'just work' off of the sd card too ? Nov 15 15:16:30 no sdcard at the mo, got a guy working on it, but you can boot it off usb if you'd like Nov 15 15:16:34 yah, I've played with cubie before, and had my uboot set to just wait for me to do things manually Nov 15 15:16:42 iirc the cubie got emac as well, that should work too if you want nfsroot Nov 15 15:17:04 (not sure if I left the nfsroot support in the default config though) Nov 15 15:17:15 hehe, to be honest, just a netboot with o storage would be useful for me Nov 15 15:17:41 but, I'll be playing with it in a couple hours, got a couple small other things I gotta get done this morning first Nov 15 15:17:43 until we'll have the sd/mmc working, i can put nfsroot back into default Nov 15 15:17:46 then I'll have time for it Nov 15 15:18:02 great - let me know if anything comes up Nov 15 15:18:03 I would love to replace my eeepc in the observatory with the cubieboard Nov 15 15:18:19 and that'll give it a good long run test, it streams a camera for all dark hours Nov 15 15:18:40 It'll have my all-sky camera attached, so, thoroughly exercise usb etc Nov 15 15:19:05 nice one - btw for the sake of my curiosity, is that available online somewhere? Nov 15 15:19:15 usb camera, sending data back to the house over ethernet Nov 15 15:19:31 is which avaialable ? the camera ? Nov 15 15:19:37 yep, the stream Nov 15 15:19:56 oh, no, not the stream, is not a standard format Nov 15 15:20:22 gotcha, okay Nov 15 15:21:00 http://youtu.be/9-FL_brgZ6M Nov 15 15:21:00 that's the end result Nov 15 15:21:14 it starts as 16 bit fits files, coming from the camera, currently runs 5 second exposures Nov 15 15:21:14 that video was 15 second exposures Nov 15 15:21:33 I have a pipeline here that takes fits files, compresses them to 8 bit jpegs Nov 15 15:21:40 then glues them into a movie the next morning Nov 15 15:22:01 and working on a program that analyzes the 16 bit fits files for meteor detection Nov 15 15:22:27 a-ha, so that's why Nov 15 15:22:39 I know of one vendor, currently designing a camera, based on the A10 Nov 15 15:22:56 so, when that camera comes out, I can run the whole works, on camera Nov 15 15:23:19 they will have the sensor interfaced to the A10, along with all the other bits to make it a network camera Nov 15 15:23:52 http://www.sxccd.com/oculus-all-sky-camera Nov 15 15:23:57 that's the one I use right now Nov 15 15:25:13 just checking the brochure Nov 15 15:25:54 does it do the heater through usb as well? Nov 15 15:26:00 ah, not Nov 15 15:26:06 separate, okay Nov 15 15:27:20 nice one - i guess the price is not that low for this complete package Nov 15 15:27:41 no, it's not cheap Nov 15 15:27:53 but, I already use cameras from SX for our telescopes Nov 15 15:28:01 so all of my programs 'just worked' Nov 15 15:28:12 I wrote the original sx drivers for the indi project Nov 15 15:28:25 and have most of indi building on openwrt now Nov 15 15:28:44 in the next couple of weeks, I'll be pushing openwrt makefiles back into the indi repository Nov 15 15:29:09 my wife and I just bought a new home, and are going to build a proper observatory on the back acre Nov 15 15:29:30 which will house 2 telescopes, and, everything will be managed by openwrt based gadgets out there Nov 15 15:29:55 right now, that is just mounted on a building that was already here when we bought the place in August Nov 15 15:30:40 the dew heater on that one is a bit strong, creates significant heat gradients on the sensor Nov 15 15:30:43 so, I have it plugged into a web power switch, and run it 2 minutes on, 2 minutes off Nov 15 15:31:03 it keeps the dew off nicely, and I don't get the heat gradients Nov 15 15:33:29 here is an example of a raw frame out of that one, without all the youtube encoding artifacts Nov 15 15:33:32 http://s37.photobucket.com/user/grozzie2/media/Astro/1675.jpg.html Nov 15 15:33:51 that particular frame is very interesting, it has two meteors in it, going in two different directions Nov 15 15:33:57 that was a 5 second exposure Nov 15 15:34:43 i was thinking about setting up something similar with gphoto and a cheaper camera - but once i got through the paces, it turned out to be freakin noisy Nov 15 15:34:48 which i should have had expected, but still Nov 15 15:34:59 yup, that's why I bought this one Nov 15 15:35:17 it's spendy, but, pay once, job done, nice clean data Nov 15 15:35:23 yeah Nov 15 15:35:24 :) Nov 15 15:35:36 the folks at qhy have cheaper options, based on qhy5 camera with a fisheye lens Nov 15 15:35:43 but, the qhy5 is still quite noisy Nov 15 15:36:00 it's an mt9m001 sensor, we have two of them that we use for guide cameras on the telescopes Nov 15 15:36:14 yeah - probably the only thing you'll get is that it's a complete package, and you don't have to diy Nov 15 15:36:37 http://s37.photobucket.com/user/grozzie2/media/Astro/C8_Kwiq.jpg.html?sort=3&o=9 Nov 15 15:36:48 that shows the qhy5 in a 9x50 finderscope Nov 15 15:37:16 and yes, that's the big plus buying the sx piece too, it's 'all done', no diy fuss trying to fix things Nov 15 15:37:23 just plug it in, turn it on, and write a program Nov 15 16:27:04 tripolar r38817 packages/lang/erlang/ Makefile patches/101-emulator_includes.patch Nov 15 16:27:04 This fixes the Erlang package so that libraries for Erlang can easily be Nov 15 16:27:04 packaged for OpenWRT. Nov 15 16:27:04 This means: Nov 15 16:27:05 - static libraries and include files for compiling NIFs are copied in the Nov 15 16:27:08 build environment to usr/{lib,include} Nov 15 16:27:10 - crypto is enabled in host Erlang build so that rebar can be used without Nov 15 16:27:13 further patching Nov 15 16:27:15 Version is bumped and 101-emulator_includes.patch is modified so that R16B02 Nov 15 16:27:18 compiles correctly. Nov 15 16:27:21 Signed-off-by: Barnabás Králik > Nov 15 16:30:53 build #459 of at91 is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/459 Nov 15 17:18:53 nbd: that WZR-HP-G300NH with AA and aa-mac80211.git r38399 is rejecting my client device again, tkip still disabled, anything you want me to check or just forget about it and try mac80211 from trunk instead ? Nov 15 17:20:30 (BE): qnum: 2 qdepth: 0 ampdu-depth: 0 pending: 123 stopped: 1 Nov 15 17:20:35 that 123 seems stuck Nov 15 17:21:11 iw wlan0 station dump shows no clients though Nov 15 17:21:15 so can't remove it either Nov 15 18:18:46 KanjiMonster: what do you think about that patches? Nov 15 18:22:54 On a different topic: Which is the problem or what i'm doing wrong here: https://dev.openwrt.org/ticket/14349? Nov 15 18:23:31 maybe is not possible with lantiq and i'm loosing time Nov 15 18:25:48 i could not get ethernet to work properly at all in AA Nov 15 18:27:34 reset: ??? Nov 15 18:27:35 enable_vlan: ??? Nov 15 18:27:39 those 2 look weird Nov 15 18:29:08 yes, but is what swconfig tells Nov 15 18:29:17 yes Nov 15 18:29:48 the same happens with trunk :( Nov 15 18:54:29 blogic: what do you think if it try after applying this patch: http://patchwork.openwrt.org/patch/4399/? Nov 15 18:55:01 *if i try Nov 15 18:55:24 anyone know how to iterate over variables passed to a gmake function? - someting like foreach(itme,$(ARGV),echo $(item)) - which doesn't of course work Nov 15 19:35:28 Pteridium: nope that wont help Nov 15 19:35:44 i will merge said patch tonight though Nov 15 19:35:44 :( Nov 15 19:35:45 or tomorrow, need to soo ho wi progress Nov 15 19:36:01 ping me about it next week i'll have more time to look at it then Nov 15 19:36:45 ok, no problem. I'll do as you said Nov 15 19:36:48 thanks Nov 15 19:43:36 blogic: take in mind that i'm the only person (i think) that uses the arv4518 as router only :$ Nov 15 19:44:37 although there are some lantiq routers with wifi n and the rtl8306switch Nov 15 19:45:21 so it is a minor problem Nov 15 19:46:07 and i'm sure that all of you have more interesting things in mind Nov 15 20:12:18 build #407 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/407 Nov 15 20:14:21 build #407 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/407 Nov 15 22:02:31 build #443 of orion is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/443 Nov 15 22:59:19 build #378 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/378 Nov 16 01:30:08 build #432 of ramips is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/432 **** ENDING LOGGING AT Sat Nov 16 02:59:59 2013