**** BEGIN LOGGING AT Fri Nov 29 02:59:58 2013
Nov 29 03:18:32 <russell--> blogic: remote syslog is broken (since recently)
Nov 29 03:52:22 <builder> build #457 of orion is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/457
Nov 29 04:01:40 <builder> build #389 of sibyte is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/389
Nov 29 08:08:27 <builder> build #19 of mxs is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/mxs/builds/19
Nov 29 08:47:33 <heffer> nbd: a miracle happened!
Nov 29 08:48:02 <heffer> don't know if you remember my problems with getting the switch to work on the WD My Net N750
Nov 29 08:48:15 <heffer> but WD have now actually complied with my source code request for the bootloader
Nov 29 08:48:23 <heffer> and it's actually the code that is run on the board
**** BEGIN LOGGING AT Fri Nov 29 09:18:37 2013
Nov 29 09:26:14 <OpenWrt-Commits> kaloz r38939 trunk/toolchain/Config.in * enable using soft-float regardless of having a fpu
Nov 29 10:28:07 <OpenWrt-Commits> kaloz r38940 trunk/ include/target.mk target/linux/bcm53xx/Makefile * there's no such thing as a soft fpu, this target should be fine without these
Nov 29 10:35:54 <nbd> heffer: wow, nice
Nov 29 10:38:18 <blogic> heffer: one small step for nerd, when giant leap for nerdkind :-)
Nov 29 10:38:31 <builder> build #337 of iop32x is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/337
Nov 29 10:38:43 <heffer> bootloader is found here: http://support.wdc.com/product/download.asp?groupid=1702&sid=178&lang=en
Nov 29 10:38:53 <heffer> now i just need to find out what they broke
Nov 29 10:39:08 <heffer> grep -R ALPHA is very useful :D
Nov 29 10:39:18 <heffer> at least they marked many parts
Nov 29 10:39:27 <heffer> okay. off for lunch. brb
Nov 29 10:39:34 <blogic> its 11:30
Nov 29 10:39:41 <blogic> you are an hour early ;)
Nov 29 10:39:58 <heffer> i work at a huge company. that's how we roll :P
Nov 29 10:40:23 <blogic> pfff
Nov 29 10:46:05 <OpenWrt-Commits> kaloz r38941 trunk/include/target.mk * ignore the fpu if we're doing soft-float
Nov 29 10:48:01 <builder> build #399 of avr32 is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/399
Nov 29 11:00:42 <OpenWrt-Commits> kaloz r38942 trunk/target/linux/omap/Makefile * [omap]: tunr on some additional features
Nov 29 11:01:52 <OpenWrt-Commits> kaloz r38943 trunk/ rules.mk package/boot/uboot-sunxi/Makefile package/boot/uboot-omap/Makefile include/target.mk
Nov 29 11:01:52 <OpenWrt-Commits> FPU type should not interfere with the ABI selection.
Nov 29 11:01:52 <OpenWrt-Commits> Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Nov 29 11:01:52 <OpenWrt-Commits> Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Nov 29 12:01:14 <stintel> hmmm, now one of my clients' IPv6 traffic isn't forwarded from lan to wan
Nov 29 12:01:18 <stintel> but for other hosts it works fine
Nov 29 12:01:38 <stintel> tcpdump sees packets from the client on br-lan but not going out on eth0.20 :/
Nov 29 13:08:15 <builder> build #20 of mvebu is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/20
Nov 29 13:13:48 <Devastator_> zajec__ out of curiosity, why did you ask power led color of WRT310N v1? hehe
Nov 29 13:41:03 <zajec__> Devastator_: just to document it
Nov 29 13:41:08 <zajec__> Devastator_: really, no other reason :)
Nov 29 13:41:21 <zajec__> just to write it down in the code
Nov 29 13:41:25 <Devastator_> zajec__ oh, did I forgot to comment the power led color?
Nov 29 13:41:39 <Devastator_> s/forgot/forget
Nov 29 13:47:22 <zajec__> if I sent you an e-mail, then probably yes ;)
Nov 29 13:47:24 <zajec__> no worries :)
Nov 29 13:54:41 <Devastator_> zajec__ hehe
Nov 29 13:55:17 <Devastator_> it's a reminder for me to pay more attention next time..
Nov 29 13:56:07 <Devastator_> which I intent to do while playing with my "new" toy
Nov 29 14:29:24 <OpenWrt-Commits> jow r38944 packages/libs/rrdtool-1.0.x/patches/030-pod2man-stderr.patch * rrdtool-1.0.x: make pod2man errors nonfatal (#14479)
Nov 29 15:30:27 <OpenWrt-Commits> heil r38945 packages/net/haproxy/ Makefile patches/0010-MEDIUM-http-add-redirect-scheme-to-ease-HTTP-to-HTTP.patch
Nov 29 15:30:27 <OpenWrt-Commits> package: haproxy - [PATCH 10/10] MEDIUM: http: add "redirect scheme" to ease HTTP to
Nov 29 15:30:27 <OpenWrt-Commits>  HTTPS redirection
Nov 29 17:26:00 <russell--> remote syslog starts, opens a udp socket to remote host, but nothing leaves according to tcpdump
Nov 29 17:26:45 <russell--> stopping/starting /etc/init.d/log doesn't help
Nov 29 17:31:53 <russell--> PIDCOUNT is (apparently) undefined
Nov 29 17:39:37 <russell--> ah, looks like the script doesn't use udp
Nov 29 17:41:42 <russell--> hmm, not sure, it does work when i restart logread manually
Nov 29 17:45:15 <russell--> it does get the -u, so that wasn't it
Nov 29 17:46:30 <russell--> if i kill just the logread command and restart it manually (same command line as the init.d script uses) it works, maybe some kind of timing problem between logd and logread?
Nov 29 17:49:47 <russell--> /sbin/logread -f -r $remote_host 514 -p /var/run/logread..pid -u
Nov 29 19:33:21 <v0n> what's the best way to set the net.ipv6.conf.default.forwarding to 0 in my build?
Nov 29 19:34:38 <v0n> adding my own /etc/sysctl.conf in my target base-files package?
Nov 29 20:20:42 <OpenWrt-Commits> juhosg r38946 trunk/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c * ar71xx: Kernel support update tl-wr842n_v2 added missing usb led
Nov 29 20:20:43 <OpenWrt-Commits> juhosg r38947 trunk/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds * ar71xx: user space support update tl-wr842n_v2 add default led support
Nov 29 20:20:44 <OpenWrt-Commits> juhosg r38948 trunk/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch * ag71xx: add F1E specific feature bit definitions to AR934X register file
Nov 29 20:20:45 <OpenWrt-Commits> juhosg r38949 trunk/target/linux/ ar71xx/patches-3.10/632-MIPS-ath79-add-MyNet-Wifi-Range-Extender-support.patch ar71xx/files/arch/mips/ath79/mach-mynet-rext.c * ar71xx: improve support for the My Net Wi-Fi Range Extender device
Nov 29 20:20:47 <OpenWrt-Commits> juhosg r38950 trunk/target/linux/ar71xx/generic/profiles/wd.mk * ar71xx: rssi leds for My Net WiFi Range Extender
Nov 29 20:20:51 <OpenWrt-Commits> juhosg r38951 trunk/target/linux/generic/files/drivers/net/phy/ar8216.c * generic: ar8216: remove trailing whitespaces
Nov 29 20:20:54 <OpenWrt-Commits> juhosg r38952 trunk/target/linux/ generic/files/drivers/net/phy/ar8216.c generic/files/drivers/net/phy/ar8216.h * generic: ar8216: add AR8337N switch support
Nov 29 20:20:58 <OpenWrt-Commits> juhosg r38953 trunk/target/linux/ar71xx/base-files/etc/uci-defaults/02_network * ar71xx: fix switch port map for the Sitecom WLR-8100
Nov 29 20:21:01 <OpenWrt-Commits> juhosg r38954 trunk/target/linux/ ar71xx/generic/profiles/sitecom.mk ar71xx/image/Makefile * ar71xx: add profile and build image for the Sitecom WLR-8100
Nov 29 20:33:06 <mazilo> ping florian
Nov 29 20:35:58 <builder> build #329 of mcs814x is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/mcs814x/builds/329
Nov 29 20:53:13 <OpenWrt-Commits> juhosg r38955 trunk/target/linux/ ar71xx/config-3.10 ar71xx/patches-3.10/635-MIPS-ath79-add-TL-WR1043NDv2-suport.patch ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c * ar71xx: add kernel support for the TL-WR1043ND v2 board
Nov 29 20:53:15 <OpenWrt-Commits> juhosg r38956 trunk/target/linux/ (5 files in 4 dirs) * ar71xx: add user-space support for the TL-WR1043ND v2 board
Nov 29 20:53:16 <OpenWrt-Commits> juhosg r38957 trunk/tools/firmware-utils/src/mktplinkfw.c * firmware-utils/mkplinkfw: add TL-WR1043ND v2 support
Nov 29 20:53:17 <OpenWrt-Commits> juhosg r38958 trunk/target/linux/ar71xx/image/Makefile * ar71xx: build image for the TL-WR1043ND v2 board
Nov 29 21:34:35 <v0n> # /etc/init.d/network start Command failed: Not found
Nov 29 21:36:12 <v0n> in latest trunk
Nov 29 21:38:54 <v0n> /etc/init.d/network does a ubus call service set { "name": "network", "script": "\/etc\/init\/... which fails, because "ubus call service set" is not valid
Nov 29 21:39:00 <v0n> Cc: nbd
Nov 29 21:42:04 <blogic> v0n: call "ubus list -v" and paste the output please
Nov 29 21:42:29 <v0n> blogic: empty
Nov 29 21:43:35 <blogic> ?
Nov 29 21:44:18 <heffer> even with the u-boot source i have no clue what is going on with this damn AR8327N switch
Nov 29 21:44:41 <v0n> blogic: ??
Nov 29 21:45:01 <v0n> blogic: the command you said (ubus list -v) doesn't return anything
Nov 29 21:45:09 <blogic> ah
Nov 29 21:45:25 <blogic> a sentence can say so much more than a single word
Nov 29 21:45:29 <v0n> missing package/depedencies ?
Nov 29 21:45:43 <blogic> and we are back to words
Nov 29 21:45:47 <v0n> blogic: same for a single '?' ;)
Nov 29 21:46:01 <blogic> i wanted to make it understandable for you
Nov 29 21:46:08 <v0n> yep
Nov 29 21:46:16 <blogic> so call ps please
Nov 29 21:46:36 <blogic> and tell me a bit about what board you have
Nov 29 21:46:41 <blogic> did you modify anything ?
Nov 29 21:46:45 <blogic> install extra packages ... etc
Nov 29 21:47:13 <v0n> yep, this is a custom board, based on DaVinci (AM1808, similar to DA850)
Nov 29 21:47:22 <v0n> with trunk OpenWRT
Nov 29 21:47:36 <v0n> The Linux support is fine, ipv6 works fine
Nov 29 21:48:03 <v0n> but /etc/init.d/network <command> fails with Command failed: Not found
Nov 29 21:48:40 <v0n> I added "set -x" to this script and I saw that this "ubus call service set" command fails/doesn't exist
Nov 29 21:51:22 <v0n> blogic: you know everything! :)
Nov 30 00:18:42 <russell--> blogic: so, like where does PIDCOUNT come from in /etc/init.d/log ?
Nov 30 00:19:27 <russell--> git grep shows in the dropbear config too, but actually defined.  otherwise, not found.
Nov 30 00:19:41 <russell--> dropbear init script, rather
Nov 30 00:32:06 <builder> build #433 of uml is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/433
Nov 30 00:38:31 <builder> build #421 of rb532 is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/421
Nov 30 00:44:46 <builder> build #421 of ppc44x is complete: Failure [failed shell_12]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/421
**** ENDING LOGGING AT Sat Nov 30 02:59:59 2013