**** BEGIN LOGGING AT Thu Dec 26 02:59:59 2013 Dec 26 06:34:27 build #402 of ixp4xx is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/ixp4xx/builds/402 Dec 26 07:39:41 build #431 of ar7 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ar7/builds/431 Dec 26 08:33:53 build #385 of ar71xx is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/ar71xx/builds/385 Dec 26 08:53:51 build #406 of xburst is complete: Failure [failed compile_9] Build details are at http://buildbot.openwrt.org:8010/builders/xburst/builds/406 Dec 26 12:49:54 build #475 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/475 Dec 26 14:21:26 build #330 of mpc52xx is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/mpc52xx/builds/330 Dec 26 15:10:54 there is some issue on ath9k having two wireless networks on current trunk Dec 26 15:11:28 a AP and STA simultaneously on the WRT160NL, the STA works fine but the AP does not show up Dec 26 15:11:40 what kind of logs should I collect? Dec 26 15:13:39 http://pastebin.com/JsZSTRiu Dec 26 15:15:04 http://pastebin.com/ZP6uidcT Dec 26 15:16:14 http://pastebin.com/E4Ehs34F Dec 26 16:48:23 hello Dec 26 16:48:42 is there a way to make owrt running on a 4mb device with samsung s3c45 cpu? Dec 26 18:02:22 build #349 of adm5120 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/adm5120/builds/349 Dec 26 18:05:28 build #439 of rb532 is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/439 Dec 26 18:08:34 build #439 of ppc44x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/439 Dec 26 18:29:26 build #314 of octeon is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/octeon/builds/314 Dec 26 19:27:10 hey all, are there any boards with a working RT3062F wireless chip? Dec 26 19:27:47 I'm trying to get it working on 2 different boards but I can't get the radio to come up Dec 26 19:29:28 tried with and without eeprom with no results Dec 26 19:30:01 and I'm starting to think that I'm forgetting something a lot simpler Dec 26 19:40:02 vampo_: it works on a few lantiq boards Dec 26 19:40:08 which board do you have ? Dec 26 19:40:34 I have the zyxel P2812 Dec 26 19:40:51 and an Arcadyan ARV7519 Dec 26 19:41:53 it wors on a803 afaik Dec 26 19:42:00 on the arv7519 the eeprom is on the flash but even that doesn't help Dec 26 19:42:00 i'll verify it the next days Dec 26 19:42:14 what exactly does not work ? Dec 26 19:42:40 is there anything special needed other than the pci module and the ralink_eep section on the dts? Dec 26 19:42:57 does the driver load ? Dec 26 19:43:14 show me a bootlog please Dec 26 19:43:24 it all gets recognised and everything reports fine but the AP is not visible by anything Dec 26 19:44:01 should I drop it here? Dec 26 19:45:05 [ 9.672000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) Dec 26 19:45:06 [ 9.676000] rt2800pci 0000:00:0e.0: failed to load eeprom property Dec 26 19:45:08 [ 9.684000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'RT2860.eeprom'. Dec 26 19:45:09 [ 9.916000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected Dec 26 19:45:11 [ 9.920000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0002 detected Dec 26 19:45:38 [ 21.592000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' Dec 26 19:45:40 [ 21.624000] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34 Dec 26 19:52:01 build #461 of ppc40x is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/461 Dec 26 20:00:33 vampo: looks good Dec 26 20:00:47 but you dont see beacons ? Dec 26 20:00:56 hehe yes, the log does look good Dec 26 20:01:05 nope, nothing Dec 26 20:01:19 both boards behave the same Dec 26 20:01:47 i have the same problem w/ rt2x00 but i also have an unsupported pci-e variant Dec 26 20:01:53 (on the router) Dec 26 20:02:18 that is, driver thinks everything is great, but card doesn't transmit or receive Dec 26 20:04:07 I even tried messing about with GPIOs in case the radios have a power switch of some sort Dec 26 20:05:41 i suspect the current driver is missing some initialization sequence that isn't needed for all devices Dec 26 20:07:07 this is the only mention that I have found mentioning that it's broken Dec 26 20:07:09 https://dev.openwrt.org/ticket/14100 Dec 26 21:20:07 build #498 of brcm63xx is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/brcm63xx/builds/498 Dec 26 21:22:54 build #409 of sibyte is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/409 Dec 26 21:31:18 build #476 of orion is complete: Failure [failed compile_8] Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/476 Dec 26 22:19:44 build #462 of ppc40x is complete: Failure [failed shell_14] Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/462 Dec 26 22:21:54 kaloz r39164 trunk/package/devel/binutils/Makefile * [package/binutils]: handle the Linaro version as well Dec 26 23:10:50 build #39 of mxs is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/mxs/builds/39 Dec 26 23:24:56 hauke r39165 trunk/target/linux/ (9 files in 2 dirs) * kernel: bgmac: update patches Dec 26 23:28:42 build #474 of atheros is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/atheros/builds/474 Dec 26 23:29:02 build #419 of avr32 is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/419 Dec 26 23:30:17 hauke r39166 trunk/target/linux/ (16 files in 2 dirs) * brcm47xx: b44: This updates the phylib patches to the version send upstream Dec 26 23:32:35 hauke r39167 trunk/target/linux/ brcm47xx/patches-3.10/208-b44-use-fixed-PHY-device-if-we-do-not-find-any.patch brcm47xx/patches-3.10/170-fix-74k-cpu.patch brcm47xx/patches-3.10/830-huawei_e970_support.patch * brcm47xx: fix cpu wait for BCM4706 Dec 26 23:45:48 build #357 of iop32x is complete: Failure [failed shell_12] Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/357 Dec 27 00:55:35 build #40 of imx6 is complete: Success [build successful] Build details are at http://buildbot.openwrt.org:8010/builders/imx6/builds/40 Dec 27 01:47:50 build #451 of uml is complete: Failure [failed compile_5] Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/451 Dec 27 01:56:02 build #40 of mvebu is complete: Failure [failed compile_4] Build details are at http://buildbot.openwrt.org:8010/builders/mvebu/builds/40 **** ENDING LOGGING AT Fri Dec 27 02:59:58 2013