**** BEGIN LOGGING AT Mon Apr 07 02:59:59 2014
Apr 07 03:14:50 <builder_> build #555 of ramips is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/ramips/builds/555
Apr 07 03:18:27 <builder_> build #571 of orion is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/orion/builds/571
Apr 07 04:05:39 <builder_> build #38 of sunxi is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/sunxi/builds/38
Apr 07 04:17:01 <builder_> build #20 of pxa is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/pxa/builds/20
Apr 07 05:50:26 <builder_> build #594 of at91 is complete: Success [build successful]  Build details are at http://buildbot.openwrt.org:8010/builders/at91/builds/594
Apr 07 06:39:55 * russell-- just bought a pile (14) used netgear wndr3800's, found that 2 of them were broken (bad flash, bad ethernet) and 5 had ~20-30 dB less tx power than normal, but only on 2.4GHz, all were about the same on 5GHz
Apr 07 06:40:38 <builder_> build #551 of ppc40x is complete: Failure [failed shell_15]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc40x/builds/551
Apr 07 06:52:13 <builder_> build #20 of brcm2708 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/brcm2708/builds/20
Apr 07 07:25:51 <builder_> build #20 of omap is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/omap/builds/20
Apr 07 07:26:26 <eigma> russell--: good test devices for new/experimental builds methinks. did you get a good price?
Apr 07 07:28:51 <russell--> eigma: yes, on ebay, i guess i can get my money back on the bad ones, they were claimed to be in "excellent" condition
Apr 07 07:29:08 * russell-- has plenty of test devices already ;-)
Apr 07 07:29:35 * russell-- mostly curious what went wrong with them, why 2.4 and not 5, etc.
Apr 07 07:58:25 <builder_> build #20 of x86_64 is complete: Failure [failed compile_4]  Build details are at http://buildbot.openwrt.org:8010/builders/x86_64/builds/20
Apr 07 08:00:39 <OpenWrt-Commits> nbd r40399 trunk/target/linux/ ar71xx/config-3.10 ar71xx/patches-3.10/707-MIPS-ath79-add-support-for-QCA953x-SoC.patch ar71xx/files/arch/mips/ath79/dev-eth.c * ar71xx: add support for QCA953x SoC
Apr 07 08:00:47 <OpenWrt-Commits> nbd r40400 trunk/target/linux/ (9 files in 8 dirs) * ar71xx: add support for the TP-LINK TL-WR841N/ND v9
Apr 07 08:16:18 <builder_> build #559 of lantiq is complete: Failure [failed shell_15]  Build details are at http://buildbot.openwrt.org:8010/builders/lantiq/builds/559
Apr 07 09:12:43 <tripolar> hi
Apr 07 09:13:56 <tripolar> i'm currently using the unify ap pro - but openwrt only shows me one network card, is the second networkcard not connected or is there another reason that only the primary interface shows up/is working?
Apr 07 09:50:52 <OpenWrt-Commits> nbd r40401 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove support for non-overlayfs overlay fopivot types
Apr 07 09:50:56 <OpenWrt-Commits> nbd r40402 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove jffs2_ready()
Apr 07 09:51:00 <OpenWrt-Commits> nbd r40403 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove pi_include()
Apr 07 09:51:04 <OpenWrt-Commits> nbd r40404 trunk/package/base-files/ files/lib/functions/preinit.sh files/etc/preinit files/lib/functions.sh * /lib/functions.sh: move preinit related functions to /lib/functions/preinit.sh
Apr 07 09:51:08 <OpenWrt-Commits> nbd r40405 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove strtok()
Apr 07 09:51:11 <OpenWrt-Commits> nbd r40406 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove hotplug_dev()
Apr 07 09:56:52 <OpenWrt-Commits> nbd r40407 packages/net/multiwan/files/usr/bin/multiwan * multiwan: remove unnecessary call to config_clear()
Apr 07 10:02:39 <OpenWrt-Commits> nbd r40408 trunk/package/base-files/ files/etc/init.d/boot files/lib/functions.sh * base-files: move uci_apply_defaults() to /etc/init.d/boot
Apr 07 10:02:44 <OpenWrt-Commits> nbd r40409 trunk/package/base-files/files/lib/functions.sh * base-files: remove config_clear() and list_remove()
Apr 07 10:30:26 <OpenWrt-Commits> nbd r40410 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove jffs2_mark_erase()
Apr 07 10:30:32 <OpenWrt-Commits> nbd r40411 trunk/ (8 files in 8 dirs)
Apr 07 10:30:32 <OpenWrt-Commits> /lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh
Apr 07 10:30:35 <OpenWrt-Commits> nbd r40412 trunk/package/base-files/files/lib/functions.sh * /lib/functions.sh: remove config_rename()
Apr 07 10:37:22 <zajec_> nbd: big cleaning? ;)
Apr 07 10:40:27 <nbd> not that big
Apr 07 10:40:31 <nbd> just felt like removing some stuff
Apr 07 10:40:45 <nbd> and maybe reducing ram usage of init scripts a bit
Apr 07 10:43:41 <zajec__> nbd: i was checking minimal RAM usage
Apr 07 10:43:51 <zajec__> nbd: i think OpenWrt went down to 18 MiB at some point
Apr 07 10:44:04 <zajec__> nbd: have you ever tried to lower it even more?
Apr 07 10:44:16 <zajec__> nbd: any idea what eats so much RAM?
Apr 07 10:45:16 <nbd> one way to reduce ram usage is to reduce the squashfs block size
Apr 07 10:45:23 <nbd> but that increases binary image size
Apr 07 10:45:37 <OpenWrt-Commits> nbd r40413 trunk/target/linux/ ar71xx/config-3.10 ar71xx/Makefile
Apr 07 10:45:37 <OpenWrt-Commits> ar71xx: move some always-used led related functionality from kmod packages to the kernel image
Apr 07 10:47:47 <karlp> jow_laptop: is form() in a controller just a trick to put multiple cbi()'s on the same page?
Apr 07 10:48:20 <karlp> I'm trying to read dispatcher.lua and looking at admin/system/startup in particular, which seems to return two CBIs?
Apr 07 10:48:58 <karlp> they're not listed on http://luci.subsignal.org/trac/wiki/Documentation/ModulesHowTo anywhere I can see
Apr 07 11:03:44 <merbanan> what router dsl platforms exist in the market now ?
Apr 07 11:04:12 <merbanan> bcm63xx and lantiq
Apr 07 11:04:16 <merbanan> are there any more ?
Apr 07 11:04:48 <nbd> zajec__: on ar71xx, about 8 MB is eaten up by the kernel + modules
Apr 07 11:05:03 <zajec__> nbd: i'm not sure how to check that
Apr 07 11:05:14 <zajec__> but "Slab" in /proc/meminfo is about 6 MiB on bcm47xx
Apr 07 11:05:25 <nbd> wow, that's a lot
Apr 07 11:05:30 <zajec__> really?
Apr 07 11:05:33 <zajec__> what's included in Slab/.
Apr 07 11:05:37 <zajec__> how to check this?
Apr 07 11:05:41 <nbd> kernel modules and kmalloc
Apr 07 11:06:18 <zajec__> i'll look closer later
Apr 07 11:07:12 <zajec__> nbd: and what about the rest?
Apr 07 11:07:21 <zajec__> nbd: the difference between RAM in use and Slab?
Apr 07 11:07:29 <zajec__> how to verify where it's used?
Apr 07 11:12:50 <OpenWrt-Commits> nbd r40414 trunk/package/network/config/netifd/Makefile
Apr 07 11:12:51 <OpenWrt-Commits> netifd: update to the latest version, fixes a l3_dev handling regression leading to a crash
Apr 07 11:13:24 <nbd> zajec__: Slab is just kmalloc, not physical ram being used for virtual pages
Apr 07 12:18:19 <tripolar> nbd: hello, any idea how i could find out why the unify ap pro only show one network card, allthough it has two?
Apr 07 12:18:45 <nbd> 'network card'?
Apr 07 12:19:16 <tripolar> nbd i only have eth0 - no eth1 - so it only detects one of the two networkcards , at least the device has two networkplugs
Apr 07 12:19:43 <nbd> no idea how the network devices are connected on the uap pro
Apr 07 12:20:00 <nbd> if they're behind a switch, or simply connected to two MACs
Apr 07 12:20:06 <tripolar> okay
Apr 07 12:20:57 <tripolar> thanks
Apr 07 12:55:29 <builder_> build #21 of mpc83xx is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/mpc83xx/builds/21
Apr 07 13:06:48 <nighty-_> nbd: hi , is there someone working on LUCI intergration of 802.11r support ?
Apr 07 13:07:50 <nbd> no idea
Apr 07 13:15:18 <nighty-_> nbd, thanks
Apr 07 15:10:55 <OpenWrt-Commits> blogic r40415 trunk/package/ (5 files in 2 dirs) * fstools: update to latest git HEAD
Apr 07 15:11:00 <OpenWrt-Commits> blogic r40416 trunk/package/base-files/ files/lib/upgrade/common.sh files/lib/preinit/80_mount_root files/etc/init.d/done * base-files: make use of new fstools
Apr 07 15:11:03 <OpenWrt-Commits> blogic r40417 trunk/target/linux/generic/patches-3.10/413-mtd-ubi-forced-detach.patch * kernel: add a ubi forced detach ioctl
Apr 07 15:11:07 <OpenWrt-Commits> blogic r40418 trunk/target/linux/ (5 files in 3 dirs) * lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware
Apr 07 15:11:11 <OpenWrt-Commits> blogic r40419 trunk/target/linux/ramips/dts/WHR-300HP2.dts * ralink: fix WHR-300HP2 mtd size
Apr 07 15:36:05 <OpenWrt-Commits> blogic r40420 trunk/package/base-files/files/lib/upgrade/common.sh * base-files: the ubi tol should be installed when jumping to ram_fs
Apr 07 15:37:26 <builder_> build #20 of adm8668 is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/adm8668/builds/20
Apr 07 16:23:47 <DonkeyHotei> [Mon 2014-04-07 04:03:44 AM PDT] <merbanan> what router dsl platforms exist in the market now ?
Apr 07 16:23:48 <DonkeyHotei> [Mon 2014-04-07 04:04:12 AM PDT] <merbanan> bcm63xx and lantiq
Apr 07 16:23:48 <DonkeyHotei> [Mon 2014-04-07 04:04:16 AM PDT] <merbanan> are there any more ? <------- has no work been done with the ralink/mediatek sources that were released?
Apr 07 16:30:00 <KanjiMonster> DonkeyHotei: merbanan: both realtek and mediatek have written "proprietary code" everywhere; also the code quality sucks. there's also ikanos, but they aren't exactly open either.
Apr 07 16:30:45 <DonkeyHotei> has anyone bothered to ask ralink about that?
Apr 07 16:32:10 <DonkeyHotei> anyway it's sad that 90% of openwrt-able dsl hardware in the wild is broadcom
Apr 07 17:38:59 <Mazilo> As seen here (http://pastebin.com/F57BXryh), I have 'libuuid, uuidd, and uuidgen' packages selected. However, when I tried to manually compile both 'uuid', 'libuuid', and 'uuidd' packages, buildroot gave some error messages.
Apr 07 17:39:18 <builder_> build #527 of rb532 is complete: Failure [failed shell_10]  Build details are at http://buildbot.openwrt.org:8010/builders/rb532/builds/527
Apr 07 17:39:46 <builder_> build #496 of sibyte is complete: Failure [failed shell_10]  Build details are at http://buildbot.openwrt.org:8010/builders/sibyte/builds/496
Apr 07 17:42:22 <builder_> build #434 of iop32x is complete: Failure [failed shell_10]  Build details are at http://buildbot.openwrt.org:8010/builders/iop32x/builds/434
Apr 07 17:43:25 <builder_> build #527 of ppc44x is complete: Failure [failed shell_10]  Build details are at http://buildbot.openwrt.org:8010/builders/ppc44x/builds/527
Apr 07 20:29:40 <builder> build #506 of avr32 is complete: Failure [failed compile_5]  Build details are at http://buildbot.openwrt.org:8010/builders/avr32/builds/506
Apr 07 21:19:11 <swalker> Mazilo: have you tried make package/utils/util-linux/compile?
Apr 08 01:49:07 <builder> build #537 of uml is complete: Failure [failed compile_8]  Build details are at http://buildbot.openwrt.org:8010/builders/uml/builds/537
**** ENDING LOGGING AT Tue Apr 08 02:59:58 2014